Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1

 

#1  2016-08-03 20:25:48

  milik - Użytkownik

milik
Użytkownik
Zarejestrowany: 2008-11-11

Wolny system a test dysku

Mam zainstalowanego Jessie na lapku, instalacja z XFce i minimalna ilość oprogramowania. Do tego trochę zdjęć i kilka folderów na dysku z dokumentami firmowymi. Przy takiej ilości danych, komputer chodzi jakby był przeładowany danymi i programami, wszystkie aplikacje, razem z przeglądarką Iceweasel uruchamiają się i działają strasznie opornie. Może to problem odczytu i zapisu danych na dysku? Jest jakiś program, który wypluje prędkości zapisu i odczytu?

Kilka informacji:

Kod:

root@irin:/home/michal# arch
i686
root@irin:/home/michal# cat /proc/cpuinfo 
processor    : 0
vendor_id    : GenuineIntel
cpu family    : 6
model        : 14
model name    : Intel(R) Celeron(R) M CPU        440  @ 1.86GHz
stepping    : 12
microcode    : 0x54
cpu MHz        : 1862.015
cache size    : 1024 KB
physical id    : 0
siblings    : 1
core id        : 0
cpu cores    : 1
apicid        : 0
initial apicid    : 0
fdiv_bug    : no
f00f_bug    : no
coma_bug    : no
fpu        : yes
fpu_exception    : yes
cpuid level    : 10
wp        : yes
flags        : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx constant_tsc arch_perfmon bts aperfmperf pni monitor tm2 xtpr pdcm dtherm
bogomips    : 3724.03
clflush size    : 64
cache_alignment    : 64
address sizes    : 32 bits physical, 32 bits virtual
power management:

root@irin:/home/michal# cat /proc/version 
Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt25-2 (2016-04-08)
root@irin:/home/michal# uname -r 
3.16.0-4-686-pae
root@irin:/home/michal#

Już nie mówię, że nie mogę w OPEN SHOT żadnego filmu obrobić bo klatkuje jak szlag.

Ostatnio edytowany przez milik (2016-08-03 20:35:58)

Offline

 

#2  2016-08-03 22:34:06

  mati75 - Psuj

mati75
Psuj
Skąd: default city
Zarejestrowany: 2010-03-14
Serwis

Re: Wolny system a test dysku

iotop sprawdź

[img]https://l0calh0st.pl/obrazki/userbar.png[/img]

Offline

 

#3  2016-08-04 05:02:44

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Wolny system a test dysku

Zawsze się przyda też test i raport SMART.

Offline

 

#4  2016-08-04 18:41:18

  milik - Użytkownik

milik
Użytkownik
Zarejestrowany: 2008-11-11

Re: Wolny system a test dysku

Kod:

root@irin:/home/michal# fdisk -l

Disk /dev/sda: 74,5 GiB, 80026361856 bytes, 156301488 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0xa6659988

Device     Boot     Start       End   Sectors  Size Id Type
/dev/sda1  *         2048 152147967 152145920 72,6G 83 Linux
/dev/sda2       152150014 156301311   4151298    2G  5 Extended
/dev/sda5       152150016 156301311   4151296    2G 82 Linux swap / Solaris

root@irin:/home/michal# smartctl -a /dev/sda
smartctl 6.4 2014-10-07 r4002 [i686-linux-3.16.0-4-686-pae] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Hitachi Travelstar 5K160
Device Model:     Hitachi HTS541680J9SA00
Serial Number:    SB2241SGDYBGTE
LU WWN Device Id: 5 000cca 522db7159
Firmware Version: SB2OC70P
User Capacity:    80,026,361,856 bytes [80,0 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ATA/ATAPI-7 T13/1532D revision 1
Local Time is:    Thu Aug  4 18:40:47 2016 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)    Offline data collection activity
                    was never started.
                    Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever 
                    been run.
Total time to complete Offline 
data collection:         (  645) seconds.
Offline data collection
capabilities:              (0x5b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine 
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      (  44) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   062    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   100   100   040    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0007   253   253   033    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0012   098   098   000    Old_age   Always       -       3932
  5 Reallocated_Sector_Ct   0x0033   098   098   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   040    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0012   018   018   000    Old_age   Always       -       36297
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   098   098   000    Old_age   Always       -       3878
191 G-Sense_Error_Rate      0x000a   099   099   000    Old_age   Always       -       131073
192 Power-Off_Retract_Count 0x0032   098   098   000    Old_age   Always       -       522
193 Load_Cycle_Count        0x0012   001   001   000    Old_age   Always       -       1595969
194 Temperature_Celsius     0x0002   114   114   000    Old_age   Always       -       48 (Min/Max -9/61)
196 Reallocated_Event_Count 0x0032   095   095   000    Old_age   Always       -       651
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   253   000    Old_age   Always       -       0
223 Load_Retry_Count        0x000a   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 5
    CR = Command Register [HEX]
    FR = Features Register [HEX]
    SC = Sector Count Register [HEX]
    SN = Sector Number Register [HEX]
    CL = Cylinder Low Register [HEX]
    CH = Cylinder High Register [HEX]
    DH = Device/Head Register [HEX]
    DC = Device Command Register [HEX]
    ER = Error register [HEX]
    ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 5 occurred at disk power-on lifetime: 35617 hours (1484 days + 1 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 27 d1 4b 84 e4  Error: UNC 39 sectors at LBA = 0x04844bd1 = 75779025

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 f0 08 4b 84 e4 08      00:00:29.600  READ DMA
  c8 00 08 00 4b 84 e4 08      00:00:29.600  READ DMA
  c8 00 08 f8 4a 84 e4 08      00:00:29.600  READ DMA
  c8 00 f0 08 4a 84 e4 08      00:00:29.600  READ DMA
  c8 00 08 00 4a 84 e4 08      00:00:29.600  READ DMA

Error 4 occurred at disk power-on lifetime: 1719 hours (71 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 05 2d 2c 9a e1  Error: UNC 5 sectors at LBA = 0x019a2c2d = 26881069

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 2a 2c 9a e1 00      00:00:58.700  READ DMA
  c8 00 08 2a 2c 9a e1 00      00:00:54.700  READ DMA
  c8 00 08 2a 2c 9a e1 00      00:00:50.800  READ DMA
  c8 00 08 2a 2c 9a e1 00      00:00:46.600  READ DMA
  c8 00 08 22 01 5c e2 00      00:00:46.600  READ DMA

Error 3 occurred at disk power-on lifetime: 1719 hours (71 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 05 2d 2c 9a e1  Error: UNC 5 sectors at LBA = 0x019a2c2d = 26881069

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 2a 2c 9a e1 00      00:00:54.700  READ DMA
  c8 00 08 2a 2c 9a e1 00      00:00:50.800  READ DMA
  c8 00 08 2a 2c 9a e1 00      00:00:46.600  READ DMA
  c8 00 08 22 01 5c e2 00      00:00:46.600  READ DMA
  c8 00 08 42 2c 9a e1 00      00:00:46.600  READ DMA

Error 2 occurred at disk power-on lifetime: 1719 hours (71 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 05 2d 2c 9a e1  Error: UNC 5 sectors at LBA = 0x019a2c2d = 26881069

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 2a 2c 9a e1 00      00:00:50.800  READ DMA
  c8 00 08 2a 2c 9a e1 00      00:00:46.600  READ DMA
  c8 00 08 22 01 5c e2 00      00:00:46.600  READ DMA
  c8 00 08 42 2c 9a e1 00      00:00:46.600  READ DMA
  c8 00 08 a2 2b 9a e1 00      00:00:46.600  READ DMA

Error 1 occurred at disk power-on lifetime: 1719 hours (71 days + 15 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 05 2d 2c 9a e1  Error: UNC 5 sectors at LBA = 0x019a2c2d = 26881069

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 2a 2c 9a e1 00      00:00:46.600  READ DMA
  c8 00 08 22 01 5c e2 00      00:00:46.600  READ DMA
  c8 00 08 42 2c 9a e1 00      00:00:46.600  READ DMA
  c8 00 08 a2 2b 9a e1 00      00:00:46.600  READ DMA
  c8 00 08 92 fe 5b e2 00      00:00:46.600  READ DMA

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%     26552         -
# 2  Short offline       Completed without error       00%     26552         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

root@irin:/home/michal#

Offline

 

#5  2016-08-04 20:41:50

  lis6502 - Łowca lamerów

lis6502
Łowca lamerów
Skąd: Stalinogród
Zarejestrowany: 2008-12-04

Re: Wolny system a test dysku

G-Sense_Error_Rate      0x000a   099   099   000    Old_age   Always       -       131073[/quote]
trośku dużo.

196 Reallocated_Event_Count 0x0032   095   095   000    Old_age   Always       -       651[/quote]

After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  — -- — -- — -- --
  40 51 27 d1 4b 84 e4  Error: UNC 39 sectors at LBA = 0x04844bd1 = 75779025[/quote]
Dysk możesz wysłać do Koszalina.

Offline

 

#6  2016-08-04 23:03:28

  morfik - Cenzor wirtualnego świata

morfik
Cenzor wirtualnego świata
Skąd: ze WSI
Zarejestrowany: 2011-09-15
Serwis

Re: Wolny system a test dysku

Ten dysk zdycha, na całą masę relokowanych sektorów, no i Load_Cycle_Count 1.595.969 -- to już kres żywotności. Nie wiem czy jest sens go ratować. xD

Offline

 

 

Strony: 1

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Nas ludzie lubią po prostu, a nie klikając w przyciski ;-)

[ Generated in 0.010 seconds, 11 queries executed ]

Informacje debugowania

Time (s) Query
0.00021 SET CHARSET latin2
0.00007 SET NAMES latin2
0.00120 SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.119.137.175' WHERE u.id=1
0.00086 REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '18.119.137.175', 1732270015)
0.00063 SELECT * FROM punbb_online WHERE logged<1732269715
0.00076 SELECT topic_id FROM punbb_posts WHERE id=303821
0.00144 SELECT id FROM punbb_posts WHERE topic_id=28835 ORDER BY posted
0.00075 SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=28835 AND t.moved_to IS NULL
0.00007 SELECT search_for, replace_with FROM punbb_censoring
0.00137 SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=28835 ORDER BY p.id LIMIT 0,25
0.00091 UPDATE punbb_topics SET num_views=num_views+1 WHERE id=28835
Total query time: 0.00827 s