Forum Debian Users Gang

oSAlj · 2015-03-25 06:37:53

Witam,

Wczoraj zainstalowałem system na serwerze HP ProLiant G7 N54L. Jest to oczywiscie Debian 7.8.0 amd64.

Teraz mam mały problem z czujnikami temperatury tzn. po wykonaniu komendy sensros dostaję tylko to:

Kod:

k10temp-pci-00c3
Adapter: PCI adaptertemp1:
+37.5°C  (high = +70.0°C)
(crit = +100.0°C, hyst = +95.0°C)

[b]CPU: [/b] AMD Turion(tm) II Neo N54L Dual-Core Processor

[b]KERNEL:[/b] domyślny

Oczywiście do pliku /etc/modules dodałem jc42, tak chciał sensors-detect.

Dosyć mocno zależy mi na tych temperaturach ponieważ chce 2 takie mikroserwery postawić w bardzo małym pomieszczeniu i w ramach testu chciałbym te temperatury dobrze monitorować.

Więcej info moge podrzucić popołudniu

Dziękuje z góry za wszelka pomoc! :)

Jergen · 2015-03-25 10:42:28

Mam taki serwer, ale dziala pod windows server 2012 R2 essentials. Ewentualnie moge z pendriva zbootowac debiana live cd i zobaczyc tak to u mnie wyglada.

Ja dodatkowo zamontowalem chlodzenie na drzwiczkach wg instrukcji [url]http://www.pddesign.com.au/blog/articles/create-your-own-home-server-pg01.php[/url]:

[img]http://www.pddesign.com.au/img/blog/homeserver/n54l-frontdoor-fan.jpg[/img]

Zawsze mozesz takze zasilacz wymienic na pico psu: [url]http://www.thespicers.net/microserver[/url].

oSAlj · 2015-03-25 10:53:59

Jak możesz to sprawdź na tym liveCD. Będę bardzo wdzięczny.

Dodatkowe chłodzenie moge dołożyć, ale i tak wole wiedzieć jakie mam temperatury. Dlatego zależy mi zeby to ogarnac :)

Tutaj wynik sensors-detect

Kod:

# sensors-detect revision 6031 (2012-03-07 17:14:01 +0100)
# System: HP ProLiant MicroServer

This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.

Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no):
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... Success!
(driver `k10temp')
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... No
AMD Family 15h power sensors... No
Intel digital thermal sensor... No
Intel AMB FB-DIMM thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No

Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No

Some systems (mainly servers) implement IPMI, a set of common interfaces
through which system health data may be retrieved, amongst other things.
We first try to get the information from SMBIOS. If we don't find it
there, we have to read from arbitrary I/O ports to probe for such
interfaces. This is normally safe. Do you want to scan for IPMI
interfaces? (YES/no):
Found `IPMI BMC KCS'... Success!
(confidence 8, driver `to-be-written')

Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no):
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No

Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no):
Using driver `i2c-piix4' for device 0000:00:14.0: ATI Technologies Inc SB600/SB700/SB800 SMBus

Next adapter: SMBus PIIX4 adapter at 0b00 (i2c-0)
Do you want to scan it? (YES/no/selectively):
Client found at address 0x18
Probing for `Analog Devices ADM1021'... No
Probing for `Analog Devices ADM1021A/ADM1023'... No
Probing for `Maxim MAX1617'... No
Probing for `Maxim MAX1617A'... No
Probing for `Maxim MAX1668'... No
Probing for `Maxim MAX1805'... No
Probing for `Maxim MAX1989'... No
Probing for `Maxim MAX6655/MAX6656'... No
Probing for `TI THMC10'... No
Probing for `National Semiconductor LM84'... No
Probing for `Genesys Logic GL523SM'... No
Probing for `Onsemi MC1066'... No
Probing for `Maxim MAX1618'... No
Probing for `Maxim MAX1619'... No
Probing for `National Semiconductor LM82/LM83'... No
Probing for `Maxim MAX6654'... No
Probing for `Maxim MAX6690'... No
Probing for `Maxim MAX6680/MAX6681'... No
Probing for `Maxim MAX6695/MAX6696'... No
Probing for `Texas Instruments AMC6821'... No
Probing for `National Semiconductor LM95245'... No
Probing for `National Semiconductor LM64'... No
Probing for `SMSC EMC1047'... No
Probing for `SMSC EMC1402'... No
Probing for `SMSC EMC1403'... No
Probing for `SMSC EMC1404'... No
Probing for `ST STTS424'... No
Probing for `ST STTS424E'... No
Probing for `ST STTS2002'... Success!
(confidence 5, driver `jc42')
Probing for `ST STTS3000'... No
Probing for `NXP SE97/SE97B'... No
Probing for `NXP SE98'... No
Probing for `Analog Devices ADT7408'... No
Probing for `IDT TS3000/TSE2002'... No
Probing for `Maxim MAX6604'... No
Probing for `Microchip MCP9804'... No
Probing for `Microchip MCP98242'... No
Probing for `Microchip MCP98243'... No
Probing for `Microchip MCP9843'... No
Probing for `ON CAT6095/CAT34TS02'... No
Probing for `Atmel AT30TS00'... No
Client found at address 0x50
Handled by driver `eeprom' (already loaded), chip type `eeprom'
(note: this is probably NOT a sensor chip!)

Now follows a summary of the probes I have just done.
Just press ENTER to continue:

Driver `jc42':
* Bus `SMBus PIIX4 adapter at 0b00'
Busdriver `i2c_piix4', I2C address 0x18
Chip `ST STTS2002' (confidence: 5)

Driver `to-be-written':
* ISA bus
Chip `IPMI BMC KCS' (confidence: 8)

Driver `k10temp' (autoloaded):
* Chip `AMD Family 10h thermal sensors' (confidence: 9)

Note: there is no driver for IPMI BMC KCS yet.
Check http://www.lm-sensors.org/wiki/Devices for updates.

To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
jc42
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!

Do you want to add these lines automatically to /etc/modules? (yes/NO)

Unloading cpuid... OK

Ostatnio edytowany przez oSAlj (2015-03-25 17:09:31)

Jergen · 2015-03-25 21:37:11

[quote=oSAlj]Jak możesz to sprawdź na tym liveCD. Będę bardzo wdzięczny.
....[/quote]
Czesc, najpozniej sprawdze to Tobie w weekend - musze przyniesc monitor z garazu, lub wlozyc do serwera karte graficzna, gdyz aktualnie mam z serwerowni podlaczenie do TV tylko przez HDMI (16m).

oSAlj · 2015-03-26 06:40:10

Nie ma problemu.

Powiedz mi jeszcze na tym Windowsie masz moze speedfan lub cos podobnego do pomiaru temperatur i napięć?
Wczoraj sprawdzałem w Biosie i mam podane temperatury: CPU Temp., SYSTEM Temp i NorthBridge Temp.
Rowniez pokazuje napięcia i obroty wentylatora.

BIOS masz oryginalny czy zaktualizowales do modowanego?

Jergen · 2015-03-26 08:24:01

[quote=oSAlj]Nie ma problemu.

Powiedz mi jeszcze na tym Windowsie masz moze speedfan lub cos podobnego do pomiaru temperatur i napięć?
Wczoraj sprawdzałem w Biosie i mam podane temperatury: CPU Temp., SYSTEM Temp i NorthBridge Temp.
Rowniez pokazuje napięcia i obroty wentylatora.

BIOS masz oryginalny czy zaktualizowales do modowanego?[/quote]
Speedfan moge zainstalowac, jesli pojdzie na windows server.

Temperatury w biosie moge sprawdzic jak bede mial monitor lub karte graficzna z hdmi.

Co to biosu to mam modowany, ale teraz nie pamietam o co w nim chodzilo? Moze o to, aby byla mozliwosc bootowania z piatego dysku z wolnego gniazda sata na plycie.

___

Ze speedfan nie powinno byc problemu, gdyz pomylilem serwery i na tym mam win 8.1 pro.
Dodatkowo moge podac Tobie temerature dyskow twardych, gdyz sa one monitorwane na biezaco.

Ostatnio edytowany przez Jergen (2015-03-26 08:24:30)

oSAlj · 2015-03-26 09:01:08

Możesz zarzucić screenem.
Mi tylko pokazuje Temp. procesora (Debian), ale dobre i to.

Modprobe jc42 nie znajduje modułu. Czyli czeka mnie kompilacja jajka czy moze jest inny na to sposób?

Muszę jakos zmusić sensors do pokazywania wszystkich temperatur, napięć i obrotów wentylatora.

Ostatnio edytowany przez oSAlj (2015-03-26 12:55:04)

Jergen · 2015-03-26 18:31:25

Ponizej znajdziesz screeny: SpeedFan oraz StableBit Scanner.

[img]http://i.imgur.com/j8F19DH.png[/img]

[img]http://i.imgur.com/7xWmJKT.png[/img]

___

I jeszcze jeden:

[img]http://i.imgur.com/wfz1IfH.png[/img]

Ostatnio edytowany przez Jergen (2015-03-26 18:33:25)

oSAlj · 2015-03-28 18:11:40

No to mam temperaturę RAMu.

Kod:

root@witched:~# sensors
k10temp-pci-00c3
Adapter: PCI adapter
CPU Temp:     +38.8°C  (high = +70.0°C)
                       (crit = +100.0°C, hyst = +95.0°C)

jc42-i2c-0-18
Adapter: SMBus PIIX4 adapter at 0b00
RAM Temp:     +26.5°C  (low  =  +0.0°C)                  ALARM (HIGH, CRIT)
                       (high =  +0.0°C, hyst =  +0.0°C)
                       (crit =  +0.0°C, hyst =  +0.0°C)

Jeszcze napięcia itp. A możesz mi zrobić screena tego małego gdzie wyszukuje sensory? Może jak będę miał całe info o nich to coś więcej uda mi się skonfigurować.
[url=http://img.osalj.eu/a8f151ac238634d2d81630d2dc869243.png][img]http://img.osalj.eu/thumb/a8f151ac238634d2d81630d2dc869243.png[/img][/url]

Ostatnio edytowany przez oSAlj (2015-03-28 18:13:01)

Renia · 2015-04-08 01:04:23

Takie rzeczy to nie przez lm-sensors, ale ipmi-sensors lub dedykowany soft w rodzaju HP System Health Application.

Ostatnio edytowany przez Renia (2015-04-08 01:14:36)

oSAlj · 2015-04-10 08:58:58

Soft od HP nie działa na Microserwerach.

Zostaje jedynie ipmi-sensors...

Time (s)	Query
0.00010	SET CHARSET latin2
0.00003	SET NAMES latin2
0.00079	SELECT u., g., o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.129.216.15' WHERE u.id=1
0.00064	REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '3.129.216.15', 1732677353)
0.00029	SELECT * FROM punbb_online WHERE logged<1732677053
0.00070	SELECT topic_id FROM punbb_posts WHERE id=285079
0.00177	SELECT id FROM punbb_posts WHERE topic_id=27211 ORDER BY posted
0.00065	SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=27211 AND t.moved_to IS NULL
0.00005	SELECT search_for, replace_with FROM punbb_censoring
0.00136	SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=27211 ORDER BY p.id LIMIT 0,25
0.00088	UPDATE punbb_topics SET num_views=num_views+1 WHERE id=27211
Total query time: 0.00726 s

Forum Debian Users Gang

Ogłoszenie

#1 2015-03-25 06:37:53

oSAlj - Użytkownik

HP ProLiant N54L G7 - problem z lm-sensors

Kod:

#2 2015-03-25 10:42:28

Jergen - Użytkownik

Re: HP ProLiant N54L G7 - problem z lm-sensors

#3 2015-03-25 10:53:59

oSAlj - Użytkownik

Re: HP ProLiant N54L G7 - problem z lm-sensors

Kod:

#4 2015-03-25 21:37:11

Jergen - Użytkownik

Re: HP ProLiant N54L G7 - problem z lm-sensors

#5 2015-03-26 06:40:10

oSAlj - Użytkownik

Re: HP ProLiant N54L G7 - problem z lm-sensors

#6 2015-03-26 08:24:01

Jergen - Użytkownik

Re: HP ProLiant N54L G7 - problem z lm-sensors

#7 2015-03-26 09:01:08

oSAlj - Użytkownik

Re: HP ProLiant N54L G7 - problem z lm-sensors

#8 2015-03-26 18:31:25

Jergen - Użytkownik

Re: HP ProLiant N54L G7 - problem z lm-sensors

#9 2015-03-28 18:11:40

oSAlj - Użytkownik

Re: HP ProLiant N54L G7 - problem z lm-sensors

Kod:

#10 2015-04-08 01:04:23

Renia - Użytkownik

Re: HP ProLiant N54L G7 - problem z lm-sensors

#11 2015-04-10 08:58:58

oSAlj - Użytkownik

Re: HP ProLiant N54L G7 - problem z lm-sensors

Stopka forum

Informacje debugowania