Forum Debian Users Gang

raven18 · 2015-12-18 09:40:49

Hej tam ;)
Zmieniłem płytę główną i pojawił się problem z rozpoznaniem częstotliwości procesora, tzn procesor działa ale ze znacznie obniżonymi zegarami, nie wiem gdzie leży błąd. Procesor jest podkręcony tzw hardwerowo - został zmieniony STRAP na zworce na płycie, Xeon X5460 3.16GHz@3.8 (FSB 333>400) - system widzi go jako 3.16, dopiero wskakuje na 3.8 gdy wyłączę EIST:

Kod:

$ lscpu
Architecture:          x86_64
CPU op-mode(s):        32-bit, 64-bit
Byte Order:            Little Endian
CPU(s):                4
On-line CPU(s) list:   0-3
Thread(s) per core:    1
Core(s) per socket:    4
Socket(s):             1
NUMA node(s):          1
Vendor ID:             GenuineIntel
CPU family:            6
Model:                 23
Model name:            Intel(R) Xeon(R) CPU           X5460  @ 3.16GHz
Stepping:              10
CPU MHz:               2003.000
CPU max MHz:           3166,0000
CPU min MHz:           2003,0000
BogoMIPS:              7600.11
Virtualization:        VT-x
L1d cache:             32K
L1i cache:             32K
L2 cache:              6144K
NUMA node0 CPU(s):     0-3
Flags:                 fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm dca sse4_1 xsave lahf_lm dtherm tpr_shadow vnmi flexpriority

Napiszę tak, wydaje mi się nie możliwe by kernel/system był w stanie obniżyć zegar, ale tak do końca nie jestem tego pewien

Kod:

$ cpufreq-info
cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009
Report errors and bugs to cpufreq@vger.kernel.org, please.
analyzing CPU 0:
  driver: acpi-cpufreq
  CPUs which run at the same hardware frequency: 0
  CPUs which need to have their frequency coordinated by software: 0
  maximum transition latency: 10.0 us.
  hardware limits: 2.00 GHz - 3.17 GHz
  available frequency steps: 3.17 GHz, 2.67 GHz, 2.34 GHz, 2.00 GHz
  available cpufreq governors: conservative, userspace, powersave, ondemand, performance
  current policy: frequency should be within 2.00 GHz and 3.17 GHz.
                  The governor "ondemand" may decide which speed to use
                  within this range.
  current CPU frequency is 2.00 GHz.
  cpufreq stats: 3.17 GHz:17,44%, 2.67 GHz:2,19%, 2.34 GHz:7,05%, 2.00 GHz:73,32%  (472)
analyzing CPU 1:
  driver: acpi-cpufreq
  CPUs which run at the same hardware frequency: 1
  CPUs which need to have their frequency coordinated by software: 1
  maximum transition latency: 10.0 us.
  hardware limits: 2.00 GHz - 3.17 GHz
  available frequency steps: 3.17 GHz, 2.67 GHz, 2.34 GHz, 2.00 GHz
  available cpufreq governors: conservative, userspace, powersave, ondemand, performance
  current policy: frequency should be within 2.00 GHz and 3.17 GHz.
                  The governor "ondemand" may decide which speed to use
                  within this range.
  current CPU frequency is 2.00 GHz.
  cpufreq stats: 3.17 GHz:16,13%, 2.67 GHz:4,45%, 2.34 GHz:4,92%, 2.00 GHz:74,50%  (589)
analyzing CPU 2:
  driver: acpi-cpufreq
  CPUs which run at the same hardware frequency: 2
  CPUs which need to have their frequency coordinated by software: 2
  maximum transition latency: 10.0 us.
  hardware limits: 2.00 GHz - 3.17 GHz
  available frequency steps: 3.17 GHz, 2.67 GHz, 2.34 GHz, 2.00 GHz
  available cpufreq governors: conservative, userspace, powersave, ondemand, performance
  current policy: frequency should be within 2.00 GHz and 3.17 GHz.
                  The governor "ondemand" may decide which speed to use
                  within this range.
  current CPU frequency is 2.00 GHz.
  cpufreq stats: 3.17 GHz:26,15%, 2.67 GHz:1,85%, 2.34 GHz:10,88%, 2.00 GHz:61,12%  (538)
analyzing CPU 3:
  driver: acpi-cpufreq
  CPUs which run at the same hardware frequency: 3
  CPUs which need to have their frequency coordinated by software: 3
  maximum transition latency: 10.0 us.
  hardware limits: 2.00 GHz - 3.17 GHz
  available frequency steps: 3.17 GHz, 2.67 GHz, 2.34 GHz, 2.00 GHz
  available cpufreq governors: conservative, userspace, powersave, ondemand, performance
  current policy: frequency should be within 2.00 GHz and 3.17 GHz.
                  The governor "ondemand" may decide which speed to use
                  within this range.
  current CPU frequency is 2.00 GHz.
  cpufreq stats: 3.17 GHz:14,05%, 2.67 GHz:3,89%, 2.34 GHz:5,60%, 2.00 GHz:76,46%  (387)

Ostatnio edytowany przez raven18 (2015-12-18 10:04:48)

mati75 · 2015-12-18 10:11:29

Jaka wersja jądra?

raven18 · 2015-12-18 10:18:49

Kod:

Linux debian 4.3-3.dmz.2-liquorix-amd64 #1 ZEN SMP PREEMPT Debian 4.3-7 (2015-12-17) x86_64 GNU/Linux

Na debianowym jest dokładnie to samo, dodam że wcześniej miałem inną płytę i było wszystko ok, ten sam procesor.

mati75 · 2015-12-18 12:17:44

Taki sam problem: https://bbs.archlinux.org/viewtopic.php?id=158463

Ogólnie coś jest nie tak z rozpoznawaniem cpu z tej rodziny przez nowe jądra. /proc/cpuinfo mi normalnie widzi:

Kod:

model name    : Intel(R) Xeon(R) CPU            5160  @ 3.00GHz

lscpu już nie.

raven18 · 2015-12-18 13:03:13

To raczej wina po części płyty/biosu, bo tak jak pisałem, na innej płycie było ok. No nic, przeżyję, aż tak bardzo mi to nie przeszkadza, temat jest z 2013 raczej już tego nie naprawią :) Dzięki

Time (s)	Query
0.00010	SET CHARSET latin2
0.00004	SET NAMES latin2
0.00097	SELECT u., g., o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.149.24.143' WHERE u.id=1
0.00057	REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '3.149.24.143', 1732266028)
0.00050	SELECT * FROM punbb_online WHERE logged<1732265728
0.00071	SELECT topic_id FROM punbb_posts WHERE id=294398
0.00074	SELECT id FROM punbb_posts WHERE topic_id=28002 ORDER BY posted
0.00089	SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=28002 AND t.moved_to IS NULL
0.00006	SELECT search_for, replace_with FROM punbb_censoring
0.00079	SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=28002 ORDER BY p.id LIMIT 0,25
0.00080	UPDATE punbb_topics SET num_views=num_views+1 WHERE id=28002
Total query time: 0.00617 s

Forum Debian Users Gang

Ogłoszenie

#1 2015-12-18 09:40:49

raven18 - Użytkownik

Błedy w rozpoznaniu procesora?

Kod:

Kod:

#2 2015-12-18 10:11:29

mati75 - Psuj

Re: Błedy w rozpoznaniu procesora?

#3 2015-12-18 10:18:49

raven18 - Użytkownik

Re: Błedy w rozpoznaniu procesora?

Kod:

#4 2015-12-18 12:17:44

mati75 - Psuj

Re: Błedy w rozpoznaniu procesora?

Kod:

#5 2015-12-18 13:03:13

raven18 - Użytkownik

Re: Błedy w rozpoznaniu procesora?

Stopka forum

Informacje debugowania