Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1

 

#1  2016-05-07 12:22:35

  Novi-cjusz - Użytkownik

Novi-cjusz
Użytkownik
Zarejestrowany: 2013-03-05

Jessie nie bootuje.

Jessie przestala mi dzis rano bootowac. Mam HDD z 3 pdstawowymi partycjami a Jessie jest na drugiej. Odpalam kompa bootloader wykrywa wszystkie zainstalowane systemy, wybieram Jessie, trwa sekwencja startowa ktora bezposrednio przed oknem logowania konczy sie granatowym pulpitem z migajacym znakiem zachety. Mysz i klawiatura sa nieaktywne. Jedyna mozliwosc ingerencji w zablokowany system to "recovery mode" z poziomu Groba 2.0.2 lub jakas plytka CD naprawiajaca MBR zeby to zrobic z napedu optycznego. Recovery mode chcialbym uniknac zeby nie stracic dokonanych instalacji i ustawien.
Help.

Kod:

root@lucas-desktop:/home/lucas# fdisk -l 

Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x0006d088

Device     Boot     Start       End   Sectors   Size Id Type
/dev/sda1            2048 123074313 123072266  58.7G 83 Linux
/dev/sda2  *    123074560 245926122 122851563  58.6G 83 Linux
/dev/sda3       245954560 368834559 122880000  58.6G 83 Linux
/dev/sda4       368836606 617381887 248545282 118.5G  5 Extended
/dev/sda5       368836608 432062463  63225856  30.2G 83 Linux
/dev/sda6       432064512 494161919  62097408  29.6G 83 Linux
/dev/sda7       494163968 555937791  61773824  29.5G 83 Linux
/dev/sda8       555939840 617381887  61442048  29.3G 83 Linux

Debian siedzi na:

Kod:

/dev/sda2  *

Ostatnio edytowany przez Novi-cjusz (2016-05-07 15:25:29)

------------------------------------------------------------------------------------
"Inveniam viam aut faciam" : I will either find a way, or I shall make one
"Złoto to pieniądz królów, srebro to pieniądz dżentelmenów, barter to pieniądz chłopów ale dług to pieniądz niewolników."

Offline

 

#2  2016-05-07 12:29:08

  uzytkownikubunt - Zbanowany

uzytkownikubunt
Zbanowany
Zarejestrowany: 2012-04-25

Re: Jessie nie bootuje.

2988

Ostatnio edytowany przez uzytkownikubunt (2016-12-01 01:40:20)

Offline

 

#3  2016-05-07 13:14:36

  Novi-cjusz - Użytkownik

Novi-cjusz
Użytkownik
Zarejestrowany: 2013-03-05

Re: Jessie nie bootuje.

update
Potrzebne sa 2 rzeczy:
- narzedzie do naprawy MBR
- narzedziekomenda do backupu "zdrowego" MBR na wypadek ....wypadku.

Ktos tego probowal? http://pl.softoware.net/system-utilities/get-rescatux-for-linux.html

Ostatnio edytowany przez Novi-cjusz (2016-05-07 13:41:16)

------------------------------------------------------------------------------------
"Inveniam viam aut faciam" : I will either find a way, or I shall make one
"Złoto to pieniądz królów, srebro to pieniądz dżentelmenów, barter to pieniądz chłopów ale dług to pieniądz niewolników."

Offline

 

#4  2016-05-07 13:44:40

  uzytkownikubunt - Zbanowany

uzytkownikubunt
Zbanowany
Zarejestrowany: 2012-04-25

Re: Jessie nie bootuje.

2989

Ostatnio edytowany przez uzytkownikubunt (2016-12-01 01:40:21)

Offline

 

#5  2016-05-07 13:58:51

  Novi-cjusz - Użytkownik

Novi-cjusz
Użytkownik
Zarejestrowany: 2013-03-05

Re: Jessie nie bootuje.

napisalem juz - update.Jak wiesz jak to zrobic to napisz kolejne komendy albo podaj linka (;-)

------------------------------------------------------------------------------------
"Inveniam viam aut faciam" : I will either find a way, or I shall make one
"Złoto to pieniądz królów, srebro to pieniądz dżentelmenów, barter to pieniądz chłopów ale dług to pieniądz niewolników."

Offline

 

#6  2016-05-07 14:00:07

  arecki - Użytkownik

arecki
Użytkownik
Skąd: 44 Bronson Lane Hensonville
Zarejestrowany: 2016-03-03

Re: Jessie nie bootuje.

MBR z opisu wygląda na sprawny.
Opis wskazuje na problem menadżerem logowania.
Sprawdź czy przeinstalowanie menadżera pomoże.

Ostatnio edytowany przez arecki (2016-05-07 14:03:03)

Offline

 

#7  2016-05-07 14:08:22

  Novi-cjusz - Użytkownik

Novi-cjusz
Użytkownik
Zarejestrowany: 2013-03-05

Re: Jessie nie bootuje.

Dla Jessie z Gnome to bedzie "gdm3"

Wywalilem gdm3, ale nie wszystko:

Kod:

root@debian:/home/robin# apt-get --purge remove gdm3
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Package 'gdm3' is not installed, so not removed
The following packages were automatically installed and are no longer required:
  fonts-sil-gentium fonts-sil-gentium-basic hyphen-en-us libreoffice
  libreoffice-help-en-us libreoffice-report-builder-bin mythes-en-us
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 9 not upgraded.
root@debian:/home/robin# locate gdm3
/etc/gdm3
/etc/init.d/gdm3
/etc/insserv.conf.d/gdm3
/etc/rc0.d/K01gdm3
/etc/rc1.d/K01gdm3
/etc/rc2.d/S04gdm3
/etc/rc3.d/S04gdm3
/etc/rc4.d/S04gdm3
/etc/rc5.d/S04gdm3
/etc/rc6.d/K01gdm3
/lib/systemd/system/gdm3.service
/usr/lib/gdm3
/usr/sbin/gdm3
/usr/share/doc/gdm3
/usr/share/doc/gir1.2-gdm3
/usr/share/doc/gir1.2-gdm3/AUTHORS
/usr/share/doc/gir1.2-gdm3/NEWS.gz
/usr/share/doc/gir1.2-gdm3/README
/usr/share/doc/gir1.2-gdm3/changelog.Debian.gz
/usr/share/doc/gir1.2-gdm3/changelog.gz
/usr/share/doc/gir1.2-gdm3/copyright
/usr/share/lintian/overrides/gdm3
/usr/share/man/man8/gdm3.8.gz
/var/lib/gdm3
/var/lib/dpkg/info/gdm3.conffiles
/var/lib/dpkg/info/gdm3.config
/var/lib/dpkg/info/gdm3.list
/var/lib/dpkg/info/gdm3.md5sums
/var/lib/dpkg/info/gdm3.postinst
/var/lib/dpkg/info/gdm3.postrm
/var/lib/dpkg/info/gdm3.preinst
/var/lib/dpkg/info/gdm3.prerm
/var/lib/dpkg/info/gdm3.templates
/var/lib/dpkg/info/gir1.2-gdm3.list
/var/lib/dpkg/info/gir1.2-gdm3.md5sums
/var/lib/ucf/cache/:etc:gdm3:greeter.dconf-defaults
/var/log/gdm3

Zanim powtornie zainstaluje musze usunac wszystkie "poprzednie pozostalosci" Jaka komenda to zrobic najskuteczniej?
Jezeli reinstall trafi na stare pliki np konfigu to wszystko pozostanie po staremu.

Ostatnio edytowany przez Novi-cjusz (2016-05-07 15:24:15)

------------------------------------------------------------------------------------
"Inveniam viam aut faciam" : I will either find a way, or I shall make one
"Złoto to pieniądz królów, srebro to pieniądz dżentelmenów, barter to pieniądz chłopów ale dług to pieniądz niewolników."

Offline

 

#8  2016-05-07 15:34:44

  arecki - Użytkownik

arecki
Użytkownik
Skąd: 44 Bronson Lane Hensonville
Zarejestrowany: 2016-03-03

Re: Jessie nie bootuje.

Parametr purge usuwa też pliki konfiguracyjne.
Możesz ponownie instalować.
Wg twoich wyników nie jestem pewien czy rzeczywiście zadziałało to purge.
Obejrzyj czy czegoś nie ma /etc/gdm3/

Ostatnio edytowany przez arecki (2016-05-07 15:42:28)

Offline

 

#9  2016-05-07 15:54:40

  Novi-cjusz - Użytkownik

Novi-cjusz
Użytkownik
Zarejestrowany: 2013-03-05

Re: Jessie nie bootuje.

Przeinstalowalem gdm3 ale to nie poprawilo sytuacji, nadal bootowanie nie dochodzi do pulpitu z ekranem logowania. (;-(

------------------------------------------------------------------------------------
"Inveniam viam aut faciam" : I will either find a way, or I shall make one
"Złoto to pieniądz królów, srebro to pieniądz dżentelmenów, barter to pieniądz chłopów ale dług to pieniądz niewolników."

Offline

 

#10  2016-05-07 18:10:16

  arecki - Użytkownik

arecki
Użytkownik
Skąd: 44 Bronson Lane Hensonville
Zarejestrowany: 2016-03-03

Re: Jessie nie bootuje.

To zajrzyj do logów:
/var/log/Xorg.0.log

Offline

 

#11  2016-05-08 12:16:55

  Novi-cjusz - Użytkownik

Novi-cjusz
Użytkownik
Zarejestrowany: 2013-03-05

Re: Jessie nie bootuje.

Dzisiaj rano odpalilem normalnie - czyli system jest niestabilny.

Zajrzalem i niewiele widze, tylko na poczatku jest jakis error.

Kod:

[    18.309] 
X.Org X Server 1.16.4
Release Date: 2014-12-20
[    18.309] X Protocol Version 11, Revision 0
[    18.309] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[    18.309] Current Operating System: Linux debian 4.5.0-0.slh.1-aptosid-amd64 #1 SMP PREEMPT aptosid 4.5-1 (2016-03-14) x86_64
[    18.309] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.5.0-0.slh.1-aptosid-amd64 root=UUID=c9f2f7f2-fdf3-4cb2-8b04-db6bb478f774 ro
[    18.309] Build Date: 11 February 2015  12:32:02AM
[    18.309] xorg-server 2:1.16.4-1 (http://www.debian.org/support) 
[    18.309] Current version of pixman: 0.32.6
[    18.309]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[    18.309] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    18.309] (==) Log file: "/var/log/Xorg.0.log", Time: Sun May  8 10:34:25 2016
[    18.358] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    18.398] (==) No Layout section.  Using the first Screen section.
[    18.398] (==) No screen section available. Using defaults.
[    18.398] (**) |-->Screen "Default Screen Section" (0)
[    18.398] (**) |   |-->Monitor "<default monitor>"
[    18.407] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[    18.408] (==) Automatically adding devices
[    18.408] (==) Automatically enabling devices
[    18.408] (==) Automatically adding GPU devices
[    18.625] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[    18.625]     Entry deleted from font path.
[    18.740] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[    18.740] (==) ModulePath set to "/usr/lib/xorg/modules"
[    18.740] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    18.746] (II) Loader magic: 0x55fb2c995d80
[    18.746] (II) Module ABI versions:
[    18.746]     X.Org ANSI C Emulation: 0.4
[    18.746]     X.Org Video Driver: 18.0
[    18.746]     X.Org XInput driver : 21.0
[    18.746]     X.Org Server Extension : 8.0
[    18.746] (II) xfree86: Adding drm device (/dev/dri/card0)
[    18.749] (--) PCI:*(0:1:0:0) 10de:00cd:10de:029b rev 162, Mem @ 0xfd000000/16777216, 0xc0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072
[    18.749] (II) LoadModule: "glx"
[    18.777] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    18.846] (II) Module glx: vendor="X.Org Foundation"
[    18.846]     compiled for 1.16.4, module version = 1.0.0
[    18.846]     ABI class: X.Org Server Extension, version 8.0
[    18.846] (==) AIGLX enabled
[    18.846] (==) Matched nouveau as autoconfigured driver 0
[    18.846] (==) Matched nv as autoconfigured driver 1
[    18.846] (==) Matched nouveau as autoconfigured driver 2
[    18.846] (==) Matched nv as autoconfigured driver 3
[    18.846] (==) Matched modesetting as autoconfigured driver 4
[    18.846] (==) Matched fbdev as autoconfigured driver 5
[    18.846] (==) Matched vesa as autoconfigured driver 6
[    18.846] (==) Assigned the driver to the xf86ConfigLayout
[    18.846] (II) LoadModule: "nouveau"
[    18.854] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[    18.940] (II) Module nouveau: vendor="X.Org Foundation"
[    18.940]     compiled for 1.16.0, module version = 1.0.11
[    18.940]     Module class: X.Org Video Driver
[    18.940]     ABI class: X.Org Video Driver, version 18.0
[    18.940] (II) LoadModule: "nv"
[    18.940] (WW) Warning, couldn't open module nv
[    18.940] (II) UnloadModule: "nv"
[    18.940] (II) Unloading nv
[    18.940] (EE) Failed to load module "nv" (module does not exist, 0)
[    18.940] (II) LoadModule: "modesetting"
[    18.940] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    18.958] (II) Module modesetting: vendor="X.Org Foundation"
[    18.958]     compiled for 1.16.4, module version = 0.9.0
[    18.958]     Module class: X.Org Video Driver
[    18.958]     ABI class: X.Org Video Driver, version 18.0
[    18.958] (II) LoadModule: "fbdev"
[    18.958] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    19.001] (II) Module fbdev: vendor="X.Org Foundation"
[    19.001]     compiled for 1.15.99.904, module version = 0.4.4
[    19.001]     Module class: X.Org Video Driver
[    19.001]     ABI class: X.Org Video Driver, version 18.0
[    19.001] (II) LoadModule: "vesa"
[    19.001] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    19.004] (II) Module vesa: vendor="X.Org Foundation"
[    19.004]     compiled for 1.15.99.904, module version = 2.3.3
[    19.004]     Module class: X.Org Video Driver
[    19.004]     ABI class: X.Org Video Driver, version 18.0
[    19.004] (II) NOUVEAU driver Date:   Thu Aug 28 03:57:48 2014 +0200
[    19.004] (II) NOUVEAU driver for NVIDIA chipset families :
[    19.004]     RIVA TNT        (NV04)
[    19.004]     RIVA TNT2       (NV05)
[    19.004]     GeForce 256     (NV10)
[    19.004]     GeForce 2       (NV11, NV15)
[    19.004]     GeForce 4MX     (NV17, NV18)
[    19.004]     GeForce 3       (NV20)
[    19.004]     GeForce 4Ti     (NV25, NV28)
[    19.004]     GeForce FX      (NV3x)
[    19.005]     GeForce 6       (NV4x)
[    19.005]     GeForce 7       (G7x)
[    19.005]     GeForce 8       (G8x)
[    19.005]     GeForce GTX 200 (NVA0)
[    19.005]     GeForce GTX 400 (NVC0)
[    19.005] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    19.005] (II) FBDEV: driver for framebuffer: fbdev
[    19.005] (II) VESA: driver for VESA chipsets: vesa
[    19.005] (++) using VT number 7

[    19.007] (II) [drm] nouveau interface version: 1.3.1
[    19.007] (WW) Falling back to old probe method for modesetting
[    19.007] (WW) Falling back to old probe method for fbdev
[    19.007] (II) Loading sub module "fbdevhw"
[    19.007] (II) LoadModule: "fbdevhw"
[    19.007] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    19.018] (II) Module fbdevhw: vendor="X.Org Foundation"
[    19.018]     compiled for 1.16.4, module version = 0.0.2
[    19.018]     ABI class: X.Org Video Driver, version 18.0
[    19.018] (WW) Falling back to old probe method for vesa
[    19.018] (II) Loading sub module "dri2"
[    19.018] (II) LoadModule: "dri2"
[    19.018] (II) Module "dri2" already built-in
[    19.018] (--) NOUVEAU(0): Chipset: "NVIDIA NV42"
[    19.018] (II) NOUVEAU(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[    19.018] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[    19.018] (==) NOUVEAU(0): RGB weight 888
[    19.018] (==) NOUVEAU(0): Default visual is TrueColor
[    19.018] (==) NOUVEAU(0): Using HW cursor
[    19.018] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[    19.018] (==) NOUVEAU(0): Page flipping enabled
[    19.018] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[    19.018] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[    19.018] (II) NOUVEAU(0): Initializing outputs ...
[    19.048] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[    19.078] (II) NOUVEAU(0): Output DVI-I-2 has no monitor section
[    19.078] (II) NOUVEAU(0): 2 crtcs needed for screen.
[    19.078] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[    19.078] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[    19.108] (II) NOUVEAU(0): EDID for output DVI-I-1
[    19.108] (II) NOUVEAU(0): Manufacturer: HWP  Model: 3120  Serial#: 16843009
[    19.108] (II) NOUVEAU(0): Year: 2014  Week: 2
[    19.108] (II) NOUVEAU(0): EDID Version: 1.3
[    19.108] (II) NOUVEAU(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[    19.108] (II) NOUVEAU(0): Sync:  Separate
[    19.109] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 52  vert.: 29
[    19.109] (II) NOUVEAU(0): Gamma: 2.20
[    19.109] (II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
[    19.109] (II) NOUVEAU(0): Default color space is primary color space
[    19.109] (II) NOUVEAU(0): First detailed timing is preferred mode
[    19.109] (II) NOUVEAU(0): redX: 0.639 redY: 0.342   greenX: 0.323 greenY: 0.630
[    19.109] (II) NOUVEAU(0): blueX: 0.153 blueY: 0.051   whiteX: 0.313 whiteY: 0.329
[    19.109] (II) NOUVEAU(0): Supported established timings:
[    19.109] (II) NOUVEAU(0): 720x400@70Hz
[    19.109] (II) NOUVEAU(0): 640x480@60Hz
[    19.109] (II) NOUVEAU(0): 800x600@60Hz
[    19.109] (II) NOUVEAU(0): 1024x768@60Hz
[    19.109] (II) NOUVEAU(0): Manufacturer's mask: 0
[    19.109] (II) NOUVEAU(0): Supported standard timings:
[    19.109] (II) NOUVEAU(0): #0: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    19.109] (II) NOUVEAU(0): #1: hsize: 1280  vsize 720  refresh: 60  vid: 49281
[    19.109] (II) NOUVEAU(0): #2: hsize: 1600  vsize 900  refresh: 60  vid: 49321
[    19.109] (II) NOUVEAU(0): #3: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    19.109] (II) NOUVEAU(0): #4: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    19.109] (II) NOUVEAU(0): #5: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    19.109] (II) NOUVEAU(0): Supported detailed timing:
[    19.109] (II) NOUVEAU(0): clock: 148.5 MHz   Image Size:  476 x 268 mm
[    19.109] (II) NOUVEAU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    19.109] (II) NOUVEAU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    19.109] (II) NOUVEAU(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 94 kHz, PixClock max 175 MHz
[    19.109] (II) NOUVEAU(0): Monitor name: HP V241a
[    19.109] (II) NOUVEAU(0): Serial No: 3CQ40208T3
[    19.109] (II) NOUVEAU(0): EDID (in hex):
[    19.109] (II) NOUVEAU(0):     00ffffffffffff0022f0203101010101
[    19.109] (II) NOUVEAU(0):     0218010368341d782ead45a35752a127
[    19.109] (II) NOUVEAU(0):     0d5054a10800d1c081c0a9c0b3009500
[    19.109] (II) NOUVEAU(0):     818001010101023a801871382d40582c
[    19.109] (II) NOUVEAU(0):     4500dc0c1100001e000000fd00324c18
[    19.109] (II) NOUVEAU(0):     5e11000a202020202020000000fc0048
[    19.109] (II) NOUVEAU(0):     502056323431610a20202020000000ff
[    19.109] (II) NOUVEAU(0):     00334351343032303854330a20200083
[    19.109] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[    19.109] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    19.109] (II) NOUVEAU(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    19.109] (II) NOUVEAU(0): Modeline "1600x900"x60.0  108.00  1600 1624 1704 1800  900 901 904 1000 +hsync +vsync (60.0 kHz e)
[    19.109] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    19.109] (II) NOUVEAU(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    19.109] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    19.109] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    19.109] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    19.109] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    19.109] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    19.139] (II) NOUVEAU(0): EDID for output DVI-I-2
[    19.139] (II) NOUVEAU(0): Output DVI-I-1 connected
[    19.139] (II) NOUVEAU(0): Output DVI-I-2 disconnected
[    19.139] (II) NOUVEAU(0): Using exact sizes for initial modes
[    19.139] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080
[    19.139] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    19.139] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
[    19.139] (**) NOUVEAU(0):  Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
[    19.139] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    19.139] (**) NOUVEAU(0):  Driver mode "1680x1050": 146.2 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[    19.139] (II) NOUVEAU(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    19.139] (**) NOUVEAU(0):  Driver mode "1600x900": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[    19.139] (II) NOUVEAU(0): Modeline "1600x900"x60.0  108.00  1600 1624 1704 1800  900 901 904 1000 +hsync +vsync (60.0 kHz e)
[    19.139] (**) NOUVEAU(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[    19.139] (II) NOUVEAU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    19.139] (**) NOUVEAU(0):  Driver mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.9 Hz
[    19.139] (II) NOUVEAU(0): Modeline "1440x900"x59.9  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    19.139] (**) NOUVEAU(0):  Driver mode "1280x720": 74.2 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz
[    19.139] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    19.139] (**) NOUVEAU(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[    19.139] (II) NOUVEAU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    19.139] (**) NOUVEAU(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[    19.139] (II) NOUVEAU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    19.139] (**) NOUVEAU(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[    19.139] (II) NOUVEAU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    19.139] (**) NOUVEAU(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[    19.139] (II) NOUVEAU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    19.139] (==) NOUVEAU(0): DPI set to (96, 96)
[    19.139] (II) Loading sub module "fb"
[    19.139] (II) LoadModule: "fb"
[    19.139] (II) Loading /usr/lib/xorg/modules/libfb.so
[    19.270] (II) Module fb: vendor="X.Org Foundation"
[    19.270]     compiled for 1.16.4, module version = 1.0.0
[    19.270]     ABI class: X.Org ANSI C Emulation, version 0.4
[    19.270] (II) Loading sub module "shadowfb"
[    19.270] (II) LoadModule: "shadowfb"
[    19.270] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[    19.271] (II) Module shadowfb: vendor="X.Org Foundation"
[    19.271]     compiled for 1.16.4, module version = 1.0.0
[    19.271]     ABI class: X.Org ANSI C Emulation, version 0.4
[    19.271] (II) UnloadModule: "modesetting"
[    19.271] (II) Unloading modesetting
[    19.271] (II) UnloadModule: "fbdev"
[    19.271] (II) Unloading fbdev
[    19.271] (II) UnloadSubModule: "fbdevhw"
[    19.271] (II) Unloading fbdevhw
[    19.271] (II) UnloadModule: "vesa"
[    19.271] (II) Unloading vesa
[    19.271] (--) Depth 24 pixmap format is 32 bpp
[    19.272] (II) NOUVEAU(0): Channel setup complete.
[    19.289] (II) NOUVEAU(0): [DRI2] Setup complete
[    19.289] (II) NOUVEAU(0): [DRI2]   DRI driver: nouveau
[    19.289] (II) NOUVEAU(0): [DRI2]   VDPAU driver: nouveau
[    19.311] (II) Loading sub module "exa"
[    19.311] (II) LoadModule: "exa"
[    19.311] (II) Loading /usr/lib/xorg/modules/libexa.so
[    19.326] (II) Module exa: vendor="X.Org Foundation"
[    19.326]     compiled for 1.16.4, module version = 2.6.0
[    19.326]     ABI class: X.Org Video Driver, version 18.0
[    19.327] (II) EXA(0): Driver allocated offscreen pixmaps
[    19.327] (II) EXA(0): Driver registered support for the following operations:
[    19.327] (II)         Solid
[    19.327] (II)         Copy
[    19.327] (II)         Composite (RENDER acceleration)
[    19.327] (II)         UploadToScreen
[    19.327] (II)         DownloadFromScreen
[    19.327] (==) NOUVEAU(0): Backing store enabled
[    19.327] (==) NOUVEAU(0): Silken mouse enabled
[    19.327] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
[    19.327] (II) NOUVEAU(0): [XvMC] Extension initialized.
[    19.327] (==) NOUVEAU(0): DPMS enabled
[    19.328] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    19.450] (--) RandR disabled
[    19.548] (II) SELinux: Disabled on system
[    20.308] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    20.308] (II) AIGLX: enabled GLX_ARB_create_context
[    20.308] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    20.308] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    20.308] (II) AIGLX: enabled GLX_INTEL_swap_event
[    20.308] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    20.308] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    20.308] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    20.308] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    20.309] (II) AIGLX: Loaded and initialized nouveau
[    20.309] (II) GLX: Initialized DRI2 GL provider for screen 0
[    20.312] (II) NOUVEAU(0): NVEnterVT is called.
[    20.312] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
[    20.312] resize called 1920 1080
[    20.839] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    20.839] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    20.839] (II) LoadModule: "evdev"
[    20.839] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    20.884] (II) Module evdev: vendor="X.Org Foundation"
[    20.884]     compiled for 1.16.0, module version = 2.9.0
[    20.884]     Module class: X.Org XInput Driver
[    20.884]     ABI class: X.Org XInput driver, version 21.0
[    20.884] (II) Using input driver 'evdev' for 'Power Button'
[    20.884] (**) Power Button: always reports core events
[    20.884] (**) evdev: Power Button: Device: "/dev/input/event4"
[    20.884] (--) evdev: Power Button: Vendor 0 Product 0x1
[    20.884] (--) evdev: Power Button: Found keys
[    20.884] (II) evdev: Power Button: Configuring as keyboard
[    20.884] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event4"
[    20.884] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    20.884] (**) Option "xkb_rules" "evdev"
[    20.884] (**) Option "xkb_model" "pc105"
[    20.884] (**) Option "xkb_layout" "us"
[    20.885] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    20.885] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    20.885] (II) Using input driver 'evdev' for 'Power Button'
[    20.885] (**) Power Button: always reports core events
[    20.885] (**) evdev: Power Button: Device: "/dev/input/event3"
[    20.885] (--) evdev: Power Button: Vendor 0 Product 0x1
[    20.885] (--) evdev: Power Button: Found keys
[    20.885] (II) evdev: Power Button: Configuring as keyboard
[    20.885] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event3"
[    20.885] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    20.885] (**) Option "xkb_rules" "evdev"
[    20.885] (**) Option "xkb_model" "pc105"
[    20.886] (**) Option "xkb_layout" "us"
[    20.887] (II) config/udev: Adding input device SIGMACHIP USB Keyboard (/dev/input/event0)
[    20.887] (**) SIGMACHIP USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    20.887] (II) Using input driver 'evdev' for 'SIGMACHIP USB Keyboard'
[    20.887] (**) SIGMACHIP USB Keyboard: always reports core events
[    20.887] (**) evdev: SIGMACHIP USB Keyboard: Device: "/dev/input/event0"
[    20.887] (--) evdev: SIGMACHIP USB Keyboard: Vendor 0x1c4f Product 0x24
[    20.887] (--) evdev: SIGMACHIP USB Keyboard: Found keys
[    20.887] (II) evdev: SIGMACHIP USB Keyboard: Configuring as keyboard
[    20.887] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb8/8-3/8-3:1.0/0003:1C4F:0024.0001/input/input3/event0"
[    20.887] (II) XINPUT: Adding extended input device "SIGMACHIP USB Keyboard" (type: KEYBOARD, id 8)
[    20.887] (**) Option "xkb_rules" "evdev"
[    20.887] (**) Option "xkb_model" "pc105"
[    20.887] (**) Option "xkb_layout" "us"
[    20.888] (II) config/udev: Adding input device SIGMACHIP USB Keyboard (/dev/input/event1)
[    20.888] (**) SIGMACHIP USB Keyboard: Applying InputClass "evdev keyboard catchall"
[    20.888] (II) Using input driver 'evdev' for 'SIGMACHIP USB Keyboard'
[    20.888] (**) SIGMACHIP USB Keyboard: always reports core events
[    20.888] (**) evdev: SIGMACHIP USB Keyboard: Device: "/dev/input/event1"
[    20.889] (--) evdev: SIGMACHIP USB Keyboard: Vendor 0x1c4f Product 0x24
[    20.889] (--) evdev: SIGMACHIP USB Keyboard: Found 1 mouse buttons
[    20.889] (--) evdev: SIGMACHIP USB Keyboard: Found scroll wheel(s)
[    20.889] (--) evdev: SIGMACHIP USB Keyboard: Found relative axes
[    20.889] (II) evdev: SIGMACHIP USB Keyboard: Forcing relative x/y axes to exist.
[    20.889] (--) evdev: SIGMACHIP USB Keyboard: Found absolute axes
[    20.889] (II) evdev: SIGMACHIP USB Keyboard: Forcing absolute x/y axes to exist.
[    20.889] (--) evdev: SIGMACHIP USB Keyboard: Found keys
[    20.889] (II) evdev: SIGMACHIP USB Keyboard: Configuring as mouse
[    20.889] (II) evdev: SIGMACHIP USB Keyboard: Configuring as keyboard
[    20.889] (II) evdev: SIGMACHIP USB Keyboard: Adding scrollwheel support
[    20.889] (**) evdev: SIGMACHIP USB Keyboard: YAxisMapping: buttons 4 and 5
[    20.889] (**) evdev: SIGMACHIP USB Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    20.889] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb8/8-3/8-3:1.1/0003:1C4F:0024.0002/input/input4/event1"
[    20.889] (II) XINPUT: Adding extended input device "SIGMACHIP USB Keyboard" (type: KEYBOARD, id 9)
[    20.889] (**) Option "xkb_rules" "evdev"
[    20.889] (**) Option "xkb_model" "pc105"
[    20.889] (**) Option "xkb_layout" "us"
[    20.889] (II) evdev: SIGMACHIP USB Keyboard: initialized for relative axes.
[    20.889] (WW) evdev: SIGMACHIP USB Keyboard: ignoring absolute axes.
[    20.890] (**) SIGMACHIP USB Keyboard: (accel) keeping acceleration scheme 1
[    20.890] (**) SIGMACHIP USB Keyboard: (accel) acceleration profile 0
[    20.890] (**) SIGMACHIP USB Keyboard: (accel) acceleration factor: 2.000
[    20.890] (**) SIGMACHIP USB Keyboard: (accel) acceleration threshold: 4
[    20.890] (II) config/udev: Adding input device HID 1241:1177 (/dev/input/event2)
[    20.890] (**) HID 1241:1177: Applying InputClass "evdev pointer catchall"
[    20.890] (II) Using input driver 'evdev' for 'HID 1241:1177'
[    20.890] (**) HID 1241:1177: always reports core events
[    20.890] (**) evdev: HID 1241:1177: Device: "/dev/input/event2"
[    20.941] (--) evdev: HID 1241:1177: Vendor 0x1241 Product 0x1177
[    20.941] (--) evdev: HID 1241:1177: Found 3 mouse buttons
[    20.941] (--) evdev: HID 1241:1177: Found scroll wheel(s)
[    20.941] (--) evdev: HID 1241:1177: Found relative axes
[    20.941] (--) evdev: HID 1241:1177: Found x and y relative axes
[    20.941] (II) evdev: HID 1241:1177: Configuring as mouse
[    20.941] (II) evdev: HID 1241:1177: Adding scrollwheel support
[    20.941] (**) evdev: HID 1241:1177: YAxisMapping: buttons 4 and 5
[    20.941] (**) evdev: HID 1241:1177: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    20.941] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb8/8-5/8-5:1.0/0003:1241:1177.0003/input/input5/event2"
[    20.941] (II) XINPUT: Adding extended input device "HID 1241:1177" (type: MOUSE, id 10)
[    20.941] (II) evdev: HID 1241:1177: initialized for relative axes.
[    20.941] (**) HID 1241:1177: (accel) keeping acceleration scheme 1
[    20.941] (**) HID 1241:1177: (accel) acceleration profile 0
[    20.941] (**) HID 1241:1177: (accel) acceleration factor: 2.000
[    20.941] (**) HID 1241:1177: (accel) acceleration threshold: 4
[    20.942] (II) config/udev: Adding input device HID 1241:1177 (/dev/input/mouse0)
[    20.942] (II) No input driver specified, ignoring this device.
[    20.942] (II) This device may have been added with another device file.
[    20.942] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event7)
[    20.942] (II) No input driver specified, ignoring this device.
[    20.942] (II) This device may have been added with another device file.
[    20.942] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event8)
[    20.942] (II) No input driver specified, ignoring this device.
[    20.942] (II) This device may have been added with another device file.
[    20.942] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event9)
[    20.943] (II) No input driver specified, ignoring this device.
[    20.943] (II) This device may have been added with another device file.
[    20.943] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event10)
[    20.943] (II) No input driver specified, ignoring this device.
[    20.943] (II) This device may have been added with another device file.
[    20.944] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event11)
[    20.944] (II) No input driver specified, ignoring this device.
[    20.944] (II) This device may have been added with another device file.
[    20.945] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event12)
[    20.945] (II) No input driver specified, ignoring this device.
[    20.945] (II) This device may have been added with another device file.
[    20.945] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event13)
[    20.945] (II) No input driver specified, ignoring this device.
[    20.945] (II) This device may have been added with another device file.
[    20.946] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event14)
[    20.946] (II) No input driver specified, ignoring this device.
[    20.946] (II) This device may have been added with another device file.
[    20.946] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event6)
[    20.947] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    20.947] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[    20.947] (**) Eee PC WMI hotkeys: always reports core events
[    20.947] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event6"
[    20.947] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[    20.947] (--) evdev: Eee PC WMI hotkeys: Found keys
[    20.947] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[    20.947] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input9/event6"
[    20.947] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 11)
[    20.947] (**) Option "xkb_rules" "evdev"
[    20.947] (**) Option "xkb_model" "pc105"
[    20.947] (**) Option "xkb_layout" "us"
[    20.948] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    20.948] (II) No input driver specified, ignoring this device.
[    20.948] (II) This device may have been added with another device file.
[    27.096] (II) NOUVEAU(0): EDID vendor "HWP", prod id 12576
[    27.096] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[    27.096] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[    27.096] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    27.096] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    27.096] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    27.096] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    27.096] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    27.096] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    27.096] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[    27.096] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
[    27.096] (II) NOUVEAU(0): Modeline "1600x900"x60.0  119.00  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz e)
[    27.096] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    27.096] (II) NOUVEAU(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    27.096] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    27.377] resize called 1920 1080
[    32.305] (II) NOUVEAU(0): EDID vendor "HWP", prod id 12576
[    32.305] (II) NOUVEAU(0): Using hsync ranges from config file
[    32.305] (II) NOUVEAU(0): Using vrefresh ranges from config file
[    32.305] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[    32.305] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    32.305] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    32.305] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    32.305] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    32.305] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    32.305] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[    32.305] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
[    32.305] (II) NOUVEAU(0): Modeline "1600x900"x60.0  119.00  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz e)
[    32.305] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    32.305] (II) NOUVEAU(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    32.305] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   268.283] (II) NOUVEAU(0): EDID vendor "HWP", prod id 12576
[   268.283] (II) NOUVEAU(0): Using hsync ranges from config file
[   268.283] (II) NOUVEAU(0): Using vrefresh ranges from config file
[   268.283] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[   268.283] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[   268.283] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   268.283] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   268.283] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   268.283] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   268.283] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[   268.283] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
[   268.283] (II) NOUVEAU(0): Modeline "1600x900"x60.0  119.00  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz e)
[   268.283] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[   268.283] (II) NOUVEAU(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[   268.283] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[   268.424] resize called 1920 1080
[   269.966] (II) NOUVEAU(0): EDID vendor "HWP", prod id 12576
[   269.966] (II) NOUVEAU(0): Using hsync ranges from config file
[   269.966] (II) NOUVEAU(0): Using vrefresh ranges from config file
[   269.966] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[   269.966] (II) NOUVEAU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[   269.966] (II) NOUVEAU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   269.966] (II) NOUVEAU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   269.966] (II) NOUVEAU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   269.966] (II) NOUVEAU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   269.966] (II) NOUVEAU(0): Modeline "1920x1080"x60.0  172.80  1920 2040 2248 2576  1080 1081 1084 1118 -hsync +vsync (67.1 kHz e)
[   269.966] (II) NOUVEAU(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 -hsync +vsync (44.8 kHz e)
[   269.966] (II) NOUVEAU(0): Modeline "1600x900"x60.0  119.00  1600 1696 1864 2128  900 901 904 932 -hsync +vsync (55.9 kHz e)
[   269.966] (II) NOUVEAU(0): Modeline "1680x1050"x0.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[   269.966] (II) NOUVEAU(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[   269.966] (II) NOUVEAU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)

Poniedzialek rano - znowu nie bootuje.

Ostatnio edytowany przez Novi-cjusz (2016-05-09 10:03:18)

------------------------------------------------------------------------------------
"Inveniam viam aut faciam" : I will either find a way, or I shall make one
"Złoto to pieniądz królów, srebro to pieniądz dżentelmenów, barter to pieniądz chłopów ale dług to pieniądz niewolników."

Offline

 

#12  2016-05-20 16:17:53

  Novi-cjusz - Użytkownik

Novi-cjusz
Użytkownik
Zarejestrowany: 2013-03-05

Re: Jessie nie bootuje.

Znowu podczas startu systemu przestalo mi dochodzic do ekranu logowania, bez jednoznacznej przyczyny.
Zatrzymuje sie na czarnym ekranie ze znakiem zachety, mysz dziala, klawiatura nie dziala.
Jedyne opcje jakie mi zostaja to miekki i twardy restart, czasami sie udaje odpalic w ten sposob.
nie moge tego kontynuowac bo zepsuje dysk twardy
Macie moze jakis pomysl? Bardzo prosze(:-(

------------------------------------------------------------------------------------
"Inveniam viam aut faciam" : I will either find a way, or I shall make one
"Złoto to pieniądz królów, srebro to pieniądz dżentelmenów, barter to pieniądz chłopów ale dług to pieniądz niewolników."

Offline

 

#13  2016-05-20 16:48:57

  uzytkownikubunt - Zbanowany

uzytkownikubunt
Zbanowany
Zarejestrowany: 2012-04-25

Re: Jessie nie bootuje.

3022

Ostatnio edytowany przez uzytkownikubunt (2016-12-01 01:41:03)

Offline

 

#14  2016-05-20 18:17:01

  Novi-cjusz - Użytkownik

Novi-cjusz
Użytkownik
Zarejestrowany: 2013-03-05

Re: Jessie nie bootuje.

Niestety:

Post nie może mieć więcej niż 65535 znaków (64 KB)[/quote]
Jessie ma systemd wiec z logami jest inaczej niz w Wheezy.
Wyczyszcze (z ustawien morfika) do ustawien domyslnych plik systemctl.config, moze to cos da??

------------------------------------------------------------------------------------
"Inveniam viam aut faciam" : I will either find a way, or I shall make one
"Złoto to pieniądz królów, srebro to pieniądz dżentelmenów, barter to pieniądz chłopów ale dług to pieniądz niewolników."

Offline

 

#15  2016-05-20 18:19:45

  uzytkownikubunt - Zbanowany

uzytkownikubunt
Zbanowany
Zarejestrowany: 2012-04-25

Re: Jessie nie bootuje.

3023

Ostatnio edytowany przez uzytkownikubunt (2016-12-01 01:41:04)

Offline

 

#16  2016-05-20 19:20:01

  Novi-cjusz - Użytkownik

Novi-cjusz
Użytkownik
Zarejestrowany: 2013-03-05

Re: Jessie nie bootuje.

Benedyktynska praca.
http://wklej.dug.net.pl/5146

------------------------------------------------------------------------------------
"Inveniam viam aut faciam" : I will either find a way, or I shall make one
"Złoto to pieniądz królów, srebro to pieniądz dżentelmenów, barter to pieniądz chłopów ale dług to pieniądz niewolników."

Offline

 

#17  2016-05-20 20:23:52

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Jessie nie bootuje.

Pewnie zarżnąłeś system kopiowaniem rzeczy bez zastanowienia się. Tam dalej jest moja morfikownia. xD

Offline

 

#18  2016-05-20 20:59:02

  Novi-cjusz - Użytkownik

Novi-cjusz
Użytkownik
Zarejestrowany: 2013-03-05

Re: Jessie nie bootuje.

Ale twoj plik sysctl.config zamienilem.
Ponadto 2 miesiace z twoim plikiem dzialalo wszystko bezblednie, popsulo sie ok 2 tyg wstecz.
Przyczyna moze byc inna.

Ostatnio edytowany przez Novi-cjusz (2016-05-20 21:08:10)

------------------------------------------------------------------------------------
"Inveniam viam aut faciam" : I will either find a way, or I shall make one
"Złoto to pieniądz królów, srebro to pieniądz dżentelmenów, barter to pieniądz chłopów ale dług to pieniądz niewolników."

Offline

 

#19  2016-05-21 09:24:36

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Jessie nie bootuje.

Nie mówię tylko o moim pliku, pewnie masz tam jakieś inne kwiatki. xD Zobacz na ten iptables, kto wie coś tam rozwalił, jak tego typu syf masz w samym logu. xD

Offline

 

#20  2016-05-21 11:56:11

  Novi-cjusz - Użytkownik

Novi-cjusz
Użytkownik
Zarejestrowany: 2013-03-05

Re: Jessie nie bootuje.

Iptables jest proste i funkcjonalne + sporo logowania.

Kod:

#!/bin/sh
iptables -F
iptables -X
# what was incoming but denied (optional but useful).
iptables -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables_INPUT_denied: " --log-level 7
iptables -A INPUT -i lo -j ACCEPT
iptables -A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
iptables -P INPUT DROP

# Log any traffic which was sent to you
# for forwarding (optional but useful).
iptables -A FORWARD -m limit --limit 5/min -j LOG --log-prefix "iptables_FORWARD_denied: " --log-level 7
iptables -P FORWARD DROP

iptables -I OUTPUT -m conntrack --ctstate NEW,INVALID -j LOG --log-prefix "OUTPUT"
iptables -A OUTPUT -m state –state ESTABLISHED -j ACCEPT
#iptables -A OUTPUT -j REJECT



ip6tables -F
ip6tables -X
# Log what was incoming but denied (optional but useful).
ip6tables -A INPUT -m limit --limit 5/min -j LOG --log-prefix "ip6tables_INPUT_denied: " --log-level 7
ip6tables -A INPUT -i lo -j ACCEPT
ip6tables -A INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT
ip6tables -P INPUT DROP

# Log any traffic which was sent to you
# for forwarding (optional but useful).
ip6tables -A FORWARD -m limit --limit 5/min -j LOG --log-prefix "ip6tables_FORWARD_denied: " --log-level 7
ip6tables -P FORWARD DROP

ip6tables -P OUTPUT DROP

Ostatnio edytowany przez Novi-cjusz (2016-05-21 12:03:48)

------------------------------------------------------------------------------------
"Inveniam viam aut faciam" : I will either find a way, or I shall make one
"Złoto to pieniądz królów, srebro to pieniądz dżentelmenów, barter to pieniądz chłopów ale dług to pieniądz niewolników."

Offline

 

#21  2016-05-21 13:01:22

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Jessie nie bootuje.

To był tylko przykład. Zastanów się co robiłeś z tym systemem zanim ci się zaczęły dziać takie problemy.

Offline

 

 

Strony: 1

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Możesz wyłączyć AdBlock — tu nie ma reklam ;-)

[ Generated in 0.012 seconds, 11 queries executed ]

Informacje debugowania

Time (s) Query
0.00016 SET CHARSET latin2
0.00007 SET NAMES latin2
0.00149 SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.223.108.59' WHERE u.id=1
0.00077 REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '18.223.108.59', 1731787809)
0.00069 SELECT * FROM punbb_online WHERE logged<1731787509
0.00048 SELECT topic_id FROM punbb_posts WHERE id=301690
0.00129 SELECT id FROM punbb_posts WHERE topic_id=28598 ORDER BY posted
0.00069 SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=28598 AND t.moved_to IS NULL
0.00005 SELECT search_for, replace_with FROM punbb_censoring
0.00226 SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=28598 ORDER BY p.id LIMIT 0,25
0.00086 UPDATE punbb_topics SET num_views=num_views+1 WHERE id=28598
Total query time: 0.00881 s