Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
Jest taki dziwny problem po podłączniu raspberry pi z raspbian jessie na pokładzie po podłączeniu do sieci to automatycznie pada cała sieć restart serwera modemu i routera nic nie daje a serwer widzi dziwny ares mac, o raz cała sieć świruje nie ma neta wszystko normalnie pada serwer mamy postawiony na windows serwer. Jak można to rozgryźć?
Ostatnio edytowany przez tajwan (2016-01-28 13:33:57)
Offline
Mam zasilacz input 100-240v~50/60Hz 0.3A
Output:+5V 2A
Więc powinno być OK.
Ostatnio edytowany przez tajwan (2016-01-28 13:42:31)
Offline
Chyba mam jakiegoś lewego anima bo nie umie ogarnąć sieci lub tego ustawić cały czas się sieć sypie po podłączeniu a serwer mamy na windzie.
Ostatnio edytowany przez tajwan (2016-02-19 13:44:49)
Offline
2745
Ostatnio edytowany przez uzytkownikubunt (2016-12-01 01:35:09)
Offline
server@raspberrypi:~ $ dmesg [ 0.000000] Booting Linux on physical CPU 0xf00 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 4.1.13-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.8.3 20140303 (prerelease) (crosstool-NG linaro-1.13.1+bzr2650 - Linaro GCC 2014.03) ) #826 SMP PREEMPT Fri Nov 13 20:19:03 GMT 2015 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] Machine model: Raspberry Pi 2 Model B Rev 1.1 [ 0.000000] cma: Reserved 8 MiB at 0x3a800000 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] On node 0 totalpages: 241664 [ 0.000000] free_area_init_node: node 0, pgdat 8085f000, node_mem_map b9fa6000 [ 0.000000] Normal zone: 2124 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 241664 pages, LIFO batch:31 [ 0.000000] [bcm2709_smp_init_cpus] enter (9420->f3003010) [ 0.000000] [bcm2709_smp_init_cpus] ncores=4 [ 0.000000] PERCPU: Embedded 13 pages/cpu @b9f64000 s20608 r8192 d24448 u53248 [ 0.000000] pcpu-alloc: s20608 r8192 d24448 u53248 alloc=13*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 239540 [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2709.boardrev=0xa21041 bcm2709.serial=0x51dd1692 smsc95xx.macaddr=B8:27:EB:DD:16:92 bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 939496K/966656K available (5967K kernel code, 534K rwdata, 1652K rodata, 420K init, 757K bss, 18968K reserved, 8192K cma-reserved) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xbb800000 - 0xff000000 (1080 MB) lowmem : 0x80000000 - 0xbb000000 ( 944 MB) modules : 0x7f000000 - 0x80000000 ( 16 MB) .text : 0x80008000 - 0x80778f64 (7620 kB) .init : 0x80779000 - 0x807e2000 ( 420 kB) .data : 0x807e2000 - 0x80867b6c ( 535 kB) .bss : 0x8086a000 - 0x8092779c ( 758 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] Additional per-CPU info printed with stalls. [ 0.000000] NR_IRQS:608 [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000010] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000031] Switching to timer-based delay loop, resolution 52ns [ 0.000316] Console: colour dummy device 80x30 [ 0.002084] console [tty1] enabled [ 0.002149] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.002249] pid_max: default: 32768 minimum: 301 [ 0.002626] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.002692] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.004013] Initializing cgroup subsys blkio [ 0.004092] Initializing cgroup subsys memory [ 0.004161] Initializing cgroup subsys devices [ 0.004221] Initializing cgroup subsys freezer [ 0.004295] Initializing cgroup subsys net_cls [ 0.004407] CPU: Testing write buffer coherency: ok [ 0.004535] ftrace: allocating 20235 entries in 60 pages [ 0.054122] CPU0: update cpu_capacity 1024 [ 0.054206] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 [ 0.054252] [bcm2709_smp_prepare_cpus] enter [ 0.054415] Setting up static identity map for 0x8240 - 0x8274 [ 0.113972] [bcm2709_boot_secondary] cpu:1 started (0) 17 [ 0.114411] [bcm2709_secondary_init] enter cpu:1 [ 0.114465] CPU1: update cpu_capacity 1024 [ 0.114474] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 [ 0.133959] [bcm2709_boot_secondary] cpu:2 started (0) 16 [ 0.134324] [bcm2709_secondary_init] enter cpu:2 [ 0.134355] CPU2: update cpu_capacity 1024 [ 0.134363] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 [ 0.153997] [bcm2709_boot_secondary] cpu:3 started (0) 18 [ 0.154254] [bcm2709_secondary_init] enter cpu:3 [ 0.154283] CPU3: update cpu_capacity 1024 [ 0.154291] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 [ 0.154384] Brought up 4 CPUs [ 0.154517] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.154559] CPU: All CPU(s) started in HYP mode. [ 0.154595] CPU: Virtualization extensions available. [ 0.155602] devtmpfs: initialized [ 0.179924] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.180314] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.181452] pinctrl core: initialized pinctrl subsystem [ 0.182293] NET: Registered protocol family 16 [ 0.188094] DMA: preallocated 4096 KiB pool for atomic coherent allocations [ 0.189356] bcm2709.uart_clock = 3000000 [ 0.194210] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.194281] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.194506] Serial: AMBA PL011 UART driver [ 0.194719] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev2 [ 0.701257] console [ttyAMA0] enabled [ 0.705533] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.786446] bcm2708-dmaengine 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0xf35 [ 0.795205] bcm2708-dmaengine 3f007000.dma: Initialized 7 DMA channels (+ 1 legacy) [ 0.803623] bcm2708-dmaengine 3f007000.dma: Load BCM2835 DMA engine driver [ 0.810550] bcm2708-dmaengine 3f007000.dma: dma_debug:0 [ 0.816517] SCSI subsystem initialized [ 0.820531] usbcore: registered new interface driver usbfs [ 0.826165] usbcore: registered new interface driver hub [ 0.831636] usbcore: registered new device driver usb [ 0.837445] raspberrypi-firmware soc:firmware: Attached to firmware from 2015-11-18 15:43 [ 0.873027] Switched to clocksource arch_sys_counter [ 0.927203] FS-Cache: Loaded [ 0.930485] CacheFiles: Loaded [ 0.945244] NET: Registered protocol family 2 [ 0.950936] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.958206] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.964923] TCP: Hash tables configured (established 8192 bind 8192) [ 0.971414] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.977441] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.984208] NET: Registered protocol family 1 [ 0.989018] RPC: Registered named UNIX socket transport module. [ 0.995049] RPC: Registered udp transport module. [ 0.999776] RPC: Registered tcp transport module. [ 1.004519] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.012134] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 1.021741] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 1.043890] VFS: Disk quotas dquot_6.6.0 [ 1.048210] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.057870] FS-Cache: Netfs 'nfs' registered for caching [ 1.064404] NFS: Registering the id_resolver key type [ 1.069539] Key type id_resolver registered [ 1.073818] Key type id_legacy registered [ 1.080628] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.088289] io scheduler noop registered [ 1.092245] io scheduler deadline registered (default) [ 1.097795] io scheduler cfq registered [ 1.104260] BCM2708FB: allocated DMA memory fac00000 [ 1.109287] BCM2708FB: allocated DMA channel 0 @ f3007000 [ 1.120362] Console: switching to colour frame buffer device 82x26 [ 1.131836] Serial: 8250/16550 driver, 0 ports, IRQ sharing disabled [ 1.141143] vc-cma: Videocore CMA driver [ 1.146784] vc-cma: vc_cma_base = 0x00000000 [ 1.153175] vc-cma: vc_cma_size = 0x00000000 (0 MiB) [ 1.160180] vc-cma: vc_cma_initial = 0x00000000 (0 MiB) [ 1.167354] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB) [ 1.194430] brd: module loaded [ 1.207976] loop: module loaded [ 1.213702] vchiq: vchiq_init_state: slot_zero = 0xbac80000, is_master = 0 [ 1.223932] Loading iSCSI transport class v2.0-870. [ 1.231245] usbcore: registered new interface driver smsc95xx [ 1.238652] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.446297] Core Release: 2.80a [ 1.450899] Setting default values for core params [ 1.457236] Finished setting default values for core params [ 1.664746] Using Buffer DMA mode [ 1.669569] Periodic Transfer Interrupt Enhancement - disabled [ 1.676972] Multiprocessor Interrupt Enhancement - disabled [ 1.684152] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 1.690066] Dedicated Tx FIFOs mode [ 1.695468] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xbac14000 dma = 0xfac14000 len=9024 [ 1.708508] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints [ 1.731719] dwc_otg: Microframe scheduler enabled [ 1.731798] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x80402c54 [ 1.739340] WARN::hcd_init_fiq:413: FIQ ASM at 0x80402fb0 length 36 [ 1.747239] WARN::hcd_init_fiq:438: MPHI regs_base at 0xbb89a000 [ 1.754867] dwc_otg 3f980000.usb: DWC OTG Controller [ 1.761431] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 1.770394] dwc_otg 3f980000.usb: irq 32, io mem 0x00000000 [ 1.777598] Init: Port Power? op_state=1 [ 1.783076] Init: Power Port (0) [ 1.788106] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.796504] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.805320] usb usb1: Product: DWC OTG Controller [ 1.811563] usb usb1: Manufacturer: Linux 4.1.13-v7+ dwc_otg_hcd [ 1.819140] usb usb1: SerialNumber: 3f980000.usb [ 1.826151] hub 1-0:1.0: USB hub found [ 1.831490] hub 1-0:1.0: 1 port detected [ 1.837398] dwc_otg: FIQ enabled [ 1.837413] dwc_otg: NAK holdoff enabled [ 1.837423] dwc_otg: FIQ split-transaction FSM enabled [ 1.837464] Module dwc_common_port init [ 1.837860] usbcore: registered new interface driver usb-storage [ 1.845637] mousedev: PS/2 mouse device common for all mice [ 1.853549] bcm2835-cpufreq: min=600000 max=900000 [ 1.860176] sdhci: Secure Digital Host Controller Interface driver [ 1.867904] sdhci: Copyright(c) Pierre Ossman [ 1.874248] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0 [ 1.881628] mmc-bcm2835 3f300000.mmc: DMA channels allocated [ 1.923426] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.933400] ledtrig-cpu: registered to indicate activity on CPUs [ 1.941170] hidraw: raw HID events driver (C) Jiri Kosina [ 1.948384] usbcore: registered new interface driver usbhid [ 1.955537] usbhid: USB HID core driver [ 1.961204] Initializing XFRM netlink socket [ 1.967079] NET: Registered protocol family 17 [ 1.970618] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.972775] mmc0: new high speed SDHC card at address 0007 [ 1.973403] mmcblk0: mmc0:0007 SL32G 28.9 GiB [ 1.985674] mmcblk0: p1 p2 [ 2.001858] Key type dns_resolver registered [ 2.008262] Registering SWP/SWPB emulation handler [ 2.015674] registered taskstats version 1 [ 2.021622] vc-sm: Videocore shared memory driver [ 2.027938] [vc_sm_connected_init]: start [ 2.033643] Indeed it is in host mode hprt0 = 00021501 [ 2.053621] [vc_sm_connected_init]: end - returning 0 [ 2.065672] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [ 2.074720] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [ 2.213110] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 2.221451] Indeed it is in host mode hprt0 = 00001101 [ 2.423416] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [ 2.431813] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.441566] hub 1-1:1.0: USB hub found [ 2.447135] hub 1-1:1.0: 5 ports detected [ 2.733064] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 2.853391] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [ 2.861911] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.873705] smsc95xx v1.0.4 [ 2.937220] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:dd:16:92 [ 9.499124] EXT4-fs (mmcblk0p2): recovery complete [ 10.231267] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 10.242907] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 10.252751] devtmpfs: mounted [ 10.258281] Freeing unused kernel memory: 420K (80779000 - 807e2000) [ 10.583391] random: systemd urandom read with 80 bits of entropy available [ 10.597286] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) [ 10.615107] systemd[1]: Detected architecture 'arm'. [ 10.762008] NET: Registered protocol family 10 [ 10.770356] systemd[1]: Inserted module 'ipv6' [ 10.778972] systemd[1]: Set hostname to <raspberrypi>. [ 10.886295] uart-pl011 3f201000.uart: no DMA platform data [ 11.257035] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. [ 11.269084] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 11.280663] systemd[1]: Expecting device dev-ttyAMA0.device... [ 11.291103] systemd[1]: Starting Remote File Systems (Pre). [ 11.301021] systemd[1]: Reached target Remote File Systems (Pre). [ 11.309209] systemd[1]: Starting Encrypted Volumes. [ 11.318296] systemd[1]: Reached target Encrypted Volumes. [ 11.325799] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. [ 11.341115] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 11.354574] systemd[1]: Starting Swap. [ 11.362780] systemd[1]: Reached target Swap. [ 11.369187] systemd[1]: Expecting device dev-mmcblk0p1.device... [ 11.379528] systemd[1]: Starting Root Slice. [ 11.388066] systemd[1]: Created slice Root Slice. [ 11.394717] systemd[1]: Starting User and Session Slice. [ 11.404341] systemd[1]: Created slice User and Session Slice. [ 11.411941] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. [ 11.422966] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 11.431949] systemd[1]: Starting Delayed Shutdown Socket. [ 11.441647] systemd[1]: Listening on Delayed Shutdown Socket. [ 11.449351] systemd[1]: Starting Journal Socket (/dev/log). [ 11.459080] systemd[1]: Listening on Journal Socket (/dev/log). [ 11.466890] systemd[1]: Starting udev Control Socket. [ 11.476013] systemd[1]: Listening on udev Control Socket. [ 11.483428] systemd[1]: Starting udev Kernel Socket. [ 11.492338] systemd[1]: Listening on udev Kernel Socket. [ 11.499569] systemd[1]: Starting Journal Socket. [ 11.508385] systemd[1]: Listening on Journal Socket. [ 11.515315] systemd[1]: Starting System Slice. [ 11.523964] systemd[1]: Created slice System Slice. [ 11.530679] systemd[1]: Starting File System Check on Root Device... [ 11.544271] systemd[1]: Starting system-systemd\x2dfsck.slice. [ 11.555302] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 11.563572] systemd[1]: Starting system-getty.slice. [ 11.573225] systemd[1]: Created slice system-getty.slice. [ 11.580729] systemd[1]: Starting system-serial\x2dgetty.slice. [ 11.591423] systemd[1]: Created slice system-serial\x2dgetty.slice. [ 11.599885] systemd[1]: Starting Increase datagram queue length... [ 11.613786] systemd[1]: Starting Restore / save the current clock... [ 11.660800] systemd[1]: Starting Load Kernel Modules... [ 11.693585] systemd[1]: Started Set Up Additional Binary Formats. [ 11.702760] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 11.730356] systemd[1]: Mounting Debug File System... [ 11.747121] systemd[1]: Mounting POSIX Message Queue File System... [ 11.762351] systemd[1]: Mounted Huge Pages File System. [ 11.770303] systemd[1]: Starting udev Coldplug all Devices... [ 11.784837] systemd[1]: Starting Slices. [ 11.793539] systemd[1]: Reached target Slices. [ 11.808853] systemd[1]: Started Increase datagram queue length. [ 11.823817] fuse init (API version 7.23) [ 11.845065] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 11.861994] systemd[1]: Mounted Debug File System. [ 11.875017] systemd[1]: Mounted POSIX Message Queue File System. [ 11.896321] systemd[1]: Started Restore / save the current clock. [ 11.896488] i2c /dev entries driver [ 11.914754] systemd[1]: Started Load Kernel Modules. [ 11.935455] systemd[1]: Time has been changed [ 12.029046] systemd[1]: Started udev Coldplug all Devices. [ 12.131883] systemd[1]: Mounting FUSE Control File System... [ 12.145145] systemd[1]: Starting Apply Kernel Variables... [ 12.159804] systemd[1]: Mounting Configuration File System... [ 12.174023] systemd[1]: Starting Create Static Device Nodes in /dev... [ 12.189273] systemd[1]: Starting Syslog Socket. [ 12.198916] systemd[1]: Listening on Syslog Socket. [ 12.206321] systemd[1]: Starting Journal Service... [ 12.223367] systemd[1]: Started Journal Service. [ 12.382259] systemd-udevd[112]: starting version 215 [ 12.909326] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 13.154849] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 13.708039] systemd-journald[110]: Received request to flush runtime journal from PID 1 [ 14.015892] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 14.016498] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 14.193327] random: nonblocking pool is initialized [ 15.851557] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 15.852867] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 17.148904] cfg80211: Calling CRDA to update world regulatory domain [ 17.308345] cfg80211: World regulatory domain updated: [ 17.308372] cfg80211: DFS Master region: unset [ 17.308381] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 17.308394] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 17.308405] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 17.308416] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 17.308428] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 17.308440] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 17.308451] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 17.308462] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 17.308473] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 17.317840] Adding 102396k swap on /var/swap. Priority:-1 extents:5 across:1929212k SSFS
Offline
2747
Ostatnio edytowany przez uzytkownikubunt (2016-12-01 01:35:12)
Offline
Więcej nie ma
Offline
Podłączyłem lokalnie rpi+router+ komputer to wszystko dobrze działało pingowało i nic nie padało ani się nie zawieszało. Nie mam już pomysłów dla czego cała sieć pada jak podłącze rip.
Offline
Sprawdziłeś MAC-i czy nie ma konfliktu?
Offline
Mac i IP jest ok.
Offline
Serwery DHCP się nie gryzą?
Najprostszą opcją byłoby wgranie na nowo, bądź na drugą kartę czystego systemu i spróbowanie wtedy podpiąć.
Offline
Właśnie, strzelanie na ślepo. Ktoś wpadł na "mondry" pomysł na dodanie serwera dhcpd do raspbiana.
[b]tajwan[/b]:
sudo service dhcpd stop
i zobacz czy wtedy będzie się wywalać.
Offline
pierwsze słyszę aby dhcpd był w podstawowej instalce raspbiana - przecież to żadnego sensu nie ma.
tym niemniej jeśli jest to autor owego niewątliwie genialnego pomysłu zasługuje na wpis do księgi rekordów - przy jego wzroście spokojnie zostanie rekordowym kindybałem :)
mimo wszysto szukałbym w innym miejscu. niestety - nie dysponujemy wiedzą o tym, co kolega wątkotwórca sobie na tej malinie instalnął... a szkoda :(
Offline
[quote=ethanak]pierwsze słyszę aby dhcpd był w podstawowej instalce raspbiana - przecież to żadnego sensu nie ma.
tym niemniej jeśli jest to autor owego niewątliwie genialnego pomysłu zasługuje na wpis do księgi rekordów - przy jego wzroście spokojnie zostanie rekordowym kindybałem :)[/quote]
Serio, w najnowszym jessie siedzi. Do tego nadpisuje wszystko jak leci z /etc/network/interfaces.
Offline
jezusiemaryjojuzefieświnty... to dobrze że sobie osmc zainstalowałem bo pewnie bym do dzisiaj nie mógł swojej malinki uruchomić...
kto to (personalnie) wymyślił?
Offline
Dodam pytanie wieczorem na ich githubie. Interesuje mnie to strasznie. Leci właśnie dd na kartę z systemem, będę miał na czym sprawdzić.
Offline
ja mam zamiar zainstalować sobie jessie na b+... nam tam swoich parę programów, wheezy z jakimś starym jajkiem i chciałbym, aby wszystko mi ruszyło w ciągu paru godzin.
niestety nie mogę sobie pozwolić na dłuższy przestój pieca co.
Ostatnio edytowany przez ethanak (2016-02-23 18:04:22)
Offline
[quote=ethanak]ja mam zamiar zainstalować sobie jessie na b+... nam tam swoich parę programów, wheezy z jakimś starym jajkiem i chciałbym, aby wszystko mi ruszyło w ciągu paru godzin.
niestety nie mogę sobie pozwolić na dłuższy przestój pieca co.[/quote]
To zaopatrz się w zapasową kartę do RPI, i po prostu wyłączasz, wymiana karty, włączasz, razem może ze trzy minuty maksymalnie.
Do dłuższej zabawy,system na RPI można chyba na jakiejś witrualce zainstalować, KVM powinno dać rady.
EDIT:
[url=https://gist.github.com/stefanozanella/4608873]Na pewno da rady[/url].
Ostatnio edytowany przez Jacekalex (2016-02-23 20:05:52)
Offline
Da radę z qemu. Tak sprawdzałem obrazy z Debianem na raspberry 2. Kernel w sidzie obsługuje cpu. W experimental siedzi [deb]u-boot-rpi[/deb].
jazdy z dhcp:
pi@zero:~ $ dpkg -l | grep dhcp ii dhcpcd5 6.7.1-1+rpi5 armhf DHCPv4, IPv6RA and DHCPv6 client with IPv4LL support
dhcpcd5: Zainstalowana: 6.7.1-1+rpi5 Kandydująca: 6.7.1-1+rpi5 Tabela wersji: *** 6.7.1-1+rpi5 0 500 http://archive.raspberrypi.org/debian/ jessie/main armhf Packages 100 /var/lib/dpkg/status 6.7.1-1+rpi3 0 500 http://archive.raspberrypi.org/debian/ jessie/ui armhf Packages 6.0.5-2 0 500 http://mirrordirector.raspbian.org/raspbian/ jessie/main armhf Packages
To nie tyle co serwer, tylko klient pokroju network-manager. Co najlepsze wersja 6.7.1-1 nigdy nie była dostępna w Debianie.
Pomysł genialny. W wersji z gui jest załadowany jeszcze nm.
Ostatnio edytowany przez mati75 (2016-02-23 20:50:06)
Offline
[b]MATI75[/b] STAWIAM CI LITRA TY TO MASZ CHŁOPIE ŁEB WSZYSTKO TERAZ DZIAŁA SIEĆ NIE PADA
Ostatnio edytowany przez tajwan (2016-02-23 20:49:26)
Offline
Time (s) | Query |
---|---|
0.00009 | SET CHARSET latin2 |
0.00004 | SET NAMES latin2 |
0.00093 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.217.208.220' WHERE u.id=1 |
0.00109 | REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '18.217.208.220', 1732698197) |
0.00062 | SELECT * FROM punbb_online WHERE logged<1732697897 |
0.00074 | SELECT topic_id FROM punbb_posts WHERE id=297756 |
0.00005 | SELECT id FROM punbb_posts WHERE topic_id=28205 ORDER BY posted |
0.00083 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=28205 AND t.moved_to IS NULL |
0.00005 | SELECT search_for, replace_with FROM punbb_censoring |
0.00282 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=28205 ORDER BY p.id LIMIT 0,25 |
0.00141 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=28205 |
Total query time: 0.00867 s |