Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1

 

#1  2016-02-26 13:17:50

  bass - Użytkownik

bass
Użytkownik
Skąd: Czestochowa
Zarejestrowany: 2013-05-21

Odzyskiwanie utraconej pojemnosci dysku twardego

Dzien dobry.
Mam zewnetrzny dysk twardy o pojemnosci 160G
Problem polega na tym ze system "widzi" tylko 31,5G
Jak odzyskac nie widoczna pojemnosc?!

Kod:

Dysk /dev/sdb: 232,9 GiB, bajtów: 250058268160, sektorów: 488395055
Jednostki: sektorów, czyli 1 * 512 = 512 bajtów
Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 512
Rozmiar we/wy (minimalny/optymalny) w bajtach: 512 / 512
Typ etykiety dysku: dos
Identyfikator dysku: 0x0006d9d0

Urządzenie Rozruch Początek    Koniec   Sektory Rozmiar Id Typ
/dev/sdb1               2048 240089087 240087040  114,5G 83 Linux
/dev/sdb2          482107390 488394751   6287362      3G  5 Rozszerzona
/dev/sdb3  *       240089088 282683391  42594304   20,3G 83 Linux
/dev/sdb4          282683392 482105343 199421952   95,1G 83 Linux
/dev/sdb5          482107392 488394751   6287360      3G 82 Linux swap / Solaris

Wpisy w tablicy partycji nie są w tej kolejności, co na dysku.


Dysk /dev/sda: 31,5 GiB, bajtów: 33820286976, sektorów: 66055248
Jednostki: sektorów, czyli 1 * 512 = 512 bajtów
Rozmiar sektora (logiczny/fizyczny) w bajtach: 512 / 512
Rozmiar we/wy (minimalny/optymalny) w bajtach: 512 / 512
Typ etykiety dysku: dos
Identyfikator dysku: 0x00007d4e

Urządzenie Rozruch Początek   Koniec  Sektory Rozmiar Id Typ
/dev/sda1  *           2048 66054143 66052096   31,5G 83 Linux

Kod:

/dev/sdb1: UUID="66549465-b824-469b-8940-cade75894e35" TYPE="ext4" PARTUUID="0006d9d0-01"
/dev/sdb3: UUID="8cdf9c30-152b-403e-a731-f0e52ddd36fc" TYPE="ext4" PARTUUID="0006d9d0-03"
/dev/sdb4: UUID="db1d1be2-bfa7-4c16-bfa4-f95acb4ef70c" TYPE="ext4" PARTUUID="0006d9d0-04"
/dev/sdb5: UUID="6fef9a45-b8e7-4f1a-925b-7022c57fb63b" TYPE="swap" PARTUUID="0006d9d0-05"
/dev/sda1: UUID="23cabe8b-11d0-4c60-9bf4-52617e3dbef9" TYPE="ext4" PARTUUID="00007d4e-01"
darek1@darek:~$

Kiedys , prawdopodobnie na tym dysku instalowany byl Sabayon

Ostatnio edytowany przez bass (2016-02-26 13:19:03)

4.14.0-14.slh.1-aptosid-686 #1 SMP PREEMPT aptosid 4.14-23 (2018-01-22) i686 GNU/Linux

Offline

 

#2  2016-02-26 13:46:36

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Odzyskiwanie utraconej pojemnosci dysku twardego

Zainstaluj "parted", odpal i daj:

Kod:

# parted /dev/sda

(parted) unit MiB
(parted) print free

Ostatnio edytowany przez morfik (2016-02-26 13:46:57)

Offline

 

#3  2016-02-26 13:53:01

  bass - Użytkownik

bass
Użytkownik
Skąd: Czestochowa
Zarejestrowany: 2013-05-21

Re: Odzyskiwanie utraconej pojemnosci dysku twardego

Kod:

GNU Parted 3.2
Using /dev/sda
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted)                                                                  
(parted) unit MiB
(parted) print free                                                       
Model: ATA SAMSUNG SP1614N (scsi)
Disk /dev/sda: 32254MiB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Disk Flags: 

Number  Start     End       Size      Type     File system  Flags
        0,03MiB   1,00MiB   0,97MiB            Free Space
 1      1,00MiB   32253MiB  32252MiB  primary  ext4         boot
        32253MiB  32254MiB  0,54MiB            Free Space

Ostatnio edytowany przez bass (2016-02-26 13:53:34)

4.14.0-14.slh.1-aptosid-686 #1 SMP PREEMPT aptosid 4.14-23 (2018-01-22) i686 GNU/Linux

Offline

 

#4  2016-02-26 14:15:40

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Odzyskiwanie utraconej pojemnosci dysku twardego

No ten dysk ma 32G. xD

Offline

 

#5  2016-02-26 14:22:14

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: Odzyskiwanie utraconej pojemnosci dysku twardego

Kupiłeś go na allegro czy prosto od Chińczyka? :)

Offline

 

#6  2016-02-26 14:22:30

  młodyLinuxiarz - Użytkownik

młodyLinuxiarz
Użytkownik
Zarejestrowany: 2016-01-25

Re: Odzyskiwanie utraconej pojemnosci dysku twardego

Jeśli dobrze rozumiem wadliwy dysk to /dev/sda. Spróbuj najpierw usunąć tablicę partycji

Kod:

dd if=/dev/zero of=/dev/sdb bs=4M count=1

a potem utwórz ją na nowo fdiskiem lub cfdiskiem (utwórz jakąkolwiek partycję). Ewentualnie pokaż wynik polecenia

Kod:

hdparm -g /dev/sdb
Nic na siłę, wszystko młotkiem :-P

Offline

 

#7  2016-02-26 14:23:43

  bass - Użytkownik

bass
Użytkownik
Skąd: Czestochowa
Zarejestrowany: 2013-05-21

Re: Odzyskiwanie utraconej pojemnosci dysku twardego

No wlasnie ze nie:):):)
Ma napewno 160G . Jest na nim kilka tys. zdjęć . Chcialem odzyskac testdiskiem , ale on tez widzi tylko 32G .
Chyba przyjdzie pozegnac sie z nim:(

4.14.0-14.slh.1-aptosid-686 #1 SMP PREEMPT aptosid 4.14-23 (2018-01-22) i686 GNU/Linux

Offline

 

#8  2016-02-26 14:25:23

  bass - Użytkownik

bass
Użytkownik
Skąd: Czestochowa
Zarejestrowany: 2013-05-21

Re: Odzyskiwanie utraconej pojemnosci dysku twardego

Nie:)
To jest dysk ze starego kompa, ktorego kiedys , dawno temu uzywalem.
Jest to dysk samsunga

Kod:

/dev/sdb:
 geometry      = 30401/255/63, sectors = 488395055, start = 0

Ostatnio edytowany przez bass (2016-02-26 14:27:08)

4.14.0-14.slh.1-aptosid-686 #1 SMP PREEMPT aptosid 4.14-23 (2018-01-22) i686 GNU/Linux

Offline

 

#9  2016-02-26 14:28:38

  młodyLinuxiarz - Użytkownik

młodyLinuxiarz
Użytkownik
Zarejestrowany: 2016-01-25

Re: Odzyskiwanie utraconej pojemnosci dysku twardego

Chcesz odzyskać dane ? To dobrze by było gdybyś pokazał dane z dmesg' a


EDIT: Popełniłem błąd. Powinno być

Kod:

hdparm -g /dev/sda

Bo sda to ten wadliwy dysk(?)

Ostatnio edytowany przez młodyLinuxiarz (2016-02-26 14:33:20)

Nic na siłę, wszystko młotkiem :-P

Offline

 

#10  2016-02-26 14:33:58

  bass - Użytkownik

bass
Użytkownik
Skąd: Czestochowa
Zarejestrowany: 2013-05-21

Re: Odzyskiwanie utraconej pojemnosci dysku twardego

Kod:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.0-2.slh.3-aptosid-686 (s.l-h@gmx.de) (gcc version 5.3.1 20160220 (Debian 5.3.1-9) ) #1 SMP PREEMPT aptosid 4.4-12 (2016-02-24)
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fff2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007fff3000-0x000000007fffffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI:    /965P-S3, BIOS F3 08/11/2006
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7fff0 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CCFFF write-protect
[    0.000000]   CD000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-through
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] found SMP MP-table at [mem 0x000f5370-0x000f537f] mapped at [c00f5370]
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] BRK [0x0171c000, 0x0171cfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x36218000-0x37103fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6CB0 000014 (v00 GBT   )
[    0.000000] ACPI: RSDT 0x000000007FFF3040 000038 (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
[    0.000000] ACPI: FACP 0x000000007FFF30C0 000074 (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
[    0.000000] ACPI: DSDT 0x000000007FFF3180 00478B (v01 GBT    AWRDACPI 00001000 MSFT 0100000C)
[    0.000000] ACPI: FACS 0x000000007FFF0000 000040
[    0.000000] ACPI: MCFG 0x000000007FFF7A80 00003C (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
[    0.000000] ACPI: APIC 0x000000007FFF7980 000084 (v01 GBT    AWRDACPI 42302E31 AWRD 01010101)
[    0.000000] ACPI: SSDT 0x000000007FFF7B00 00015C (v01 PmRef  Cpu0Ist  00003000 INTL 20040311)
[    0.000000] ACPI: SSDT 0x000000007FFF7F90 000275 (v01 PmRef  CpuPm    00003000 INTL 20040311)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 1159MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] BRK [0x0171d000, 0x0171dfff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000377fdfff]
[    0.000000]   HighMem  [mem 0x00000000377fe000-0x000000007ffeffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000007ffeffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007ffeffff]
[    0.000000] On node 0 totalpages: 524174
[    0.000000]   DMA zone: 40 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 2180 pages used for memmap
[    0.000000]   Normal zone: 223230 pages, LIFO batch:31
[    0.000000]   HighMem zone: 296946 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x80000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 16 pages/cpu @f54ab000 s35148 r0 d30388 u65536
[    0.000000] pcpu-alloc: s35148 r0 d30388 u65536 alloc=16*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 521954
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-2.slh.3-aptosid-686 root=UUID=8cdf9c30-152b-403e-a731-f0e52ddd36fc ro apparmor=1 security=apparmor apparmor=1 security=apparmor apparmor=1 security=apparmor quiet
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] microcode: CPU0 microcode updated early to revision 0xd0, date = 2010-09-30
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:0007fff0)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 2052364K/2096696K available (4660K kernel code, 359K rwdata, 1364K rodata, 460K init, 372K bss, 44332K reserved, 0K cma-reserved, 1187784K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xfff16000 - 0xfffff000   ( 932 kB)
                   pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
                   vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
                     .init : 0xc163f000 - 0xc16b2000   ( 460 kB)
                     .data : 0xc148d51c - 0xc163dec0   (1730 kB)
                     .text : 0xc1000000 - 0xc148d51c   (4661 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]     Build-time adjustment of leaf fanout to 32.
[    0.000000]     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[    0.000000] NR_IRQS:2304 nr_irqs:456 16
[    0.000000] CPU 0 irqstacks, hard=f4c0a000 soft=f4c0c000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2133.427 MHz processor
[    0.002011] Calibrating delay loop (skipped), value calculated using timer frequency.. 4266.85 BogoMIPS (lpj=2133427)
[    0.002014] pid_max: default: 32768 minimum: 301
[    0.002021] ACPI: Core revision 20150930
[    0.006346] ACPI: 3 ACPI AML tables successfully acquired and loaded
[    0.006365] Security Framework initialized
[    0.006377] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.006379] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.006629] Initializing cgroup subsys io
[    0.006635] Initializing cgroup subsys memory
[    0.006643] Initializing cgroup subsys devices
[    0.006647] Initializing cgroup subsys freezer
[    0.006650] Initializing cgroup subsys net_cls
[    0.006653] Initializing cgroup subsys perf_event
[    0.006656] Initializing cgroup subsys net_prio
[    0.006659] Initializing cgroup subsys pids
[    0.006682] CPU: Physical Processor ID: 0
[    0.006684] CPU: Processor Core ID: 0
[    0.006690] mce: CPU supports 6 MCE banks
[    0.006699] CPU0: Thermal monitoring enabled (TM2)
[    0.006703] process: using mwait in idle threads
[    0.006711] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.006713] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.006906] Freeing SMP alternatives memory: 20K (c16b2000 - c16b7000)
[    0.008081] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.009258] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.020000] smpboot: CPU0: Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz (family: 0x6, model: 0xf, stepping: 0x6)
[    0.020000] Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
[    0.020000] perf_event_intel: PEBS disabled due to CPU errata
[    0.020000] ... version:                2
[    0.020000] ... bit width:              40
[    0.020000] ... generic registers:      2
[    0.020000] ... value mask:             000000ffffffffff
[    0.020000] ... max period:             000000007fffffff
[    0.020000] ... fixed-purpose events:   3
[    0.020000] ... event mask:             0000000700000003
[    0.027013] CPU 1 irqstacks, hard=f4cb2000 soft=f4cb4000
[    0.027016] x86: Booting SMP configuration:
[    0.027019] .... node  #0, CPUs:      #1
[    0.003000] microcode: CPU1 microcode updated early to revision 0xd0, date = 2010-09-30
[    0.003000] Initializing CPU#1
[    0.028038] x86: Booted up 1 node, 2 CPUs
[    0.028044] smpboot: Total of 2 processors activated (8533.70 BogoMIPS)
[    0.029083] devtmpfs: initialized
[    0.030211] PM: Registering ACPI NVS region [mem 0x7fff0000-0x7fff2fff] (12288 bytes)
[    0.030211] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.031004] pinctrl core: initialized pinctrl subsystem
[    0.031004] NET: Registered protocol family 16
[    0.033007] cpuidle: using governor ladder
[    0.037006] cpuidle: using governor menu
[    0.037143] ACPI: bus type PCI registered
[    0.037147] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.037242] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[    0.037245] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[    0.037246] PCI: Using MMCONFIG for extended config space
[    0.037248] PCI: Using configuration type 1 for base access
[    0.037383] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.037384] mtrr: probably your BIOS does not setup all CPUs.
[    0.037386] mtrr: corrected configuration.
[    0.042089] ACPI: Added _OSI(Module Device)
[    0.042091] ACPI: Added _OSI(Processor Device)
[    0.042093] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.042095] ACPI: Added _OSI(Processor Aggregator Device)
[    0.047131] ACPI: Dynamic OEM Table Load:
[    0.047137] ACPI: SSDT 0x00000000F4C3AF00 000087 (v01 PmRef  Cpu1Ist  00003000 INTL 20040311)
[    0.047471] ACPI: Interpreter enabled
[    0.047483] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[    0.047487] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    0.047502] ACPI: (supports S0 S3 S4 S5)
[    0.047504] ACPI: Using IOAPIC for interrupt routing
[    0.047534] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.052971] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.052978] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.052984] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.053033] acpi PNP0A03:00: host bridge window [io  0x0cf8-0x0cff] (ignored)
[    0.053036] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7 window] (ignored)
[    0.053039] acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff window] (ignored)
[    0.053042] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[    0.053044] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff window] (ignored)
[    0.053047] acpi PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff window] (ignored)
[    0.053048] PCI: root bus 00: using default resources
[    0.053266] PCI host bridge to bus 0000:00
[    0.053269] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.053272] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[    0.053274] pci_bus 0000:00: root bus resource [bus 00-3f]
[    0.053284] pci 0000:00:00.0: [8086:29a0] type 00 class 0x060000
[    0.053408] pci 0000:00:01.0: [8086:29a1] type 01 class 0x060400
[    0.053452] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.053570] pci 0000:00:1a.0: [8086:2834] type 00 class 0x0c0300
[    0.053612] pci 0000:00:1a.0: reg 0x20: [io  0xa000-0xa01f]
[    0.053687] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.053742] pci 0000:00:1a.1: [8086:2835] type 00 class 0x0c0300
[    0.053783] pci 0000:00:1a.1: reg 0x20: [io  0xa400-0xa41f]
[    0.053856] pci 0000:00:1a.1: System wakeup disabled by ACPI
[    0.053914] pci 0000:00:1a.7: [8086:283a] type 00 class 0x0c0320
[    0.053937] pci 0000:00:1a.7: reg 0x10: [mem 0xfa205000-0xfa2053ff]
[    0.054058] pci 0000:00:1a.7: System wakeup disabled by ACPI
[    0.054117] pci 0000:00:1b.0: [8086:284b] type 00 class 0x040300
[    0.054144] pci 0000:00:1b.0: reg 0x10: [mem 0xfa200000-0xfa203fff 64bit]
[    0.054206] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.054265] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.054321] pci 0000:00:1c.0: [8086:283f] type 01 class 0x060400
[    0.054392] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.054451] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.054508] pci 0000:00:1c.3: [8086:2845] type 01 class 0x060400
[    0.054578] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.054638] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.054693] pci 0000:00:1c.4: [8086:2847] type 01 class 0x060400
[    0.054763] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.054823] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.054878] pci 0000:00:1d.0: [8086:2830] type 00 class 0x0c0300
[    0.054919] pci 0000:00:1d.0: reg 0x20: [io  0xa800-0xa81f]
[    0.054992] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.055051] pci 0000:00:1d.1: [8086:2831] type 00 class 0x0c0300
[    0.055092] pci 0000:00:1d.1: reg 0x20: [io  0xac00-0xac1f]
[    0.055165] pci 0000:00:1d.1: System wakeup disabled by ACPI
[    0.055216] pci 0000:00:1d.2: [8086:2832] type 00 class 0x0c0300
[    0.055257] pci 0000:00:1d.2: reg 0x20: [io  0xb000-0xb01f]
[    0.055332] pci 0000:00:1d.2: System wakeup disabled by ACPI
[    0.055391] pci 0000:00:1d.7: [8086:2836] type 00 class 0x0c0320
[    0.055414] pci 0000:00:1d.7: reg 0x10: [mem 0xfa204000-0xfa2043ff]
[    0.055530] pci 0000:00:1d.7: System wakeup disabled by ACPI
[    0.055585] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[    0.055682] pci 0000:00:1e.0: System wakeup disabled by ACPI
[    0.055737] pci 0000:00:1f.0: [8086:2810] type 00 class 0x060100
[    0.055823] pci 0000:00:1f.0: can't claim BAR 13 [io  0x0400-0x047f]: address conflict with ACPI CPU throttle [io  0x0410-0x0415]
[    0.055829] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.055833] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[    0.055837] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[    0.055951] pci 0000:00:1f.2: [8086:2820] type 00 class 0x01018f
[    0.055969] pci 0000:00:1f.2: reg 0x10: [io  0xb400-0xb407]
[    0.055978] pci 0000:00:1f.2: reg 0x14: [io  0xb800-0xb803]
[    0.055986] pci 0000:00:1f.2: reg 0x18: [io  0xbc00-0xbc07]
[    0.055994] pci 0000:00:1f.2: reg 0x1c: [io  0xc000-0xc003]
[    0.056006] pci 0000:00:1f.2: reg 0x20: [io  0xc400-0xc40f]
[    0.056015] pci 0000:00:1f.2: reg 0x24: [io  0xc800-0xc80f]
[    0.056041] pci 0000:00:1f.2: PME# supported from D3hot
[    0.056144] pci 0000:00:1f.3: [8086:283e] type 00 class 0x0c0500
[    0.056158] pci 0000:00:1f.3: reg 0x10: [mem 0xfa206000-0xfa2060ff]
[    0.056185] pci 0000:00:1f.3: reg 0x20: [io  0x0500-0x051f]
[    0.056296] pci 0000:00:1f.5: [8086:2825] type 00 class 0x010185
[    0.056314] pci 0000:00:1f.5: reg 0x10: [io  0xd000-0xd007]
[    0.056322] pci 0000:00:1f.5: reg 0x14: [io  0xd400-0xd403]
[    0.056331] pci 0000:00:1f.5: reg 0x18: [io  0xd800-0xd807]
[    0.056339] pci 0000:00:1f.5: reg 0x1c: [io  0xdc00-0xdc03]
[    0.056347] pci 0000:00:1f.5: reg 0x20: [io  0xe000-0xe00f]
[    0.056355] pci 0000:00:1f.5: reg 0x24: [io  0xe400-0xe40f]
[    0.056380] pci 0000:00:1f.5: PME# supported from D3hot
[    0.056523] pci 0000:01:00.0: [10de:0400] type 00 class 0x030000
[    0.056545] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[    0.056557] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.056568] pci 0000:01:00.0: reg 0x1c: [mem 0xf4000000-0xf5ffffff 64bit]
[    0.056576] pci 0000:01:00.0: reg 0x24: [io  0x6000-0x607f]
[    0.056584] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.056675] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.056679] pci 0000:00:01.0:   bridge window [io  0x6000-0x6fff]
[    0.056683] pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf7ffffff]
[    0.056688] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.056736] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.056740] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.056828] pci 0000:03:00.0: [197b:2363] type 00 class 0x010185
[    0.056932] pci 0000:03:00.0: reg 0x24: [mem 0xfa000000-0xfa001fff]
[    0.056988] pci 0000:03:00.0: PME# supported from D3hot
[    0.057080] pci 0000:03:00.1: [197b:2363] type 00 class 0x010185
[    0.057111] pci 0000:03:00.1: reg 0x10: [io  0x7000-0x7007]
[    0.057122] pci 0000:03:00.1: reg 0x14: [io  0x7400-0x7403]
[    0.057132] pci 0000:03:00.1: reg 0x18: [io  0x7800-0x7807]
[    0.057143] pci 0000:03:00.1: reg 0x1c: [io  0x7c00-0x7c03]
[    0.057154] pci 0000:03:00.1: reg 0x20: [io  0x8000-0x800f]
[    0.057270] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.057281] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.057285] pci 0000:00:1c.3:   bridge window [io  0x7000-0x8fff]
[    0.057289] pci 0000:00:1c.3:   bridge window [mem 0xfa000000-0xfa0fffff]
[    0.057358] pci 0000:04:00.0: [11ab:4364] type 00 class 0x020000
[    0.057404] pci 0000:04:00.0: reg 0x10: [mem 0xf9000000-0xf9003fff 64bit]
[    0.057416] pci 0000:04:00.0: reg 0x18: [io  0x9000-0x90ff]
[    0.057459] pci 0000:04:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.057507] pci 0000:04:00.0: supports D1 D2
[    0.057510] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.059020] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.059027] pci 0000:00:1c.4:   bridge window [io  0x9000-0x9fff]
[    0.059032] pci 0000:00:1c.4:   bridge window [mem 0xf8000000-0xf9ffffff]
[    0.059099] pci 0000:05:02.0: [168c:001a] type 00 class 0x020000
[    0.059126] pci 0000:05:02.0: reg 0x10: [mem 0xfa100000-0xfa10ffff]
[    0.059300] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)
[    0.059307] pci 0000:00:1e.0:   bridge window [mem 0xfa100000-0xfa1fffff]
[    0.059313] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.059315] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.059339] pci_bus 0000:00: on NUMA node 0
[    0.059901] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[    0.059970] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[    0.060033] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[    0.060101] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
[    0.060167] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.060235] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.060302] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
[    0.060369] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[    0.060555] vgaarb: setting as boot device: PCI:0000:01:00.0
[    0.060555] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.060555] vgaarb: loaded
[    0.060555] vgaarb: bridge control possible 0000:01:00.0
[    0.060555] PCI: Using ACPI for IRQ routing
[    0.062051] PCI: pci_cache_line_size set to 64 bytes
[    0.062109] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[    0.062112] e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff]
[    0.062266] NetLabel: Initializing
[    0.062268] NetLabel:  domain hash size = 128
[    0.062269] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.062284] NetLabel:  unlabeled traffic allowed by default
[    0.062394] clocksource: Switched to clocksource refined-jiffies
[    0.062509] pnp: PnP ACPI init
[    0.062686] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.062689] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.062692] system 00:00: [io  0x0800-0x087f] has been reserved
[    0.062695] system 00:00: [io  0x0290-0x0294] has been reserved
[    0.062697] system 00:00: [io  0x0880-0x088f] has been reserved
[    0.062702] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.062741] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.063027] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.063257] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.063422] system 00:04: [io  0x0400-0x04bf] could not be reserved
[    0.063427] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.063661] system 00:05: [mem 0xf0000000-0xf3ffffff] has been reserved
[    0.063665] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.063888] system 00:06: [mem 0x000d0000-0x000d7fff] has been reserved
[    0.063892] system 00:06: [mem 0x000d9800-0x000dbfff] has been reserved
[    0.063895] system 00:06: [mem 0x000f0000-0x000fbfff] could not be reserved
[    0.063898] system 00:06: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.063901] system 00:06: [mem 0x7fff0000-0x7fffffff] could not be reserved
[    0.063903] system 00:06: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.063906] system 00:06: [mem 0x00100000-0x7ffeffff] could not be reserved
[    0.063909] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.063912] system 00:06: [mem 0xfed13000-0xfed1dfff] has been reserved
[    0.063915] system 00:06: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.063918] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.063921] system 00:06: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.063924] system 00:06: [mem 0xfff00000-0xffffffff] has been reserved
[    0.063926] system 00:06: [mem 0x000e0000-0x000effff] has been reserved
[    0.063930] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.063937] pnp: PnP ACPI: found 7 devices
[    0.100556] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.100567] clocksource: Switched to clocksource acpi_pm
[    0.100585] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[    0.100589] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[    0.100600] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.100609] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    0.100621] pci 0000:00:1f.0: BAR 13: [io  size 0x0080] has bogus alignment
[    0.100625] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.100628] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[    0.100631] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.100634] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.100637] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.100640] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.100643] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.100646] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[    0.100651] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
[    0.100655] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
[    0.100658] pci 0000:00:1c.3: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[    0.100661] pci 0000:00:1c.4: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref]
[    0.100665] pci 0000:01:00.0: BAR 6: assigned [mem 0xf7000000-0xf701ffff pref]
[    0.100668] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.100671] pci 0000:00:01.0:   bridge window [io  0x6000-0x6fff]
[    0.100675] pci 0000:00:01.0:   bridge window [mem 0xf4000000-0xf7ffffff]
[    0.100679] pci 0000:00:01.0:   bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[    0.100684] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.100687] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.100692] pci 0000:00:1c.0:   bridge window [mem 0x80000000-0x801fffff]
[    0.100696] pci 0000:00:1c.0:   bridge window [mem 0x80200000-0x803fffff 64bit pref]
[    0.100703] pci 0000:00:1c.3: PCI bridge to [bus 03]
[    0.100706] pci 0000:00:1c.3:   bridge window [io  0x7000-0x8fff]
[    0.100711] pci 0000:00:1c.3:   bridge window [mem 0xfa000000-0xfa0fffff]
[    0.100715] pci 0000:00:1c.3:   bridge window [mem 0x80400000-0x805fffff 64bit pref]
[    0.100722] pci 0000:04:00.0: BAR 6: assigned [mem 0xf8000000-0xf801ffff pref]
[    0.100724] pci 0000:00:1c.4: PCI bridge to [bus 04]
[    0.100728] pci 0000:00:1c.4:   bridge window [io  0x9000-0x9fff]
[    0.100733] pci 0000:00:1c.4:   bridge window [mem 0xf8000000-0xf9ffffff]
[    0.100737] pci 0000:00:1c.4:   bridge window [mem 0x80600000-0x807fffff 64bit pref]
[    0.100743] pci 0000:00:1e.0: PCI bridge to [bus 05]
[    0.100748] pci 0000:00:1e.0:   bridge window [mem 0xfa100000-0xfa1fffff]
[    0.100757] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.100759] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.100762] pci_bus 0000:01: resource 0 [io  0x6000-0x6fff]
[    0.100764] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf7ffffff]
[    0.100767] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[    0.100769] pci_bus 0000:02: resource 0 [io  0x5000-0x5fff]
[    0.100772] pci_bus 0000:02: resource 1 [mem 0x80000000-0x801fffff]
[    0.100774] pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
[    0.100777] pci_bus 0000:03: resource 0 [io  0x7000-0x8fff]
[    0.100779] pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfa0fffff]
[    0.100782] pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[    0.100784] pci_bus 0000:04: resource 0 [io  0x9000-0x9fff]
[    0.100786] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff]
[    0.100789] pci_bus 0000:04: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[    0.100791] pci_bus 0000:05: resource 1 [mem 0xfa100000-0xfa1fffff]
[    0.100794] pci_bus 0000:05: resource 4 [io  0x0000-0xffff]
[    0.100796] pci_bus 0000:05: resource 5 [mem 0x00000000-0xffffffff]
[    0.100830] NET: Registered protocol family 2
[    0.100992] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.100992] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.100992] TCP: Hash tables configured (established 8192 bind 8192)
[    0.100992] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.100992] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.100992] NET: Registered protocol family 1
[    0.100992] pci 0000:01:00.0: Video device with shadowed ROM
[    0.100992] pci 0000:03:00.0: async suspend disabled to avoid multi-function power-on ordering issue
[    0.100992] pci 0000:03:00.1: async suspend disabled to avoid multi-function power-on ordering issue
[    0.100992] PCI: CLS 32 bytes, default 64
[    0.100992] Unpacking initramfs...
[    0.454140] Freeing initrd memory: 15280K (f6218000 - f7104000)
[    0.454773] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.454843] audit: initializing netlink subsys (disabled)
[    0.454869] audit: type=2000 audit(1456492825.453:1): initialized
[    0.455195] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.457595] zbud: loaded
[    0.457760] VFS: Disk quotas dquot_6.6.0
[    0.457815] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.457994] Key type big_key registered
[    0.458539] Key type asymmetric registered
[    0.458543] Asymmetric key parser 'x509' registered
[    0.458562] bounce: pool size: 64 pages
[    0.458613] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[    0.458654] io scheduler noop registered
[    0.458657] io scheduler deadline registered
[    0.458705] io scheduler cfq registered (default)
[    0.459759] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.459770] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.459792] intel_idle: does not run on family 6 model 15
[    0.459834] GHES: HEST is not enabled!
[    0.459892] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.480427] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.480893] Linux agpgart interface v0.103
[    0.481203] libphy: Fixed MDIO Bus: probed
[    0.481249] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.481603] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.481649] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.481741] mousedev: PS/2 mouse device common for all mice
[    0.481799] rtc_cmos 00:01: RTC can wake from S4
[    0.481924] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[    0.481945] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram
[    0.482668] NET: Registered protocol family 10
[    0.483016] Key type dns_resolver registered
[    0.483257] microcode: CPU0 sig=0x6f6, pf=0x1, revision=0xd0
[    0.483267] microcode: CPU1 sig=0x6f6, pf=0x1, revision=0xd0
[    0.483310] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.483324] Using IPI No-Shortcut mode
[    0.483489] registered taskstats version 1
[    0.483511] zswap: loaded using pool lzo/zbud
[    0.483541] ima: No TPM chip found, activating TPM-bypass!
[    0.483944] rtc_cmos 00:01: setting system clock to 2016-02-26 13:20:27 UTC (1456492827)
[    0.484217] Freeing unused kernel memory: 460K (c163f000 - c16b2000)
[    0.495589] random: systemd-udevd urandom read with 1 bits of entropy available
[    0.535431] ACPI: bus type USB registered
[    0.535471] usbcore: registered new interface driver usbfs
[    0.535487] usbcore: registered new interface driver hub
[    0.535520] usbcore: registered new device driver usb
[    0.536288] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.536423] ehci-pci: EHCI PCI platform driver
[    0.537269] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    0.537280] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    0.541206] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[    0.541231] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfa205000
[    0.541939] uhci_hcd: USB Universal Host Controller Interface driver
[    0.542893] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    0.547041] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.547102] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.547105] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.547108] usb usb1: Product: EHCI Host Controller
[    0.547111] usb usb1: Manufacturer: Linux 4.4.0-2.slh.3-aptosid-686 ehci_hcd
[    0.547113] usb usb1: SerialNumber: 0000:00:1a.7
[    0.547289] hub 1-0:1.0: USB hub found
[    0.547298] hub 1-0:1.0: 4 ports detected
[    0.547612] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.547621] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    0.551516] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[    0.551534] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfa204000
[    0.555796] SCSI subsystem initialized
[    0.556429] sky2: driver version 1.30
[    0.556564] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 2
[    0.556970] sky2 0000:04:00.0 eth0: addr 00:16:e6:84:9c:b6
[    0.557180] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.557232] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.557235] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.557238] usb usb2: Product: EHCI Host Controller
[    0.557240] usb usb2: Manufacturer: Linux 4.4.0-2.slh.3-aptosid-686 ehci_hcd
[    0.557243] usb usb2: SerialNumber: 0000:00:1d.7
[    0.557505] hub 2-0:1.0: USB hub found
[    0.557515] hub 2-0:1.0: 6 ports detected
[    0.557842] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.557850] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.557883] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a000
[    0.557939] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.557942] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.557944] usb usb3: Product: UHCI Host Controller
[    0.557947] usb usb3: Manufacturer: Linux 4.4.0-2.slh.3-aptosid-686 uhci_hcd
[    0.557949] usb usb3: SerialNumber: 0000:00:1a.0
[    0.558138] hub 3-0:1.0: USB hub found
[    0.558148] hub 3-0:1.0: 2 ports detected
[    0.558367] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.558374] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    0.558403] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a400
[    0.558454] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.558457] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.558460] usb usb4: Product: UHCI Host Controller
[    0.558462] usb usb4: Manufacturer: Linux 4.4.0-2.slh.3-aptosid-686 uhci_hcd
[    0.558464] usb usb4: SerialNumber: 0000:00:1a.1
[    0.558622] hub 4-0:1.0: USB hub found
[    0.558631] hub 4-0:1.0: 2 ports detected
[    0.558846] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.558853] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    0.558875] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a800
[    0.558927] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.558929] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.558932] usb usb5: Product: UHCI Host Controller
[    0.558934] usb usb5: Manufacturer: Linux 4.4.0-2.slh.3-aptosid-686 uhci_hcd
[    0.558936] usb usb5: SerialNumber: 0000:00:1d.0
[    0.559072] libata version 3.00 loaded.
[    0.559102] hub 5-0:1.0: USB hub found
[    0.559112] hub 5-0:1.0: 2 ports detected
[    0.559287] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[    0.559360] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.559367] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    0.559398] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ac00
[    0.559450] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    0.559453] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.559455] usb usb6: Product: UHCI Host Controller
[    0.559457] usb usb6: Manufacturer: Linux 4.4.0-2.slh.3-aptosid-686 uhci_hcd
[    0.559460] usb usb6: SerialNumber: 0000:00:1d.1
[    0.559617] hub 6-0:1.0: USB hub found
[    0.559625] hub 6-0:1.0: 2 ports detected
[    0.559857] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.559864] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    0.559887] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b000
[    0.560328] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[    0.560331] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.560334] usb usb7: Product: UHCI Host Controller
[    0.560336] usb usb7: Manufacturer: Linux 4.4.0-2.slh.3-aptosid-686 uhci_hcd
[    0.560339] usb usb7: SerialNumber: 0000:00:1d.2
[    0.560488] hub 7-0:1.0: USB hub found
[    0.560498] hub 7-0:1.0: 2 ports detected
[    0.560840] ata_piix 0000:00:1f.2: version 2.13
[    0.560852] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[    0.565052] scsi host0: pata_jmicron
[    0.568886] scsi host1: pata_jmicron
[    0.568963] ata1: PATA max UDMA/100 cmd 0x7000 ctl 0x7400 bmdma 0x8000 irq 16
[    0.568966] ata2: PATA max UDMA/100 cmd 0x7800 ctl 0x7c00 bmdma 0x8008 irq 16
[    0.569114] ahci 0000:03:00.0: version 3.0
[    0.580073] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[    0.580078] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
[    0.581855] scsi host2: ahci
[    0.581989] scsi host3: ahci
[    0.582076] ata3: SATA max UDMA/133 abar m8192@0xfa000000 port 0xfa000100 irq 19
[    0.582080] ata4: SATA max UDMA/133 abar m8192@0xfa000000 port 0xfa000180 irq 19
[    0.598346] sky2 0000:04:00.0 enp4s0: renamed from eth0
[    0.712971] scsi host4: ata_piix
[    0.713181] scsi host5: ata_piix
[    0.713250] ata5: SATA max UDMA/133 cmd 0xb400 ctl 0xb800 bmdma 0xc400 irq 19
[    0.713255] ata6: SATA max UDMA/133 cmd 0xbc00 ctl 0xc000 bmdma 0xc408 irq 19
[    0.713361] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[    0.713961] scsi host6: ata_piix
[    0.714132] scsi host7: ata_piix
[    0.714200] ata7: SATA max UDMA/133 cmd 0xd000 ctl 0xd400 bmdma 0xe000 irq 19
[    0.714204] ata8: SATA max UDMA/133 cmd 0xd800 ctl 0xdc00 bmdma 0xe008 irq 19
[    0.726599] ata1.00: ATAPI: HL-DT-STDVD-RAM GH22NP20, 1.02, max UDMA/66
[    0.726735] ata1.01: HPA detected: current 66055248, native 312581808
[    0.726740] ata1.01: ATA-7: SAMSUNG SP1614N, TM100-24, max UDMA/100
[    0.726744] ata1.01: 66055248 sectors, multi 16: LBA48 
[    0.732597] ata1.00: configured for UDMA/66
[    0.735663] ata1.01: configured for UDMA/100
[    0.737986] scsi 0:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GH22NP20 1.02 PQ: 0 ANSI: 5
[    0.749914] scsi 0:0:1:0: Direct-Access     ATA      SAMSUNG SP1614N  0-24 PQ: 0 ANSI: 5
[    0.887058] ata3: SATA link down (SStatus 0 SControl 300)
[    0.888054] ata4: SATA link down (SStatus 0 SControl 300)
[    1.030750] ata7: SATA link down (SStatus 0 SControl 300)
[    1.041469] ata8: SATA link down (SStatus 0 SControl 300)
[    1.183035] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[    1.343828] ata6.00: SATA link down (SStatus 0 SControl 300)
[    1.343840] ata6.01: SATA link down (SStatus 4 SControl 300)
[    1.346083] usb 3-1: New USB device found, idVendor=17ef, idProduct=602d
[    1.346087] usb 3-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    1.346091] usb 3-1: Product: Lenovo Black Silk USB Keyboard
[    1.350515] hidraw: raw HID events driver (C) Jiri Kosina
[    1.379577] usbcore: registered new interface driver usbhid
[    1.379580] usbhid: USB HID core driver
[    1.380873] input: Lenovo Black Silk USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/0003:17EF:602D.0001/input/input3
[    1.431303] hid-generic 0003:17EF:602D.0001: input,hidraw0: USB HID v1.11 Keyboard [Lenovo Black Silk USB Keyboard] on usb-0000:00:1a.0-1/input0
[    1.437691] input: Lenovo Black Silk USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.1/0003:17EF:602D.0002/input/input4
[    1.454040] tsc: Refined TSC clocksource calibration: 2133.332 MHz
[    1.454045] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1ec03017d33, max_idle_ns: 440795287231 ns
[    1.474134] ata5.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.474147] ata5.01: SATA link down (SStatus 4 SControl 300)
[    1.488116] hid-generic 0003:17EF:602D.0002: input,hidraw1: USB HID v1.11 Device [Lenovo Black Silk USB Keyboard] on usb-0000:00:1a.0-1/input1
[    1.512122] ata5.00: HPA detected: current 488395055, native 488397168
[    1.512129] ata5.00: ATA-7: ST3250820AS, 3.AAE, max UDMA/133
[    1.512133] ata5.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.555043] usb 3-2: new low-speed USB device number 3 using uhci_hcd
[    1.587084] ata5.00: configured for UDMA/133
[    1.587315] scsi 4:0:0:0: Direct-Access     ATA      ST3250820AS      E    PQ: 0 ANSI: 5
[    1.590602] sd 0:0:1:0: [sda] 66055248 512-byte logical blocks: (33.8 GB/31.5 GiB)
[    1.590650] sd 4:0:0:0: [sdb] 488395055 512-byte logical blocks: (250 GB/233 GiB)
[    1.590728] sd 4:0:0:0: [sdb] Write Protect is off
[    1.590732] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.590778] sd 0:0:1:0: [sda] Write Protect is off
[    1.590781] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[    1.590796] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.590904] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.600212]  sda: sda1
[    1.611783] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.611787] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.611908] sd 0:0:1:0: [sda] Attached SCSI disk
[    1.611979] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.644880]  sdb: sdb1 sdb2 < sdb5 > sdb3 sdb4
[    1.645399] sd 4:0:0:0: [sdb] Attached SCSI disk
[    1.850153] random: nonblocking pool is initialized
[    1.916106] usb 3-2: New USB device found, idVendor=09da, idProduct=000a
[    1.916113] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.916116] usb 3-2: Product: USB Optical Mouse
[    1.916119] usb 3-2: Manufacturer: A4Tech
[    2.454120] clocksource: Switched to clocksource tsc
[    3.566033] floppy0: no floppy controllers found
[    3.584786] PM: Starting manual resume from disk
[    5.785433] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[    6.685614] systemd[1]: systemd 228 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    6.685786] systemd[1]: Detected architecture x86.
[    6.697987] systemd[1]: Set hostname to <darek>.
[    8.198239] systemd[1]: Listening on Syslog Socket.
[    8.198337] systemd[1]: Listening on Journal Socket.
[    8.198442] systemd[1]: Listening on Journal Audit Socket.
[    8.198476] systemd[1]: Listening on udev Kernel Socket.
[    8.198529] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    8.198706] systemd[1]: Created slice User and Session Slice.
[    8.198755] systemd[1]: Listening on udev Control Socket.
[    8.198792] systemd[1]: Listening on Journal Socket (/dev/log).
[    8.198831] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    8.198879] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    8.198909] systemd[1]: Listening on fsck to fsckd communication Socket.
[    8.198925] systemd[1]: Reached target Encrypted Volumes.
[    8.199102] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    8.199123] systemd[1]: Reached target Remote File Systems (Pre).
[    8.199138] systemd[1]: Reached target Remote File Systems.
[    8.199276] systemd[1]: Created slice System Slice.
[    8.209201] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    8.209928] systemd[1]: Starting Journal Service...
[    8.230185] systemd[1]: Starting Load Kernel Modules...
[    8.230974] systemd[1]: Mounting Debug File System...
[    8.231694] systemd[1]: Mounting POSIX Message Queue File System...
[    8.232418] systemd[1]: Starting LSB: Set console font and keymap...
[    8.233621] systemd[1]: Mounting Huge Pages File System...
[    8.233836] systemd[1]: Created slice system-getty.slice.
[    8.233860] systemd[1]: Reached target Slices.
[    8.321115] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    8.326244] systemd[1]: Starting Create Static Device Nodes in /dev...
[    8.716154] systemd[1]: Started Journal Service.
[    8.855153] lp: driver loaded but no devices found
[    8.881191] ppdev: user-space parallel port driver
[    8.912464] IT8718 SuperIO detected.
[    8.912719] parport_pc 00:03: reported by Plug and Play ACPI
[    8.912783] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    8.994223] lp0: using parport0 (interrupt-driven).
[    8.994227] lp0: console ready
[   11.936443] EXT4-fs (sdb3): re-mounted. Opts: errors=remount-ro
[   11.984752] systemd-journald[187]: Received request to flush runtime journal from PID 1
[   12.283314] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[   12.283321] ACPI: Power Button [PWRB]
[   12.283441] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[   12.283444] ACPI: Power Button [PWRF]
[   12.759140] sr 0:0:0:0: Attached scsi generic sg0 type 5
[   12.759188] sd 0:0:1:0: Attached scsi generic sg1 type 0
[   12.759229] sd 4:0:0:0: Attached scsi generic sg2 type 0
[   12.837347] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   13.010254] input: A4Tech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/0003:09DA:000A.0003/input/input8
[   13.010389] a4tech 0003:09DA:000A.0003: input,hidraw2: USB HID v1.10 Mouse [A4Tech USB Optical Mouse] on usb-0000:00:1a.0-2/input0
[   13.086512] [drm] Initialized drm 1.1.0 20060810
[   13.164659] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   13.509715] iTCO_vendor_support: vendor-support=0
[   13.527039] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   13.527081] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0460)
[   13.527206] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   13.540972] gpio_ich: GPIO from 462 to 511 on gpio_ich
[   13.657184] wmi: Mapper loaded
[   13.774980] ath5k 0000:05:02.0: registered as 'phy0'
[   13.849394] coretemp coretemp.0: Using relative temperature scale!
[   13.849412] coretemp coretemp.0: Using relative temperature scale!
[   13.965794] nouveau 0000:01:00.0: NVIDIA G84 (084000a2)
[   14.077529] nouveau 0000:01:00.0: bios: version 60.84.5e.00.00
[   14.095013] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC883: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[   14.095018] snd_hda_codec_realtek hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   14.095021] snd_hda_codec_realtek hdaudioC0D2:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   14.095024] snd_hda_codec_realtek hdaudioC0D2:    mono: mono_out=0x0
[   14.095026] snd_hda_codec_realtek hdaudioC0D2:    dig-out=0x1e/0x0
[   14.095029] snd_hda_codec_realtek hdaudioC0D2:    inputs:
[   14.095032] snd_hda_codec_realtek hdaudioC0D2:      Rear Mic=0x18
[   14.095035] snd_hda_codec_realtek hdaudioC0D2:      Front Mic=0x19
[   14.095037] snd_hda_codec_realtek hdaudioC0D2:      Line=0x1a
[   14.095039] snd_hda_codec_realtek hdaudioC0D2:      CD=0x1c
[   14.095042] snd_hda_codec_realtek hdaudioC0D2:    dig-in=0x1f
[   14.103322] nouveau 0000:01:00.0: fb: 256 MiB GDDR3
[   14.117661] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[   14.117756] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[   14.117845] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   14.117927] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   14.118924] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   14.119029] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   14.119195] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   14.160262] [TTM] Zone  kernel: Available graphics memory: 440170 kiB
[   14.160266] [TTM] Zone highmem: Available graphics memory: 1034062 kiB
[   14.160268] [TTM] Initializing pool allocator
[   14.160275] [TTM] Initializing DMA pool allocator
[   14.160292] nouveau 0000:01:00.0: DRM: VRAM: 256 MiB
[   14.160294] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[   14.160300] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[   14.160303] nouveau 0000:01:00.0: DRM: DCB version 4.0
[   14.160306] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000028
[   14.160309] nouveau 0000:01:00.0: DRM: DCB outp 01: 01000302 00000030
[   14.160312] nouveau 0000:01:00.0: DRM: DCB outp 02: 04011310 00000028
[   14.160315] nouveau 0000:01:00.0: DRM: DCB outp 03: 02011312 00020030
[   14.160317] nouveau 0000:01:00.0: DRM: DCB outp 04: 010223f1 00c0c080
[   14.160320] nouveau 0000:01:00.0: DRM: DCB conn 00: 2030
[   14.160323] nouveau 0000:01:00.0: DRM: DCB conn 01: 1161
[   14.160325] nouveau 0000:01:00.0: DRM: DCB conn 02: 0210
[   14.160328] nouveau 0000:01:00.0: DRM: DCB conn 03: 0211
[   14.160330] nouveau 0000:01:00.0: DRM: DCB conn 04: 0213
[   14.195143] nouveau 0000:01:00.0: DRM: failed to create encoder 0/1/0: -19
[   14.195147] nouveau 0000:01:00.0: DRM: TV-1 has no encoders, removing
[   14.195183] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   14.195185] [drm] Driver supports precise vblank timestamp query.
[   14.235544] nouveau 0000:01:00.0: DRM: MM: using CRYPT for buffer copies
[   14.312177] nouveau 0000:01:00.0: DRM: allocated 1920x1080 fb: 0x70000, bo f3e43400
[   14.312262] fbcon: nouveaufb (fb0) is primary device
[   14.393980] ath: EEPROM regdomain: 0x809c
[   14.393981] ath: EEPROM indicates we should expect a country code
[   14.393982] ath: doing EEPROM country->regdmn map search
[   14.393983] ath: country maps to regdmn code: 0x52
[   14.393984] ath: Country alpha2 being used: CN
[   14.393984] ath: Regpair used: 0x52
[   14.432515] Console: switching to colour frame buffer device 240x67
[   14.433962] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[   14.437033] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[   15.155246] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   15.155578] ath5k: phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
[   15.157059] ath5k 0000:05:02.0 wlp5s2: renamed from wlan0
[   15.419530] floppy0: no floppy controllers found
[   15.758808] Adding 3143676k swap on /dev/sdb5.  Priority:-1 extents:1 across:3143676k FS
[   15.845595] cfg80211: World regulatory domain updated:
[   15.845600] cfg80211:  DFS Master region: unset
[   15.845602] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   15.845605] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   15.845608] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   15.845610] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[   15.845613] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[   15.845617] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[   15.845619] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[   15.845621] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[   15.845624] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[   15.876186] cfg80211: Regulatory domain changed to country: CN
[   15.876191] cfg80211:  DFS Master region: FCC
[   15.876192] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[   15.876196] cfg80211:   (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[   15.876199] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
[   15.876202] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[   15.876205] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[   15.876207] cfg80211:   (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[   15.876209] cfg80211:   (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
[   15.876211] cfg80211:   (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[   17.779700] EXT4-fs (sdb4): 1 orphan inode deleted
[   17.779705] EXT4-fs (sdb4): recovery complete
[   17.860171] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null)
[   22.533561] ip_tables: (C) 2000-2006 Netfilter Core Team
[   22.947076] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   24.265135] NET: Registered protocol family 17
[   24.394581] Bluetooth: Core ver 2.21
[   24.394604] NET: Registered protocol family 31
[   24.394606] Bluetooth: HCI device and connection manager initialized
[   24.394612] Bluetooth: HCI socket layer initialized
[   24.394615] Bluetooth: L2CAP socket layer initialized
[   24.394623] Bluetooth: SCO socket layer initialized
[   24.533799] Netfilter messages via NETLINK v0.30.
[   26.708081] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[   26.711088] sky2 0000:04:00.0 enp4s0: enabling interface
[   26.711167] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[   26.745364] IPv6: ADDRCONF(NETDEV_UP): wlp5s2: link is not ready
[   26.755157] IPv6: ADDRCONF(NETDEV_UP): wlp5s2: link is not ready
[   27.356554] IPv6: ADDRCONF(NETDEV_UP): wlp5s2: link is not ready
[   29.161878] sky2 0000:04:00.0 enp4s0: Link is up at 1000 Mbps, full duplex, flow control rx
[   29.161878] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[   55.229177] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   55.229181] Bluetooth: BNEP filters: protocol multicast
[   55.229186] Bluetooth: BNEP socket layer initialized
[  499.695672] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[  499.695678] ata1.01: BMDMA stat 0x64
[  499.695682] ata1.01: failed command: READ DMA
[  499.695688] ata1.01: cmd c8/00:02:02:08:00/00:00:00:00:00/f0 tag 0 dma 1024 in
                        res 51/84:00:03:08:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error)
[  499.695691] ata1.01: status: { DRDY ERR }
[  499.695693] ata1.01: error: { ICRC ABRT }
[  499.695711] ata1: soft resetting link
[  499.911574] ata1.00: configured for UDMA/66
[  499.914634] ata1.01: configured for UDMA/100
[  499.915687] ata1: EH complete
[  500.036547] EXT4-fs (sda1): recovery complete
[  500.048468] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)

Kod:

/dev/sda:
 geometry      = 4111/255/63, sectors = 66055248, start = 0

Ostatnio edytowany przez bass (2016-02-26 14:37:52)

4.14.0-14.slh.1-aptosid-686 #1 SMP PREEMPT aptosid 4.14-23 (2018-01-22) i686 GNU/Linux

Offline

 

#11  2016-02-26 14:45:31

  uzytkownikubunt - Zbanowany

uzytkownikubunt
Zbanowany
Zarejestrowany: 2012-04-25

Re: Odzyskiwanie utraconej pojemnosci dysku twardego

2773

Ostatnio edytowany przez uzytkownikubunt (2016-12-01 01:35:44)

Offline

 

#12  2016-02-26 15:09:35

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: Odzyskiwanie utraconej pojemnosci dysku twardego

Kod:

[  499.695672] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[  499.695678] ata1.01: BMDMA stat 0x64
[  499.695682] ata1.01: failed command: READ DMA
[  499.695688] ata1.01: cmd c8/00:02:02:08:00/00:00:00:00:00/f0 tag 0 dma 1024 in
                        res 51/84:00:03:08:00/00:00:00:00:00/f0 Emask 0x10 (ATA bus error)
[  499.695691] ata1.01: status: { DRDY ERR }
[  499.695693] ata1.01: error: { ICRC ABRT }

[/quote]
Ten fragment sugeruje jakieś sprzętowe problemy.

Próbowałeś go podłączyć do innego komputera?

Offline

 

#13  2016-02-26 19:09:27

  bass - Użytkownik

bass
Użytkownik
Skąd: Czestochowa
Zarejestrowany: 2013-05-21

Re: Odzyskiwanie utraconej pojemnosci dysku twardego

Przepraszam ze nie odpisywalem. mam taka prace ze pod fonem jestem i musialem znikac.

Dysk poszedl w kosz! Nie bede go ratowal, Chyba z nim jest cos nie tak , bo przed jego podlaczeniem wszystko gralo, po jego podlaczeniu system zwolnil i nie moglem uruchomic zadnych aplikacji.

Dzieki za chęci , wole wykorzystac Wasza wiedze do innych celow:)

4.14.0-14.slh.1-aptosid-686 #1 SMP PREEMPT aptosid 4.14-23 (2018-01-22) i686 GNU/Linux

Offline

 

 

Strony: 1

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
To nie jest tylko forum, to nasza mała ojczyzna ;-)

[ Generated in 0.009 seconds, 11 queries executed ]

Informacje debugowania

Time (s) Query
0.00009 SET CHARSET latin2
0.00004 SET NAMES latin2
0.00098 SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.148.108.144' WHERE u.id=1
0.00066 REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '3.148.108.144', 1732288484)
0.00041 SELECT * FROM punbb_online WHERE logged<1732288184
0.00059 SELECT topic_id FROM punbb_posts WHERE id=298096
0.00021 SELECT id FROM punbb_posts WHERE topic_id=28320 ORDER BY posted
0.00059 SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=28320 AND t.moved_to IS NULL
0.00005 SELECT search_for, replace_with FROM punbb_censoring
0.00191 SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=28320 ORDER BY p.id LIMIT 0,25
0.00085 UPDATE punbb_topics SET num_views=num_views+1 WHERE id=28320
Total query time: 0.00638 s