Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#1  2016-02-18 22:10:03

  lewyx84 - Użytkownik

lewyx84
Użytkownik
Zarejestrowany: 2013-10-29

Zmiana w 70-persistent-net.rules - brak reakcji

Czołem,
po którymś restarcie zamiast eth1, pojawił mi się eth2. Dokonałem więc zmian w /etc/udev/rules.d/70-persistent-net.rules, zamieniając eth2, na eth1

Kod:

# PCI device 0x10ec:0x8168 (r8169)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:e0:4c:68:05:e3", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

# PCI device 0x14e4:0x167a (tg3)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="F8:D1:11:3F:F5:81", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"

strzeliłem sobie restarcik i lipton :)  Dalej mam eth2 :)
W sumie nie ma to żadnego znaczenia, ot, takie widzimisię :)

Pzdr

Offline

 

#2  2016-02-19 01:22:51

  Jacekalex - Podobno człowiek...;)

Jacekalex
Podobno człowiek...;)
Skąd: /dev/urandom
Zarejestrowany: 2008-01-07

Re: Zmiana w 70-persistent-net.rules - brak reakcji

Spróbuj zmienić nazwę pliku na:

Kod:

/etc/udev/rules.d/80-net-setup-link.rules

u mnie na testingu amd64 (Stretch) to pomogło.

Ostatnio edytowany przez Jacekalex (2016-02-19 01:29:55)


W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem  para bellum  ;)       |       Pozdrawiam :)

Offline

 

#3  2016-02-19 14:03:04

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: Zmiana w 70-persistent-net.rules - brak reakcji

Trzeba było czytać informacje przy aktualizacji udeva:
[quote=/usr/share/doc/udev/README.Debian.gz]Legacy persistent network interface naming
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Debian releases up to 8 ("Jessie") and Ubuntu up to 15.04 had an udev rule
/lib/udev/rules.d/75-persistent-net-generator.rules which fixed the name of a
network interface that it got when its MAC address first appeared in a
dynamically created /etc/udev/rules.d/70-persistent-net.rules file.

This had inherent race conditions (which sometimes caused collisions and
interface names like "rename1"), required having to write state into /etc
(which isn't possible for read-only root), and did not work in virtualized
environments.

This old schema is deprecated in Debian 9 ("Stretch"), and will not
be supported any more in Debian 10.

[…]

Custom net interface naming
~~~~~~~~~~~~~~~~~~~~~~~~~~~
In some cases it is convenient to define your own specific names for network
interfaces. These can be customized in two different ways:

* You can create your own names via udev rules, based on arbitrary attribute
   and property matches. See man udev(7) for documentation how to write udev
   rules. For example, you can create /etc/udev/rules.d/76-netnames.rules with

   ------------ snip ----------
   # identify device by MAC address
   SUBSYSTEM=="net", ACTION=="add", ATTR{address}=="11:22:aa:bb:cc:33", NAME="eth-dmz"

   # identify by vendor/model ID
   SUBSYSTEM=="net", ACTION=="add", ENV{ID_VENDOR_ID}=="0x8086", \
       ENV{ID_MODEL_ID}=="0x1502", NAME="eth-intel-gb"

   # USB device by path
   # get ID_PATH if not present yet
   ENV{ID_PATH}=="", IMPORT{builtin}="path_id"
   SUBSYSTEM=="net", ACTION=="add", ENV{ID_PATH}=="*-usb-0:3:1*", NAME="eth-blue-hub"
   ------------ snip ----------

   The name of the rules file needs to have a prefix smaller than "80" so that
   it runs before /lib/udev/rules.d/80-net-setup-link.rules, and should have a
   prefix bigger than "75" so that it runs after 75-net-description.rules and
   thus you can use matches on ID_VENDOR and similar properties.

* Unless you disabled net.ifnames, you can change the policy
   (kernel/bios/path/MAC based naming) in an /etc/systemd/network/*.link file,
   for individual devices or entire device classes. See man systemd.link(5) for
   details about this. /lib/systemd/network/99-default.link is the default
   policy, and /lib/systemd/network/01-mac-for-usb.link makes it use MAC based
   names for USB devices.

Any of the above changes require an initrd update with "update-initramfs -u" to
get effective.[/quote]

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Możesz wyłączyć AdBlock — tu nie ma reklam ;-)

[ Generated in 0.010 seconds, 12 queries executed ]

Informacje debugowania

Time (s) Query
0.00011 SET CHARSET latin2
0.00005 SET NAMES latin2
0.00140 SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.117.192.64' WHERE u.id=1
0.00097 UPDATE punbb_online SET logged=1732997722 WHERE ident='18.117.192.64'
0.00026 SELECT * FROM punbb_online WHERE logged<1732997422
0.00122 DELETE FROM punbb_online WHERE ident='54.36.148.138'
0.00087 SELECT topic_id FROM punbb_posts WHERE id=297752
0.00111 SELECT id FROM punbb_posts WHERE topic_id=28296 ORDER BY posted
0.00078 SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=28296 AND t.moved_to IS NULL
0.00005 SELECT search_for, replace_with FROM punbb_censoring
0.00108 SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=28296 ORDER BY p.id LIMIT 0,25
0.00102 UPDATE punbb_topics SET num_views=num_views+1 WHERE id=28296
Total query time: 0.00892 s