Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
#1 2015-03-28 16:52:31
reemeek - 
Użytkownik
- reemeek
- Użytkownik
- Zarejestrowany: 2013-07-04
Tuner USB-DVBT pod debianem
Zakupiłem w Niemczech dokładnie taki tunerek [url]http://www.terratec.net/details.php?artnr=145259#.VRbC6rUjzWU[/url] sprawdziłem w sklepie szybko przed zakupem kompatybilność z linux'em ze strony [url]http://www.linuxtv.org/wiki/index.php/DVB-T_USB_Devices[/url] lukam, kukam i obczajam tunerek zaznaczony kolorem zielonym, więc do koszyka i do kasy :-) Jednak po podłączeniu do laptopa zonk.. vlc i kaffeine strzela foch'a.. luknąłem szczegółowo
Kod:
root@rmk-notebook:/home/rmk# lsusb Bus 004 Device 003: ID 5986:0295 Acer, Inc Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 048d:9135 Integrated Technology Express, Inc. Zolid Mini DVB-T Stick Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[img]http://www.fotoszok.pl/upload/0649cbe3.jpg[/img]
Kod:
root@rmk-notebook:/home/rmk# uname -a Linux rmk-notebook 3.16.0-4-686-pae #1 SMP Debian 3.16.7-ckt4-3 (2015-02-03) i686 GNU/Linux
Miałem jeszcze nadzieje ze z apt jeszcze ściągnę ale niestety
Kod:
root@rmk-notebook:/home/rmk# aptitude search linux-image i A linux-image-3.12-1-686-pae - Linux 3.12 for modern PCs i A linux-image-3.13-1-686-pae - Linux 3.13 for modern PCs i A linux-image-3.14-1-686-pae - Linux 3.14 for modern PCs p linux-image-3.16.0-4-586 - Linux 3.16 for older PCs i A linux-image-3.16.0-4-686-pae - Linux 3.16 for modern PCs p linux-image-3.16.0-4-686-pae-dbg - Debugging symbols for Linux 3.16.0-4-686-pae p linux-image-3.16.0-4-amd64 - Linux 3.16 for 64-bit PCs p linux-image-486 - Jądro Linux do starszych komputerów (pakiet atrapa) p linux-image-586 - Jądro Linux do starszych komputerów (metapakiet) i linux-image-686-pae - Jądro Linux do nowoczesnych pecetów (metapakiet) p linux-image-686-pae-dbg - Debugging symbols for Linux 686-pae configuration (meta-package) p linux-image-amd64 - Linux for 64-bit PCs (meta-package)
Jeżeli dobrze skojarzyłem wystarczy ,,tylko" (^_-) wkompilować nowszego kernela.. i tu już mi się robi słabo i proszę o pomoc :-)
Offline
#2 2015-03-28 17:26:21
diabolic - Użytkownik
- diabolic
- Użytkownik
- Skąd: okolice Leżajska
- Zarejestrowany: 2007-10-08
Re: Tuner USB-DVBT pod debianem
Ale kernele masz przecież nowsze niż minimalny wymagany, i tutaj akurat nic nie trzeba robić. Sprawdź lepiej czy w katalogu
Kod:
/lib/firmware
masz odpowiedni plik firmwaru dla tej karty. Możesz zapodać jeszcze wynik dmesg, to wtedy będzie wiadomo, czy brakuje pliku firmware dla tej karty.
I am the one who chose my path
Offline
#3 2015-03-28 17:53:34
reemeek - Użytkownik
- reemeek
- Użytkownik
- Zarejestrowany: 2013-07-04
Re: Tuner USB-DVBT pod debianem
Kod:
dmesg
Kod:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt4-3 (2015-02-03)
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000baabefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000baabf000-0x00000000baebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000baebf000-0x00000000bafbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bafbf000-0x00000000baffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 20150/Product Name, BIOS 5ECN42WW(V4.01) 03/14/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x13f600 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BB000000 mask FFF000000 uncachable
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 5 base 100000000 mask FC0000000 write-back
[ 0.000000] 6 base 13F600000 mask FFFE00000 uncachable
[ 0.000000] 7 base 13F800000 mask FFF800000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [c00fe1b0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37200000-0x373fffff]
[ 0.000000] [mem 0x37200000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x371fffff]
[ 0.000000] [mem 0x34000000-0x371fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x33ffffff]
[ 0.000000] [mem 0x20200000-0x33ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x375fdfff]
[ 0.000000] [mem 0x37400000-0x375fdfff] page 4k
[ 0.000000] BRK [0x01796000, 0x01796fff] PGTABLE
[ 0.000000] BRK [0x01797000, 0x01798fff] PGTABLE
[ 0.000000] BRK [0x01799000, 0x01799fff] PGTABLE
[ 0.000000] BRK [0x0179a000, 0x0179afff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35d98000-0x36ec3fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000FE020 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0xBAFFE210 000094 (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 0xBAFFB000 0000F4 (v04 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0xBAFEE000 0099A4 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 0xBAFBB000 000040
[ 0.000000] ACPI: UEFI 0xBAFFD000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 0xBAFFC000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 0xBAFFA000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 0xBAFF9000 00008C (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0xBAFF8000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SLIC 0xBAFED000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0xBAFEC000 0006FE (v01 LENOVO CB-01 00001000 ACPI 00040000)
[ 0.000000] ACPI: BOOT 0xBAFEA000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 0xBAFE5000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0xBAFE3000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0xBAFE2000 0008E4 (v01 LENOVO CB-01 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0xBAFE1000 000A92 (v01 LENOVO CB-01 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0xBAFDE000 002392 (v01 LENOVO CB-01 00001000 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 4224MB HIGHMEM available.
[ 0.000000] 885MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 375fe000
[ 0.000000] low ram: 0 - 375fe000
[ 0.000000] BRK [0x0179b000, 0x0179bfff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x375fdfff]
[ 0.000000] HighMem [mem 0x375fe000-0x3f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xbaabefff]
[ 0.000000] node 0: [mem 0xbafff000-0xbaffffff]
[ 0.000000] node 0: [mem 0x00000000-0x3f5fffff]
[ 0.000000] On node 0 totalpages: 1023579
[ 0.000000] free_area_init_node: node 0, pgdat c1656e40, node_mem_map f35a8020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] Normal zone: 1740 pages used for memmap
[ 0.000000] Normal zone: 222206 pages, LIFO batch:31
[ 0.000000] HighMem zone: 8449 pages used for memmap
[ 0.000000] HighMem zone: 797377 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics stolen memory at 0xbba00000-0xbf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] e820: [mem 0xbfa00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f757b000 s35392 r0 d21952 u57344
[ 0.000000] pcpu-alloc: s35392 r0 d21952 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1021807
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae root=UUID=f822b864-15f7-488d-9492-58041b3ee036 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] CPU0 microcode updated early to revision 0x1b, date = 2014-05-29
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Initializing HighMem for node 0 (000375fe:0013f600)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 4026664K/4094316K available (4594K kernel code, 518K rwdata, 1448K rodata, 656K init, 460K bss, 67652K reserved, 3189508K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xff600000 - 0xff800000 (2048 kB)
vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
.init : 0xc166b000 - 0xc170f000 ( 656 kB)
.data : 0xc147cdc0 - 0xc1669800 (1970 kB)
.text : 0xc1000000 - 0xc147cdc0 (4595 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:2304 nr_irqs:744 16
[ 0.000000] CPU 0 irqstacks, hard=f7008000 soft=f700a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2394.640 MHz processor
[ 0.000034] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.28 BogoMIPS (lpj=9578560)
[ 0.000036] pid_max: default: 32768 minimum: 301
[ 0.000042] ACPI: Core revision 20140424
[ 0.008287] ACPI: All ACPI Tables successfully acquired
[ 0.020421] Security Framework initialized
[ 0.020429] AppArmor: AppArmor disabled by boot time parameter
[ 0.020430] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.020441] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.020443] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.020609] Initializing cgroup subsys memory
[ 0.020613] Initializing cgroup subsys devices
[ 0.020618] Initializing cgroup subsys freezer
[ 0.020621] Initializing cgroup subsys net_cls
[ 0.020625] Initializing cgroup subsys blkio
[ 0.020628] Initializing cgroup subsys perf_event
[ 0.020629] Initializing cgroup subsys net_prio
[ 0.020651] CPU: Physical Processor ID: 0
[ 0.020652] CPU: Processor Core ID: 0
[ 0.020656] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.020659] mce: CPU supports 7 MCE banks
[ 0.020670] CPU0: Thermal monitoring enabled (TM1)
[ 0.020679] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
tlb_flushall_shift: 2
[ 0.020845] Freeing SMP alternatives memory: 20K (c170f000 - c1714000)
[ 0.021755] ftrace: allocating 20730 entries in 41 pages
[ 0.030655] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.031083] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.070802] smpboot: CPU0: Intel(R) Core(TM) i3-3110M CPU @ 2.40GHz (fam: 06, model: 3a, stepping: 09)
[ 0.070808] TSC deadline timer enabled
[ 0.070831] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ 0.070851] ... version: 3
[ 0.070852] ... bit width: 48
[ 0.070853] ... generic registers: 4
[ 0.070854] ... value mask: 0000ffffffffffff
[ 0.070855] ... max period: 0000ffffffffffff
[ 0.070856] ... fixed-purpose events: 3
[ 0.070857] ... event mask: 000000070000000f
[ 0.072104] CPU 1 irqstacks, hard=f7174000 soft=f7176000
[ 0.072105] x86: Booting SMP configuration:
[ 0.072107] .... node #0, CPUs: #1
[ 0.082312] Initializing CPU#1
[ 0.085217] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.085306] CPU 2 irqstacks, hard=f7248000 soft=f724a000
[ 0.085307] #2
[ 0.095569] Initializing CPU#2
[ 0.098537] CPU 3 irqstacks, hard=f727c000 soft=f727e000
[ 0.098540] #3
[ 0.108799] Initializing CPU#3
[ 0.111700] x86: Booted up 1 node, 4 CPUs
[ 0.111704] smpboot: Total of 4 processors activated (19157.12 BogoMIPS)
[ 0.114890] devtmpfs: initialized
[ 0.115083] PM: Registering ACPI NVS region [mem 0xbaebf000-0xbafbefff] (1048576 bytes)
[ 0.115938] pinctrl core: initialized pinctrl subsystem
[ 0.116007] NET: Registered protocol family 16
[ 0.116102] cpuidle: using governor ladder
[ 0.116104] cpuidle: using governor menu
[ 0.116150] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.116151] ACPI: bus type PCI registered
[ 0.116153] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.116235] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.116237] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.116238] PCI: Using MMCONFIG for extended config space
[ 0.116239] PCI: Using configuration type 1 for base access
[ 0.116350] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.116350] mtrr: probably your BIOS does not setup all CPUs.
[ 0.116351] mtrr: corrected configuration.
[ 0.128103] ACPI: Added _OSI(Module Device)
[ 0.128106] ACPI: Added _OSI(Processor Device)
[ 0.128107] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.128108] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.131115] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.142879] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.143710] ACPI: Dynamic OEM Table Load:
[ 0.143718] ACPI: SSDT 0xF7281000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.155985] ACPI: Dynamic OEM Table Load:
[ 0.155992] ACPI: SSDT 0xF7315800 000303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.170905] ACPI: Dynamic OEM Table Load:
[ 0.170911] ACPI: SSDT 0xF7269E00 000119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.180740] ACPI: Interpreter enabled
[ 0.180749] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.180753] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.180765] ACPI: (supports S0 S3 S4 S5)
[ 0.180766] ACPI: Using IOAPIC for interrupt routing
[ 0.180791] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.331108] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.331113] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.331222] \_SB_.PCI0:_OSC invalid UUID
[ 0.331223] _OSC request data:1 1f 0
[ 0.331227] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.331840] PCI host bridge to bus 0000:00
[ 0.331843] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.331845] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.331846] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.331848] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.331850] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
[ 0.331857] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.331939] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.331972] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.332007] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.332043] pci 0000:00:01.1: [8086:0155] type 01 class 0x060400
[ 0.332074] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 0.332104] pci 0000:00:01.1: System wakeup disabled by ACPI
[ 0.332144] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.332154] pci 0000:00:02.0: reg 0x10: [mem 0xd3000000-0xd33fffff 64bit]
[ 0.332160] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.332165] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.332260] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.332283] pci 0000:00:14.0: reg 0x10: [mem 0xd3600000-0xd360ffff 64bit]
[ 0.332355] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.332390] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.332431] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.332455] pci 0000:00:16.0: reg 0x10: [mem 0xd3614000-0xd361400f 64bit]
[ 0.332531] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.332612] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.332863] pci 0000:00:1a.0: reg 0x10: [mem 0xd3619000-0xd36193ff]
[ 1.632288] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 1.632346] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 1.632390] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 1.632407] pci 0000:00:1b.0: reg 0x10: [mem 0xd3610000-0xd3613fff 64bit]
[ 1.632482] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 1.632522] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 1.632562] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 1.632644] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 1.632719] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 1.632803] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 1.632887] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 1.633131] pci 0000:00:1d.0: reg 0x10: [mem 0xd3618000-0xd36183ff]
[ 1.634554] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 1.634609] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1.634649] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 1.634820] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 1.634840] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 1.634848] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
[ 1.634856] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
[ 1.634864] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
[ 1.634872] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 1.634880] pci 0000:00:1f.2: reg 0x24: [mem 0xd3617000-0xd36177ff]
[ 1.634926] pci 0000:00:1f.2: PME# supported from D3hot
[ 1.634995] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 1.635011] pci 0000:00:1f.3: reg 0x10: [mem 0xd3615000-0xd36150ff 64bit]
[ 1.635032] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
[ 1.635164] pci 0000:01:00.0: [10de:1140] type 00 class 0x030200
[ 1.635176] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[ 1.635187] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 1.635198] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 1.635205] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
[ 1.635213] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 1.635276] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 1.640278] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.640283] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 1.640288] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd2ffffff]
[ 1.640294] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 1.640355] pci 0000:00:01.1: PCI bridge to [bus 02]
[ 1.640494] pci 0000:03:00.0: [1969:1090] type 00 class 0x020000
[ 1.640598] pci 0000:03:00.0: reg 0x10: [mem 0xd3500000-0xd353ffff 64bit]
[ 1.640647] pci 0000:03:00.0: reg 0x18: [io 0x2000-0x207f]
[ 1.641139] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.641264] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 1.648323] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 1.648338] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 1.648342] pci 0000:00:1c.0: bridge window [mem 0xd3500000-0xd35fffff]
[ 1.648435] pci 0000:04:00.0: [168c:0032] type 00 class 0x028000
[ 1.648467] pci 0000:04:00.0: reg 0x10: [mem 0xd3400000-0xd347ffff 64bit]
[ 1.648531] pci 0000:04:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 1.648617] pci 0000:04:00.0: supports D1 D2
[ 1.648618] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.648650] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 1.656307] pci 0000:00:1c.1: PCI bridge to [bus 04]
[ 1.656318] pci 0000:00:1c.1: bridge window [mem 0xd3400000-0xd34fffff]
[ 1.656370] pci_bus 0000:00: on NUMA node 0
[ 1.732658] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 1.732706] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 1.732751] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.732796] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 1.732839] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.732884] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 1.732928] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 1.732972] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 1.733067] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 1.733099] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 1.733193] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 1.733195] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.733197] vgaarb: loaded
[ 1.733198] vgaarb: bridge control possible 0000:00:02.0
[ 1.733247] PCI: Using ACPI for IRQ routing
[ 1.734770] PCI: pci_cache_line_size set to 64 bytes
[ 1.734824] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 1.734826] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 1.734827] e820: reserve RAM buffer [mem 0xbaabf000-0xbbffffff]
[ 1.734829] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[ 1.734830] e820: reserve RAM buffer [mem 0x13f600000-0x13fffffff]
[ 1.734974] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.734979] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.737006] Switched to clocksource hpet
[ 1.742255] pnp: PnP ACPI init
[ 1.742270] ACPI: bus type PNP registered
[ 1.742381] system 00:00: [io 0x0680-0x069f] has been reserved
[ 1.742383] system 00:00: [io 0x1000-0x100f] has been reserved
[ 1.742385] system 00:00: [io 0xffff] has been reserved
[ 1.742387] system 00:00: [io 0xffff] has been reserved
[ 1.742389] system 00:00: [io 0x0400-0x0453] could not be reserved
[ 1.742391] system 00:00: [io 0x0458-0x047f] has been reserved
[ 1.742392] system 00:00: [io 0x0500-0x057f] has been reserved
[ 1.742394] system 00:00: [io 0x164e-0x164f] has been reserved
[ 1.742396] system 00:00: [io 0xfd60-0xfd63] has been reserved
[ 1.742399] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.742429] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.742475] system 00:02: [io 0x0454-0x0457] has been reserved
[ 1.742477] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.742505] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.742542] pnp 00:04: Plug and Play ACPI device, IDs SYN073b SYN0700 SYN0002 PNP0f13 (active)
[ 1.813234] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.813237] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.813238] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.813240] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.813242] system 00:05: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 1.813244] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.813246] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.813248] system 00:05: [mem 0xff000000-0xff000fff] has been reserved
[ 1.813250] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
[ 1.813252] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.813254] system 00:05: [mem 0xbfa00000-0xbfa00fff] has been reserved
[ 1.813256] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.813550] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[ 1.813552] system 00:06: [mem 0x40004000-0x40004fff] has been reserved
[ 1.813554] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.813569] pnp: PnP ACPI: found 7 devices
[ 1.813570] ACPI: bus type PNP unregistered
[ 1.813575] PnPBIOS: Disabled by ACPI PNP
[ 1.850152] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 1.850155] pci 0000:04:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 1.850184] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x80000)
[ 1.850186] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.850188] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 1.850191] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd2ffffff]
[ 1.850193] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 1.850197] pci 0000:00:01.1: PCI bridge to [bus 02]
[ 1.850202] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 1.850204] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 1.850210] pci 0000:00:1c.0: bridge window [mem 0xd3500000-0xd35fffff]
[ 1.850220] pci 0000:04:00.0: BAR 6: assigned [mem 0xd3480000-0xd348ffff pref]
[ 1.850222] pci 0000:00:1c.1: PCI bridge to [bus 04]
[ 1.850227] pci 0000:00:1c.1: bridge window [mem 0xd3400000-0xd34fffff]
[ 1.850236] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.850237] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.850239] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.850241] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
[ 1.850242] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 1.850244] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd2ffffff]
[ 1.850246] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 1.850248] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 1.850249] pci_bus 0000:03: resource 1 [mem 0xd3500000-0xd35fffff]
[ 1.850251] pci_bus 0000:04: resource 1 [mem 0xd3400000-0xd34fffff]
[ 1.850308] NET: Registered protocol family 2
[ 1.850505] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 1.850516] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.850529] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.850540] TCP: reno registered
[ 1.850542] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.850546] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.850602] NET: Registered protocol family 1
[ 1.850617] pci 0000:00:02.0: Video device with shadowed ROM
[ 1.881257] pci 0000:03:00.0: set MSI_INTX_DISABLE_BUG flag
[ 1.881273] PCI: CLS 64 bytes, default 64
[ 1.881312] Unpacking initramfs...
[ 2.182885] Freeing initrd memory: 17584K (f5d98000 - f6ec4000)
[ 2.182953] Simple Boot Flag at 0x44 set to 0x1
[ 2.183168] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 2.183211] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x1b
[ 2.183218] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x1b
[ 2.183222] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[ 2.183229] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[ 2.183294] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.183581] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 2.183629] audit: initializing netlink subsys (disabled)
[ 2.183642] audit: type=2000 audit(1427563773.880:1): initialized
[ 2.183972] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.183984] zbud: loaded
[ 2.184094] VFS: Disk quotas dquot_6.5.2
[ 2.184111] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.184162] msgmni has been set to 1669
[ 2.184502] alg: No test for stdrng (krng)
[ 2.184529] bounce: pool size: 64 pages
[ 2.184543] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.184592] io scheduler noop registered
[ 2.184596] io scheduler deadline registered
[ 2.184629] io scheduler cfq registered (default)
[ 2.184789] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 2.184897] pcieport 0000:00:01.1: irq 41 for MSI/MSI-X
[ 2.185160] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.185175] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.185214] intel_idle: MWAIT substates: 0x21120
[ 2.185215] intel_idle: v0.4 model 0x3A
[ 2.185216] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.185413] GHES: HEST is not enabled!
[ 2.185429] isapnp: Scanning for PnP cards...
[ 2.539796] isapnp: No Plug & Play device found
[ 2.539873] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.540296] Linux agpgart interface v0.103
[ 2.540457] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS0] at 0x60,0x64 irq 1,12
[ 2.559180] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.559184] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.559296] mousedev: PS/2 mouse device common for all mice
[ 2.559341] rtc_cmos 00:01: RTC can wake from S4
[ 2.559603] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 2.559632] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 2.559644] Intel P-state driver initializing.
[ 2.559662] Intel pstate controlling: cpu 0
[ 2.559679] Intel pstate controlling: cpu 1
[ 2.559696] Intel pstate controlling: cpu 2
[ 2.559714] Intel pstate controlling: cpu 3
[ 2.559766] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.560470] TCP: cubic registered
[ 2.560581] NET: Registered protocol family 10
[ 2.560947] mip6: Mobile IPv6
[ 2.560954] NET: Registered protocol family 17
[ 2.560963] mpls_gso: MPLS GSO support
[ 2.561282] Using IPI No-Shortcut mode
[ 2.561616] registered taskstats version 1
[ 2.562471] rtc_cmos 00:01: setting system clock to 2015-03-28 17:29:36 UTC (1427563776)
[ 2.562612] PM: Hibernation image not present or could not be loaded.
[ 2.562897] Freeing unused kernel memory: 656K (c166b000 - c170f000)
[ 2.562985] Write protecting the kernel text: 4596k
[ 2.563069] Write protecting the kernel read-only data: 1452k
[ 2.563070] NX-protecting the kernel data: 3596k
[ 2.573427] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.576630] systemd-udevd[70]: starting version 215
[ 2.577204] random: systemd-udevd urandom read with 0 bits of entropy available
[ 2.592506] ACPI: bus type USB registered
[ 2.592541] usbcore: registered new interface driver usbfs
[ 2.592558] usbcore: registered new interface driver hub
[ 2.592773] usbcore: registered new device driver usb
[ 2.593402] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.593708] ehci-pci: EHCI PCI platform driver
[ 2.594090] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 2.594121] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.594159] ehci-pci 0000:00:1a.0: debug port 2
[ 2.598158] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 2.598198] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd3619000
[ 2.600243] SCSI subsystem initialized
[ 2.600585] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.600587] ACPI: Thermal Zone [TZ00] (60 C)
[ 2.603295] libata version 3.00 loaded.
[ 2.605023] alx 0000:03:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [20:89:84:dd:f6:b7]
[ 2.609892] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.609947] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.609950] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.609953] usb usb1: Product: EHCI Host Controller
[ 2.609955] usb usb1: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[ 2.609957] usb usb1: SerialNumber: 0000:00:1a.0
[ 2.610245] hub 1-0:1.0: USB hub found
[ 2.610255] hub 1-0:1.0: 2 ports detected
[ 2.610609] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.610617] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.610632] ehci-pci 0000:00:1d.0: debug port 2
[ 2.614529] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.614596] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd3618000
[ 2.625793] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.625837] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.625839] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.625841] usb usb2: Product: EHCI Host Controller
[ 2.625843] usb usb2: Manufacturer: Linux 3.16.0-4-686-pae ehci_hcd
[ 2.625844] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.625978] hub 2-0:1.0: USB hub found
[ 2.625986] hub 2-0:1.0: 2 ports detected
[ 2.626230] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.626238] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 2.626339] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.626360] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[ 2.626417] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.626419] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.626420] usb usb3: Product: xHCI Host Controller
[ 2.626422] usb usb3: Manufacturer: Linux 3.16.0-4-686-pae xhci_hcd
[ 2.626423] usb usb3: SerialNumber: 0000:00:14.0
[ 2.626560] hub 3-0:1.0: USB hub found
[ 2.626569] hub 3-0:1.0: 4 ports detected
[ 2.626894] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.626897] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 2.626928] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.626930] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.626931] usb usb4: Product: xHCI Host Controller
[ 2.626933] usb usb4: Manufacturer: Linux 3.16.0-4-686-pae xhci_hcd
[ 2.626934] usb usb4: SerialNumber: 0000:00:14.0
[ 2.627042] hub 4-0:1.0: USB hub found
[ 2.627051] hub 4-0:1.0: 4 ports detected
[ 2.627353] ahci 0000:00:1f.2: version 3.0
[ 2.627500] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 2.627524] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.641812] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 2.641816] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
[ 2.650388] scsi0 : ahci
[ 2.650524] scsi1 : ahci
[ 2.650630] scsi2 : ahci
[ 2.650727] scsi3 : ahci
[ 2.650829] scsi4 : ahci
[ 2.650925] scsi5 : ahci
[ 2.650970] ata1: SATA max UDMA/133 abar m2048@0xd3617000 port 0xd3617100 irq 43
[ 2.650971] ata2: DUMMY
[ 2.650974] ata3: SATA max UDMA/133 abar m2048@0xd3617000 port 0xd3617200 irq 43
[ 2.650975] ata4: DUMMY
[ 2.650976] ata5: DUMMY
[ 2.650977] ata6: DUMMY
[ 2.922154] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.970161] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.978450] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR10001, max UDMA/100
[ 2.978461] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.985100] ata1.00: configured for UDMA/100
[ 2.985414] scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0001 PQ: 0 ANSI: 5
[ 3.054572] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 3.054578] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.055036] hub 1-1:1.0: USB hub found
[ 3.055186] hub 1-1:1.0: 6 ports detected
[ 3.166419] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 3.182341] tsc: Refined TSC clocksource calibration: 2394.560 MHz
[ 3.298787] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 3.298794] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.299253] hub 2-1:1.0: USB hub found
[ 3.299390] hub 2-1:1.0: 6 ports detected
[ 3.306417] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.310928] ata3.00: ATAPI: PLDS DVD-RW DS8A9SH, EL3A, max UDMA/100
[ 3.311922] ata3.00: configured for UDMA/100
[ 3.324947] scsi 2:0:0:0: CD-ROM PLDS DVD-RW DS8A9SH EL3A PQ: 0 ANSI: 5
[ 3.347324] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.347329] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.347388] sd 0:0:0:0: [sda] Write Protect is off
[ 3.347392] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.347411] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.363894] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.363902] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 3.364250] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 3.365305] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.365453] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 3.440861] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 3.442067] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.466583] usb 3-4: new high-speed USB device number 2 using xhci_hcd
[ 3.596841] usb 3-4: New USB device found, idVendor=048d, idProduct=9135
[ 3.596848] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.667047] usb 2-1.6: new high-speed USB device number 3 using ehci-pci
[ 3.768347] usb 2-1.6: New USB device found, idVendor=5986, idProduct=0295
[ 3.768354] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.768358] usb 2-1.6: Product: Lenovo EasyCamera
[ 3.768361] usb 2-1.6: Manufacturer: Vimicro corp.
[ 4.062293] PM: Starting manual resume from disk
[ 4.062301] PM: Hibernation image partition 8:6 present
[ 4.062303] PM: Looking for hibernation image.
[ 4.083899] PM: Image not found (code -22)
[ 4.083904] PM: Hibernation image not present or could not be loaded.
[ 4.122002] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.183232] Switched to clocksource tsc
[ 4.856420] random: nonblocking pool is initialized
[ 5.992214] systemd-udevd[326]: starting version 215
[ 7.608900] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input2
[ 7.608909] ACPI: Power Button [PWRB]
[ 7.608998] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input3
[ 7.609002] ACPI: Sleep Button [SLPB]
[ 7.609100] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[ 7.609144] ACPI: Lid Switch [LID0]
[ 7.609223] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 7.609227] ACPI: Power Button [PWRF]
[ 7.615590] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.631043] ACPI Warning: SystemIO range 0x00000428-0x0000042f conflicts with OpRegion 0x00000400-0x0000047f (\PMIO) (20140424/utaddress-258)
[ 7.631055] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.631062] ACPI Warning: SystemIO range 0x00000540-0x0000054f conflicts with OpRegion 0x00000500-0x00000563 (\GPIO) (20140424/utaddress-258)
[ 7.631070] ACPI Warning: SystemIO range 0x00000540-0x0000054f conflicts with OpRegion 0x00000500-0x0000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-258)
[ 7.631077] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.631080] ACPI Warning: SystemIO range 0x00000530-0x0000053f conflicts with OpRegion 0x00000500-0x00000563 (\GPIO) (20140424/utaddress-258)
[ 7.631087] ACPI Warning: SystemIO range 0x00000530-0x0000053f conflicts with OpRegion 0x00000500-0x0000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-258)
[ 7.631094] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.631097] ACPI Warning: SystemIO range 0x00000500-0x0000052f conflicts with OpRegion 0x00000500-0x00000563 (\GPIO) (20140424/utaddress-258)
[ 7.631103] ACPI Warning: SystemIO range 0x00000500-0x0000052f conflicts with OpRegion 0x00000500-0x0000055f (\_SB_.PCI0.PEG0.PEGP.GPIO) (20140424/utaddress-258)
[ 7.631110] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.631113] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 7.646931] mei_me 0000:00:16.0: irq 44 for MSI/MSI-X
[ 7.804428] ACPI Warning: SystemIO range 0x00004040-0x0000405f conflicts with OpRegion 0x00004040-0x0000404f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[ 7.804437] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.827109] [drm] Initialized drm 1.1.0 20060810
[ 7.914384] ACPI: Battery Slot [BAT1] (battery present)
[ 7.914547] ACPI: AC Adapter [ACAD] (on-line)
[ 8.172516] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 8.189518] [drm] Memory usable by graphics device = 2048M
[ 8.189523] [drm] Replacing VGA console driver
[ 8.189988] Console: switching to colour dummy device 80x25
[ 8.250639] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 8.250656] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.250658] [drm] Driver supports precise vblank timestamp query.
[ 8.250792] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 8.292274] fbcon: inteldrmfb (fb0) is primary device
[ 8.337252] cfg80211: Calling CRDA to update world regulatory domain
[ 8.494693] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input8
[ 8.591093] iTCO_vendor_support: vendor-support=0
[ 8.613515] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 8.613546] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 8.613655] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.651917] ath: phy0: Set BT/WLAN RX diversity capability
[ 8.658158] [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder A
[ 8.658159] [drm:cpt_serr_int_handler] *ERROR* PCH transcoder A FIFO underrun
[ 8.660106] ath: phy0: ASPM enabled: 0x42
[ 8.660108] ath: EEPROM regdomain: 0x65
[ 8.660109] ath: EEPROM indicates we should expect a direct regpair map
[ 8.660111] ath: Country alpha2 being used: 00
[ 8.660111] ath: Regpair used: 0x65
[ 8.663253] alg: No test for crc32 (crc32-pclmul)
[ 8.902013] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 8.902361] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xf8e00000, irq=17
[ 9.039797] Console: switching to colour frame buffer device 170x48
[ 9.045050] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 9.045053] i915 0000:00:02.0: registered panic notifier
[ 9.075542] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 9.075787] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 9.075908] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:35/LNXVIDEO:00/input/input9
[ 9.076847] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 9.076979] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:03/input/input10
[ 9.077085] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 9.081361] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 9.175480] sound hdaudioC0D0: CX20590: BIOS auto-probing.
[ 9.175931] sound hdaudioC0D0: autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[ 9.175935] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 9.175938] sound hdaudioC0D0: hp_outs=1 (0x19/0x0/0x0/0x0/0x0)
[ 9.175940] sound hdaudioC0D0: mono: mono_out=0x0
[ 9.175942] sound hdaudioC0D0: inputs:
[ 9.175945] sound hdaudioC0D0: Internal Mic=0x1b
[ 9.175948] sound hdaudioC0D0: Mic=0x1a
[ 9.176808] sound hdaudioC0D0: Enable sync_write for stable communication
[ 9.236259] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input11
[ 9.237166] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 9.237287] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 9.237423] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 9.348741] intel_rapl: RAPL domain dram detection failed
[ 9.422429] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1695, fw id: 739436
[ 9.485866] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 10.116615] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 10.664745] cfg80211: World regulatory domain updated:
[ 10.664752] cfg80211: DFS Master region: unset
[ 10.664755] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 10.664760] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.664764] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.664766] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.664770] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 10.664773] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 10.664776] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 10.664779] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 10.664782] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 11.708935] media: Linux media interface: v0.10
[ 11.722053] Linux video capture interface: v2.00
[ 12.988868] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0295)
[ 12.990492] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input15
[ 12.990648] usbcore: registered new interface driver uvcvideo
[ 12.990651] USB Video Class driver (1.1.1)
[ 14.345897] usb 3-4: dvb_usb_af9035: prechip_version=83 chip_version=01 chip_type=9135
[ 14.346277] usb 3-4: dvb_usb_v2: found a 'ITE 9135 Generic' in warm state
[ 14.347193] usb 3-4: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 14.347231] DVB: registering new adapter (ITE 9135 Generic)
[ 14.390939] i2c i2c-7: af9033: firmware version: LINK=255.255.255.255 OFDM=2.47.14.0
[ 14.390956] usb 3-4: DVB: registering adapter 0 frontend 0 (Afatech AF9033 (DVB-T))...
[ 14.418022] i2c i2c-7: tuner_it913x: ITE Tech IT913X successfully attached
[ 14.455840] Registered IR keymap rc-it913x-v1
[ 14.456052] input: ITE 9135 Generic as /devices/pci0000:00/0000:00:14.0/usb3/3-4/rc/rc0/input16
[ 14.456178] rc0: ITE 9135 Generic as /devices/pci0000:00/0000:00:14.0/usb3/3-4/rc/rc0
[ 14.456187] usb 3-4: dvb_usb_v2: schedule remote query interval to 500 msecs
[ 14.456194] usb 3-4: dvb_usb_v2: 'ITE 9135 Generic' successfully initialized and connected
[ 14.456247] usbcore: registered new interface driver dvb_usb_af9035
[ 15.333658] Adding 3934204k swap on /dev/sda6. Priority:-1 extents:1 across:3934204k FS
[ 15.385570] EXT4-fs (sda5): re-mounted. Opts: (null)
[ 15.544956] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 16.197445] lp: driver loaded but no devices found
[ 16.207230] ppdev: user-space parallel port driver
[ 16.252605] fuse init (API version 7.23)
[ 18.382794] RPC: Registered named UNIX socket transport module.
[ 18.382799] RPC: Registered udp transport module.
[ 18.382800] RPC: Registered tcp transport module.
[ 18.382802] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 18.418854] FS-Cache: Loaded
[ 18.449018] FS-Cache: Netfs 'nfs' registered for caching
[ 18.515575] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 19.937696] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input17
[ 20.729456] vboxdrv: Found 4 processor cores.
[ 20.729996] vboxdrv: fAsync=0 offMin=0x210 offMax=0x21cc
[ 20.730126] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 20.730130] vboxdrv: Successfully loaded version 4.3.18_Debian (interface 0x001a0008).
[ 20.849406] vboxpci: IOMMU not found (not compiled)
[ 29.471233] Bluetooth: Core ver 2.19
[ 29.471255] NET: Registered protocol family 31
[ 29.471258] Bluetooth: HCI device and connection manager initialized
[ 29.471265] Bluetooth: HCI socket layer initialized
[ 29.471268] Bluetooth: L2CAP socket layer initialized
[ 29.471279] Bluetooth: SCO socket layer initialized
[ 29.900136] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 29.900144] Bluetooth: BNEP filters: protocol multicast
[ 29.900156] Bluetooth: BNEP socket layer initialized
[ 33.979056] alx 0000:03:00.0: irq 47 for MSI/MSI-X
[ 33.981014] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 34.000667] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 35.889828] wlan0: authenticate with dc:ce:bc:98:7a:f2
[ 35.897334] wlan0: send auth to dc:ce:bc:98:7a:f2 (try 1/3)
[ 35.900684] wlan0: authenticated
[ 35.902046] wlan0: associate with dc:ce:bc:98:7a:f2 (try 1/3)
[ 35.915414] wlan0: RX AssocResp from dc:ce:bc:98:7a:f2 (capab=0x8431 status=0 aid=3)
[ 35.915486] wlan0: associated
[ 35.915520] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 38.406313] systemd-logind[2932]: New seat seat0.
[ 38.418398] bbswitch: version 0.8
[ 38.418410] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 38.418420] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[ 38.418449] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 38.418581] bbswitch: detected an Optimus _DSM function
[ 38.418705] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 38.421827] bbswitch: disabling discrete graphics
[ 38.421841] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
[ 38.437999] systemd-logind[2932]: Watching system buttons on /dev/input/event4 (Power Button)
[ 38.438236] systemd-logind[2932]: Watching system buttons on /dev/input/event8 (Video Bus)
[ 38.438374] systemd-logind[2932]: Watching system buttons on /dev/input/event1 (Power Button)
[ 38.438509] systemd-logind[2932]: Watching system buttons on /dev/input/event2 (Sleep Button)
[ 38.438613] systemd-logind[2932]: Watching system buttons on /dev/input/event7 (Video Bus)
[ 38.438800] systemd-logind[2932]: Watching system buttons on /dev/input/event3 (Lid Switch)
[ 47.347385] systemd-logind[2932]: Failed to start user service: Unknown unit: user@1000.service
[ 47.350892] systemd-logind[2932]: New session 1 of user rmk.
[ 92.141777] Bluetooth: RFCOMM TTY layer initialized
[ 92.141787] Bluetooth: RFCOMM socket layer initialized
[ 92.141794] Bluetooth: RFCOMM ver 1.11
[ 1059.267964] usb 3-4: USB disconnect, device number 2
[ 1059.314900] usb 3-4: dvb_usb_v2: 'ITE 9135 Generic' successfully deinitialized and disconnected
[ 1071.774982] usb 3-4: new high-speed USB device number 3 using xhci_hcd
[ 1071.905180] usb 3-4: New USB device found, idVendor=048d, idProduct=9135
[ 1071.905188] usb 3-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1071.906771] usb 3-4: dvb_usb_af9035: prechip_version=83 chip_version=01 chip_type=9135
[ 1071.907150] usb 3-4: dvb_usb_v2: found a 'ITE 9135 Generic' in cold state
[ 1071.907236] usb 3-4: firmware: failed to load dvb-usb-it9135-01.fw (-2)
[ 1071.907242] usb 3-4: Direct firmware load failed with error -2
[ 1071.907245] usb 3-4: Falling back to user helper
[ 1071.908759] usb 3-4: dvb_usb_v2: Did not find the firmware file 'dvb-usb-it9135-01.fw'. Please see linux/Documentation/dvb/ for more details on firmware-problems. Status -12
[ 1071.908777] dvb_usb_af9035: probe of 3-4:1.0 failed with error -12Kod:
ls /lib/firmware/
Kod:
3com advansys agere_ap_fw.bin agere_sta_fw.bin amd-ucode ar3k ar5523.bin ar7010_1_1.fw ar7010.fw ar9170.fw ar9271.fw ath3k-1.fw ath6k atmel_at76c502_3com.bin atmel_at76c502_3com-wpa.bin atmel_at76c502.bin atmel_at76c502d.bin atmel_at76c502d-wpa.bin atmel_at76c502e.bin atmel_at76c502e-wpa.bin atmel_at76c502-wpa.bin atmel_at76c503-i3861.bin atmel_at76c503-i3863.bin atmel_at76c503-rfmd-0.90.2-140.bin atmel_at76c503-rfmd-acc.bin atmel_at76c503-rfmd.bin atmel_at76c504_2958-wpa.bin atmel_at76c504a_2958-wpa.bin atmel_at76c504.bin atmel_at76c504c-wpa.bin atmel_at76c505a-rfmd2958.bin atmel_at76c505-rfmd2958.bin atmel_at76c505-rfmd.bin atmel_at76c506.bin atmel_at76c506-wpa.bin av7110 b43 b43legacy BCM2033-FW.bin BCM2033-MD.hex bcm70012fw.bin bcm70015fw.bin bcmFilePlayFw.bin bnx2 bnx2x bnx2x-e1-5.0.21.0.fw bnx2x-e1h-5.0.21.0.fw brcm carl9170-1.fw cis cxgb3 cxgb4 dabusb dsp56k dvb-fe-xc5000-1.6.114.fw dvb-usb-dib0700-1.20.fw e100 ene-ub6250 hp htc_7010.fw htc_9271.fw i2400m-fw-usb-1.4.sbcf i2400m-fw-usb-1.5.sbcf i6050-fw-usb-1.5.sbcf intel intel-ucode ipw2100-1.3.fw ipw2100-1.3-i.fw ipw2100-1.3-p.fw ipw2200-bss.fw ipw2200-ibss.fw ipw2200-sniffer.fw ipw2x00.LICENSE isci iwlwifi-1000-5.ucode iwlwifi-100-5.ucode iwlwifi-105-6.ucode iwlwifi-135-6.ucode iwlwifi-2000-6.ucode iwlwifi-2030-6.ucode iwlwifi-3160-7.ucode iwlwifi-3160-8.ucode iwlwifi-3160-9.ucode iwlwifi-3945-2.ucode iwlwifi-4965-2.ucode iwlwifi-5000-2.ucode iwlwifi-5000-5.ucode iwlwifi-5150-2.ucode iwlwifi-6000-4.ucode iwlwifi-6000g2a-5.ucode iwlwifi-6000g2a-6.ucode iwlwifi-6000g2b-6.ucode iwlwifi-6050-4.ucode iwlwifi-6050-5.ucode iwlwifi-7260-7.ucode iwlwifi-7260-8.ucode iwlwifi-7260-9.ucode iwlwifi-7265-8.ucode iwlwifi-7265-9.ucode kaweth keyspan_pda lbtf_usb.bin libertas libertas_cs.fw libertas_cs_helper.fw matrox mrvl mts_cdma.fw mts_edge.fw mts_gsm.fw mwl8k myri10ge_ethp_z8e.dat myri10ge_eth_z8e.dat myri10ge_rss_ethp_z8e.dat myri10ge_rss_eth_z8e.dat phanfw.bin prism2_ru.fw prism2_ru.hex ql2100_fw.bin ql2200_fw.bin ql2300_fw.bin ql2322_fw.bin ql2400_fw.bin ql2500_fw.bin qlogic r128 radeon rt2561.bin rt2561s.bin rt2661.bin rt2860.bin rt2870.bin rt3070.bin rt3071.bin rt3090.bin rt3290.bin rt73.bin RTL8192E RTL8192SU rtl_nic rtlwifi ru010803.fw ru010803.hex s5p-mfc.fw s5p-mfc-v6.fw s5p-mfc-v6-v2.fw s5p-mfc-v7.fw s5p-mfc-v8.fw sd8385.bin sd8385_helper.bin sd8686.bin sd8686_helper.bin sd8688.bin sd8688_helper.bin STLC2500_R4_00_03.ptc STLC2500_R4_00_06.ssf STLC2500_R4_02_02_WLAN.ssf STLC2500_R4_02_04.ptc tehuti ti-connectivity tigon ueagle-atm usb8388.bin usbduxfast_firmware.bin usbdux_firmware.bin usbduxsigma_firmware.bin v4l-cx231xx-avcore-01.fw v4l-cx23418-apu.fw v4l-cx23418-cpu.fw v4l-cx23418-dig.fw v4l-cx2341x-dec.fw v4l-cx2341x-enc.fw v4l-cx2341x-init.mpg v4l-cx23885-avcore-01.fw v4l-cx25840.fw v4l-pvrusb2-24xxx-01.fw v4l-pvrusb2-29xxx-01.fw vntwusb.fw zd1211
zasugerować się tym? [url]http://www.debian.pl/entries/264-Instalacja-tunera-dvb-Not-Only-TV-DVB-T-QUBE[/url]
Ostatnio edytowany przez reemeek (2015-03-28 18:04:19)
Offline
#4 2015-03-28 18:05:19
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: Tuner USB-DVBT pod debianem
http://www.linuxtv.org/wiki/index.php/ITE_IT9135
https://forum.dug.net.pl/viewtopic.php?pid=245869
i masa podobnych wątków na forum.
zasugerować się tym? [url]http://www.debian.pl/entries/264-Instalacja-tunera-dvb-Not-Only-TV-DVB-T-QUBE[/url][/quote]
Nie.
Offline
#5 2015-03-28 19:09:56
reemeek - Użytkownik
- reemeek
- Użytkownik
- Zarejestrowany: 2013-07-04
Re: Tuner USB-DVBT pod debianem
Rozwiązany :)
Wystarczyło:
1. Pobrać plik i rozpakować po czy zostaje jeden plik o nazwie
dvb-usb-it9135.fw[/quote]
[url]http://www.ite.com.tw/uploads/firmware/v3.6.0.0/dvb-usb-it9135.zip[/url]
2. W miejscu gdzie zostały rozpakowany plik wyciąć 2 fragmenty z pliku poleceniem ddKod:
dd if=dvb-usb-it9135.fw ibs=1 skip=64 count=8128 of=dvb-usb-it9135-01.fw dd if=dvb-usb-it9135.fw ibs=1 skip=12866 count=5817 of=dvb-usb-it9135-02.fw3. Przenieść te 3 pliki do
Kod:
/lib/firmware4. W brzydki windows'owski sposób zrebootować system :-)
dla ceniących sobie vlc warto doinstalować w-scan do znalezienia programów i zapisać je do pliku poleceniemKod:
w_scan -ft -c PL -X >> channels.confnastępnie wczytać przez vlc
polecam do tego apke vlcremote na smartfona
Thx za wskazówki :)
Mam jeszcze dwa pytanka. Jest możliwość odbierania radia fm za pomocą tego tunera? i czy powstała wtyczka do obsługi pilota pod owy tuner?Ostatnio edytowany przez reemeek (2015-03-28 19:52:47)
Offline
#6 2015-03-28 23:17:06
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: Tuner USB-DVBT pod debianem
[quote=reemeek]Mam jeszcze dwa pytanka. Jest możliwość odbierania radia fm za pomocą tego tunera?[/quote]
Może jeszcze ma zaparzać kawę?
Co ma wspólnego tuner DVB-T z radiem FM?
Offline
#7 2015-03-29 00:18:29
Huk - Smoleńsk BULWA!
- Huk
- Smoleńsk BULWA!
- Zarejestrowany: 2006-11-08
Re: Tuner USB-DVBT pod debianem
@reemeek:
Radio można odbierać tylko jeżeli posiadasz tuner hybrydowy (czyli DVB-T + zwykły, analogowy) do tego on sam w sobie musi mieć obsługę radia co nie jest w cale takie pewne, na samym DVB-T nie ma szans niestety.
Offline
#8 2015-03-29 00:30:42
reemeek - Użytkownik
- reemeek
- Użytkownik
- Zarejestrowany: 2013-07-04
Re: Tuner USB-DVBT pod debianem
Dzieki za wyjaśnienie oszczedziles mi czas ☺ a kawy nie pije wiec nie trzeba 😉
Offline
#9 2015-03-29 09:48:38
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: Tuner USB-DVBT pod debianem
[quote=reemeek]dla ceniących sobie vlc warto doinstalować w-scan do znalezienia programów[/quote]
Polecam tvheadend jako server oblsługi tunera.
Jako klienta można używać vlc, mpv, kodi.
Osobiście używam mpv bo jest najszybszy.
tvheadend jest szczególnie pomocny przy nagrywaniu na czas.
[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]
Offline
#10 2015-03-29 11:11:59
reemeek - Użytkownik
- reemeek
- Użytkownik
- Zarejestrowany: 2013-07-04
Re: Tuner USB-DVBT pod debianem
Zaraz przetestuje 😎 thx
Offline
Informacje debugowania
| Time (s) | Query |
|---|---|
| 0.00010 | SET CHARSET latin2 |
| 0.00005 | SET NAMES latin2 |
| 0.00122 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.189.184.99' WHERE u.id=1 |
| 0.00107 | REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '18.189.184.99', 1732425835) |
| 0.00047 | SELECT * FROM punbb_online WHERE logged<1732425535 |
| 0.00064 | DELETE FROM punbb_online WHERE ident='18.116.52.43' |
| 0.00062 | DELETE FROM punbb_online WHERE ident='18.188.140.232' |
| 0.00054 | DELETE FROM punbb_online WHERE ident='18.191.93.18' |
| 0.00060 | DELETE FROM punbb_online WHERE ident='3.136.22.184' |
| 0.00071 | DELETE FROM punbb_online WHERE ident='3.142.212.153' |
| 0.00070 | DELETE FROM punbb_online WHERE ident='3.144.29.213' |
| 0.00070 | DELETE FROM punbb_online WHERE ident='3.145.85.74' |
| 0.00068 | SELECT topic_id FROM punbb_posts WHERE id=285197 |
| 0.00093 | SELECT id FROM punbb_posts WHERE topic_id=27224 ORDER BY posted |
| 0.00077 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=27224 AND t.moved_to IS NULL |
| 0.00005 | SELECT search_for, replace_with FROM punbb_censoring |
| 0.00186 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=27224 ORDER BY p.id LIMIT 0,25 |
| 0.00065 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=27224 |
| Total query time: 0.01236 s | |