Forum Debian Users Gang

wireboot · 2014-06-24 20:32:02

Witam.
Posiadam laptop PackardBell MH35 z kartą graficzna sis mirage 3. Zainstalowałem sobie wczoraj debianka wheezy. Zaktualizowałem go do Sid. Następnie zainstalowałem xorg oraz fluxbox. Grafika działa, ale tylko na maksymalnej rozdzielczosci 1024x768. Ta grafika dla tego ekranu laptopa na pewno obsługuje maksymalną rozdzielczość 1280x800 (wcześniej właśnie taka była na windowsie).

A więc, po kolei, tutaj dokładnie moja karta graficzna:

Kod:

root@pb:~# lspci | grep -i vga
01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter (rev 10)

Na internecie było kilka poradników, mianowicie jeden z nich który zrobiłem ( w poradniku trzeba było skopiować 2 pliki do /usr/lib/xorg/modules/drivers/ a następnie skopiować plik xorg.conf (oczywiście do /etc/X11/xorg.conf ). Niestety po uruchomieniu powłoki graficznej poleceniem startx system wysypuje się (tutaj plik loga /var/log/Xorg.0.log ):

Kod:

root@pb:~# cat /var/log/Xorg.0.log
[   696.772]
X.Org X Server 1.15.1
Release Date: 2014-04-13
[   696.772] X Protocol Version 11, Revision 0
[   696.772] Build Operating System: Linux 3.13-1-amd64 x86_64 Debian
[   696.772] Current Operating System: Linux pb 3.14-1-amd64 #1 SMP Debian 3.14.7-1 (2014-06-16) x86_64
[   696.772] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14-1-amd64 root=UUID=4d7681d5-7d97-4526-9a7f-64d27a22930a ro quiet
[   696.772] Build Date: 15 April 2014  06:58:36PM
[   696.772] xorg-server 2:1.15.1-1 (http://www.debian.org/support)
[   696.773] Current version of pixman: 0.32.4
[   696.773]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[   696.773] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   696.774] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 24 20:25:07 2014
[   696.775] (==) Using config file: "/etc/X11/xorg.conf"
[   696.775] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   696.778] (==) No Layout section.  Using the first Screen section.
[   696.778] (**) |-->Screen "Default Screen" (0)
[   696.778] (**) |   |-->Monitor "Configured Monitor"
[   696.780] (**) |   |-->Device "Configured Video Device"
[   696.780] (==) Automatically adding devices
[   696.780] (==) Automatically enabling devices
[   696.780] (==) Automatically adding GPU devices
[   696.782] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   696.782]    Entry deleted from font path.
[   696.788] (==) FontPath set to:
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/100dpi/:unscaled,
        /usr/share/fonts/X11/75dpi/:unscaled,
        /usr/share/fonts/X11/Type1,
        /usr/share/fonts/X11/100dpi,
        /usr/share/fonts/X11/75dpi,
        built-ins
[   696.788] (==) ModulePath set to "/usr/lib/xorg/modules"
[   696.788] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[   696.788] (II) Loader magic: 0x7fe9a7c3fd40
[   696.788] (II) Module ABI versions:
[   696.788]    X.Org ANSI C Emulation: 0.4
[   696.788]    X.Org Video Driver: 15.0
[   696.788]    X.Org XInput driver : 20.0
[   696.788]    X.Org Server Extension : 8.0
[   696.789] (--) PCI:*(0:1:0:0) 1039:6351:1631:c20c rev 16, Mem @ 0xc0000000/268435456, 0xd4000000/131072, I/O @ 0x00009000/128
[   696.790] Initializing built-in extension Generic Event Extension
[   696.790] Initializing built-in extension SHAPE
[   696.790] Initializing built-in extension MIT-SHM
[   696.790] Initializing built-in extension XInputExtension
[   696.790] Initializing built-in extension XTEST
[   696.790] Initializing built-in extension BIG-REQUESTS
[   696.790] Initializing built-in extension SYNC
[   696.790] Initializing built-in extension XKEYBOARD
[   696.790] Initializing built-in extension XC-MISC
[   696.790] Initializing built-in extension SECURITY
[   696.791] Initializing built-in extension XINERAMA
[   696.791] Initializing built-in extension XFIXES
[   696.791] Initializing built-in extension RENDER
[   696.791] Initializing built-in extension RANDR
[   696.791] Initializing built-in extension COMPOSITE
[   696.791] Initializing built-in extension DAMAGE
[   696.791] Initializing built-in extension MIT-SCREEN-SAVER
[   696.791] Initializing built-in extension DOUBLE-BUFFER
[   696.791] Initializing built-in extension RECORD
[   696.791] Initializing built-in extension DPMS
[   696.791] Initializing built-in extension Present
[   696.792] Initializing built-in extension DRI3
[   696.792] Initializing built-in extension X-Resource
[   696.792] Initializing built-in extension XVideo
[   696.792] Initializing built-in extension XVideo-MotionCompensation
[   696.792] Initializing built-in extension SELinux
[   696.792] Initializing built-in extension XFree86-VidModeExtension
[   696.792] Initializing built-in extension XFree86-DGA
[   696.792] Initializing built-in extension XFree86-DRI
[   696.792] Initializing built-in extension DRI2
[   696.792] (II) LoadModule: "glx"
[   696.799] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   696.803] (II) Module glx: vendor="X.Org Foundation"
[   696.803]    compiled for 1.15.1, module version = 1.0.0
[   696.803]    ABI class: X.Org Server Extension, version 8.0
[   696.803] (==) AIGLX enabled
[   696.804] Loading extension GLX
[   696.804] (II) LoadModule: "sis671"
[   696.804] (II) Loading /usr/lib/xorg/modules/drivers/sis671_drv.so
[   696.811] (II) Module sis671: vendor="X.Org Foundation"
[   696.811]    compiled for 1.11.3, module version = 0.8.0
[   696.811]    Module class: X.Org Video Driver
[   696.811]    ABI class: X.Org Video Driver, version 11.0
[   696.811] (EE) module ABI major version (11) doesn't match the server's version (15)
[   696.811] (II) UnloadModule: "sis671"
[   696.811] (II) Unloading sis671
[   696.811] (EE) Failed to load module "sis671" (module requirement mismatch, 0)
[   696.811] (EE) No drivers available.
[   696.812] (EE)
Fatal server error:
[   696.812] (EE) no screens found(EE)
[   696.812] (EE)
Please consult the The X.Org Foundation support
         at http://wiki.x.org
 for help.
[   696.812] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   696.813] (EE)

Niestety nie wiem jak wyjść z tej sytuacji, nie chcę korzystać z laptopa z rozdzielczości 1024x768 (tymbardziej, że jest możliwa 1280x800). Czy ma ktoś jakieś pomysły? Mógłby mi ktoś pomóc? :)
Z góry dziękuję!

mati75 · 2014-06-24 20:39:15

http://cgit.freedesktop.org/xorg/driver/xf86-video-sis/ spróbuj to skompilować.

mati75 · 2014-06-26 11:17:26

Opisze rozwiązanie problemu. 2 godziny nam to zajęło i o to rezultat. Niech sobie google pozycjonuje.

[b]Instalacja Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter na Debianie unstable data 26.06[/b]

Masz inną wersję Debiana - napisz do mnie na PW skompiluje Ci pakiet.

Pobierasz pakiet dla swojej architektury systemowej:

Kod:

wget http://repozytorium.mati75.eu/debian/pool/main/x/xserver-xorg-video-sisimedia/xserver-xorg-video-sisimedia_0.9.1-1_`dpkg-architecture -qDEB_HOST_ARCH`.deb

Zainstalować:

Kod:

dpkg -i xserver-xorg-video-sisimedia_0.9.1-1_`dpkg-architecture -qDEB_HOST_ARCH`.deb

W /etc/X11/xorg.conf umieść:

Kod:

Section "Device"
 Identifier    "Configured Video Device"
 Driver     "sisimedia"
EndSection

Section "Monitor"
 Identifier    "Configured Monitor"
EndSection

Section "Screen"
 Identifier    "Default Screen"
 Monitor     "Configured Monitor"
 Device     "Configured Video Device"
 DefaultDepth 24
EndSection

wireboot · 2014-06-26 21:01:47

Serdecznie dziękuję koledze mati75 za pomoc.
Sposób opisany wyżej działa!

brekston · 2014-07-18 10:48:42

Potwierdzam, opisany sposób działa
Sprawdzałem na Linux Mint 17

mati75 · 2015-07-05 12:21:22

Dostałem informację, że linki nie działają. Rok minął, więc się trochę zmieniło.

Pakiety dla [b]Ubuntu i dystrybucji bazujących[/b]: https://launchpad.net/~mati75/+archive/ubuntu/sis771

Pakiety dla [b]Debiana[/b]:

dla wheezy:

Kod:

wget http://repozytorium.mati75.eu/debian-old/pool/main/x/xserver-xorg-video-sisimedia/xserver-xorg-video-sisimedia_0.9.1-1~bpo70+1_`dpkg-architecture -qDEB_HOST_ARCH`.deb

dla jessie:

Kod:

wget http://repozytorium.mati75.eu/debian/pool/main/x/xserver-xorg-video-sisimedia/xserver-xorg-video-sisimedia_0.9.1-2~bpo8+1_`dpkg-architecture -qDEB_HOST_ARCH`.deb

dla stretch/sid:

Kod:

wget http://repozytorium.mati75.eu/debian/pool/main/x/xserver-xorg-video-sisimedia/xserver-xorg-video-sisimedia_0.9.1-3_`dpkg-architecture -qDEB_HOST_ARCH`.deb

Konfiguracja powyżej.

Ostatnio edytowany przez mati75 (2015-07-05 12:24:17)

artur · 2015-10-15 21:35:30

Witam serdecznie,
bardzo ucieszyłem się jak przeczytałem Twój tutorial, ale niestety u mnie to nie zadziałało.
instaluję sterownik na komputerze ASUS K50C-SX002 gdzie również jest zintegrowana grafika SIS Mirage 3+
wszystko zgodnie z instrukcją, niestety efektem jest czarny ekran z mrugającym kursorem na tty7 gdy wprowadzę konfigurację zgodnie z Twoją instrukcją.
Gdy konfiguracji nie ma to oczywiście komputer działa, ale nie ma pełnej rozdzielczości.

System to Debian 8 ale instalowany z netinst dzisiaj więc może to już nowsza wersja?

Kod:

anna@anna:~$ uname -a
Linux anna 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u5 (2015-10-09) x86_64 GNU/Linux

P.S.
Próba ręcznego skompilowania paczki źródłowej kończy się brakiem pliku xf86Resources.h i niestety nie za bardzo wiem skąd go zainstalować, znalazłem tylko informację że on jest przestarzały, więc pewnie dlatego nie mam go w systemie i nie mogę odszukać w pakietach https://www.google.pl/search?q=deprecated%20xf86Resources.h
Czy możecie coś poradzić?

mati75 · 2015-10-16 11:19:08

Trzeba pobrać pakiet:

Kod:

wget http://repozytorium.mati75.eu/debian/pool/main/x/xserver-xorg-video-sisimedia/xserver-xorg-video-sisimedia_0.9.1-2~bpo8+1_`dpkg-architecture -qDEB_HOST_ARCH`.deb

i umieścić konfigurację w /etc/X11/xorg.conf:

Kod:

Section "Device"
 Identifier    "Configured Video Device"
 Driver     "sisimedia"
EndSection

Section "Monitor"
 Identifier    "Configured Monitor"
EndSection

Section "Screen"
 Identifier    "Default Screen"
 Monitor     "Configured Monitor"
 Device     "Configured Video Device"
 DefaultDepth 24
EndSection

artur · 2015-10-16 12:40:37

I właśnie tu jest problem, bo robię dokładnie tak.
Po pobraniu pakietu "sudo dpkg -i pakiet.deb".
Wklejam konfigurację do /etc/X11/xorg.conf.

I wynik jest taki, że system startuje, potem pojawia się czarny ekran, kilka kwadratowych artefaktów na dole, a potem już tylko biały kursor w lewym górnym rogu.

Z logów wynika że serwer nie użył rozdzielczości 1366x768, a taka jest rozdzielczość tego laptopa, ani żadnej innej.

Wklejam zawartość pliku /var/log/Xorg.0.log.
Jak sprawdzić o co chodzi?

Kod:

[    28.857] 
X.Org X Server 1.16.4
Release Date: 2014-12-20
[    28.859] X Protocol Version 11, Revision 0
[    28.860] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[    28.860] Current Operating System: Linux anna 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u5 (2015-10-09) x86_64
[    28.860] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=d5637685-9e2e-4ae6-bfff-0926ba43f1fe ro quiet
[    28.860] Build Date: 11 February 2015  12:32:02AM
[    28.860] xorg-server 2:1.16.4-1 (http://www.debian.org/support) 
[    28.860] Current version of pixman: 0.32.6
[    28.860]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    28.860] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    28.861] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 16 12:16:00 2015
[    28.861] (==) Using config file: "/etc/X11/xorg.conf"
[    28.861] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    28.861] (==) No Layout section.  Using the first Screen section.
[    28.861] (**) |-->Screen "Default Screen" (0)
[    28.861] (**) |   |-->Monitor "Configured Monitor"
[    28.862] (**) |   |-->Device "Configured Video Device"
[    28.862] (==) Automatically adding devices
[    28.862] (==) Automatically enabling devices
[    28.862] (==) Automatically adding GPU devices
[    28.862] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    28.862]     Entry deleted from font path.
[    28.862] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[    28.862] (==) ModulePath set to "/usr/lib/xorg/modules"
[    28.862] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    28.862] (II) Loader magic: 0x7ffa4d0c0d80
[    28.862] (II) Module ABI versions:
[    28.862]     X.Org ANSI C Emulation: 0.4
[    28.862]     X.Org Video Driver: 18.0
[    28.862]     X.Org XInput driver : 21.0
[    28.862]     X.Org Server Extension : 8.0
[    28.870] (--) PCI:*(0:1:0:0) 1039:6351:1043:19e2 rev 16, Mem @ 0xd0000000/268435456, 0xfe9e0000/131072, I/O @ 0x0000dc00/128
[    28.870] (II) LoadModule: "glx"
[    28.870] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    28.878] (II) Module glx: vendor="X.Org Foundation"
[    28.878]     compiled for 1.16.4, module version = 1.0.0
[    28.878]     ABI class: X.Org Server Extension, version 8.0
[    28.878] (==) AIGLX enabled
[    28.878] (II) LoadModule: "sisimedia"
[    28.878] (II) Loading /usr/lib/xorg/modules/drivers/sisimedia_drv.so
[    28.879] (II) Module sisimedia: vendor="X.Org Foundation"
[    28.879]     compiled for 1.16.4, module version = 0.8.0
[    28.879]     Module class: X.Org Video Driver
[    28.879]     ABI class: X.Org Video Driver, version 18.0
[    28.879] (II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
    SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
    SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre),
    SIS[M]661[F|M]X/[M]741[GX]/[M]760[GX]/[M]761[GX]/662, SIS340,
    [M]670/[M]770[GX], [M]671/[M]771[GX]
[    28.879] (II) SIS: driver for XGI chipsets: Volari Z7 (XG20),
    Volari V3XT/V5/V8/Duo (XG40/XG42)
[    28.879] (++) using VT number 7

[    28.882] (II) SIS_pci_probe - begin, entity_num=0
[    28.882] (II)                        vendor_id=0x1039
[    28.882] (II)                        device_id=0x6351
[    28.882] (II)                        bus=1
[    28.882] (II)                        dev=0
[    28.882] (II)                        func=0
[    28.882] (II) SIS_pci_probe - ConfigPciEntity found
[    28.882] (II) SIS(0): SIS_pci_probe - GetEntityInfo chipset is 0x6351
[    28.882] (II) SIS(0): SIS_pci_probe - end
[    28.882] (II) SIS(0): SiS driver (2006/10/17-1, compiled for X.org 1.16.4.0)
[    28.882] (II) SIS(0): Copyright (C) 2001-2005 Thomas Winischhofer <thomas@winischhofer.net> and others
[    28.882] (II) SIS(0): *** See http://www.winischhofer.at/linuxsisvga.shtml
[    28.882] (II) SIS(0): *** for documentation, updates and a Premium Version.
[    28.883] (II) SIS(0): RandR rotation support not available in this version.
[    28.883] (II) SIS(0): Dynamic modelist support not available in this version.
[    28.883] (II) SIS(0): Screen growing support not available in this version.
[    28.883] (II) SIS(0): Advanced Xv video blitter not available in this version.
[    28.883] (II) SIS(0): Advanced MergedFB support not available in this version.
[    28.883] (--) SIS(0): sisfb not found
[    28.883] (--) SIS(0): Relocated I/O registers at 0xDC00
[    28.886] (II) Loading sub module "ramdac"
[    28.886] (II) LoadModule: "ramdac"
[    28.886] (II) Module "ramdac" already built-in
[    28.887] (II) SIS(0): Creating default Display subsection in Screen section
    "Default Screen" for depth/fbbpp 24/32
[    28.887] (**) SIS(0): Depth 24, (--) framebuffer bpp 32
[    28.887] (==) SIS(0): RGB weight 888
[    28.887] (==) SIS(0): Default visual is TrueColor
[    28.896] (WW) SIS(0): Could not find/read video BIOS
[    28.897] (==) SIS(0): Color HW cursor is enabled
[    28.897] (II) SIS(0): Using VRAM command queue, size 512k
[    28.897] (==) SIS(0): Hotkey display switching is enabled
[    28.897] (==) SIS(0): SiSCtrl utility interface is disabled
[    28.897] (II) SIS(0): For information on SiSCtrl, see
        http://www.winischhofer.at/linuxsispart1.shtml#sisctrl
[    28.897] (==) SIS(0): X server will not keep DPI constant for all screen sizes
[    28.897] (==) SIS(0): DRI enabled
[    28.897] (--) SIS(0): 131072K shared video RAM (UMA)
[    28.897] (--) SIS(0): DRAM type: DDR SDRAM
[    28.898] (--) SIS(0): Memory clock: 503.174 MHz
[    28.898] (--) SIS(0): DRAM bus width: 64 bit
[    28.898] (--) SIS(0): Linear framebuffer at 0xD0000000
[    28.898] (--) SIS(0): MMIO registers at 0xFE9E0000 (size 64K)
[    28.898] (--) SIS(0): VideoRAM: 131072 KB
[    28.898] (II) SIS(0): Using 20480K of framebuffer memory at offset 0K
[    28.898] (II) Loading sub module "ddc"
[    28.898] (II) LoadModule: "ddc"
[    28.898] (II) Module "ddc" already built-in
[    28.898] (--) SIS(0): Detected SiS307LV video bridge (Charter/UMC-1, ID 7; Rev 0xe1)
[    31.741] (--) SIS(0): No CRT1/VGA detected
[    31.742] (--) SIS(0): Detected LCD/Plasma panel (max. X 0 Y 0, pref. 0x0, RGB18)
[    31.743] (==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
[    31.743] (II) SIS(0): CRT1 gamma correction is enabled
[    31.744] (II) SIS(0): Separate Xv gamma correction for CRT1 is disabled
[    31.744] (II) SIS(0): CRT2 gamma correction is enabled
[    31.744] (--) SIS(0): Memory bandwidth at 32 bpp is 1006.35 MHz
[    31.744] (--) SIS(0): Detected LCD PanelDelayCompensation 0x00 (for LCD=CRT2)
[    31.744] (--) SIS(0): Detected LCD PanelDelayCompensation 0x00 (for LCD=CRT1)
[    31.745] (--) SIS(0): 302LV/302ELV: Using EMI 0x6a0d7039 (LCD)
[    31.745] (--) SIS(0): CRT2 DDC probing failed
[    31.745] (==) SIS(0): Min pixel clock is 10 MHz
[    31.745] (--) SIS(0): Max pixel clock is 340 MHz
[    31.745] (II) SIS(0): Replaced entire mode list with built-in modes
[    31.745] (II) SIS(0): Correcting missing CRT2 monitor HSync range
[    31.745] (II) SIS(0): Correcting missing CRT2 monitor VRefresh range
[    31.745] (II) SIS(0): "Unknown reason" in the following list means that the mode
[    31.745] (II) SIS(0): is not supported on the chipset/bridge/current output device.
[    31.745] (II) SIS(0): Configured Monitor: Using hsync range of 30.00-80.00 kHz
[    31.745] (II) SIS(0): Configured Monitor: Using vrefresh range of 59.00-61.00 Hz
[    31.745] (II) SIS(0): Configured Monitor: Using vrefresh value of 71.00 Hz
[    31.745] (WW) SIS(0): Unable to estimate virtual size
[    31.745] (II) SIS(0): Clock range:  10.00 to 340.00 MHz
[    31.745] (II) SIS(0): Not using default mode "800x600" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "800x600" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "800x600" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "800x600" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "800x600" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "800x600" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "800x600" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "800x600" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "640x480" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "640x480" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "640x480" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "640x480" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "640x480" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "640x480" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "640x480" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "640x480" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1024x768" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1024x768" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1024x768" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1024x768" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1024x768" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1024x768" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1024x768" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
[    31.746] (II) SIS(0): Not using default mode "2048x1536" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "2048x1536" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "2048x1536" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[    31.746] (II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[    31.746] (II) SIS(0): Not using default mode "1400x1050" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "1400x1050" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "1280x800" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "1280x800" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "1280x800" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "1440x900" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "1440x900" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "1440x900" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "1366x768" (unknown reason)
[    31.746] (WW) SIS(0): Mode pool is empty
[    31.746] (EE) SIS(0): **************************************************
[    31.746] (EE) SIS(0):                       ERROR:
[    31.746] (EE) SIS(0): No valid modes found - check VertRefresh/HorizSync
[    31.746] (EE) SIS(0):                   END OF MESSAGE
[    31.746] (EE) SIS(0): **************************************************
[    31.746] (II) UnloadModule: "sisimedia"
[    31.746] (EE) Screen(s) found, but none have a usable configuration.
[    31.746] (EE) 
Fatal server error:
[    31.746] (EE) no screens found(EE) 
[    31.746] (EE) 
Please consult the The X.Org Foundation support 
     at http://wiki.x.org
 for help. 
[    31.746] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    31.746] (EE) 
[    31.751] (EE) Server terminated with error (1). Closing log file.

Pavlo950 · 2015-10-16 12:52:31

Sprawdź inne rozdziałki w tym swoim konfigu. Może po prostu sterownik nie obrabia akurat tej, tylko może mniejszą.

artur · 2015-10-16 12:59:12

Właśnie w moim konfigu nie ma żadnych rozdzielczości, plik /etc/X11/xorg.conf w ogóle w moim systemie nie istniał, dopiero go utworzyłem wklejając instrukcję Mateusza.
Rozumiem że czegoś brakuje w mojej wiedzy.

Domyślny sterownik zainstalowany z systemem Debian widzi na tym komputerze tylko 1024x768 i 800x600. Tę paczkę zainstalowałem żeby zwiększyć rozdzielczość do 1366

Ostatnio edytowany przez artur (2015-10-16 12:59:56)

Pavlo950 · 2015-10-16 13:33:25

[quote=artur]

Kod:

[    31.745] (II) SIS(0): Configured Monitor: Using hsync range of 30.00-80.00 kHz
[    31.745] (II) SIS(0): Configured Monitor: Using vrefresh range of 59.00-61.00 Hz
[    31.745] (II) SIS(0): Configured Monitor: Using vrefresh value of 71.00 Hz
[    31.745] (WW) SIS(0): Unable to estimate virtual size
[    31.745] (II) SIS(0): Clock range:  10.00 to 340.00 MHz
[    31.745] (II) SIS(0): Not using default mode "800x600" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "800x600" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "800x600" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "800x600" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "800x600" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "800x600" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "800x600" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "800x600" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "640x480" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "640x480" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "640x480" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "640x480" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "640x480" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "640x480" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "640x480" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "640x480" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1024x768" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1024x768" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1024x768" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1024x768" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1024x768" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1024x768" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1024x768" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1280x1024" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[    31.745] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "1600x1200" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "1920x1440" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
[    31.746] (II) SIS(0): Not using default mode "2048x1536" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "2048x1536" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "2048x1536" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[    31.746] (II) SIS(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
[    31.746] (II) SIS(0): Not using default mode "1400x1050" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "1400x1050" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "1280x800" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "1280x800" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "1280x800" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "1440x900" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "1440x900" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "1440x900" (unknown reason)
[    31.746] (II) SIS(0): Not using default mode "1366x768" (unknown reason)

[/quote]
Sprawdź składnię w tym pliku, jaka powinna być i dobierz coś z powyższego (z odpowiednią częstotliwością). Jeżeli masz możliwość, to zrób to przez [u]ssh[/u] na koncie [u]root[/u]a (zalogować się nie wiem czy się zalogujesz, ale z Twojego [u]usera[/u] przez [u]su[/u] powinno ruszyć). No i restartować [u]X[/u]'y też się tak da (do czasu, aż zadziała).

Kod:

logan@toshiba:~$ man xorg.conf
logan@toshiba:~$ man xorg.conf.d

Ostatnio edytowany przez Pavlo950 (2015-10-16 13:36:45)

artur · 2015-10-18 12:11:04

Panowie, niestety chyba temu nie podołam.
Uruchamiałem juź serwer X dziesiątki razy.
I to nie tylko w Debianie.

Próbowałem nawet rozwiązania z innego wątku: https://forum.dug.net.pl/viewtopic.php?id=23937
Nawet instalowałem inne dystrybucje. Ba, nawet napisałem do firmy SiS czy mają sterownik do tego sprzętu, ale w piątek wieczorem więc czekam na odpowiedź.

Ale do rzeczy, wracając do mojego poprzedniego loga. Nie doczytałem wcześniej ale nad wklejoną przeze mnie listą trybów jest tekst "Unknown reason" in the following list meants that the mode is not supported on the chipset/bridge/current output device.

Ale skoro mam właściwy serownik (bo po trybach mam napisane UnloadModule: "sisimedia") to jak ten mój tryb nie jest wspierany?
System próbuje wszystkie tryby, i żadnego nie przyjmuje?

Dopisałem oczywiście rozdzielczości ale to niczego nie zmienia, nawet przy wcześniej działających nic się nie uruchamia. Plik loga bez zmian:

Kod:

Section "Monitor"
 Identifier "Configured Monitor"
 HorizSync 30-107
 VertRefresh 50-185
EndSection

Section "Screen"
 Identifier "Default Screen"
 Monitor "Configured Monitor"
 Device "Configured Video Device"
 DefaultDepth 24
 SubSection "Display"
  Viewport 0 0
  Depth 24
  Modes "1024x768" "800x600"
 EndSubSection
EndSection

czy Wam ta konfiguracja działa na X.Org X Server 1.16.4?

Ostatnio edytowany przez artur (2015-10-18 12:13:13)

mati75 · 2015-10-18 18:16:35

Na xserverze 1.16 powinno działać, nowszy trzeba dodać dodatkowy patch.

Tchayka · 2015-11-04 11:15:25

Siemanko, Mati!

Wszystko działało jak złoto do momentu wydania nowej wersji Ubuntu. Po aktualizacji systemu, filmy wyświetlane we flashu i html5 cierpią na niemiłosierny screen tearing. Znajdzie się na to jakaś rada, czy konieczny będzie downgrade systemu? Pozdrawiam i z góry dzięki za odpowiedź.

mati75 · 2015-11-04 15:33:48

Downgrade xservera albo nałożenie na niego patcha.

Time (s)	Query
0.00011	SET CHARSET latin2
0.00004	SET NAMES latin2
0.00110	SELECT u., g., o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.224.65.198' WHERE u.id=1
0.00084	REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '18.224.65.198', 1732557186)
0.00046	SELECT * FROM punbb_online WHERE logged<1732556886
0.00082	DELETE FROM punbb_online WHERE ident='18.119.159.196'
0.00077	DELETE FROM punbb_online WHERE ident='18.188.113.189'
0.00069	DELETE FROM punbb_online WHERE ident='3.145.110.99'
0.00046	SELECT topic_id FROM punbb_posts WHERE id=291799
0.00007	SELECT id FROM punbb_posts WHERE topic_id=26040 ORDER BY posted
0.00051	SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=26040 AND t.moved_to IS NULL
0.00008	SELECT search_for, replace_with FROM punbb_censoring
0.00354	SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=26040 ORDER BY p.id LIMIT 0,25
0.00091	UPDATE punbb_topics SET num_views=num_views+1 WHERE id=26040
Total query time: 0.0104 s

Forum Debian Users Gang

Ogłoszenie

#1 2014-06-24 20:32:02

wireboot - Nowy użytkownik

Sterowniki do sis mirage 3 debian sid

Kod:

Kod:

#2 2014-06-24 20:39:15

mati75 - Psuj

Re: Sterowniki do sis mirage 3 debian sid

#3 2014-06-26 11:17:26

mati75 - Psuj

Re: Sterowniki do sis mirage 3 debian sid

Kod:

Kod:

Kod:

#4 2014-06-26 21:01:47

wireboot - Nowy użytkownik

Re: Sterowniki do sis mirage 3 debian sid

#5 2014-07-18 10:48:42

brekston - Nowy użytkownik

Re: Sterowniki do sis mirage 3 debian sid

#6 2015-07-05 12:21:22

mati75 - Psuj

Re: Sterowniki do sis mirage 3 debian sid

Kod:

Kod:

Kod:

#7 2015-10-15 21:35:30

artur - Nowy użytkownik

Re: Sterowniki do sis mirage 3 debian sid

Kod:

#8 2015-10-16 11:19:08

mati75 - Psuj

Re: Sterowniki do sis mirage 3 debian sid

Kod:

Kod:

#9 2015-10-16 12:40:37

artur - Nowy użytkownik

Re: Sterowniki do sis mirage 3 debian sid

Kod:

#10 2015-10-16 12:52:31

Pavlo950 - człowiek pasjonat :D

Re: Sterowniki do sis mirage 3 debian sid

#11 2015-10-16 12:59:12

artur - Nowy użytkownik

Re: Sterowniki do sis mirage 3 debian sid

#12 2015-10-16 13:33:25

Pavlo950 - człowiek pasjonat :D

Re: Sterowniki do sis mirage 3 debian sid

Kod:

Kod:

#13 2015-10-18 12:11:04

artur - Nowy użytkownik

Re: Sterowniki do sis mirage 3 debian sid

Kod:

#14 2015-10-18 18:16:35

mati75 - Psuj

Re: Sterowniki do sis mirage 3 debian sid

#15 2015-11-04 11:15:25

Tchayka - Nowy użytkownik

Re: Sterowniki do sis mirage 3 debian sid

#16 2015-11-04 15:33:48

mati75 - Psuj

Re: Sterowniki do sis mirage 3 debian sid

Stopka forum

Informacje debugowania