Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
Ostatnio wpadlem na pomysl aby zainstalowac sterowniki nvidii do mojej Karty GT540M.
Pierwsza istalacja zrobilem "na czuja" i zakonczyla sie klapa. Zamiast systemu ladowal sie szary ekran z napisem ze cos poszlo nie tak.
Udalo mi sie cofnac ta instalacje i powrocic do stanu pierwotnego.
Druga instalacje podjalem sie zgodnie z tutorialem ze strony debiana. Pomimo ze istalacja wygladala wiele bardziej profesjnalnie to efekt byl Taki sam jak poprzedniej. Tym razem nie udalo mi sie odwrocic instalacji.
Potem skorzystalem z kilku tutoriali jak przywrocic nouveau do pierwotnej konfiguracji.
Skracajac historie, System laduje mi sie do tty1, startx jest nierozpoznawalne (srodowisko gnome).
Czy jest jakas szansa na odzyskanie systemu ? Czy da da rade zrobic taka reinstalacje debiana aby nie nadpisywal dostepnej konfiguracji ?
Offline
Posprzątaj po starej instalacji. Nie napisałeś jaki Debian, jak jessie to z backports sterownik 367.44
Sterowniki instaluj według tego :
[url]https://wiki.debian.org/NvidiaGraphicsDrivers[/url]
Dla twojej karty to :
[url]https://wiki.debian.org/NvidiaGraphicsDrivers#Version_367.44_.28via_jessie-backports.29[/url]
Nie zapomnij zrobić tego:
[url]https://wiki.debian.org/NvidiaGraphicsDrivers#Manual[/url]
A jeszcze to
System laduje mi sie do tty1...[/quote]
, czyli system działa. Robisz to wszystko w terminalu doinstaluj sobie może edytor nano będzie ci łatwiej niż w vi. Na przykład dodawanie repozytoriów jessie-backports.Kod:
nano /etc/apt/sources.listPo dodaniu wpisu nie zapomnij zaktualizować:
Kod:
apt-get updateOstatnio edytowany przez jawojx (2016-11-14 11:21:34)
Offline
Na wstepie uzywam Jessiego na kernelu 3.16, backporty sobie dorzucilem do repo.
Problem polega na tym iz to:
Sterowniki instaluj według tego :
https://wiki.debian.org/NvidiaGraphicsDrivers[/quote]
oraz to:Dla twojej karty to :
https://wiki.debian.org/NvidiaGraphicsDrivers#Versi … -backports.29[/quote]
doprowadzilo mnie do sytuacji w ktorej jestem :/
..ale chyba przeoczylem konfiguracje, zaraz sprawdze.
.. i nic ponowna instalacja sterownikow wiesza TTy, konfiguracja z ostatniego punktu nic tu nie zmienia :/Ostatnio edytowany przez goolash (2016-11-14 12:00:11)
Offline
Ja mam te sterowniki na jajku 4.8 aptosid w Jessie. Chce zobaczyć :
dkms status
cat /etc/X11/xorg.conf.d/20-nvidia.conf
cat /etc/X11/xorg.conf
dpkg -l | grep nvidia
dmesg | grep nvidia
cat /var/log/nvidia-installer.log
startx jest nierozpoznawalne[/quote]
Kod:
dpkg -l | grep xinitOstatnio edytowany przez jawojx (2016-11-14 12:44:23)
Offline
jest lipa, bo po zaisnstalowaniu sterowników Nvidii wiesza mi sie TTy.
wszedłem z GRUBa do recovery mode i podaje wyniki *choc wydaje mi sie ze nie jest to miarodajne
dkms status
nvidia-current, 367.44, 4.7.0-0.bpo.1-amd64, x86_64: installed nvidia-legacy-340xx, 340.96, 3.16.0-4-amd64, x86_64: installed nvidia-legacy-340xx, 340.96, 4.7.0-0.bpo.1-amd64, x86_64: installed
cat /etc/X11/xorg.conf.d/20-nvidia.conf
Section "Device" Identifier "My GPU" Driver "nvidia" EndSection
cat /etc/X11/xorg.conf
Brak
dpkg -l | grep nvidia
ii glx-alternative-nvidia 0.7.3~bpo8+1 amd64 allows the selection of NVIDIA as GLX provider ii libegl-nvidia0:amd64 367.44-3~bpo8+1 amd64 NVIDIA binary EGL library ii libegl-nvidia0:i386 367.44-3~bpo8+1 i386 NVIDIA binary EGL library ii libegl1-glvnd-nvidia:amd64 367.44-3~bpo8+1 amd64 NVIDIA binary EGL GLVND stub library ii libegl1-glvnd-nvidia:i386 367.44-3~bpo8+1 i386 NVIDIA binary EGL GLVND stub library ii libegl1-nvidia-legacy-340xx:amd64 340.96-9~bpo8+2 amd64 NVIDIA binary EGL library (340xx legacy version) ii libegl1-nvidia-legacy-340xx:i386 340.96-9~bpo8+2 i386 NVIDIA binary EGL library (340xx legacy version) ii libgl1-glvnd-nvidia-glx:amd64 367.44-3~bpo8+1 amd64 NVIDIA binary OpenGL/GLX GLVND stub library ii libgl1-glvnd-nvidia-glx:i386 367.44-3~bpo8+1 i386 NVIDIA binary OpenGL/GLX GLVND stub library rc libgl1-nvidia-glx:i386 340.96-1 i386 NVIDIA binary OpenGL libraries ii libgl1-nvidia-legacy-340xx-glx:amd64 340.96-9~bpo8+2 amd64 NVIDIA binary OpenGL/GLX libraries (340xx legacy version) ii libgl1-nvidia-legacy-340xx-glx:i386 340.96-9~bpo8+2 i386 NVIDIA binary OpenGL/GLX libraries (340xx legacy version) ii libgldispatch0-nvidia:amd64 367.44-3~bpo8+1 amd64 Vendor neutral GL dispatch library -- libGLdispatch ii libgldispatch0-nvidia:i386 367.44-3~bpo8+1 i386 Vendor neutral GL dispatch library -- libGLdispatch ii libgles-nvidia1:amd64 367.44-3~bpo8+1 amd64 NVIDIA binary OpenGL|ES 1.x library ii libgles-nvidia1:i386 367.44-3~bpo8+1 i386 NVIDIA binary OpenGL|ES 1.x library ii libgles-nvidia2:amd64 367.44-3~bpo8+1 amd64 NVIDIA binary OpenGL|ES 2.x library ii libgles-nvidia2:i386 367.44-3~bpo8+1 i386 NVIDIA binary OpenGL|ES 2.x library ii libgles1-glvnd-nvidia:amd64 367.44-3~bpo8+1 amd64 NVIDIA binary OpenGL|ES 1.x GLVND stub library ii libgles1-glvnd-nvidia:i386 367.44-3~bpo8+1 i386 NVIDIA binary OpenGL|ES 1.x GLVND stub library ii libgles1-nvidia-legacy-340xx:amd64 340.96-9~bpo8+2 amd64 NVIDIA binary OpenGL|ES 1.x library (340xx legacy version) ii libgles1-nvidia-legacy-340xx:i386 340.96-9~bpo8+2 i386 NVIDIA binary OpenGL|ES 1.x library (340xx legacy version) ii libgles2-glvnd-nvidia:amd64 367.44-3~bpo8+1 amd64 NVIDIA binary OpenGL|ES 2.x GLVND stub library ii libgles2-glvnd-nvidia:i386 367.44-3~bpo8+1 i386 NVIDIA binary OpenGL|ES 2.x GLVND stub library ii libgles2-nvidia-legacy-340xx:amd64 340.96-9~bpo8+2 amd64 NVIDIA binary OpenGL|ES 2.x library (340xx legacy version) ii libgles2-nvidia-legacy-340xx:i386 340.96-9~bpo8+2 i386 NVIDIA binary OpenGL|ES 2.x library (340xx legacy version) ii libglx-nvidia0:amd64 367.44-3~bpo8+1 amd64 NVIDIA binary GLX library ii libglx-nvidia0:i386 367.44-3~bpo8+1 i386 NVIDIA binary GLX library ii libglx0-glvnd-nvidia:amd64 367.44-3~bpo8+1 amd64 Vendor neutral GL dispatch library -- libGLX ii libglx0-glvnd-nvidia:i386 367.44-3~bpo8+1 i386 Vendor neutral GL dispatch library -- libGLX ii libnvidia-cfg1:amd64 367.44-3~bpo8+1 amd64 NVIDIA binary OpenGL/GLX configuration library ii libnvidia-cfg1:i386 367.44-3~bpo8+1 i386 NVIDIA binary OpenGL/GLX configuration library ii libnvidia-eglcore:amd64 367.44-3~bpo8+1 amd64 NVIDIA binary EGL core libraries ii libnvidia-eglcore:i386 367.44-3~bpo8+1 i386 NVIDIA binary EGL core libraries ii libnvidia-glcore:amd64 367.44-3~bpo8+1 amd64 NVIDIA binary OpenGL/GLX core libraries ii libnvidia-glcore:i386 367.44-3~bpo8+1 i386 NVIDIA binary OpenGL/GLX core libraries ii libnvidia-legacy-340xx-cfg1:amd64 340.96-9~bpo8+2 amd64 NVIDIA binary OpenGL/GLX configuration library (340xx legacy version) ii libnvidia-legacy-340xx-cfg1:i386 340.96-9~bpo8+2 i386 NVIDIA binary OpenGL/GLX configuration library (340xx legacy version) ii libnvidia-legacy-340xx-eglcore:amd64 340.96-9~bpo8+2 amd64 NVIDIA binary EGL core libraries (340xx legacy version) ii libnvidia-legacy-340xx-eglcore:i386 340.96-9~bpo8+2 i386 NVIDIA binary EGL core libraries (340xx legacy version) ii libnvidia-legacy-340xx-glcore:amd64 340.96-9~bpo8+2 amd64 NVIDIA binary OpenGL/GLX core libraries (340xx legacy version) ii libnvidia-legacy-340xx-glcore:i386 340.96-9~bpo8+2 i386 NVIDIA binary OpenGL/GLX core libraries (340xx legacy version) ii libnvidia-legacy-340xx-ml1:amd64 340.96-9~bpo8+2 amd64 NVIDIA Management Library (NVML) runtime library ii libnvidia-ml1:amd64 367.44-3~bpo8+1 amd64 NVIDIA Management Library (NVML) runtime library ii libopengl0-glvnd-nvidia:amd64 367.44-3~bpo8+1 amd64 Vendor neutral GL dispatch library -- libOpenGL ii libopengl0-glvnd-nvidia:i386 367.44-3~bpo8+1 i386 Vendor neutral GL dispatch library -- libOpenGL ii nvidia-alternative 367.44-3~bpo8+1 amd64 allows the selection of NVIDIA as GLX provider ii nvidia-driver 367.44-3~bpo8+1 amd64 NVIDIA metapackage ii nvidia-driver-bin 367.44-3~bpo8+1 amd64 NVIDIA driver support binaries ii nvidia-driver-libs:amd64 367.44-3~bpo8+1 amd64 NVIDIA metapackage (OpenGL/GLX/EGL/GLES libraries) ii nvidia-driver-libs:i386 367.44-3~bpo8+1 i386 NVIDIA metapackage (OpenGL/GLX/EGL/GLES libraries) ii nvidia-driver-libs-i386 367.44-3~bpo8+1 i386 NVIDIA metapackage (OpenGL/GLX/EGL/GLES 32-bit libraries) ii nvidia-installer-cleanup 20151021+1~bpo8+1 amd64 cleanup after driver installation with the nvidia-installer ii nvidia-kernel-common 20151021+1~bpo8+1 amd64 NVIDIA binary kernel module support files ii nvidia-kernel-dkms 367.44-3~bpo8+1 amd64 NVIDIA binary kernel module DKMS source ii nvidia-kernel-support 367.44-3~bpo8+1 amd64 NVIDIA binary kernel module support files ii nvidia-legacy-340xx-alternative 340.96-9~bpo8+2 amd64 allows the selection of NVIDIA as GLX provider ii nvidia-legacy-340xx-driver 340.96-9~bpo8+2 amd64 NVIDIA metapackage (340xx legacy version) ii nvidia-legacy-340xx-driver-bin 340.96-9~bpo8+2 amd64 NVIDIA driver support binaries (340xx legacy version) ii nvidia-legacy-340xx-driver-libs:amd64 340.96-9~bpo8+2 amd64 NVIDIA metapackage (OpenGL/GLX/EGL/GLES libraries) (340xx legacy version) ii nvidia-legacy-340xx-driver-libs:i386 340.96-9~bpo8+2 i386 NVIDIA metapackage (OpenGL/GLX/EGL/GLES libraries) (340xx legacy version) ii nvidia-legacy-340xx-driver-libs-i386 340.96-9~bpo8+2 i386 NVIDIA metapackage (OpenGL/GLX/EGL/GLES 32-bit libraries) (340xx legacy version) ii nvidia-legacy-340xx-kernel-dkms 340.96-9~bpo8+2 amd64 NVIDIA binary kernel module DKMS source (340xx legacy version) ii nvidia-legacy-340xx-kernel-support 340.96-9~bpo8+2 amd64 NVIDIA binary kernel module support files (340xx legacy version) ii nvidia-legacy-340xx-vdpau-driver:amd64 340.96-9~bpo8+2 amd64 Video Decode and Presentation API for Unix - NVIDIA driver ii nvidia-legacy-check 367.44-3~bpo8+1 amd64 check for NVIDIA GPUs requiring a legacy driver ii nvidia-modprobe 358.09-1~bpo8+1 amd64 utility to load NVIDIA kernel modules and create device nodes ii nvidia-persistenced 358.09-1~bpo8+1 amd64 daemon to maintain persistent software state in the NVIDIA driver ii nvidia-settings-legacy-340xx 340.98-1~bpo8+1 amd64 tool for configuring the NVIDIA graphics driver (340xx legacy version) ii nvidia-support 20151021+1~bpo8+1 amd64 NVIDIA binary graphics driver support files ii nvidia-vdpau-driver:amd64 367.44-3~bpo8+1 amd64 Video Decode and Presentation API for Unix - NVIDIA driver ii nvidia-vulkan-common 367.44-3~bpo8+1 amd64 NVIDIA Vulkan driver - common files ii nvidia-vulkan-icd:amd64 367.44-3~bpo8+1 amd64 NVIDIA Vulkan installable client driver (ICD) ii nvidia-vulkan-icd:i386 367.44-3~bpo8+1 i386 NVIDIA Vulkan installable client driver (ICD) ii nvidia-xconfig 340.46-1 amd64 X configuration tool for non-free NVIDIA drivers ii xserver-xorg-video-nvidia 367.44-3~bpo8+1 amd64 NVIDIA binary Xorg driver ii xserver-xorg-video-nvidia-legacy-340xx 340.96-9~bpo8+2 amd64 NVIDIA binary Xorg driver (340xx legacy version)
dmesg | grep nvidia
[ 4.983613] nvidia: module license 'NVIDIA' taints kernel. [ 4.994764] nvidia: module verification failed: signature and/or required key missing - tainting kernel [ 5.038872] nvidia 0000:01:00.0: enabling device (0000 -> 0003) [ 5.039613] nvidia-nvlink: Nvlink Core is being initialized, major device number 249 [ 5.046978] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 367.44 Wed Aug 17 21:54:40 PDT 2016 [ 5.141714] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
cat /var/log/nvidia-installer.log
Brak
dpkg -l | grep xinit
rc xinit 1.3.4-1 amd64 X server initialisation tool
Ostatnio edytowany przez goolash (2016-11-14 13:53:26)
Offline
No masz tu burdello, ma być jeden sterownik 367.44 , wyczyść instalacje:
apt-get remove nvidia-*
i odnowa zgodnie z opisem.
Ostatnio edytowany przez jawojx (2016-11-14 13:51:51)
Offline
Lepiej
apt-get purge nvidia-*
Offline
ech .. spróbuje po raz ostatni i czyszczę system. za wielki bajzel sie zrobił :/
Offline
[quote=jawojx]Posprzątaj po starej instalacji. Nie napisałeś jaki Debian, jak jessie to z backports sterownik 367.44
Sterowniki instaluj według tego :
[url]https://wiki.debian.org/NvidiaGraphicsDrivers[/url]
Dla twojej karty to :
[url]https://wiki.debian.org/NvidiaGraphicsDrivers#Version_367.44_.28via_jessie-backports.29[/url]
Nie zapomnij zrobić tego:
[url]https://wiki.debian.org/NvidiaGraphicsDrivers#Manual[/url]
A jeszcze to
System laduje mi sie do tty1...[/quote]
, czyli system działa. Robisz to wszystko w terminalu doinstaluj sobie może edytor nano będzie ci łatwiej niż w vi. Na przykład dodawanie repozytoriów jessie-backports.Kod:
nano /etc/apt/sources.listPo dodaniu wpisu nie zapomnij zaktualizować:
Kod:
apt-get update[/quote]
-----------------
Witam
Mój sprzęt:
Laptop Asus R540L
i3 5005U 2 GHz
3D GPU Nvidia GK 208 M - Geforce 920 M - VendorID 10de :1299 -> Subsystem 17aa 36af
Wszystko sie zepsuło gdy po instalacji Wine i Eve Online.
Zabrałem się za instalację wszystkiego z twojego postu wyżej - X padł i juz nie wstał.
Jak to poprawnie skofigurować?
w/w sposób nie działa
Offline
O ile się dobrze orientuję i3 ma swoją grafikę Intela.
Offline
Nie działa bo to wątek o jednej karcie graficznej, nie dla ciebie. Jak pisze Bodzio ty pewnie masz jeszcze grafikę intela, czyli jakiegoś nvidia optimus. Sprawdź:
lspci | grep VGA
Właściwy wątek dla ciebie to ten od wpisu numer 8.
https://forum.dug.net.pl/viewtopic.php?pid=308808#p308808
Powinno wystarczyć opis instalacji bumblebee-nvidia primus.
Offline
Hej,
od niedawna mam Lenovo W520 z GPU nvidii i intela na pokładzie.
przy instalacji też miałem problemy z wstaniem systemu, bo nie wiedziałem, że jest optimus i trzeba coś z tym zrobić.
pomogło ustawienie w Biosie korzystanie tylko z jednej karty - ja wybrałem intela i teraz wszystko chodzi.
EDIT:
konkretnie w Biosie mam tak:
BIOS -> Config ->Display -> Graphics Device -> Integrated Graphics
Do wyboru oprócz Integrated Graphics jest też Discrete Graphics i NVIDIA Optimus (z nich właśnie nie korzystam)
Ostatnio edytowany przez Lacer (2017-02-21 17:43:41)
Offline
[quote=Lacer]Hej,
od niedawna mam Lenovo W520 z GPU nvidii i intela na pokładzie.
przy instalacji też miałem problemy z wstaniem systemu, bo nie wiedziałem, że jest optimus i trzeba coś z tym zrobić.
pomogło ustawienie w Biosie korzystanie tylko z jednej karty - ja wybrałem intela i teraz wszystko chodzi.
EDIT:
konkretnie w Biosie mam tak:
BIOS -> Config ->Display -> Graphics Device -> Integrated Graphics
Do wyboru oprócz Integrated Graphics jest też Discrete Graphics i NVIDIA Optimus (z nich właśnie nie korzystam)[/quote]
---------------------------
No tak, tylko ze ja w tym moim Asus - nie mam takiej opcji w bios.
A od 16.02. sie z tym tematem zmagam.
Generalnie chce zatem miec opcje korzystania przy pracy biurowej z intel graphisc HD a przy odpaleniu EvE Online z 3D gpu - dla tego konkretnego laptopa
Przenalizowalem linki od javoox
1 zainstalowalem swiezy system jeszcze raz
2 przeczytalem te linki + staralem sie wykonac wg instrukcji
3 mam juz zainstalowane [b]bumblebee[/b] - i po reboot przynajmniej system X wstaje + widze w menu Activities ikone programu [b]nVidiaXserver Settings][/b]
tylko co z tego jezeli w [url]https://wiki.debian.org/NvidiaGraphicsDrivers/Optimus#Configure_LightDM[/url] - w sekcji dotyczacej [b]Dynamic Graphics with Bumblebee [/b] ta sekcja jest niedokonczona
4 staralem sie dobrze zweryfikowac swoj sprzet w celu ustalenia jaka wersja driverow jaka bedzie potrzebna. dodalem odpowiednie wpisy do repozytoriow itp w [b] /etc/apt/source.list[/b]
uname -a
Debian 8.4 Jessie uname -a Linux szelu 3.16.0-4-amd64 #1 SMP Debian 3.16.39-1 (2016-12-30) x86_64 GNU/Linux
lspci -v — [b]przed instalacja bumblebee i Optimus prime [/b]
... 00:02.0 VGA compatible controller: Intel Corporation Broadwell-U Integrated Graphics (rev 09) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 10d0 Flags: bus master, fast devsel, latency 0, IRQ 66 Memory at 99000000 (64-bit, non-prefetchable) [size=16M] Memory at a0000000 (64-bit, prefetchable) [size=256M] I/O ports at 5000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 ... 04:00.0 3D controller: NVIDIA Corporation Device 1299 (rev a1) Subsystem: ASUSTeK Computer Inc. Device 105e Flags: fast devsel, IRQ 16 Memory at 9a000000 (32-bit, non-prefetchable) [size=16M] Memory at b0000000 (64-bit, prefetchable) [size=256M] Memory at c0000000 (64-bit, prefetchable) [size=32M] I/O ports at 3000 [size=128] Expansion ROM at 9b000000 [disabled] [size=512K] Capabilities: <access denied>
lspci -vv -> [b]przed instalacja bumblebee i Optimus prime [/b]
... 00:02.0 VGA compatible controller: Intel Corporation Broadwell-U Integrated Graphics (rev 09) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 10d0 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 66 Region 0: Memory at 99000000 (64-bit, non-prefetchable) [size=16M] Region 2: Memory at a0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 5000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 ... 04:00.0 3D controller: NVIDIA Corporation Device 1299 (rev a1) Subsystem: ASUSTeK Computer Inc. Device 105e Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 16 Region 0: Memory at 9a000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at b0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at c0000000 (64-bit, prefetchable) [size=32M] Region 5: I/O ports at 3000 [size=128] Expansion ROM at 9b000000 [disabled] [size=512K] Capabilities: <access denied>
$ sudo hwinfo --short -> [b]przed instalacja bumblebee i Optimus prime [/b]
> pppoe.2: discovery > int.7: hdb cpu: Intel(R) Core(TM) i3-5005U CPU @ 2.00GHz, 2000 MHz Intel(R) Core(TM) i3-5005U CPU @ 2.00GHz, 1997 MHz Intel(R) Core(TM) i3-5005U CPU @ 2.00GHz, 2000 MHz Intel(R) Core(TM) i3-5005U CPU @ 2.00GHz, 1959 MHz keyboard: /dev/input/event3 AT Translated Set 2 keyboard mouse: Logitech USB Laser Mouse /dev/input/mice ELAN1000:00 04F3:0401 graphics card: Intel VGA compatible controller nVidia 3D controller sound: Intel Audio device Intel Audio device storage: Intel SATA controller network: eth0 Realtek RTL8101E/RTL8102E PCI Express Fast Ethernet controller wlan0 Atheros AR9565 Wireless Network Adapter network interface: eth0 Ethernet network interface lo Loopback network interface wlan0 WLAN network interface disk: /dev/sda TOSHIBA MQ01ABD1 partition: /dev/sda1 Partition /dev/sda2 Partition /dev/sda5 Partition /dev/sda6 Partition /dev/sda7 Partition /dev/sda8 Partition cdrom: /dev/sr0 Slimtype DVD A DA8A6SH usb controller: Intel USB Controller bios: BIOS bridge: Intel Host bridge Intel PCI bridge Intel PCI bridge Intel PCI bridge Intel PCI bridge Intel ISA bridge hub: Linux 3.16.0-4-amd64 xhci_hcd xHCI Host Controller Linux 3.16.0-4-amd64 xhci_hcd xHCI Host Controller memory: Main Memory bluetooth: IMC Networks Bluetooth Device unknown: FPU DMA controller PIC Timer Keyboard controller PS/2 Controller Intel Signal processing controller Intel Communication controller Intel SMBus Intel Signal processing controller Realtek Unclassified device /dev/input/event14 Chicony Electronics USB2.0 VGA UVC WebCam
$ sudo hwinfo --gfxcard
09: PCI 02.0: 0300 VGA compatible controller (VGA) [Created at pci.328] Unique ID: _Znp.5sWnSVYzWx8 SysFS ID: /devices/pci0000:00/0000:00:02.0 SysFS BusID: 0000:00:02.0 Hardware Class: graphics card Model: "Intel VGA compatible controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x1616 SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x10d0 Revision: 0x09 Driver: "i915" Driver Modules: "drm" Memory Range: 0x99000000-0x99ffffff (rw,non-prefetchable) Memory Range: 0xa0000000-0xafffffff (ro,non-prefetchable) I/O Ports: 0x5000-0x503f (rw) IRQ: 66 (418 events) I/O Ports: 0x3c0-0x3df (rw) Module Alias: "pci:v00008086d00001616sv00001043sd000010D0bc03sc00i00" Driver Info #0: Driver Status: i915 is active Driver Activation Cmd: "modprobe i915" Config Status: cfg=new, avail=yes, need=no, active=unknown 26: PCI 400.0: 0302 3D controller [Created at pci.328] Unique ID: YmUS.KF92GZLWj7F Parent ID: QSNP.UUogohTnewC SysFS ID: /devices/pci0000:00/0000:00:1c.4/0000:04:00.0 SysFS BusID: 0000:04:00.0 Hardware Class: graphics card Model: "nVidia 3D controller" Vendor: pci 0x10de "nVidia Corporation" Device: pci 0x1299 SubVendor: pci 0x1043 "ASUSTeK Computer Inc." SubDevice: pci 0x105e Revision: 0xa1 Memory Range: 0x9a000000-0x9affffff (rw,non-prefetchable) Memory Range: 0xb0000000-0xbfffffff (ro,non-prefetchable) Memory Range: 0xc0000000-0xc1ffffff (ro,non-prefetchable) I/O Ports: 0x3000-0x3fff (rw) Memory Range: 0x9b000000-0x9b07ffff (ro,non-prefetchable,disabled) IRQ: 16 (no events) Module Alias: "pci:v000010DEd00001299sv00001043sd0000105Ebc03sc02i00" Driver Info #0: Driver Status: nouveau is active Driver Activation Cmd: "modprobe nouveau" Config Status: cfg=new, avail=yes, need=no, active=unknown Attached to: #18 (PCI bridge) Primary display adapter: #9
------------
Tak u mnie wyglada log Xorg.0.log po swierzej instalacji tej wersji debian i jeszcze przed bumblebee i Optimus Prime
Na tym etapie wszystko jest domyslne - nie ma jeszcze wygenerowanego xorg.conf itp w roznych odpowiednich folderach - bo jeszcze nie podejmowalem akcji
ktore poprzednio wykonywane sprawialy ze wogole X system mi padal i nie wstawal
[ 14.096] X.Org X Server 1.16.4 Release Date: 2014-12-20 [ 14.096] X Protocol Version 11, Revision 0 [ 14.096] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian [ 14.096] Current Operating System: Linux szeluComp 3.16.0-4-amd64 #1 SMP Debian 3.16.39-1 (2016-12-30) x86_64 [ 14.096] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=66cf5c82-a97c-4d5d-b5ed-f4713d32e040 ro initrd=/install/initrd.gz quiet [ 14.096] Build Date: 11 February 2015 12:32:02AM [ 14.096] xorg-server 2:1.16.4-1 (http://www.debian.org/support) [ 14.096] Current version of pixman: 0.32.6 [ 14.096] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 14.096] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 14.096] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 22 00:26:52 2017 [ 14.158] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 14.216] (==) No Layout section. Using the first Screen section. [ 14.216] (==) No screen section available. Using defaults. [ 14.216] (**) |-->Screen "Default Screen Section" (0) [ 14.216] (**) | |-->Monitor "<default monitor>" [ 14.254] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 14.254] (==) Automatically adding devices [ 14.254] (==) Automatically enabling devices [ 14.254] (==) Automatically adding GPU devices [ 14.284] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 14.284] Entry deleted from font path. [ 14.285] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 14.285] (==) ModulePath set to "/usr/lib/xorg/modules" [ 14.285] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 14.296] (II) Loader magic: 0x7f8c4b4a8d80 [ 14.296] (II) Module ABI versions: [ 14.296] X.Org ANSI C Emulation: 0.4 [ 14.296] X.Org Video Driver: 18.0 [ 14.296] X.Org XInput driver : 21.0 [ 14.296] X.Org Server Extension : 8.0 [ 14.296] (II) xfree86: Adding drm device (/dev/dri/card0) [ 14.297] (--) PCI:*(0:0:2:0) 8086:1616:1043:10d0 rev 9, Mem @ 0x99000000/16777216, 0xa0000000/268435456, I/O @ 0x00005000/64 [ 14.297] (--) PCI: (0:4:0:0) 10de:1299:1043:105e rev 161, Mem @ 0x9a000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288 [ 14.330] (II) LoadModule: "glx" [ 14.387] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 14.939] (II) Module glx: vendor="X.Org Foundation" [ 14.939] compiled for 1.16.4, module version = 1.0.0 [ 14.939] ABI class: X.Org Server Extension, version 8.0 [ 14.939] (==) AIGLX enabled [ 14.939] (==) Matched intel as autoconfigured driver 0 [ 14.939] (==) Matched intel as autoconfigured driver 1 [ 14.939] (==) Matched modesetting as autoconfigured driver 2 [ 14.939] (==) Matched fbdev as autoconfigured driver 3 [ 14.939] (==) Matched vesa as autoconfigured driver 4 [ 14.939] (==) Assigned the driver to the xf86ConfigLayout [ 14.939] (II) LoadModule: "intel" [ 14.987] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 15.205] (II) Module intel: vendor="X.Org Foundation" [ 15.205] compiled for 1.15.99.904, module version = 2.21.15 [ 15.205] Module class: X.Org Video Driver [ 15.205] ABI class: X.Org Video Driver, version 18.0 [ 15.205] (II) LoadModule: "modesetting" [ 15.205] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 15.210] (II) Module modesetting: vendor="X.Org Foundation" [ 15.210] compiled for 1.16.4, module version = 0.9.0 [ 15.210] Module class: X.Org Video Driver [ 15.210] ABI class: X.Org Video Driver, version 18.0 [ 15.210] (II) LoadModule: "fbdev" [ 15.210] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 15.219] (II) Module fbdev: vendor="X.Org Foundation" [ 15.219] compiled for 1.15.99.904, module version = 0.4.4 [ 15.219] Module class: X.Org Video Driver [ 15.219] ABI class: X.Org Video Driver, version 18.0 [ 15.219] (II) LoadModule: "vesa" [ 15.219] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 15.219] (II) Module vesa: vendor="X.Org Foundation" [ 15.219] compiled for 1.15.99.904, module version = 2.3.3 [ 15.219] Module class: X.Org Video Driver [ 15.219] ABI class: X.Org Video Driver, version 18.0 [ 15.219] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics, HD Graphics 2000, HD Graphics 3000, HD Graphics 2500, HD Graphics 4000, HD Graphics P4000, HD Graphics 4600, HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100, HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200 [ 15.228] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 15.228] (II) FBDEV: driver for framebuffer: fbdev [ 15.228] (II) VESA: driver for VESA chipsets: vesa [ 15.228] (++) using VT number 7 [ 15.237] (WW) Falling back to old probe method for modesetting [ 15.237] (WW) Falling back to old probe method for fbdev [ 15.237] (II) Loading sub module "fbdevhw" [ 15.237] (II) LoadModule: "fbdevhw" [ 15.237] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 15.246] (II) Module fbdevhw: vendor="X.Org Foundation" [ 15.246] compiled for 1.16.4, module version = 0.0.2 [ 15.246] ABI class: X.Org Video Driver, version 18.0 [ 15.246] (WW) Falling back to old probe method for vesa [ 15.246] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 15.246] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 15.246] (==) intel(0): RGB weight 888 [ 15.246] (==) intel(0): Default visual is TrueColor [ 15.246] (WW) intel(0): Unknown chipset [ 15.246] (**) intel(0): Relaxed fencing disabled [ 15.246] (**) intel(0): Wait on SwapBuffers? enabled [ 15.246] (**) intel(0): Triple buffering? enabled [ 15.246] (**) intel(0): Framebuffer linear [ 15.246] (**) intel(0): Pixmaps tiled [ 15.246] (**) intel(0): 3D buffers tiled [ 15.246] (**) intel(0): SwapBuffers wait enabled [ 15.246] (==) intel(0): video overlay key set to 0x101fe [ 15.246] (II) intel(0): Output eDP1 has no monitor section [ 15.246] (--) intel(0): found backlight control interface /sys/class/backlight/intel_backlight [ 15.246] (II) intel(0): Output DP1 has no monitor section [ 15.247] (II) intel(0): Output HDMI1 has no monitor section [ 15.247] (II) intel(0): EDID for output eDP1 [ 15.247] (II) intel(0): Manufacturer: CMN Model: 15ca Serial#: 0 [ 15.247] (II) intel(0): Year: 2014 Week: 34 [ 15.247] (II) intel(0): EDID Version: 1.4 [ 15.247] (II) intel(0): Digital Display Input [ 15.247] (II) intel(0): 6 bits per channel [ 15.247] (II) intel(0): Digital interface is DisplayPort [ 15.247] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19 [ 15.247] (II) intel(0): Gamma: 2.20 [ 15.247] (II) intel(0): No DPMS capabilities specified [ 15.247] (II) intel(0): Supported color encodings: RGB 4:4:4 [ 15.247] (II) intel(0): First detailed timing is preferred mode [ 15.247] (II) intel(0): Preferred mode is native pixel format and refresh rate [ 15.247] (II) intel(0): redX: 0.569 redY: 0.332 greenX: 0.328 greenY: 0.581 [ 15.247] (II) intel(0): blueX: 0.159 blueY: 0.141 whiteX: 0.313 whiteY: 0.329 [ 15.247] (II) intel(0): Manufacturer's mask: 0 [ 15.247] (II) intel(0): Supported detailed timing: [ 15.247] (II) intel(0): clock: 76.4 MHz Image Size: 344 x 193 mm [ 15.247] (II) intel(0): h_active: 1366 h_sync: 1434 h_sync_end 1479 h_blank_end 1592 h_border: 0 [ 15.247] (II) intel(0): v_active: 768 v_sync: 772 v_sync_end 779 v_blanking: 800 v_border: 0 [ 15.247] (II) intel(0): N156BGE-E42 [ 15.247] (II) intel(0): CMN [ 15.247] (II) intel(0): N156BGE-E42 [ 15.247] (II) intel(0): EDID (in hex): [ 15.247] (II) intel(0): 00ffffffffffff000daeca1500000000 [ 15.247] (II) intel(0): 221801049522137802c3c59155549428 [ 15.247] (II) intel(0): 24505400000001010101010101010101 [ 15.247] (II) intel(0): 010101010101da1d56e250002030442d [ 15.247] (II) intel(0): 470058c110000018000000fe004e3135 [ 15.247] (II) intel(0): 364247452d4534320a20000000fe0043 [ 15.247] (II) intel(0): 4d4e0a202020202020202020000000fe [ 15.247] (II) intel(0): 004e3135364247452d4534320a200055 [ 15.247] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 15.247] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 15.247] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 15.247] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 15.247] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 15.247] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 15.247] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 15.247] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 15.247] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 15.247] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 15.247] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) [ 15.247] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 15.247] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 15.247] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 15.247] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported) [ 15.247] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported) [ 15.247] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 15.247] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 15.247] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) [ 15.247] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) [ 15.247] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 15.247] (II) intel(0): Printing probed modes for output eDP1 [ 15.247] (II) intel(0): Modeline "1366x768"x60.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP) [ 15.247] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d) [ 15.247] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d) [ 15.247] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 15.247] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 15.247] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 15.247] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 15.247] (II) intel(0): EDID for output DP1 [ 15.248] (II) intel(0): EDID for output HDMI1 [ 15.248] (II) intel(0): Output eDP1 connected [ 15.248] (II) intel(0): Output DP1 disconnected [ 15.248] (II) intel(0): Output HDMI1 disconnected [ 15.248] (II) intel(0): Using exact sizes for initial modes [ 15.248] (II) intel(0): Output eDP1 using initial mode 1366x768 [ 15.248] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 15.248] (II) intel(0): Kernel page flipping support detected, enabling [ 15.248] (==) intel(0): DPI set to (96, 96) [ 15.248] (II) Loading sub module "fb" [ 15.248] (II) LoadModule: "fb" [ 15.248] (II) Loading /usr/lib/xorg/modules/libfb.so [ 15.266] (II) Module fb: vendor="X.Org Foundation" [ 15.266] compiled for 1.16.4, module version = 1.0.0 [ 15.266] ABI class: X.Org ANSI C Emulation, version 0.4 [ 15.266] (II) Loading sub module "dri2" [ 15.266] (II) LoadModule: "dri2" [ 15.266] (II) Module "dri2" already built-in [ 15.266] (II) UnloadModule: "modesetting" [ 15.266] (II) Unloading modesetting [ 15.266] (II) UnloadModule: "fbdev" [ 15.266] (II) Unloading fbdev [ 15.266] (II) UnloadSubModule: "fbdevhw" [ 15.266] (II) Unloading fbdevhw [ 15.266] (II) UnloadModule: "vesa" [ 15.266] (II) Unloading vesa [ 15.266] (==) Depth 24 pixmap format is 32 bpp [ 15.266] (WW) intel(0): cannot enable DRI2 whilst forcing software fallbacks [ 15.266] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, untiled [ 15.273] (II) UXA(0): Driver registered support for the following operations: [ 15.273] (II) solid [ 15.274] (II) copy [ 15.274] (II) composite (RENDER acceleration) [ 15.274] (II) put_image [ 15.274] (II) get_image [ 15.274] (==) intel(0): Backing store enabled [ 15.274] (==) intel(0): Silken mouse enabled [ 15.281] (II) intel(0): Initializing HW Cursor [ 15.281] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 15.282] (==) intel(0): DPMS enabled [ 15.282] (==) intel(0): Intel XvMC decoder disabled [ 15.282] (WW) intel(0): Disabling Xv because no adaptors could be initialized. [ 15.282] (II) intel(0): direct rendering: Failed [ 15.282] (==) intel(0): hotplug detection: "enabled" [ 15.296] (--) RandR disabled [ 15.301] (II) SELinux: Disabled on system [ 15.302] (II) AIGLX: Screen 0 is not DRI2 capable [ 15.302] (EE) AIGLX: reverting to software rendering [ 15.912] (II) AIGLX: Loaded and initialized swrast [ 15.912] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 15.912] (II) intel(0): Setting screen physical size to 361 x 203 [ 16.181] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 16.181] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 16.181] (II) LoadModule: "evdev" [ 16.182] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 16.227] (II) Module evdev: vendor="X.Org Foundation" [ 16.228] compiled for 1.16.0, module version = 2.9.0 [ 16.228] Module class: X.Org XInput Driver [ 16.228] ABI class: X.Org XInput driver, version 21.0 [ 16.228] (II) Using input driver 'evdev' for 'Power Button' [ 16.228] (**) Power Button: always reports core events [ 16.228] (**) evdev: Power Button: Device: "/dev/input/event2" [ 16.228] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 16.228] (--) evdev: Power Button: Found keys [ 16.228] (II) evdev: Power Button: Configuring as keyboard [ 16.228] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2" [ 16.228] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 16.228] (**) Option "xkb_rules" "evdev" [ 16.228] (**) Option "xkb_model" "pc105" [ 16.228] (**) Option "xkb_layout" "us" [ 16.228] (II) config/udev: Adding input device Video Bus (/dev/input/event4) [ 16.228] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 16.228] (II) Using input driver 'evdev' for 'Video Bus' [ 16.228] (**) Video Bus: always reports core events [ 16.228] (**) evdev: Video Bus: Device: "/dev/input/event4" [ 16.228] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 16.228] (--) evdev: Video Bus: Found keys [ 16.228] (II) evdev: Video Bus: Configuring as keyboard [ 16.228] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4" [ 16.228] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 16.228] (**) Option "xkb_rules" "evdev" [ 16.228] (**) Option "xkb_model" "pc105" [ 16.228] (**) Option "xkb_layout" "us" [ 16.229] (II) config/udev: Adding input device Video Bus (/dev/input/event5) [ 16.229] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 16.229] (II) Using input driver 'evdev' for 'Video Bus' [ 16.229] (**) Video Bus: always reports core events [ 16.229] (**) evdev: Video Bus: Device: "/dev/input/event5" [ 16.229] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 16.229] (--) evdev: Video Bus: Found keys [ 16.229] (II) evdev: Video Bus: Configuring as keyboard [ 16.229] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/LNXVIDEO:01/input/input5/event5" [ 16.229] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8) [ 16.229] (**) Option "xkb_rules" "evdev" [ 16.229] (**) Option "xkb_model" "pc105" [ 16.229] (**) Option "xkb_layout" "us" [ 16.229] (II) config/udev: Adding input device Lid Switch (/dev/input/event0) [ 16.230] (II) No input driver specified, ignoring this device. [ 16.230] (II) This device may have been added with another device file. [ 16.230] (II) config/udev: Adding input device Sleep Button (/dev/input/event1) [ 16.230] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 16.230] (II) Using input driver 'evdev' for 'Sleep Button' [ 16.230] (**) Sleep Button: always reports core events [ 16.230] (**) evdev: Sleep Button: Device: "/dev/input/event1" [ 16.230] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 16.230] (--) evdev: Sleep Button: Found keys [ 16.230] (II) evdev: Sleep Button: Configuring as keyboard [ 16.230] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event1" [ 16.230] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 16.230] (**) Option "xkb_rules" "evdev" [ 16.230] (**) Option "xkb_model" "pc105" [ 16.230] (**) Option "xkb_layout" "us" [ 16.230] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event10) [ 16.230] (II) No input driver specified, ignoring this device. [ 16.230] (II) This device may have been added with another device file. [ 16.231] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event11) [ 16.231] (II) No input driver specified, ignoring this device. [ 16.231] (II) This device may have been added with another device file. [ 16.231] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event9) [ 16.231] (II) No input driver specified, ignoring this device. [ 16.231] (II) This device may have been added with another device file. [ 16.231] (II) config/udev: Adding input device USB2.0 VGA UVC WebCam (/dev/input/event13) [ 16.231] (**) USB2.0 VGA UVC WebCam: Applying InputClass "evdev keyboard catchall" [ 16.231] (II) Using input driver 'evdev' for 'USB2.0 VGA UVC WebCam' [ 16.231] (**) USB2.0 VGA UVC WebCam: always reports core events [ 16.231] (**) evdev: USB2.0 VGA UVC WebCam: Device: "/dev/input/event13" [ 16.231] (--) evdev: USB2.0 VGA UVC WebCam: Vendor 0x4f2 Product 0xb52b [ 16.231] (--) evdev: USB2.0 VGA UVC WebCam: Found keys [ 16.231] (II) evdev: USB2.0 VGA UVC WebCam: Configuring as keyboard [ 16.231] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input13/event13" [ 16.231] (II) XINPUT: Adding extended input device "USB2.0 VGA UVC WebCam" (type: KEYBOARD, id 10) [ 16.231] (**) Option "xkb_rules" "evdev" [ 16.231] (**) Option "xkb_model" "pc105" [ 16.231] (**) Option "xkb_layout" "us" [ 16.232] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12) [ 16.232] (II) No input driver specified, ignoring this device. [ 16.232] (II) This device may have been added with another device file. [ 16.232] (II) config/udev: Adding input device ELAN1000:00 04F3:0401 (/dev/input/event8) [ 16.232] (**) ELAN1000:00 04F3:0401: Applying InputClass "evdev pointer catchall" [ 16.232] (II) Using input driver 'evdev' for 'ELAN1000:00 04F3:0401' [ 16.232] (**) ELAN1000:00 04F3:0401: always reports core events [ 16.232] (**) evdev: ELAN1000:00 04F3:0401: Device: "/dev/input/event8" [ 16.253] (--) evdev: ELAN1000:00 04F3:0401: Vendor 0x4f3 Product 0x401 [ 16.253] (--) evdev: ELAN1000:00 04F3:0401: Found 3 mouse buttons [ 16.253] (--) evdev: ELAN1000:00 04F3:0401: Found scroll wheel(s) [ 16.253] (--) evdev: ELAN1000:00 04F3:0401: Found relative axes [ 16.253] (--) evdev: ELAN1000:00 04F3:0401: Found x and y relative axes [ 16.253] (II) evdev: ELAN1000:00 04F3:0401: Configuring as mouse [ 16.253] (II) evdev: ELAN1000:00 04F3:0401: Adding scrollwheel support [ 16.253] (**) evdev: ELAN1000:00 04F3:0401: YAxisMapping: buttons 4 and 5 [ 16.253] (**) evdev: ELAN1000:00 04F3:0401: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 16.253] (**) Option "config_info" "udev:/sys/devices/pci0000:00/INT3433:00/i2c-9/i2c-ELAN1000:00/0018:04F3:0401.0001/input/input8/event8" [ 16.253] (II) XINPUT: Adding extended input device "ELAN1000:00 04F3:0401" (type: MOUSE, id 11) [ 16.253] (II) evdev: ELAN1000:00 04F3:0401: initialized for relative axes. [ 16.253] (**) ELAN1000:00 04F3:0401: (accel) keeping acceleration scheme 1 [ 16.253] (**) ELAN1000:00 04F3:0401: (accel) acceleration profile 0 [ 16.253] (**) ELAN1000:00 04F3:0401: (accel) acceleration factor: 2.000 [ 16.253] (**) ELAN1000:00 04F3:0401: (accel) acceleration threshold: 4 [ 16.253] (II) config/udev: Adding input device ELAN1000:00 04F3:0401 (/dev/input/mouse0) [ 16.253] (II) No input driver specified, ignoring this device. [ 16.253] (II) This device may have been added with another device file. [ 16.254] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event7) [ 16.254] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall" [ 16.254] (II) Using input driver 'evdev' for 'Asus WMI hotkeys' [ 16.254] (**) Asus WMI hotkeys: always reports core events [ 16.254] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event7" [ 16.254] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0 [ 16.254] (--) evdev: Asus WMI hotkeys: Found keys [ 16.254] (II) evdev: Asus WMI hotkeys: Configuring as keyboard [ 16.254] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input7/event7" [ 16.254] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 12) [ 16.254] (**) Option "xkb_rules" "evdev" [ 16.254] (**) Option "xkb_model" "pc105" [ 16.254] (**) Option "xkb_layout" "us" [ 16.254] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) [ 16.254] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 16.254] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 16.254] (**) AT Translated Set 2 keyboard: always reports core events [ 16.254] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3" [ 16.254] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 16.254] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 16.254] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 16.254] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event3" [ 16.254] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13) [ 16.254] (**) Option "xkb_rules" "evdev" [ 16.254] (**) Option "xkb_model" "pc105" [ 16.254] (**) Option "xkb_layout" "us" [ 16.255] (II) config/udev: Adding input device PC Speaker (/dev/input/event6) [ 16.255] (II) No input driver specified, ignoring this device. [ 16.255] (II) This device may have been added with another device file. [ 20.701] (II) intel(0): EDID vendor "CMN", prod id 5578 [ 20.701] (II) intel(0): Printing DDC gathered Modelines: [ 20.701] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP) [ 24.560] (II) intel(0): EDID vendor "CMN", prod id 5578 [ 24.560] (II) intel(0): Printing DDC gathered Modelines: [ 24.560] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP) [ 37.587] (II) intel(0): EDID vendor "CMN", prod id 5578 [ 37.587] (II) intel(0): Printing DDC gathered Modelines: [ 37.587] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP) [ 38.955] (II) intel(0): EDID vendor "CMN", prod id 5578 [ 38.955] (II) intel(0): Printing DDC gathered Modelines: [ 38.955] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP) [ 899.180] (II) intel(0): EDID vendor "CMN", prod id 5578 [ 899.180] (II) intel(0): Printing DDC gathered Modelines: [ 899.180] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP) [ 1522.058] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/mouse1) [ 1522.058] (II) No input driver specified, ignoring this device. [ 1522.058] (II) This device may have been added with another device file. [ 1522.058] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/event14) [ 1522.058] (**) Logitech USB Laser Mouse: Applying InputClass "evdev pointer catchall" [ 1522.058] (II) Using input driver 'evdev' for 'Logitech USB Laser Mouse' [ 1522.058] (**) Logitech USB Laser Mouse: always reports core events [ 1522.058] (**) evdev: Logitech USB Laser Mouse: Device: "/dev/input/event14" [ 1522.058] (--) evdev: Logitech USB Laser Mouse: Vendor 0x46d Product 0xc052 [ 1522.058] (--) evdev: Logitech USB Laser Mouse: Found 3 mouse buttons [ 1522.058] (--) evdev: Logitech USB Laser Mouse: Found scroll wheel(s) [ 1522.058] (--) evdev: Logitech USB Laser Mouse: Found relative axes [ 1522.058] (--) evdev: Logitech USB Laser Mouse: Found x and y relative axes [ 1522.059] (II) evdev: Logitech USB Laser Mouse: Configuring as mouse [ 1522.059] (II) evdev: Logitech USB Laser Mouse: Adding scrollwheel support [ 1522.059] (**) evdev: Logitech USB Laser Mouse: YAxisMapping: buttons 4 and 5 [ 1522.059] (**) evdev: Logitech USB Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 1522.059] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C052.0002/input/input14/event14" [ 1522.059] (II) XINPUT: Adding extended input device "Logitech USB Laser Mouse" (type: MOUSE, id 14) [ 1522.059] (II) evdev: Logitech USB Laser Mouse: initialized for relative axes. [ 1522.059] (**) Logitech USB Laser Mouse: (accel) keeping acceleration scheme 1 [ 1522.059] (**) Logitech USB Laser Mouse: (accel) acceleration profile 0 [ 1522.059] (**) Logitech USB Laser Mouse: (accel) acceleration factor: 2.000 [ 1522.059] (**) Logitech USB Laser Mouse: (accel) acceleration threshold: 4 [ 1524.365] (II) config/udev: removing device Logitech USB Laser Mouse [ 1524.383] (II) evdev: Logitech USB Laser Mouse: Close [ 1524.383] (II) UnloadModule: "evdev" [ 1530.699] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/event14) [ 1530.699] (**) Logitech USB Laser Mouse: Applying InputClass "evdev pointer catchall" [ 1530.699] (II) Using input driver 'evdev' for 'Logitech USB Laser Mouse' [ 1530.699] (**) Logitech USB Laser Mouse: always reports core events [ 1530.699] (**) evdev: Logitech USB Laser Mouse: Device: "/dev/input/event14" [ 1530.699] (--) evdev: Logitech USB Laser Mouse: Vendor 0x46d Product 0xc052 [ 1530.699] (--) evdev: Logitech USB Laser Mouse: Found 3 mouse buttons [ 1530.699] (--) evdev: Logitech USB Laser Mouse: Found scroll wheel(s) [ 1530.699] (--) evdev: Logitech USB Laser Mouse: Found relative axes [ 1530.699] (--) evdev: Logitech USB Laser Mouse: Found x and y relative axes [ 1530.699] (II) evdev: Logitech USB Laser Mouse: Configuring as mouse [ 1530.699] (II) evdev: Logitech USB Laser Mouse: Adding scrollwheel support [ 1530.699] (**) evdev: Logitech USB Laser Mouse: YAxisMapping: buttons 4 and 5 [ 1530.699] (**) evdev: Logitech USB Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 1530.699] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C052.0003/input/input15/event14" [ 1530.699] (II) XINPUT: Adding extended input device "Logitech USB Laser Mouse" (type: MOUSE, id 14) [ 1530.699] (II) evdev: Logitech USB Laser Mouse: initialized for relative axes. [ 1530.699] (**) Logitech USB Laser Mouse: (accel) keeping acceleration scheme 1 [ 1530.699] (**) Logitech USB Laser Mouse: (accel) acceleration profile 0 [ 1530.699] (**) Logitech USB Laser Mouse: (accel) acceleration factor: 2.000 [ 1530.699] (**) Logitech USB Laser Mouse: (accel) acceleration threshold: 4 [ 1530.703] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/mouse1) [ 1530.703] (II) No input driver specified, ignoring this device. [ 1530.703] (II) This device may have been added with another device file. [ 1991.844] (II) intel(0): EDID vendor "CMN", prod id 5578 [ 1991.844] (II) intel(0): Printing DDC gathered Modelines: [ 1991.844] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP) [ 2099.588] (II) intel(0): EDID vendor "CMN", prod id 5578 [ 2099.588] (II) intel(0): Printing DDC gathered Modelines: [ 2099.588] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP) [ 2467.896] (II) intel(0): EDID vendor "CMN", prod id 5578 [ 2467.896] (II) intel(0): Printing DDC gathered Modelines: [ 2467.896] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP) [ 2613.276] (II) intel(0): EDID vendor "CMN", prod id 5578 [ 2613.276] (II) intel(0): Printing DDC gathered Modelines: [ 2613.276] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP) [ 2746.773] (II) intel(0): EDID vendor "CMN", prod id 5578 [ 2746.776] (II) intel(0): Printing DDC gathered Modelines: [ 2746.776] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP) [ 2958.016] (II) intel(0): EDID vendor "CMN", prod id 5578 [ 2958.016] (II) intel(0): Printing DDC gathered Modelines: [ 2958.016] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP) [ 9135.116] (II) intel(0): EDID vendor "CMN", prod id 5578 [ 9135.116] (II) intel(0): Printing DDC gathered Modelines: [ 9135.116] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP) [ 10139.700] (II) intel(0): EDID vendor "CMN", prod id 5578 [ 10139.700] (II) intel(0): Printing DDC gathered Modelines: [ 10139.700] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
Ostatnio edytowany przez xivi (2017-02-22 16:58:23)
Offline
cd..
tutal listing Xorg.0.log juz po instalacji bumblebee i Optimus prime
[ 15.575] X.Org X Server 1.16.4 Release Date: 2014-12-20 [ 15.575] X Protocol Version 11, Revision 0 [ 15.575] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian [ 15.575] Current Operating System: Linux szeluComp 3.16.0-4-amd64 #1 SMP Debian 3.16.39-1 (2016-12-30) x86_64 [ 15.575] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=66cf5c82-a97c-4d5d-b5ed-f4713d32e040 ro initrd=/install/initrd.gz quiet [ 15.575] Build Date: 11 February 2015 12:32:02AM [ 15.575] xorg-server 2:1.16.4-1 (http://www.debian.org/support) [ 15.575] Current version of pixman: 0.32.6 [ 15.575] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 15.575] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 15.575] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 22 11:29:03 2017 [ 15.637] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 15.684] (==) No Layout section. Using the first Screen section. [ 15.684] (==) No screen section available. Using defaults. [ 15.684] (**) |-->Screen "Default Screen Section" (0) [ 15.684] (**) | |-->Monitor "<default monitor>" [ 15.700] (==) No monitor specified for screen "Default Screen Section". Using a default monitor configuration. [ 15.700] (==) Automatically adding devices [ 15.700] (==) Automatically enabling devices [ 15.700] (==) Automatically adding GPU devices [ 15.723] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 15.723] Entry deleted from font path. [ 15.724] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, built-ins [ 15.724] (==) ModulePath set to "/usr/lib/xorg/modules" [ 15.724] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 15.730] (II) Loader magic: 0x7f622935fd80 [ 15.730] (II) Module ABI versions: [ 15.730] X.Org ANSI C Emulation: 0.4 [ 15.730] X.Org Video Driver: 18.0 [ 15.730] X.Org XInput driver : 21.0 [ 15.730] X.Org Server Extension : 8.0 [ 15.731] (II) xfree86: Adding drm device (/dev/dri/card0) [ 15.732] (--) PCI:*(0:0:2:0) 8086:1616:1043:10d0 rev 9, Mem @ 0x99000000/16777216, 0xa0000000/268435456, I/O @ 0x00005000/64 [ 15.732] (--) PCI: (0:4:0:0) 10de:1299:1043:105e rev 161, Mem @ 0x9a000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288 [ 15.732] (II) LoadModule: "glx" [ 15.757] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 15.960] (II) Module glx: vendor="X.Org Foundation" [ 15.960] compiled for 1.16.4, module version = 1.0.0 [ 15.960] ABI class: X.Org Server Extension, version 8.0 [ 15.960] (==) AIGLX enabled [ 15.960] (==) Matched intel as autoconfigured driver 0 [ 15.960] (==) Matched intel as autoconfigured driver 1 [ 15.960] (==) Matched modesetting as autoconfigured driver 2 [ 15.960] (==) Matched fbdev as autoconfigured driver 3 [ 15.960] (==) Matched vesa as autoconfigured driver 4 [ 15.960] (==) Assigned the driver to the xf86ConfigLayout [ 15.960] (II) LoadModule: "intel" [ 15.966] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 16.017] (II) Module intel: vendor="X.Org Foundation" [ 16.017] compiled for 1.15.99.904, module version = 2.21.15 [ 16.017] Module class: X.Org Video Driver [ 16.017] ABI class: X.Org Video Driver, version 18.0 [ 16.017] (II) LoadModule: "modesetting" [ 16.017] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 16.023] (II) Module modesetting: vendor="X.Org Foundation" [ 16.023] compiled for 1.16.4, module version = 0.9.0 [ 16.023] Module class: X.Org Video Driver [ 16.023] ABI class: X.Org Video Driver, version 18.0 [ 16.023] (II) LoadModule: "fbdev" [ 16.023] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 16.023] (II) Module fbdev: vendor="X.Org Foundation" [ 16.023] compiled for 1.15.99.904, module version = 0.4.4 [ 16.023] Module class: X.Org Video Driver [ 16.023] ABI class: X.Org Video Driver, version 18.0 [ 16.023] (II) LoadModule: "vesa" [ 16.023] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 16.024] (II) Module vesa: vendor="X.Org Foundation" [ 16.024] compiled for 1.15.99.904, module version = 2.3.3 [ 16.024] Module class: X.Org Video Driver [ 16.024] ABI class: X.Org Video Driver, version 18.0 [ 16.024] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics, HD Graphics 2000, HD Graphics 3000, HD Graphics 2500, HD Graphics 4000, HD Graphics P4000, HD Graphics 4600, HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100, HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200 [ 16.029] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 16.029] (II) FBDEV: driver for framebuffer: fbdev [ 16.029] (II) VESA: driver for VESA chipsets: vesa [ 16.029] (++) using VT number 7 [ 16.038] (WW) Falling back to old probe method for modesetting [ 16.038] (WW) Falling back to old probe method for fbdev [ 16.038] (II) Loading sub module "fbdevhw" [ 16.038] (II) LoadModule: "fbdevhw" [ 16.039] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 16.047] (II) Module fbdevhw: vendor="X.Org Foundation" [ 16.047] compiled for 1.16.4, module version = 0.0.2 [ 16.047] ABI class: X.Org Video Driver, version 18.0 [ 16.047] (WW) Falling back to old probe method for vesa [ 16.047] (II) intel(0): Creating default Display subsection in Screen section "Default Screen Section" for depth/fbbpp 24/32 [ 16.047] (==) intel(0): Depth 24, (--) framebuffer bpp 32 [ 16.047] (==) intel(0): RGB weight 888 [ 16.047] (==) intel(0): Default visual is TrueColor [ 16.047] (WW) intel(0): Unknown chipset [ 16.047] (**) intel(0): Relaxed fencing disabled [ 16.047] (**) intel(0): Wait on SwapBuffers? enabled [ 16.047] (**) intel(0): Triple buffering? enabled [ 16.047] (**) intel(0): Framebuffer linear [ 16.047] (**) intel(0): Pixmaps tiled [ 16.047] (**) intel(0): 3D buffers tiled [ 16.047] (**) intel(0): SwapBuffers wait enabled [ 16.047] (==) intel(0): video overlay key set to 0x101fe [ 16.047] (II) intel(0): Output eDP1 has no monitor section [ 16.047] (--) intel(0): found backlight control interface /sys/class/backlight/intel_backlight [ 16.047] (II) intel(0): Output DP1 has no monitor section [ 16.048] (II) intel(0): Output HDMI1 has no monitor section [ 16.048] (II) intel(0): EDID for output eDP1 [ 16.048] (II) intel(0): Manufacturer: CMN Model: 15ca Serial#: 0 [ 16.048] (II) intel(0): Year: 2014 Week: 34 [ 16.048] (II) intel(0): EDID Version: 1.4 [ 16.048] (II) intel(0): Digital Display Input [ 16.048] (II) intel(0): 6 bits per channel [ 16.048] (II) intel(0): Digital interface is DisplayPort [ 16.048] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19 [ 16.048] (II) intel(0): Gamma: 2.20 [ 16.048] (II) intel(0): No DPMS capabilities specified [ 16.048] (II) intel(0): Supported color encodings: RGB 4:4:4 [ 16.048] (II) intel(0): First detailed timing is preferred mode [ 16.048] (II) intel(0): Preferred mode is native pixel format and refresh rate [ 16.048] (II) intel(0): redX: 0.569 redY: 0.332 greenX: 0.328 greenY: 0.581 [ 16.048] (II) intel(0): blueX: 0.159 blueY: 0.141 whiteX: 0.313 whiteY: 0.329 [ 16.048] (II) intel(0): Manufacturer's mask: 0 [ 16.048] (II) intel(0): Supported detailed timing: [ 16.048] (II) intel(0): clock: 76.4 MHz Image Size: 344 x 193 mm [ 16.048] (II) intel(0): h_active: 1366 h_sync: 1434 h_sync_end 1479 h_blank_end 1592 h_border: 0 [ 16.048] (II) intel(0): v_active: 768 v_sync: 772 v_sync_end 779 v_blanking: 800 v_border: 0 [ 16.048] (II) intel(0): N156BGE-E42 [ 16.048] (II) intel(0): CMN [ 16.048] (II) intel(0): N156BGE-E42 [ 16.048] (II) intel(0): EDID (in hex): [ 16.048] (II) intel(0): 00ffffffffffff000daeca1500000000 [ 16.048] (II) intel(0): 221801049522137802c3c59155549428 [ 16.048] (II) intel(0): 24505400000001010101010101010101 [ 16.048] (II) intel(0): 010101010101da1d56e250002030442d [ 16.048] (II) intel(0): 470058c110000018000000fe004e3135 [ 16.048] (II) intel(0): 364247452d4534320a20000000fe0043 [ 16.048] (II) intel(0): 4d4e0a202020202020202020000000fe [ 16.048] (II) intel(0): 004e3135364247452d4534320a200055 [ 16.049] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported) [ 16.049] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 16.049] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported) [ 16.049] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported) [ 16.049] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported) [ 16.049] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported) [ 16.049] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported) [ 16.049] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported) [ 16.049] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported) [ 16.049] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported) [ 16.049] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported) [ 16.049] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 16.049] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported) [ 16.049] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported) [ 16.049] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported) [ 16.049] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported) [ 16.049] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 16.049] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported) [ 16.049] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported) [ 16.049] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported) [ 16.049] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported) [ 16.049] (II) intel(0): Printing probed modes for output eDP1 [ 16.049] (II) intel(0): Modeline "1366x768"x60.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP) [ 16.049] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d) [ 16.049] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d) [ 16.049] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d) [ 16.049] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d) [ 16.049] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d) [ 16.049] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d) [ 16.049] (II) intel(0): EDID for output DP1 [ 16.049] (II) intel(0): EDID for output HDMI1 [ 16.049] (II) intel(0): Output eDP1 connected [ 16.049] (II) intel(0): Output DP1 disconnected [ 16.049] (II) intel(0): Output HDMI1 disconnected [ 16.049] (II) intel(0): Using exact sizes for initial modes [ 16.049] (II) intel(0): Output eDP1 using initial mode 1366x768 [ 16.049] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 16.049] (II) intel(0): Kernel page flipping support detected, enabling [ 16.050] (==) intel(0): DPI set to (96, 96) [ 16.050] (II) Loading sub module "fb" [ 16.050] (II) LoadModule: "fb" [ 16.050] (II) Loading /usr/lib/xorg/modules/libfb.so [ 16.067] (II) Module fb: vendor="X.Org Foundation" [ 16.067] compiled for 1.16.4, module version = 1.0.0 [ 16.067] ABI class: X.Org ANSI C Emulation, version 0.4 [ 16.067] (II) Loading sub module "dri2" [ 16.067] (II) LoadModule: "dri2" [ 16.067] (II) Module "dri2" already built-in [ 16.067] (II) UnloadModule: "modesetting" [ 16.067] (II) Unloading modesetting [ 16.067] (II) UnloadModule: "fbdev" [ 16.067] (II) Unloading fbdev [ 16.067] (II) UnloadSubModule: "fbdevhw" [ 16.067] (II) Unloading fbdevhw [ 16.067] (II) UnloadModule: "vesa" [ 16.067] (II) Unloading vesa [ 16.067] (==) Depth 24 pixmap format is 32 bpp [ 16.067] (WW) intel(0): cannot enable DRI2 whilst forcing software fallbacks [ 16.067] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, untiled [ 16.097] (II) UXA(0): Driver registered support for the following operations: [ 16.097] (II) solid [ 16.097] (II) copy [ 16.097] (II) composite (RENDER acceleration) [ 16.097] (II) put_image [ 16.097] (II) get_image [ 16.097] (==) intel(0): Backing store enabled [ 16.097] (==) intel(0): Silken mouse enabled [ 16.105] (II) intel(0): Initializing HW Cursor [ 16.105] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 16.105] (==) intel(0): DPMS enabled [ 16.105] (==) intel(0): Intel XvMC decoder disabled [ 16.105] (WW) intel(0): Disabling Xv because no adaptors could be initialized. [ 16.105] (II) intel(0): direct rendering: Failed [ 16.105] (==) intel(0): hotplug detection: "enabled" [ 16.124] (--) RandR disabled [ 16.129] (II) SELinux: Disabled on system [ 16.130] (II) AIGLX: Screen 0 is not DRI2 capable [ 16.130] (EE) AIGLX: reverting to software rendering [ 16.787] (II) AIGLX: Loaded and initialized swrast [ 16.787] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 16.787] (II) intel(0): Setting screen physical size to 361 x 203 [ 17.427] (II) config/udev: Adding input device Power Button (/dev/input/event2) [ 17.427] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 17.427] (II) LoadModule: "evdev" [ 17.427] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 17.495] (II) Module evdev: vendor="X.Org Foundation" [ 17.495] compiled for 1.16.0, module version = 2.9.0 [ 17.495] Module class: X.Org XInput Driver [ 17.495] ABI class: X.Org XInput driver, version 21.0 [ 17.495] (II) Using input driver 'evdev' for 'Power Button' [ 17.495] (**) Power Button: always reports core events [ 17.495] (**) evdev: Power Button: Device: "/dev/input/event2" [ 17.495] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 17.495] (--) evdev: Power Button: Found keys [ 17.495] (II) evdev: Power Button: Configuring as keyboard [ 17.495] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2" [ 17.496] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 17.496] (**) Option "xkb_rules" "evdev" [ 17.496] (**) Option "xkb_model" "pc105" [ 17.496] (**) Option "xkb_layout" "us" [ 17.496] (II) config/udev: Adding input device Video Bus (/dev/input/event4) [ 17.496] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 17.496] (II) Using input driver 'evdev' for 'Video Bus' [ 17.496] (**) Video Bus: always reports core events [ 17.496] (**) evdev: Video Bus: Device: "/dev/input/event4" [ 17.496] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 17.496] (--) evdev: Video Bus: Found keys [ 17.496] (II) evdev: Video Bus: Configuring as keyboard [ 17.496] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4" [ 17.496] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 17.496] (**) Option "xkb_rules" "evdev" [ 17.496] (**) Option "xkb_model" "pc105" [ 17.496] (**) Option "xkb_layout" "us" [ 17.497] (II) config/udev: Adding input device Video Bus (/dev/input/event5) [ 17.497] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 17.497] (II) Using input driver 'evdev' for 'Video Bus' [ 17.497] (**) Video Bus: always reports core events [ 17.497] (**) evdev: Video Bus: Device: "/dev/input/event5" [ 17.497] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 17.497] (--) evdev: Video Bus: Found keys [ 17.497] (II) evdev: Video Bus: Configuring as keyboard [ 17.497] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/LNXVIDEO:01/input/input5/event5" [ 17.497] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8) [ 17.497] (**) Option "xkb_rules" "evdev" [ 17.497] (**) Option "xkb_model" "pc105" [ 17.497] (**) Option "xkb_layout" "us" [ 17.498] (II) config/udev: Adding input device Lid Switch (/dev/input/event0) [ 17.498] (II) No input driver specified, ignoring this device. [ 17.498] (II) This device may have been added with another device file. [ 17.498] (II) config/udev: Adding input device Sleep Button (/dev/input/event1) [ 17.498] (**) Sleep Button: Applying InputClass "evdev keyboard catchall" [ 17.498] (II) Using input driver 'evdev' for 'Sleep Button' [ 17.498] (**) Sleep Button: always reports core events [ 17.498] (**) evdev: Sleep Button: Device: "/dev/input/event1" [ 17.498] (--) evdev: Sleep Button: Vendor 0 Product 0x3 [ 17.498] (--) evdev: Sleep Button: Found keys [ 17.498] (II) evdev: Sleep Button: Configuring as keyboard [ 17.498] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event1" [ 17.498] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9) [ 17.498] (**) Option "xkb_rules" "evdev" [ 17.498] (**) Option "xkb_model" "pc105" [ 17.498] (**) Option "xkb_layout" "us" [ 17.499] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event10) [ 17.499] (II) No input driver specified, ignoring this device. [ 17.499] (II) This device may have been added with another device file. [ 17.499] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event11) [ 17.499] (II) No input driver specified, ignoring this device. [ 17.499] (II) This device may have been added with another device file. [ 17.500] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event9) [ 17.500] (II) No input driver specified, ignoring this device. [ 17.500] (II) This device may have been added with another device file. [ 17.500] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/event6) [ 17.500] (**) Logitech USB Laser Mouse: Applying InputClass "evdev pointer catchall" [ 17.500] (II) Using input driver 'evdev' for 'Logitech USB Laser Mouse' [ 17.500] (**) Logitech USB Laser Mouse: always reports core events [ 17.500] (**) evdev: Logitech USB Laser Mouse: Device: "/dev/input/event6" [ 17.500] (--) evdev: Logitech USB Laser Mouse: Vendor 0x46d Product 0xc052 [ 17.500] (--) evdev: Logitech USB Laser Mouse: Found 3 mouse buttons [ 17.500] (--) evdev: Logitech USB Laser Mouse: Found scroll wheel(s) [ 17.500] (--) evdev: Logitech USB Laser Mouse: Found relative axes [ 17.500] (--) evdev: Logitech USB Laser Mouse: Found x and y relative axes [ 17.500] (II) evdev: Logitech USB Laser Mouse: Configuring as mouse [ 17.500] (II) evdev: Logitech USB Laser Mouse: Adding scrollwheel support [ 17.500] (**) evdev: Logitech USB Laser Mouse: YAxisMapping: buttons 4 and 5 [ 17.500] (**) evdev: Logitech USB Laser Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 17.500] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:046D:C052.0001/input/input6/event6" [ 17.500] (II) XINPUT: Adding extended input device "Logitech USB Laser Mouse" (type: MOUSE, id 10) [ 17.500] (II) evdev: Logitech USB Laser Mouse: initialized for relative axes. [ 17.501] (**) Logitech USB Laser Mouse: (accel) keeping acceleration scheme 1 [ 17.501] (**) Logitech USB Laser Mouse: (accel) acceleration profile 0 [ 17.501] (**) Logitech USB Laser Mouse: (accel) acceleration factor: 2.000 [ 17.501] (**) Logitech USB Laser Mouse: (accel) acceleration threshold: 4 [ 17.501] (II) config/udev: Adding input device Logitech USB Laser Mouse (/dev/input/mouse0) [ 17.501] (II) No input driver specified, ignoring this device. [ 17.501] (II) This device may have been added with another device file. [ 17.501] (II) config/udev: Adding input device USB2.0 VGA UVC WebCam (/dev/input/event14) [ 17.501] (**) USB2.0 VGA UVC WebCam: Applying InputClass "evdev keyboard catchall" [ 17.501] (II) Using input driver 'evdev' for 'USB2.0 VGA UVC WebCam' [ 17.501] (**) USB2.0 VGA UVC WebCam: always reports core events [ 17.501] (**) evdev: USB2.0 VGA UVC WebCam: Device: "/dev/input/event14" [ 17.502] (--) evdev: USB2.0 VGA UVC WebCam: Vendor 0x4f2 Product 0xb52b [ 17.502] (--) evdev: USB2.0 VGA UVC WebCam: Found keys [ 17.502] (II) evdev: USB2.0 VGA UVC WebCam: Configuring as keyboard [ 17.502] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input14/event14" [ 17.502] (II) XINPUT: Adding extended input device "USB2.0 VGA UVC WebCam" (type: KEYBOARD, id 11) [ 17.502] (**) Option "xkb_rules" "evdev" [ 17.502] (**) Option "xkb_model" "pc105" [ 17.502] (**) Option "xkb_layout" "us" [ 17.502] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12) [ 17.502] (II) No input driver specified, ignoring this device. [ 17.502] (II) This device may have been added with another device file. [ 17.503] (II) config/udev: Adding input device ELAN1000:00 04F3:0401 (/dev/input/event7) [ 17.503] (**) ELAN1000:00 04F3:0401: Applying InputClass "evdev pointer catchall" [ 17.503] (II) Using input driver 'evdev' for 'ELAN1000:00 04F3:0401' [ 17.503] (**) ELAN1000:00 04F3:0401: always reports core events [ 17.503] (**) evdev: ELAN1000:00 04F3:0401: Device: "/dev/input/event7" [ 17.520] (--) evdev: ELAN1000:00 04F3:0401: Vendor 0x4f3 Product 0x401 [ 17.520] (--) evdev: ELAN1000:00 04F3:0401: Found 3 mouse buttons [ 17.520] (--) evdev: ELAN1000:00 04F3:0401: Found scroll wheel(s) [ 17.520] (--) evdev: ELAN1000:00 04F3:0401: Found relative axes [ 17.520] (--) evdev: ELAN1000:00 04F3:0401: Found x and y relative axes [ 17.520] (II) evdev: ELAN1000:00 04F3:0401: Configuring as mouse [ 17.520] (II) evdev: ELAN1000:00 04F3:0401: Adding scrollwheel support [ 17.520] (**) evdev: ELAN1000:00 04F3:0401: YAxisMapping: buttons 4 and 5 [ 17.520] (**) evdev: ELAN1000:00 04F3:0401: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 17.520] (**) Option "config_info" "udev:/sys/devices/pci0000:00/INT3433:00/i2c-9/i2c-ELAN1000:00/0018:04F3:0401.0002/input/input7/event7" [ 17.520] (II) XINPUT: Adding extended input device "ELAN1000:00 04F3:0401" (type: MOUSE, id 12) [ 17.520] (II) evdev: ELAN1000:00 04F3:0401: initialized for relative axes. [ 17.521] (**) ELAN1000:00 04F3:0401: (accel) keeping acceleration scheme 1 [ 17.521] (**) ELAN1000:00 04F3:0401: (accel) acceleration profile 0 [ 17.521] (**) ELAN1000:00 04F3:0401: (accel) acceleration factor: 2.000 [ 17.521] (**) ELAN1000:00 04F3:0401: (accel) acceleration threshold: 4 [ 17.521] (II) config/udev: Adding input device ELAN1000:00 04F3:0401 (/dev/input/mouse1) [ 17.521] (II) No input driver specified, ignoring this device. [ 17.521] (II) This device may have been added with another device file. [ 17.521] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event13) [ 17.521] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall" [ 17.521] (II) Using input driver 'evdev' for 'Asus WMI hotkeys' [ 17.521] (**) Asus WMI hotkeys: always reports core events [ 17.521] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event13" [ 17.521] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0 [ 17.521] (--) evdev: Asus WMI hotkeys: Found keys [ 17.521] (II) evdev: Asus WMI hotkeys: Configuring as keyboard [ 17.521] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input13/event13" [ 17.521] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 13) [ 17.521] (**) Option "xkb_rules" "evdev" [ 17.521] (**) Option "xkb_model" "pc105" [ 17.521] (**) Option "xkb_layout" "us" [ 17.522] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3) [ 17.522] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 17.522] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 17.522] (**) AT Translated Set 2 keyboard: always reports core events [ 17.522] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3" [ 17.522] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 17.522] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 17.522] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 17.522] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event3" [ 17.522] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14) [ 17.522] (**) Option "xkb_rules" "evdev" [ 17.522] (**) Option "xkb_model" "pc105" [ 17.522] (**) Option "xkb_layout" "us" [ 17.522] (II) config/udev: Adding input device PC Speaker (/dev/input/event8) [ 17.522] (II) No input driver specified, ignoring this device. [ 17.522] (II) This device may have been added with another device file. [ 17.525] (II) config/udev: removing device USB2.0 VGA UVC WebCam [ 17.564] (II) evdev: USB2.0 VGA UVC WebCam: Close [ 17.564] (II) UnloadModule: "evdev" [ 17.564] (II) config/udev: Adding input device USB2.0 VGA UVC WebCam (/dev/input/event14) [ 17.564] (**) USB2.0 VGA UVC WebCam: Applying InputClass "evdev keyboard catchall" [ 17.564] (II) Using input driver 'evdev' for 'USB2.0 VGA UVC WebCam' [ 17.564] (**) USB2.0 VGA UVC WebCam: always reports core events [ 17.564] (**) evdev: USB2.0 VGA UVC WebCam: Device: "/dev/input/event14" [ 17.564] (--) evdev: USB2.0 VGA UVC WebCam: Vendor 0x4f2 Product 0xb52b [ 17.564] (--) evdev: USB2.0 VGA UVC WebCam: Found keys [ 17.564] (II) evdev: USB2.0 VGA UVC WebCam: Configuring as keyboard [ 17.564] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input14/event14" [ 17.564] (II) XINPUT: Adding extended input device "USB2.0 VGA UVC WebCam" (type: KEYBOARD, id 11) [ 17.564] (**) Option "xkb_rules" "evdev" [ 17.564] (**) Option "xkb_model" "pc105" [ 17.564] (**) Option "xkb_layout" "us" [ 22.980] (II) intel(0): EDID vendor "CMN", prod id 5578 [ 22.980] (II) intel(0): Printing DDC gathered Modelines: [ 22.980] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP) [ 26.475] (II) intel(0): EDID vendor "CMN", prod id 5578 [ 26.475] (II) intel(0): Printing DDC gathered Modelines: [ 26.475] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP) [ 45.319] (II) intel(0): EDID vendor "CMN", prod id 5578 [ 45.319] (II) intel(0): Printing DDC gathered Modelines: [ 45.319] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP) [ 46.979] (II) intel(0): EDID vendor "CMN", prod id 5578 [ 46.980] (II) intel(0): Printing DDC gathered Modelines: [ 46.980] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP) [ 9945.188] (II) intel(0): EDID vendor "CMN", prod id 5578 [ 9945.188] (II) intel(0): Printing DDC gathered Modelines: [ 9945.188] (II) intel(0): Modeline "1366x768"x0.0 76.42 1366 1434 1479 1592 768 772 779 800 -hsync -vsync (48.0 kHz eP)
po instalacji bumblebee z naciskiem na dodanie odpowiednich wpisow w /etc/apt/source.list - aby sciagnac drivery odpowiednie dla mojego sprzetu
dpkg --list | grep nvidia pokazuje jednak ze
ii bumblebee-nvidia 3.2.1-7 amd64 NVIDIA Optimus support using the proprietary NVIDIA driver ii glx-alternative-nvidia 0.5.1 amd64 allows the selection of NVIDIA as GLX provider ii libegl1-nvidia:amd64 340.101-1 amd64 NVIDIA binary EGL library ii libgl1-nvidia-glx:amd64 340.101-1 amd64 NVIDIA binary OpenGL/GLX libraries ii libgl1-nvidia-glx:i386 340.101-1 i386 NVIDIA binary OpenGL/GLX libraries ii libgl1-nvidia-glx-i386 340.101-1 i386 NVIDIA binary OpenGL/GLX 32-bit libraries ii libgles1-nvidia:amd64 340.101-1 amd64 NVIDIA binary OpenGL|ES 1.x library ii libgles2-nvidia:amd64 340.101-1 amd64 NVIDIA binary OpenGL|ES 2.x library ii libnvidia-eglcore:amd64 340.101-1 amd64 NVIDIA binary EGL core libraries ii libnvidia-ml1:amd64 340.101-1 amd64 NVIDIA Management Library (NVML) runtime library ii nvidia-alternative 340.101-1 amd64 allows the selection of NVIDIA as GLX provider ii nvidia-driver 340.101-1 amd64 NVIDIA metapackage ii nvidia-driver-bin 340.101-1 amd64 NVIDIA driver support binaries ii nvidia-installer-cleanup 20141201+1 amd64 cleanup after driver installation with the nvidia-installer ii nvidia-kernel-common 20141201+1 amd64 NVIDIA binary kernel module support files ii nvidia-kernel-dkms 340.101-1 amd64 NVIDIA binary kernel module DKMS source ii nvidia-modprobe 340.46-1 amd64 utility to load NVIDIA kernel modules and create device nodes ii nvidia-settings 340.46-2 amd64 tool for configuring the NVIDIA graphics driver ii nvidia-support 20141201+1 amd64 NVIDIA binary graphics driver support files ii nvidia-vdpau-driver:amd64 340.101-1 amd64 Video Decode and Presentation API for Unix - NVIDIA driver ii xserver-xorg-video-nvidia 340.101-1 amd64 NVIDIA binary Xorg driver
...co pokazuje ze zamiast tego co potrzebuje czyli Version 367.44 to mi sciagnelo wersje 340 w odniesieniu do [url]https://wiki.debian.org/NvidiaGraphicsDrivers[/url]
co sprawia ze jestem w temacie bardziej obeznany ale dalej w czarnej dupie
sudo adduser $USER bumblebee - to nie przejdzie bo konsola wywala mi komunikat ze group already exist - oczywiscie za USER podstawiam swoja nazwe uzytkownika domowego
aktualnie moje /etc/apt/source.list wyglada tak
# deb cdrom:[Debian GNU/Linux 8 _Jessie_ - Official Snapshot amd64 LIVE/INSTALL Binary 20170116-23:46]/ jessie main # deb cdrom:[Debian GNU/Linux 8 _Jessie_ - Official Snapshot amd64 LIVE/INSTALL Binary 20170116-23:46]/ jessie main deb http://ftp.pl.debian.org/debian/ jessie main contrib non-free deb-src http://ftp.pl.debian.org/debian/ jessie main contrib non-free deb http://security.debian.org/ jessie/updates main deb-src http://security.debian.org/ jessie/updates main # jessie-updates, previously known as 'volatile' deb http://ftp.pl.debian.org/debian/ jessie-updates main contrib non-free deb-src http://ftp.pl.debian.org/debian/ jessie-updates main contrib non-free ## podstawowe repozytorium deb http://ftp.pl.debian.org/debian/ stable non-free contrib main ## uaktualnienia bezpieczeństwa deb http://security.debian.org/ stable/updates non-free contrib main ## często uaktualniane pakiety, np. dotyczące ## filtrowania spamu czy skanowania antywirusowego deb http://ftp.pl.debian.org/debian/ stable-updates non-free contrib main ## backporty - programy przepakietowane dla stable z testinga deb http://ftp.pl.debian.org/debian/ jessie-backports non-free contrib main ## przeglądarka Google Chrome deb http://dl.google.com/linux/chrome/deb/ stable main ## deb-multimedia - dodatkowe kodeki, odtwarzacze, etc. deb http://www.deb-multimedia.org/ stable non-free main # jessie-backports deb http://httpredir.debian.org/debian jessie-backports main contrib non-free
...zatem jak naprawic to by zainstalowac wersie driverow Version 367.44 - i zrobic to tak umiejetnie zeby nie spartolic sprawy :) pomocy...
Czy ktos kto sie na tym zna moglby stworzyc/przykleic watek w konwencji od A-Z jak ten temat ogarnac?
Probowalem na tym laptopie z Windows 10 - instalacja OS - instalacja dostarczonych driverow pod winshita i aplikacji z nVidia pod winshita + instalacja Eve online - kilka klikniec ustawien [b] podzespoly tego konkretnego lapka dzialaja [/b] czyli laptop sprawny a EvE chodzi na Low plynnie i bez problemow.
Panowie - na windows hula na linuxie nie pojdzie? :D no way!
A, ze jak to mawial Zoltan z Wieska - "Nie mam siebie za miekkiego ku... :D to musi mi sie udac to ogarnac na linuxie
Ostatnio edytowany przez xivi (2017-02-22 16:12:55)
Offline
Po co instalowałeś 340 jak nie obsługują twojej karty.
A nie trzeba było sobie ułatwić i zainstalować testowego Debiana.
Mówisz że na pewno zrobiłeś to tak jak jest opisane tu:
https://wiki.debian.org/NvidiaGraphicsDrivers#Version_367.44_.28via_jessie-backports.29
czyli tak (lub inny kernel jaki tam jest):
apt-get install -t jessie-backports linux-image-4.9.0-0.bpo.1-amd64
restart komputera i tak
apt-get install -t jessie-backports linux-headers-$(uname -r|sed 's,[^-]*-[^-]*-,,')
apt-get install -t jessie-backports nvidia-driver nvidia-kernel-dkms bumblebee-nvidia primus
Opis jest dla 367.44 ale instaluje już nowsze 375.26. Ja używam testowego to dopisałem parę rzeczy które i tak powinny się instalować a nie mam jak sprawdzić na jessie czy tak jest.
Ostatnio edytowany przez jawojx (2017-02-22 16:16:21)
Offline
[quote=jawojx]Po co instalowałeś 340 jak nie obsługują twojej karty.
A nie trzeba było sobie ułatwić i zainstalować testowego Debiana.[/quote]
- jestem swiezy w tematyce linuxa - moze dlatego ;(
dobra czekaj, wyspie sie pozniej albo RiP - juz wyjasniam - jeszcze nie rozumiem do konca czym jest to o czym piszesz; zastanawialem sie przy wyborze wersji pod katem podzespolow laptopa i dlatego mam taka wersje debiana.
[quote=jawojx]Mówisz że na pewno zrobiłeś to tak jak jest opisane tu:
https://wiki.debian.org/NvidiaGraphicsDrivers#Version_367.44_.28via_jessie-backports.29[/quote]
- teraz to juz sam nie wiem tbh - lepiej zrobie jak pojde sie wyspac :)
Ale mysle ze postepujac jak bylo opisane i tak sciagnelo nie ta wersje co trzeba
z tego co odtworzylem sobie z pamieci to bylo tak ze wykonalem sekwencyjnie
1 Add jessie-backports to your /etc/apt/sources.list, for example:
# jessie-backports deb http://httpredir.debian.org/debian jessie-backports main contrib non-free
2 Install Linux headers for the kernel you are using. If you are using the 3.16 Linux kernel in Debian Jessie:
# apt-get install linux-headers-$(uname -r|sed 's,[^-]*-[^-]*-,,')
<--- [b] popraw mnie jezeli jestem w bledzie ale mysle ze to powinienem byl pominac i wykonac to ponizej[/b]
Or if you are already using a Linux kernel from jessie-backports:
# apt-get install -t jessie-backports linux-headers-$(uname -r|sed 's,[^-]*-[^-]*-,,')
i chyba dlatego mam wersje 340 zamiast 367 dla mojej wersji debian jessie - [b] zatem jak to naprawic zeby nie zepsuc bardziej[/b]
nie mow ze mam na nowo instalowac inna wersje debian jessie - ta testowa ? omg
[quote=jawojx]Opis jest dla 367.44 ale instaluje już nowsze 375.26. Ja używam testowego to dopisałem parę rzeczy które i tak powinny się instalować a nie mam jak sprawdzić na jessie czy tak jest.[/quote]
...? zabij mnie ale chyba musze doczytac pdst info z neta zeby zrozumiec co chciales powiedziec - ale to juz jak sie wyspie
Pozdro :)
Ostatnio edytowany przez xivi (2017-02-22 16:45:07)
Offline
[b]xivi[/b]: ...popraw mnie jezeli jestem w bledzie ale mysle ze to powinienem byl pominac i wykonac to ponizej...[/quote]
No tak, miałeś instalować z backportów jessie-go.
Zaraz ja nie będę wiedział co robię. Jak byś instalował z backportów pakiet nvidia-driver to by ci zainstalował 375.26, a tak to się trzasnąłeś. W testowym pakiet nvidia-driver to 375.26. To jest na Debian Jessie.Kod:
apt-get updateTak jak pisałem zainstaluj kernel ( sprawdzić jaki jest najnowszy )potem [b]restart komputera [/b]( nie jest konieczny ale inaczej musisz instalować headersy) instalacja:
Kod:
apt-get install -t jessie-backports linux-image-4.9.0-0.bpo.1-amd64potem restart komputera instalacja nagłówków
Kod:
apt-get install -t jessie-backports linux-headers-$(uname -r|sed 's,[^-]*-[^-]*-,,')Odinstaluj 340:
Kod:
apt-get purge nvidia-*Zainstaluj z backportów najnowszy sterownik:
Kod:
apt-get install -t jessie-backports nvidia-driver nvidia-kernel-dkms bumblebee-nvidia primusrestart i sprawdź:
Kod:
optirun glxgears -infoi na intelu
Kod:
glxgears -infoJak by nie było glxgears doinstaluj mesa-utils.
To wszystko jest tam napisane. Masz zdublowane wpisy repozytoriów jessie-backports, mniejsza o to.
Offline
Dzieki za pomoc! :D
Udalo sie!
Laptop Asus ustawiony, nVIDIA X Server Settings ustawione, Wine i EvE Online ustawione.
1. Niby dziala - tylko jak to sprawdzic? Jak sprawdzic czy jak wlacze gre to faktycznie jest uzywana GeForce 920M? Moze tylko zintegrowana grafika intelHD smiga na lepszych/aktualnych driver'ach?
2. [quote=jawojx]Tak jak pisałem zainstaluj kernel ( sprawdzić jaki jest najnowszy )potem restart komputera ( nie jest konieczny ale inaczej musisz instalować headersy) instalacja:
Kod:
apt-get install -t jessie-backports linux-image-4.9.0-0.bpo.1-amd64
potem restart komputera instalacja nagłówków
Kod:
apt-get install -t jessie-backports linux-headers-$(uname -r|sed 's,[^-]*-[^-]*-,,')[/quote]
Po tych czynnosciach i restarcie, juz na wstepie pojawia sie blad o nieprawidlowym zaladowaniu kernel module - gdzie jest zapisywany ten log - (wkleje jak znajde)
Offline
Czyli działa.
[b]xivi[/b]: ...nVIDIA X Server Settings ustawione...[/quote]
To znaczy że sterowniki dla nvidii wgrałeś prawidłowo w innym przypadku nie da się ustawić i masz nVidie uruchomioną.
Odpowiedz na 1. Można tak:Kod:
glxinfo | grep versiondla nvidia-optimus:
Kod:
optirun glxinfo | grep versionlub tak:
Kod:
glxinfo | grep OpenGLKod:
optirun glxinfo | grep OpenGLI tak jak już pisałem jak sprawdzić nvidia-optimus:
Kod:
optirun glxgears -infoi do porównania
Kod:
glxgears -infogry z Windowsa na nvidia-optimus uruchamiamy tak (no chyba tak bo ja nie używam wine i nie gram, ale jak inaczej, no chyba że mamy nVidie włączoną domyślnie to normalnie):
Kod:
optirun wine gra.exeOdpowiedz na 2.
[b]xivi[/b]:Po tych czynnosciach i restarcie, juz na wstepie pojawia sie blad o nieprawidlowym zaladowaniu kernel module - gdzie jest zapisywany ten log - (wkleje jak znajde)[/quote]
Pojawiało się przed instalacją nowych sterowników, czy pojawia się. Może to nie jest związane z nVidia.Kod:
uname -rKod:
echo linux-headers-$(uname -r|sed 's,[^-]*-[^-]*-,,')Kod:
cat dmesg | grep errorKod:
cat /var/log/Xorg.0.log | grep errorJeżeli ktoś nie chce mieć inaczej, to chodzi o to by system uruchamiał się na intelu, a do ciężarów była nVidia. Każdy robi jak mu odpowiada.
Ostatnio edytowany przez jawojx (2017-02-23 00:08:33)
Offline
Mam dosyć podobny problem do tego w wątku - mam laptopa z dwoma kartami graficznymi: Intela i Nvidia Geforce GT 740M. System: Debian Jessie. Mam poinstalowane bumblebee oraz stery nvidii, wszystko gra i śmiga. Jednak chcę zainstalować nowszą wersję sterów z backportów, (m.in. dlatego żeby mieć możliwość działania nowszej wersji CUDA oraz sprzętowego wsparcia dla kodowania filmów H264) i tutaj zaczynają się schody.
$ uname -a Linux lestaro 3.16.0-4-amd64 #1 SMP Debian 3.16.39-1+deb8u2 (2017-03-07) x86_64 GNU/Linux
Próbuję robić wg instrukcji z https://wiki.debian.org/NvidiaGraphicsDrivers#Version_375.26_.28via_jessie-backports.29 :
#apt-get install linux-headers-$(uname -r|sed 's,[^-]*-[^-]*-,,') Czytanie list pakietów... Gotowe Budowanie drzewa zależności Odczyt informacji o stanie... Gotowe linux-headers-amd64 jest już w najnowszej wersji. 0 aktualizowanych, 0 nowo instalowanych, 0 usuwanych i 1 nieaktualizowanych
apt update i:
# apt-get install -t jessie-backports nvidia-driver Czytanie list pakietów... Gotowe Budowanie drzewa zależności Odczyt informacji o stanie... Gotowe Nie udało się zainstalować niektórych pakietów. Może to oznaczać, że zażądano niemożliwej sytuacji lub użyto dystrybucji niestabilnej, w której niektóre pakiety nie zostały jeszcze utworzone lub przeniesione z katalogu Incoming ("Przychodzące"). Następujące informacje mogą pomóc rozwiązać sytuację: Następujące pakiety mają niespełnione zależności: nvidia-driver : Wymaga: nvidia-vdpau-driver (= 375.26-1~bpo8+1) ale nie zostanie zainstalowany E: Nie udało się naprawić problemów, zatrzymano uszkodzone pakiety.
próba komendą z https://forum.dug.net.pl/viewtopic.php?pid=308919#p308919 daje praktycznie ten sam efekt:
# apt-get install -t jessie-backports nvidia-driver nvidia-kernel-dkms bumblebee-nvidia primus Czytanie list pakietów... Gotowe Budowanie drzewa zależności Odczyt informacji o stanie... Gotowe Nie udało się zainstalować niektórych pakietów. Może to oznaczać, że zażądano niemożliwej sytuacji lub użyto dystrybucji niestabilnej, w której niektóre pakiety nie zostały jeszcze utworzone lub przeniesione z katalogu Incoming ("Przychodzące"). Następujące informacje mogą pomóc rozwiązać sytuację: Następujące pakiety mają niespełnione zależności: nvidia-driver : Wymaga: nvidia-vdpau-driver (= 375.26-1~bpo8+1) ale nie zostanie zainstalowany E: Nie udało się naprawić problemów, zatrzymano uszkodzone pakiety.
Próba instalacji tylko tego pakietu nvidia-vdpau-driver z backportów:
# apt-get install -t jessie-backports nvidia-vdpau-driver Czytanie list pakietów... Gotowe Budowanie drzewa zależności Odczyt informacji o stanie... Gotowe Nie udało się zainstalować niektórych pakietów. Może to oznaczać, że zażądano niemożliwej sytuacji lub użyto dystrybucji niestabilnej, w której niektóre pakiety nie zostały jeszcze utworzone lub przeniesione z katalogu Incoming ("Przychodzące"). Następujące informacje mogą pomóc rozwiązać sytuację: Następujące pakiety mają niespełnione zależności: nvidia-vdpau-driver : Wymaga: libvdpau1 (>= 0.9) ale 0.8-3+deb8u2 ma zostać zainstalowany Poleca: nvidia-kernel-dkms (= 375.26-1~bpo8+1) lub nvidia-kernel-375.26 E: Nie udało się naprawić problemów, zatrzymano uszkodzone pakiety.
O co tutaj może chodzić i jak to obejść, naprawić?
sources.list
deb http://ftp.pl.debian.org/debian/ jessie main contrib non-free deb http://http.debian.net/debian/ jessie-backports main contrib non-free ## uaktualnienia bezpieczeństwa deb http://security.debian.org/ jessie/updates main contrib non-free ## przeglądarka Google Chrome #deb http://dl.google.com/linux/chrome/deb/ stable main ## deb-multimedia - dodatkowe kodeki, odtwarzacze, etc. deb http://www.deb-multimedia.org/ jessie main non-free
$ dpkg --list | grep -i nvidia ii bbswitch-dkms 0.8-1 amd64 Interface for toggling the power on NVIDIA Optimus video cards ii bumblebee 3.2.1-7 amd64 NVIDIA Optimus support for Linux ii bumblebee-nvidia 3.2.1-7 amd64 NVIDIA Optimus support using the proprietary NVIDIA driver ii glx-alternative-nvidia 0.5.1 amd64 allows the selection of NVIDIA as GLX provider ii libcg:amd64 3.1.0013-2 amd64 Nvidia Cg core runtime library ii libcggl:amd64 3.1.0013-2 amd64 Nvidia Cg Opengl runtime library rc libcublas6.0:amd64 6.0.37-5 amd64 NVIDIA cuBLAS Library ii libcuda1:amd64 340.101-1 amd64 NVIDIA CUDA Driver Library ii libcuda1:i386 340.101-1 i386 NVIDIA CUDA Driver Library ii libcuda1-i386 340.101-1 i386 NVIDIA CUDA 32-bit runtime library rc libcudart6.0:amd64 6.0.37-5 amd64 NVIDIA CUDA Runtime Library rc libcufft6.0:amd64 6.0.37-5 amd64 NVIDIA cuFFT Library rc libcufftw6.0:amd64 6.0.37-5 amd64 NVIDIA cuFFTW Library rc libcuinj64-6.0:amd64 6.0.37-5 amd64 NVIDIA CUINJ Library (64-bit) rc libcurand6.0:amd64 6.0.37-5 amd64 NVIDIA cuRAND Library rc libcusparse6.0:amd64 6.0.37-5 amd64 NVIDIA cuSPARSE Library ii libegl1-nvidia:amd64 340.101-1 amd64 NVIDIA binary EGL library ii libgl1-nvidia-glx:amd64 340.101-1 amd64 NVIDIA binary OpenGL/GLX libraries ii libgl1-nvidia-glx:i386 340.101-1 i386 NVIDIA binary OpenGL/GLX libraries ii libgl1-nvidia-glx-i386 340.101-1 i386 NVIDIA binary OpenGL/GLX 32-bit libraries ii libgles1-nvidia:amd64 340.101-1 amd64 NVIDIA binary OpenGL|ES 1.x library ii libgles2-nvidia:amd64 340.101-1 amd64 NVIDIA binary OpenGL|ES 2.x library rc libnppc6.0:amd64 6.0.37-5 amd64 NVIDIA Performance Primitives core runtime library rc libnppi6.0:amd64 6.0.37-5 amd64 NVIDIA Performance Primitives for image processing runtime library rc libnpps6.0:amd64 6.0.37-5 amd64 NVIDIA Performance Primitives for signal processing runtime library ii libnvcuvid1:amd64 340.101-1 amd64 NVIDIA CUDA Video Decoder runtime library ii libnvidia-eglcore:amd64 340.101-1 amd64 NVIDIA binary EGL core libraries ii libnvidia-encode1:amd64 340.101-1 amd64 NVENC Video Encoding runtime library ii libnvidia-ml1:amd64 340.101-1 amd64 NVIDIA Management Library (NVML) runtime library ii libnvidia-ml1:i386 340.101-1 i386 NVIDIA Management Library (NVML) runtime library rc libnvtoolsext1:amd64 6.0.37-5 amd64 NVIDIA Tools Extension Library rc libnvvm2:amd64 6.0.37-5 amd64 NVIDIA NVVM Library ii nvidia-alternative 340.101-1 amd64 allows the selection of NVIDIA as GLX provider ii nvidia-cg-dev:amd64 3.1.0013-2 amd64 Cg Toolkit - GPU Shader Authoring Language (headers) ii nvidia-cg-toolkit 3.1.0013-2 amd64 Cg Toolkit - GPU Shader Authoring Language rc nvidia-cuda-toolkit 6.0.37-5 amd64 NVIDIA CUDA development toolkit ii nvidia-driver 340.101-1 amd64 NVIDIA metapackage ii nvidia-driver-bin 340.101-1 amd64 NVIDIA driver support binaries ii nvidia-installer-cleanup 20141201+1 amd64 cleanup after driver installation with the nvidia-installer ii nvidia-kernel-common 20141201+1 amd64 NVIDIA binary kernel module support files ii nvidia-kernel-dkms 340.101-1 amd64 NVIDIA binary kernel module DKMS source ii nvidia-modprobe 340.46-1 amd64 utility to load NVIDIA kernel modules and create device nodes ii nvidia-settings 340.46-2 amd64 tool for configuring the NVIDIA graphics driver ii nvidia-smi 340.101-1 i386 NVIDIA System Management Interface ii nvidia-support 20141201+1 amd64 NVIDIA binary graphics driver support files ii nvidia-vdpau-driver:amd64 340.101-1 amd64 Video Decode and Presentation API for Unix - NVIDIA driver ii primus 0~20140711-1 amd64 client-side GPU offloading for NVIDIA Optimus ii xserver-xorg-video-nvidia 340.101-1 amd64 NVIDIA binary Xorg driver
Offline
apt-cache policy
P.S. Tu się chyba nie można podpinać pod cudze wątki.
Ostatnio edytowany przez arecki (2017-03-14 16:10:02)
Offline
Pierwsze nowsze jajo z backportów, a później po restarcie nowsze stery z backportów.
Offline
# apt-cache policy Plików pakietów: 100 /var/lib/dpkg/status release a=now 750 http://deb.opera.com/opera/ stable/non-free i386 Packages release o=Opera Software ASA,a=stable,n=stable,l=The Opera web browser,c=non-free origin deb.opera.com 750 http://deb.opera.com/opera/ stable/non-free amd64 Packages release o=Opera Software ASA,a=stable,n=stable,l=The Opera web browser,c=non-free origin deb.opera.com 750 https://deb.opera.com/opera-developer/ stable/non-free i386 Packages release o=Opera Software ASA,a=stable,n=stable,l=The Opera web browser,c=non-free origin deb.opera.com 750 https://deb.opera.com/opera-developer/ stable/non-free amd64 Packages release o=Opera Software ASA,a=stable,n=stable,l=The Opera web browser,c=non-free origin deb.opera.com 750 http://dl.google.com/linux/chrome/deb/ stable/main amd64 Packages release v=1.0,o=Google, Inc.,a=stable,n=stable,l=Google,c=main origin dl.google.com 500 file:/var/cuda-repo-7-5-local/ Packages release o=NVIDIA,l=NVIDIA CUDA,c= 500 http://www.deb-multimedia.org/ jessie/non-free Translation-en 500 http://www.deb-multimedia.org/ jessie/main Translation-en 750 http://www.deb-multimedia.org/ jessie/non-free i386 Packages release v=8.7,o=Unofficial Multimedia Packages,a=stable,n=jessie,l=Unofficial Multimedia Packages,c=non-free origin www.deb-multimedia.org 750 http://www.deb-multimedia.org/ jessie/main i386 Packages release v=8.7,o=Unofficial Multimedia Packages,a=stable,n=jessie,l=Unofficial Multimedia Packages,c=main origin www.deb-multimedia.org 750 http://www.deb-multimedia.org/ jessie/non-free amd64 Packages release v=8.7,o=Unofficial Multimedia Packages,a=stable,n=jessie,l=Unofficial Multimedia Packages,c=non-free origin www.deb-multimedia.org 750 http://www.deb-multimedia.org/ jessie/main amd64 Packages release v=8.7,o=Unofficial Multimedia Packages,a=stable,n=jessie,l=Unofficial Multimedia Packages,c=main origin www.deb-multimedia.org 500 http://security.debian.org/ jessie/updates/non-free Translation-en 500 http://security.debian.org/ jessie/updates/main Translation-en 500 http://security.debian.org/ jessie/updates/contrib Translation-en 1000 http://security.debian.org/ jessie/updates/non-free i386 Packages release v=8,o=Debian,a=stable,n=jessie,l=Debian-Security,c=non-free origin security.debian.org 1000 http://security.debian.org/ jessie/updates/contrib i386 Packages release v=8,o=Debian,a=stable,n=jessie,l=Debian-Security,c=contrib origin security.debian.org 1000 http://security.debian.org/ jessie/updates/main i386 Packages release v=8,o=Debian,a=stable,n=jessie,l=Debian-Security,c=main origin security.debian.org 1000 http://security.debian.org/ jessie/updates/non-free amd64 Packages release v=8,o=Debian,a=stable,n=jessie,l=Debian-Security,c=non-free origin security.debian.org 1000 http://security.debian.org/ jessie/updates/contrib amd64 Packages release v=8,o=Debian,a=stable,n=jessie,l=Debian-Security,c=contrib origin security.debian.org 1000 http://security.debian.org/ jessie/updates/main amd64 Packages release v=8,o=Debian,a=stable,n=jessie,l=Debian-Security,c=main origin security.debian.org 500 http://http.debian.net/debian/ jessie-backports/non-free Translation-en 500 http://http.debian.net/debian/ jessie-backports/main Translation-en 500 http://http.debian.net/debian/ jessie-backports/contrib Translation-en 100 http://http.debian.net/debian/ jessie-backports/non-free i386 Packages release o=Debian Backports,a=jessie-backports,n=jessie-backports,l=Debian Backports,c=non-free origin http.debian.net 100 http://http.debian.net/debian/ jessie-backports/contrib i386 Packages release o=Debian Backports,a=jessie-backports,n=jessie-backports,l=Debian Backports,c=contrib origin http.debian.net 100 http://http.debian.net/debian/ jessie-backports/main i386 Packages release o=Debian Backports,a=jessie-backports,n=jessie-backports,l=Debian Backports,c=main origin http.debian.net 100 http://http.debian.net/debian/ jessie-backports/non-free amd64 Packages release o=Debian Backports,a=jessie-backports,n=jessie-backports,l=Debian Backports,c=non-free origin http.debian.net 100 http://http.debian.net/debian/ jessie-backports/contrib amd64 Packages release o=Debian Backports,a=jessie-backports,n=jessie-backports,l=Debian Backports,c=contrib origin http.debian.net 100 http://http.debian.net/debian/ jessie-backports/main amd64 Packages release o=Debian Backports,a=jessie-backports,n=jessie-backports,l=Debian Backports,c=main origin http.debian.net 500 http://ftp.pl.debian.org/debian/ jessie/non-free Translation-en 500 http://ftp.pl.debian.org/debian/ jessie/main Translation-pl 500 http://ftp.pl.debian.org/debian/ jessie/main Translation-en 500 http://ftp.pl.debian.org/debian/ jessie/contrib Translation-en 750 http://ftp.pl.debian.org/debian/ jessie/non-free i386 Packages release v=8.7,o=Debian,a=stable,n=jessie,l=Debian,c=non-free origin ftp.pl.debian.org 750 http://ftp.pl.debian.org/debian/ jessie/contrib i386 Packages release v=8.7,o=Debian,a=stable,n=jessie,l=Debian,c=contrib origin ftp.pl.debian.org 750 http://ftp.pl.debian.org/debian/ jessie/main i386 Packages release v=8.7,o=Debian,a=stable,n=jessie,l=Debian,c=main origin ftp.pl.debian.org 750 http://ftp.pl.debian.org/debian/ jessie/non-free amd64 Packages release v=8.7,o=Debian,a=stable,n=jessie,l=Debian,c=non-free origin ftp.pl.debian.org 750 http://ftp.pl.debian.org/debian/ jessie/contrib amd64 Packages release v=8.7,o=Debian,a=stable,n=jessie,l=Debian,c=contrib origin ftp.pl.debian.org 750 http://ftp.pl.debian.org/debian/ jessie/main amd64 Packages release v=8.7,o=Debian,a=stable,n=jessie,l=Debian,c=main origin ftp.pl.debian.org Przypięte pakiety:
Offline
[quote=jawojx]Pierwsze nowsze jajo z backportów, a później po restarcie nowsze stery z backportów.[/quote]
Czyli dla sterów z backportów konieczne jest też jajo z backportów (4.9+79~bpo8+1)? Tylko dlaczego nie ma na ten temat informacji w wiki debiana? Tam zresztą w sekcji instalacji sterów nvidii z backportów jest alternatywa - standardowe jądro jessie, czyli 3.16, albo jądro z backportów.
Co daje w tym przypadku nowsze jądro?
Offline
Jeżeli ci tak zależy na starym kernelu to odinstaluj stare sterowniki i spróbuj zainstalować nowe z backporów, może moduły budują się prawidłowo, jak zostawili w opisie to powinny. Ja tego na szybko nie sprawdzę bo od paru miesięcy jestem już na Debianie 9, ale wydaje mi się że już ze sterownikami 360 były problemy z tym kernelem, tylko to pewnie też była starsza wersja 3.16. Nic się nie stanie jak spróbujesz, jak nie wyjdzie doinstalujesz nowsze jajo.
apt-get purge nvidia-*
A potem to już wiesz.
Offline
Time (s) | Query |
---|---|
0.00010 | SET CHARSET latin2 |
0.00004 | SET NAMES latin2 |
0.00100 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.22.70.169' WHERE u.id=1 |
0.00075 | REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '3.22.70.169', 1732755226) |
0.00045 | SELECT * FROM punbb_online WHERE logged<1732754926 |
0.00052 | SELECT topic_id FROM punbb_posts WHERE id=306789 |
0.00283 | SELECT id FROM punbb_posts WHERE topic_id=29132 ORDER BY posted |
0.00078 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=29132 AND t.moved_to IS NULL |
0.00006 | SELECT search_for, replace_with FROM punbb_censoring |
0.00442 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=29132 ORDER BY p.id LIMIT 0,25 |
0.00089 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=29132 |
Total query time: 0.01184 s |