Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#1  2017-02-18 01:31:16

  Merle - Nowy użytkownik

Merle
Nowy użytkownik
Zarejestrowany: 2017-02-17

debian/xfce4 nvidia Xorg nie działa

Witam,
szukałem, kombinowałem, reinstalowałem... wiedza coraz większa a efektów brak.
otóż:
po zainstalowaniu drivera nvidia-driver  375.26-2 Xorg nie startuje... a właściwie startuje lecz go nie widać ;)
jakkolwiek dziwnie by to nie brzmiało, to jednak jest pewna różnica jeśli coś przestaje działać, lub działa dalej.

uparłem sie trochę na te drivery od NVIDII z powodu openGL jakoś przy nouveau jest gorzej (gracze bywają wybredni).

mój xorg.conf, bez tego Xorg działa, ale bez nvidii i bez openGL

Kod:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:  version 375.26  (buildd@debian)  Fri Jan 13 02:38:29 UTC 2017

Section "ServerLayout"
    Identifier     "Layout0"
    Screen      0  "Screen0"
EndSection

Section "Files"
EndSection

Section "Monitor"
    Identifier     "eDP-1"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Monitor"
    Identifier     "HDMI-1"
    VendorName     "Unknown"
    ModelName      "Unknown"
    HorizSync       28.0 - 33.0
    VertRefresh     43.0 - 72.0
    Option         "DPMS"
EndSection

Section "Device"
    Identifier     "GeForce GT 755M"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BusId       "PCI:1:0:0"
EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "GeForce GT 755M"
    #Monitor        "HDMI-1"
    Monitor       "eDP-1"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
    EndSubSection
EndSection

log Xorg.1.log po startx

Kod:

[   355.315] 
X.Org X Server 1.19.1
Release Date: 2017-01-11
[   355.316] X Protocol Version 11, Revision 0
[   355.317] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[   355.317] Current Operating System: Linux merlap 4.9.0-1-amd64 #1 SMP Debian 4.9.6-3 (2017-01-28) x86_64
[   355.317] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-1-amd64 root=UUID=ccc56ec1-a850-4ecf-afb7-c0bb7dca489e ro quiet splash
[   355.318] Build Date: 20 January 2017  02:50:48AM
[   355.319] xorg-server 2:1.19.1-4 (https://www.debian.org/support) 
[   355.319] Current version of pixman: 0.34.0
[   355.321]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[   355.321] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   355.324] (==) Log file: "/var/log/Xorg.1.log", Time: Sat Feb 18 00:50:13 2017
[   355.325] (==) Using config file: "/etc/X11/xorg.conf"
[   355.326] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   355.326] (==) ServerLayout "Layout0"
[   355.326] (**) |-->Screen "Screen0" (0)
[   355.326] (**) |   |-->Monitor "eDP-1"
[   355.326] (**) |   |-->Device "GeForce GT 755M"
[   355.326] (==) Automatically adding devices
[   355.326] (==) Automatically enabling devices
[   355.326] (==) Automatically adding GPU devices
[   355.326] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   355.326] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   355.326]     Entry deleted from font path.
[   355.326] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[   355.326] (==) ModulePath set to "/usr/lib/xorg/modules"
[   355.326] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[   355.326] (II) Loader magic: 0x55f788c97e00
[   355.326] (II) Module ABI versions:
[   355.326]     X.Org ANSI C Emulation: 0.4
[   355.326]     X.Org Video Driver: 23.0
[   355.326]     X.Org XInput driver : 24.1
[   355.326]     X.Org Server Extension : 10.0
[   355.327] (++) using VT number 2

[   355.328] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_33
[   355.329] (II) xfree86: Adding drm device (/dev/dri/card1)
[   355.329] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 11 paused 0
[   355.329] (II) xfree86: Adding drm device (/dev/dri/card0)
[   355.329] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 12 paused 0
[   355.330] (--) PCI:*(0:0:2:0) 8086:0416:17aa:3801 rev 6, Mem @ 0xc2000000/4194304, 0xb0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[   355.330] (--) PCI: (0:1:0:0) 10de:0fcd:17aa:3801 rev 161, Mem @ 0xc0000000/16777216, 0x90000000/268435456, 0xa0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[   355.330] (II) LoadModule: "glx"
[   355.330] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[   355.333] (II) Module glx: vendor="NVIDIA Corporation"
[   355.333]     compiled for 4.0.2, module version = 1.0.0
[   355.333]     Module class: X.Org Server Extension
[   355.333] (II) NVIDIA GLX Module  375.26  Thu Dec  8 17:59:51 PST 2016
[   355.333] (II) LoadModule: "nvidia"
[   355.333] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[   355.333] (II) Module nvidia: vendor="NVIDIA Corporation"
[   355.333]     compiled for 4.0.2, module version = 1.0.0
[   355.333]     Module class: X.Org Video Driver
[   355.333] (II) NVIDIA dlloader X Driver  375.26  Thu Dec  8 17:37:15 PST 2016
[   355.333] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   355.333] (II) systemd-logind: releasing fd for 226:1
[   355.334] (II) Loading sub module "fb"
[   355.334] (II) LoadModule: "fb"
[   355.334] (II) Loading /usr/lib/xorg/modules/libfb.so
[   355.334] (II) Module fb: vendor="X.Org Foundation"
[   355.334]     compiled for 1.19.1, module version = 1.0.0
[   355.334]     ABI class: X.Org ANSI C Emulation, version 0.4
[   355.334] (II) Loading sub module "wfb"
[   355.334] (II) LoadModule: "wfb"
[   355.334] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   355.334] (II) Module wfb: vendor="X.Org Foundation"
[   355.334]     compiled for 1.19.1, module version = 1.0.0
[   355.334]     ABI class: X.Org ANSI C Emulation, version 0.4
[   355.334] (II) Loading sub module "ramdac"
[   355.334] (II) LoadModule: "ramdac"
[   355.334] (II) Module "ramdac" already built-in
[   355.334] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[   355.334] (==) NVIDIA(0): RGB weight 888
[   355.334] (==) NVIDIA(0): Default visual is TrueColor
[   355.334] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[   355.334] (**) NVIDIA(0): Enabling 2D acceleration
[   355.337] (II) NVIDIA(0): NVIDIA GPU GeForce GT 755M (GK107) at PCI:1:0:0 (GPU-0)
[   355.337] (--) NVIDIA(0): Memory: 2097152 kBytes
[   355.337] (--) NVIDIA(0): VideoBIOS: 80.07.a8.00.0f
[   355.337] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[   355.337] (II) NVIDIA(0): Validated MetaModes:
[   355.337] (II) NVIDIA(0):     "NULL"
[   355.337] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[   355.337] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[   355.337] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[   355.337] (--) Depth 24 pixmap format is 32 bpp
[   355.338] (II) NVIDIA: Using 12288.00 MB of virtual memory for indirect memory
[   355.338] (II) NVIDIA:     access.
[   355.362] (II) NVIDIA(0): Built-in logo is bigger than the screen.
[   355.363] (II) NVIDIA(0): Setting mode "NULL"
[   355.368] (==) NVIDIA(0): Disabling shared memory pixmaps
[   355.368] (==) NVIDIA(0): Backing store enabled
[   355.368] (==) NVIDIA(0): Silken mouse enabled
[   355.368] (**) NVIDIA(0): DPMS enabled
[   355.368] (II) Loading sub module "dri2"
[   355.368] (II) LoadModule: "dri2"
[   355.368] (II) Module "dri2" already built-in
[   355.368] (II) NVIDIA(0): [DRI2] Setup complete
[   355.368] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[   355.368] (--) RandR disabled
[   355.370] (II) SELinux: Disabled on system
[   355.370] (II) Initializing extension GLX
[   355.370] (II) Indirect GLX disabled.
[   355.397] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[   355.397] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   355.397] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   355.397] (II) LoadModule: "libinput"
[   355.397] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   355.398] (II) Module libinput: vendor="X.Org Foundation"
[   355.398]     compiled for 1.19.0, module version = 0.23.0
[   355.398]     Module class: X.Org XInput Driver
[   355.398]     ABI class: X.Org XInput driver, version 24.1
[   355.398] (II) Using input driver 'libinput' for 'Power Button'
[   355.399] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 37 paused 0
[   355.399] (**) Power Button: always reports core events
[   355.399] (**) Option "Device" "/dev/input/event4"
[   355.399] (**) Option "_source" "server/udev"
[   355.399] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[   355.399] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[   355.399] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[   355.399] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   355.399] (**) Option "xkb_model" "pc105"
[   355.399] (**) Option "xkb_layout" "pl"
[   355.410] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[   355.410] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[   355.410] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[   355.410] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   355.410] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   355.410] (II) Using input driver 'libinput' for 'Video Bus'
[   355.410] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 40 paused 0
[   355.410] (**) Video Bus: always reports core events
[   355.410] (**) Option "Device" "/dev/input/event6"
[   355.410] (**) Option "_source" "server/udev"
[   355.411] (II) input device 'Video Bus', /dev/input/event6 is tagged by udev as: Keyboard
[   355.411] (II) input device 'Video Bus', /dev/input/event6 is a keyboard
[   355.411] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8/event6"
[   355.411] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   355.411] (**) Option "xkb_model" "pc105"
[   355.411] (**) Option "xkb_layout" "pl"
[   355.411] (II) input device 'Video Bus', /dev/input/event6 is tagged by udev as: Keyboard
[   355.411] (II) input device 'Video Bus', /dev/input/event6 is a keyboard
[   355.411] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[   355.411] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   355.411] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   355.411] (II) Using input driver 'libinput' for 'Power Button'
[   355.411] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 41 paused 0
[   355.412] (**) Power Button: always reports core events
[   355.412] (**) Option "Device" "/dev/input/event1"
[   355.412] (**) Option "_source" "server/udev"
[   355.412] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[   355.412] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[   355.412] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input2/event1"
[   355.412] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   355.412] (**) Option "xkb_model" "pc105"
[   355.412] (**) Option "xkb_layout" "pl"
[   355.412] (II) input device 'Power Button', /dev/input/event1 is tagged by udev as: Keyboard
[   355.412] (II) input device 'Power Button', /dev/input/event1 is a keyboard
[   355.412] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[   355.412] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   355.412] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[   355.412] (II) Using input driver 'libinput' for 'Sleep Button'
[   355.413] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 42 paused 0
[   355.413] (**) Sleep Button: always reports core events
[   355.413] (**) Option "Device" "/dev/input/event2"
[   355.413] (**) Option "_source" "server/udev"
[   355.413] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[   355.413] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[   355.413] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input3/event2"
[   355.413] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[   355.413] (**) Option "xkb_model" "pc105"
[   355.413] (**) Option "xkb_layout" "pl"
[   355.413] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[   355.413] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[   355.413] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[   355.413] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[   355.413] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   355.413] (II) Using input driver 'libinput' for 'Video Bus'
[   355.414] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 43 paused 0
[   355.414] (**) Video Bus: always reports core events
[   355.414] (**) Option "Device" "/dev/input/event5"
[   355.414] (**) Option "_source" "server/udev"
[   355.414] (II) input device 'Video Bus', /dev/input/event5 is tagged by udev as: Keyboard
[   355.414] (II) input device 'Video Bus', /dev/input/event5 is a keyboard
[   355.414] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:4c/LNXVIDEO:00/input/input7/event5"
[   355.414] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 10)
[   355.414] (**) Option "xkb_model" "pc105"
[   355.414] (**) Option "xkb_layout" "pl"
[   355.414] (II) input device 'Video Bus', /dev/input/event5 is tagged by udev as: Keyboard
[   355.414] (II) input device 'Video Bus', /dev/input/event5 is a keyboard
[   355.414] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[   355.414] (II) No input driver specified, ignoring this device.
[   355.414] (II) This device may have been added with another device file.
[   355.415] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event15)
[   355.415] (II) No input driver specified, ignoring this device.
[   355.415] (II) This device may have been added with another device file.
[   355.415] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event16)
[   355.415] (II) No input driver specified, ignoring this device.
[   355.415] (II) This device may have been added with another device file.
[   355.415] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event17)
[   355.415] (II) No input driver specified, ignoring this device.
[   355.415] (II) This device may have been added with another device file.
[   355.415] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event21)
[   355.415] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
[   355.415] (**) Lenovo EasyCamera: Applying InputClass "libinput keyboard catchall"
[   355.415] (II) Using input driver 'libinput' for 'Lenovo EasyCamera'
[   355.416] (II) systemd-logind: got fd for /dev/input/event21 13:85 fd 44 paused 0
[   355.416] (**) Lenovo EasyCamera: always reports core events
[   355.416] (**) Option "Device" "/dev/input/event21"
[   355.416] (**) Option "_source" "server/udev"
[   355.416] (II) input device 'Lenovo EasyCamera', /dev/input/event21 is tagged by udev as: Keyboard
[   355.416] (II) input device 'Lenovo EasyCamera', /dev/input/event21 is a keyboard
[   355.416] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/input/input22/event21"
[   355.416] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 11)
[   355.416] (**) Option "xkb_model" "pc105"
[   355.416] (**) Option "xkb_layout" "pl"
[   355.416] (II) input device 'Lenovo EasyCamera', /dev/input/event21 is tagged by udev as: Keyboard
[   355.416] (II) input device 'Lenovo EasyCamera', /dev/input/event21 is a keyboard
[   355.417] (II) config/udev: Adding input device LXD Gaming Mouse (/dev/input/event8)
[   355.417] (**) LXD Gaming Mouse: Applying InputClass "evdev keyboard catchall"
[   355.417] (**) LXD Gaming Mouse: Applying InputClass "libinput keyboard catchall"
[   355.417] (II) Using input driver 'libinput' for 'LXD Gaming Mouse'
[   355.417] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 45 paused 0
[   355.417] (**) LXD Gaming Mouse: always reports core events
[   355.417] (**) Option "Device" "/dev/input/event8"
[   355.417] (**) Option "_source" "server/udev"
[   355.417] (II) input device 'LXD Gaming Mouse', /dev/input/event8 is tagged by udev as: Keyboard
[   355.417] (II) input device 'LXD Gaming Mouse', /dev/input/event8 is a keyboard
[   355.417] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:1D57:AD03.0001/input/input9/event8"
[   355.417] (II) XINPUT: Adding extended input device "LXD Gaming Mouse" (type: KEYBOARD, id 12)
[   355.417] (**) Option "xkb_model" "pc105"
[   355.417] (**) Option "xkb_layout" "pl"
[   355.418] (II) input device 'LXD Gaming Mouse', /dev/input/event8 is tagged by udev as: Keyboard
[   355.418] (II) input device 'LXD Gaming Mouse', /dev/input/event8 is a keyboard
[   355.418] (II) config/udev: Adding input device LXD Gaming Mouse (/dev/input/event9)
[   355.418] (**) LXD Gaming Mouse: Applying InputClass "evdev pointer catchall"
[   355.418] (**) LXD Gaming Mouse: Applying InputClass "evdev keyboard catchall"
[   355.418] (**) LXD Gaming Mouse: Applying InputClass "libinput pointer catchall"
[   355.418] (**) LXD Gaming Mouse: Applying InputClass "libinput keyboard catchall"
[   355.418] (II) Using input driver 'libinput' for 'LXD Gaming Mouse'
[   355.418] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 46 paused 0
[   355.418] (**) LXD Gaming Mouse: always reports core events
[   355.418] (**) Option "Device" "/dev/input/event9"
[   355.418] (**) Option "_source" "server/udev"
[   355.419] (II) input device 'LXD Gaming Mouse', /dev/input/event9 is tagged by udev as: Keyboard Mouse
[   355.419] (II) input device 'LXD Gaming Mouse', /dev/input/event9 is a pointer caps
[   355.419] (II) input device 'LXD Gaming Mouse', /dev/input/event9 is a keyboard
[   355.419] (II) libinput: LXD Gaming Mouse: needs a virtual subdevice
[   355.419] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:1D57:AD03.0002/input/input10/event9"
[   355.419] (II) XINPUT: Adding extended input device "LXD Gaming Mouse" (type: MOUSE, id 13)
[   355.419] (**) Option "AccelerationScheme" "none"
[   355.419] (**) LXD Gaming Mouse: (accel) selected scheme none/0
[   355.419] (**) LXD Gaming Mouse: (accel) acceleration factor: 2.000
[   355.419] (**) LXD Gaming Mouse: (accel) acceleration threshold: 4
[   355.419] (II) input device 'LXD Gaming Mouse', /dev/input/event9 is tagged by udev as: Keyboard Mouse
[   355.419] (II) input device 'LXD Gaming Mouse', /dev/input/event9 is a pointer caps
[   355.419] (II) input device 'LXD Gaming Mouse', /dev/input/event9 is a keyboard
[   355.419] (II) config/udev: Adding input device LXD Gaming Mouse (/dev/input/mouse1)
[   355.419] (II) No input driver specified, ignoring this device.
[   355.419] (II) This device may have been added with another device file.
[   355.419] (II) config/udev: Adding input device NOVATEK USB Keyboard (/dev/input/event10)
[   355.419] (**) NOVATEK USB Keyboard: Applying InputClass "evdev keyboard catchall"
[   355.419] (**) NOVATEK USB Keyboard: Applying InputClass "libinput keyboard catchall"
[   355.419] (II) Using input driver 'libinput' for 'NOVATEK USB Keyboard'
[   355.420] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 47 paused 0
[   355.420] (**) NOVATEK USB Keyboard: always reports core events
[   355.420] (**) Option "Device" "/dev/input/event10"
[   355.420] (**) Option "_source" "server/udev"
[   355.420] (II) input device 'NOVATEK USB Keyboard', /dev/input/event10 is tagged by udev as: Keyboard
[   355.420] (II) input device 'NOVATEK USB Keyboard', /dev/input/event10 is a keyboard
[   355.420] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:0461:0010.0003/input/input11/event10"
[   355.420] (II) XINPUT: Adding extended input device "NOVATEK USB Keyboard" (type: KEYBOARD, id 14)
[   355.420] (**) Option "xkb_model" "pc105"
[   355.420] (**) Option "xkb_layout" "pl"
[   355.420] (II) input device 'NOVATEK USB Keyboard', /dev/input/event10 is tagged by udev as: Keyboard
[   355.420] (II) input device 'NOVATEK USB Keyboard', /dev/input/event10 is a keyboard
[   355.421] (II) config/udev: Adding input device NOVATEK USB Keyboard (/dev/input/event11)
[   355.421] (**) NOVATEK USB Keyboard: Applying InputClass "evdev keyboard catchall"
[   355.421] (**) NOVATEK USB Keyboard: Applying InputClass "libinput keyboard catchall"
[   355.421] (II) Using input driver 'libinput' for 'NOVATEK USB Keyboard'
[   355.421] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 48 paused 0
[   355.421] (**) NOVATEK USB Keyboard: always reports core events
[   355.421] (**) Option "Device" "/dev/input/event11"
[   355.421] (**) Option "_source" "server/udev"
[   355.421] (II) input device 'NOVATEK USB Keyboard', /dev/input/event11 is tagged by udev as: Keyboard
[   355.421] (II) input device 'NOVATEK USB Keyboard', /dev/input/event11 is a keyboard
[   355.421] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.1/0003:0461:0010.0004/input/input12/event11"
[   355.421] (II) XINPUT: Adding extended input device "NOVATEK USB Keyboard" (type: KEYBOARD, id 15)
[   355.421] (**) Option "xkb_model" "pc105"
[   355.421] (**) Option "xkb_layout" "pl"
[   355.422] (II) input device 'NOVATEK USB Keyboard', /dev/input/event11 is tagged by udev as: Keyboard
[   355.422] (II) input device 'NOVATEK USB Keyboard', /dev/input/event11 is a keyboard
[   355.422] (II) config/udev: Adding input device Creative Technology Ltd. SB Tactic3D Rage Wireless (/dev/input/event12)
[   355.422] (**) Creative Technology Ltd. SB Tactic3D Rage Wireless: Applying InputClass "evdev keyboard catchall"
[   355.422] (**) Creative Technology Ltd. SB Tactic3D Rage Wireless: Applying InputClass "libinput keyboard catchall"
[   355.422] (II) Using input driver 'libinput' for 'Creative Technology Ltd. SB Tactic3D Rage Wireless'
[   355.422] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 49 paused 0
[   355.423] (**) Creative Technology Ltd. SB Tactic3D Rage Wireless: always reports core events
[   355.423] (**) Option "Device" "/dev/input/event12"
[   355.423] (**) Option "_source" "server/udev"
[   355.423] (II) input device 'Creative Technology Ltd. SB Tactic3D Rage Wireless', /dev/input/event12 is tagged by udev as: Keyboard
[   355.423] (II) input device 'Creative Technology Ltd. SB Tactic3D Rage Wireless', /dev/input/event12 is a keyboard
[   355.423] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.3/0003:041E:3225.0005/input/input13/event12"
[   355.423] (II) XINPUT: Adding extended input device "Creative Technology Ltd. SB Tactic3D Rage Wireless" (type: KEYBOARD, id 16)
[   355.423] (**) Option "xkb_model" "pc105"
[   355.423] (**) Option "xkb_layout" "pl"
[   355.423] (II) input device 'Creative Technology Ltd. SB Tactic3D Rage Wireless', /dev/input/event12 is tagged by udev as: Keyboard
[   355.423] (II) input device 'Creative Technology Ltd. SB Tactic3D Rage Wireless', /dev/input/event12 is a keyboard
[   355.423] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event18)
[   355.423] (II) No input driver specified, ignoring this device.
[   355.423] (II) This device may have been added with another device file.
[   355.423] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event19)
[   355.423] (II) No input driver specified, ignoring this device.
[   355.423] (II) This device may have been added with another device file.
[   355.423] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event20)
[   355.424] (II) No input driver specified, ignoring this device.
[   355.424] (II) This device may have been added with another device file.
[   355.424] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event13)
[   355.424] (**) Ideapad extra buttons: Applying InputClass "evdev keyboard catchall"
[   355.424] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[   355.424] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[   355.424] (II) systemd-logind: got fd for /dev/input/event13 13:77 fd 50 paused 0
[   355.424] (**) Ideapad extra buttons: always reports core events
[   355.424] (**) Option "Device" "/dev/input/event13"
[   355.424] (**) Option "_source" "server/udev"
[   355.424] (II) input device 'Ideapad extra buttons', /dev/input/event13 is tagged by udev as: Keyboard
[   355.424] (II) input device 'Ideapad extra buttons', /dev/input/event13 is a keyboard
[   355.424] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input14/event13"
[   355.424] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 17)
[   355.424] (**) Option "xkb_model" "pc105"
[   355.424] (**) Option "xkb_layout" "pl"
[   355.425] (II) input device 'Ideapad extra buttons', /dev/input/event13 is tagged by udev as: Keyboard
[   355.425] (II) input device 'Ideapad extra buttons', /dev/input/event13 is a keyboard
[   355.425] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[   355.425] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[   355.425] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[   355.425] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[   355.425] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 51 paused 0
[   355.425] (**) AT Translated Set 2 keyboard: always reports core events
[   355.425] (**) Option "Device" "/dev/input/event0"
[   355.425] (**) Option "_source" "server/udev"
[   355.425] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[   355.425] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[   355.425] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[   355.425] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 18)
[   355.425] (**) Option "xkb_model" "pc105"
[   355.426] (**) Option "xkb_layout" "pl"
[   355.426] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[   355.426] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[   355.426] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event7)
[   355.426] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[   355.426] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[   355.426] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad catchall"
[   355.426] (**) ETPS/2 Elantech Touchpad: Applying InputClass "Default clickpad buttons"
[   355.426] (II) LoadModule: "synaptics"
[   355.426] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[   355.426] (II) Module synaptics: vendor="X.Org Foundation"
[   355.426]     compiled for 1.19.0, module version = 1.9.0
[   355.426]     Module class: X.Org XInput Driver
[   355.426]     ABI class: X.Org XInput driver, version 24.1
[   355.426] (II) Using input driver 'synaptics' for 'ETPS/2 Elantech Touchpad'
[   355.427] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 52 paused 0
[   355.427] (**) ETPS/2 Elantech Touchpad: always reports core events
[   355.427] (**) Option "Device" "/dev/input/event7"
[   355.427] (II) synaptics: ETPS/2 Elantech Touchpad: found clickpad property
[   355.427] (--) synaptics: ETPS/2 Elantech Touchpad: x-axis range 0 - 3260 (res 33)
[   355.427] (--) synaptics: ETPS/2 Elantech Touchpad: y-axis range 0 - 2119 (res 33)
[   355.427] (--) synaptics: ETPS/2 Elantech Touchpad: pressure range 0 - 255
[   355.427] (--) synaptics: ETPS/2 Elantech Touchpad: finger width range 0 - 15
[   355.427] (--) synaptics: ETPS/2 Elantech Touchpad: buttons: left double triple
[   355.427] (--) synaptics: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[   355.427] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[   355.427] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[   355.427] (**) ETPS/2 Elantech Touchpad: always reports core events
[   355.427] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event7"
[   355.427] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 19)
[   355.427] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[   355.427] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) MaxSpeed is now 1.75
[   355.427] (**) synaptics: ETPS/2 Elantech Touchpad: (accel) AccelFactor is now 0.051
[   355.427] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[   355.427] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 1
[   355.427] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[   355.427] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[   355.427] (--) synaptics: ETPS/2 Elantech Touchpad: touchpad found
[   355.427] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[   355.427] (**) ETPS/2 Elantech Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[   355.427] (II) config/udev: Adding input device PC Speaker (/dev/input/event14)
[   355.427] (II) No input driver specified, ignoring this device.
[   355.427] (II) This device may have been added with another device file.
[   355.429] (**) LXD Gaming Mouse: Applying InputClass "evdev pointer catchall"
[   355.429] (**) LXD Gaming Mouse: Applying InputClass "evdev keyboard catchall"
[   355.429] (**) LXD Gaming Mouse: Applying InputClass "libinput pointer catchall"
[   355.429] (**) LXD Gaming Mouse: Applying InputClass "libinput keyboard catchall"
[   355.429] (II) Using input driver 'libinput' for 'LXD Gaming Mouse'
[   355.429] (II) systemd-logind: returning pre-existing fd for /dev/input/event9 13:73
[   355.429] (**) LXD Gaming Mouse: always reports core events
[   355.429] (**) Option "Device" "/dev/input/event9"
[   355.429] (**) Option "_source" "_driver/libinput"
[   355.429] (II) libinput: LXD Gaming Mouse: is a virtual subdevice
[   355.429] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:1D57:AD03.0002/input/input10/event9"
[   355.429] (II) XINPUT: Adding extended input device "LXD Gaming Mouse" (type: KEYBOARD, id 20)
[   355.429] (**) Option "xkb_model" "pc105"
[   355.429] (**) Option "xkb_layout" "pl"
[   360.372] (**) Option "fd" "37"
[   360.372] (**) Option "fd" "40"
[   360.372] (**) Option "fd" "41"
[   360.372] (**) Option "fd" "42"
[   360.372] (**) Option "fd" "43"
[   360.372] (**) Option "fd" "44"
[   360.372] (**) Option "fd" "45"
[   360.372] (**) Option "fd" "46"
[   360.372] (**) Option "fd" "47"
[   360.372] (**) Option "fd" "48"
[   360.372] (**) Option "fd" "49"
[   360.372] (**) Option "fd" "50"
[   360.372] (**) Option "fd" "51"
[   360.373] (**) Option "fd" "46"
[   360.430] (II) systemd-logind: got pause for 13:70
[   360.430] (II) systemd-logind: got pause for 13:72
[   360.430] (II) systemd-logind: got pause for 13:73
[   360.430] (II) systemd-logind: got pause for 13:76
[   360.430] (II) systemd-logind: got pause for 13:65
[   360.430] (II) systemd-logind: got pause for 13:68
[   360.430] (II) systemd-logind: got pause for 13:64
[   360.430] (II) systemd-logind: got pause for 226:0
[   360.430] (II) systemd-logind: got pause for 13:71
[   360.430] (II) systemd-logind: got pause for 13:75
[   360.430] (II) systemd-logind: got pause for 13:85
[   360.430] (II) systemd-logind: got pause for 13:74
[   360.430] (II) systemd-logind: got pause for 13:69
[   360.430] (II) systemd-logind: got pause for 13:77
[   360.430] (II) systemd-logind: got pause for 13:66

dziwna sprawa, można np wywołać polecenia (po export DISPLAY=:1.0)
np: [b]glxinfo|grep version[/b] :

Kod:

server glx version string: 1.4
client glx version string: 1.4
GLX version: 1.4
OpenGL core profile version string: 4.5.0 NVIDIA 375.26
OpenGL core profile shading language version string: 4.50 NVIDIA
OpenGL version string: 4.5.0 NVIDIA 375.26
OpenGL shading language version string: 4.50 NVIDIA
OpenGL ES profile version string: OpenGL ES 3.2 NVIDIA 375.26
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20
    GL_EXT_shader_implicit_conversions, GL_EXT_shader_integer_mix,

jednak sam ekran graficzny jest nieosiągalny, polecenia można wykonywać tylko z konsoli, no i w zasadzie tylko przy startx

Kod:

Sparkylinux 4.5

Kod:

Laptop Lenowo Ideapad Y510p

Kod:

merlap:~# uname -a
Linux merlap 4.9.0-1-amd64 #1 SMP Debian 4.9.6-3 (2017-01-28) x86_64 GNU/Linux

Kod:

merlap:~# lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06)
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05)
00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 (rev d5)
00:1c.4 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 (rev d5)
00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05)
00:1f.0 ISA bridge: Intel Corporation HM86 Express LPC Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05)
00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05)
01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 755M] (rev a1)
07:00.0 Ethernet controller: Qualcomm Atheros QCA8171 Gigabit Ethernet (rev 10)
08:00.0 Network controller: Intel Corporation Centrino Wireless-N 2230 (rev c4)

instalacja w zasadzie nówka sztuka (nowa wersja), ciężko się teraz wycofać, chyba że ktoś zaproponuje dystrybucję która zadziała, chociaż niewydaje mi się żeby to był problem w dystrybucji.

Offline

 

#2  2017-02-18 12:28:24

  jawojx - Użytkownik

jawojx
Użytkownik
Zarejestrowany: 2012-10-11

Re: debian/xfce4 nvidia Xorg nie działa

Jakie masz środowisko zainstalowane, a ważniejsze jaki menadżer logowania. Miałem problemy na lightdm przy nowych sterownikach nVidia.
No i może ten xorg.conf sobie zapisz jako backup, a zrób taki prościutki jak tu:
[url]https://wiki.debian.org/NvidiaGraphicsDrivers#Manual[/url]

Ostatnio edytowany przez jawojx (2017-02-18 12:33:37)

Offline

 

#3  2017-02-18 12:36:18

  Bodzio - Ojciec Założyciel

Bodzio
Ojciec Założyciel
Skąd: Gorlice
Zarejestrowany: 2004-04-17
Serwis

Re: debian/xfce4 nvidia Xorg nie działa

Kernel 4.9.0-1 dla 64 bit nie buduje modułu dla nvidii. Zainstaluj kernel z aptosida - powinny skończyć się problemy.
Niedawno to przerabiałem.


Debian jest lepszy niż wszystkie klony
Linux register users: #359018
[img]http://www.freebsd.org/gifs/powerlogo.gif[/img]
[url=https://goo.gl/photos/5XGKFkvaMimLwM2s9]Beskid Niski[/url]

Offline

 

#4  2017-02-18 13:08:00

  jawojx - Użytkownik

jawojx
Użytkownik
Zarejestrowany: 2012-10-11

Re: debian/xfce4 nvidia Xorg nie działa

U mnie moduły dla 4.9.0-1 budują się prawidłowo właśnie sprawdziłem, bo też używam aptosida. Wydaje się że tu moduły ładują się prawidłowo. Z tym co ja napisałem też bywa ciekawie, z nVidią jest różnie zależy od sprzętu/zestawu/sterownika na jednym gdm3, na drugim lightdm potrafi robić problemy.

Ostatnio edytowany przez jawojx (2017-02-18 13:08:42)

Offline

 

#5  2017-02-18 13:44:39

  Merle - Nowy użytkownik

Merle
Nowy użytkownik
Zarejestrowany: 2017-02-17

Re: debian/xfce4 nvidia Xorg nie działa

[quote=jawojx]Jakie masz środowisko zainstalowane, a ważniejsze jaki menadżer logowania. Miałem problemy na lightdm przy nowych sterownikach nVidia.[/quote]
wprawdzie mam ligtdm, ale nie sądzę żeby miało to coś wspólnego, sam Xorg nie działa (startx pomija przecież dm)
[quote=jawojx]No i może ten xorg.conf sobie zapisz jako backup, a zrób taki prościutki jak tu:
[url]https://wiki.debian.org/NvidiaGraphicsDrivers#Manual[/url][/quote]
tego próbowałem, po prostu dowolne włączenie nvidii uniemożliwia używanie Xorg
[quote=Bodzio]Kernel 4.9.0-1 dla 64 bit nie buduje modułu dla nvidii. Zainstaluj kernel z aptosida - powinny skończyć się problemy.
Niedawno to przerabiałem.[/quote]
spróbuję tego (cokolwiek to jest ten aptosid ;) ), poszukam przetestuje, dam znać.

dzięki za sugestie

Offline

 

#6  2017-02-18 14:06:30

  jawojx - Użytkownik

jawojx
Użytkownik
Zarejestrowany: 2012-10-11

Re: debian/xfce4 nvidia Xorg nie działa

[b]Merle[/b] : wprawdzie mam ligtdm, ale nie sądzę żeby miało to coś wspólnego, sam Xorg nie działa (startx pomija przecież dm)[/quote]
No właśnie domyślnie nie. Zrób tak jak mówię. Zainstaluj gmd3 czy kdm czy jakiś prosty jak twoje środowisko nie wymaga, przekonfiguruj, wybierz restartuj system.

Kod:

dpkg-reconfigure gdm3

Nie sprawdzałem czy ten błąd z ligtdm wysteruje na kernelu 4.9.0-8.slh.1-aptosid-amd64 zaraz to sprawdzę, ale to był błąd ligtdm/sterownik nVidia, nie kernela.

No i jest tak, na 4.9.0-8.slh.1-aptosid-amd64 działa z lightdm i  375.26-2 prawidłowo, czyli to co proponował [b]Bodzio[/b] powinno pomóc, nie musi czytaj dalej. Zaraz sprawdzę z Kernelem z Debiana, bo ja miąłem takie same objawy.

No i na kernelu Z Debiana 4.9.0-1-amd64 z lightdm i  375.26-2, też działa. Sprawdzałem na dwóch komputerach teraz. Ale miałem identyczne problemy na kilku laptopach i musiałem zamienić lightdm.

Jak robiłem te próby teraz to jeszcze zobaczyłem czego nie napisałem. Teraz z tym głupkowatym systemd trzeba pamiętać by wyłączyć przed rekonfiguracją lightdm.

Kod:

service lightdm stop

I uruchomić gdm3. ( I tu dopiero po zatrzymaniu lightdm i przed uruchomieniem gdm3 jest możliwość startx bez lightdm na próbę).

Kod:

systemctl start gdm3.service

dopiero przekonfigurować.

Ostatnio edytowany przez jawojx (2017-02-18 15:44:57)

Offline

 

#7  2017-02-18 18:40:12

  Merle - Nowy użytkownik

Merle
Nowy użytkownik
Zarejestrowany: 2017-02-17

Re: debian/xfce4 nvidia Xorg nie działa

pierwszy test kiepsko,
przepięcie na gdm3 z włączonym driverem nVidii skutkuje miganiem ekranu i w zasadzie niemożnoscią zalogowania na konsoli, restart w single.

generalnie gdm3 nawet bez sterowników niechce działać, wywala błąd o niemożności zalogowania i can't resolve (graficznie, nie znalazłem tego w logu)

z pliczkiem minimalnym:

Kod:

Section "Device"
        Identifier "GeForce GT 755M"
        Driver "nvidia"
EndSection

wygląda na to że nie potrafi sobie zbudować konfiguracji X

Kod:

[   156.042] (--) Log file renamed from "/var/lib/gdm3/.local/share/xorg/Xorg.pid-6915.log" to "/var/lib/gdm3/.local/share/xorg/Xorg.0.log"
[   156.042] 
X.Org X Server 1.19.1
Release Date: 2017-01-11
[   156.042] X Protocol Version 11, Revision 0
[   156.042] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[   156.042] Current Operating System: Linux merlap 4.9.0-1-amd64 #1 SMP Debian 4.9.6-3 (2017-01-28) x86_64
[   156.042] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-1-amd64 root=UUID=ccc56ec1-a850-4ecf-afb7-c0bb7dca489e ro quiet splash
[   156.042] Build Date: 20 January 2017  02:50:48AM
[   156.042] xorg-server 2:1.19.1-4 (https://www.debian.org/support) 
[   156.042] Current version of pixman: 0.34.0
[   156.042]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[   156.042] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   156.042] (==) Log file: "/var/lib/gdm3/.local/share/xorg/Xorg.0.log", Time: Sat Feb 18 16:56:11 2017
[   156.042] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   156.042] (==) No Layout section.  Using the first Screen section.
[   156.042] (==) No screen section available. Using defaults.
[   156.042] (**) |-->Screen "Default Screen Section" (0)
[   156.042] (**) |   |-->Monitor "<default monitor>"
[   156.043] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
[   156.043] (**) |   |-->Device "GeForce GT 755M"
[   156.043] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[   156.043] (==) Automatically adding devices
[   156.043] (==) Automatically enabling devices
[   156.043] (==) Automatically adding GPU devices
[   156.043] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   156.043] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   156.043]     Entry deleted from font path.
[   156.043] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[   156.043] (==) ModulePath set to "/usr/lib/xorg/modules"
[   156.043] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[   156.043] (II) Loader magic: 0x557a52981e00
[   156.043] (II) Module ABI versions:
[   156.043]     X.Org ANSI C Emulation: 0.4
[   156.043]     X.Org Video Driver: 23.0
[   156.043]     X.Org XInput driver : 24.1
[   156.043]     X.Org Server Extension : 10.0
[   156.043] (++) using VT number 1

[   156.045] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c120
[   156.046] (II) xfree86: Adding drm device (/dev/dri/card1)
[   156.046] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 12 paused 0
[   156.046] (II) xfree86: Adding drm device (/dev/dri/card0)
[   156.047] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 13 paused 0
[   156.048] (--) PCI:*(0:0:2:0) 8086:0416:17aa:3801 rev 6, Mem @ 0xc2000000/4194304, 0xb0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[   156.048] (--) PCI: (0:1:0:0) 10de:0fcd:17aa:3801 rev 161, Mem @ 0xc0000000/16777216, 0x90000000/268435456, 0xa0000000/33554432, I/O @ 0x00004000/128, BIOS @ 0x????????/524288
[   156.048] (II) LoadModule: "glx"
[   156.048] (II) Loading /usr/lib/xorg/modules/linux/libglx.so
[   156.051] (II) Module glx: vendor="NVIDIA Corporation"
[   156.051]     compiled for 4.0.2, module version = 1.0.0
[   156.051]     Module class: X.Org Server Extension
[   156.051] (II) NVIDIA GLX Module  375.26  Thu Dec  8 17:59:51 PST 2016
[   156.051] (II) LoadModule: "nvidia"
[   156.051] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[   156.051] (II) Module nvidia: vendor="NVIDIA Corporation"
[   156.051]     compiled for 4.0.2, module version = 1.0.0
[   156.051]     Module class: X.Org Video Driver
[   156.051] (II) NVIDIA dlloader X Driver  375.26  Thu Dec  8 17:37:15 PST 2016
[   156.051] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   156.052] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[   156.052] (II) systemd-logind: releasing fd for 226:1
[   156.052] (EE) No devices detected.
[   156.052] (EE) 
Fatal server error:
[   156.052] (EE) no screens found(EE) 
[   156.052] (EE) 
Please consult the The X.Org Foundation support 
     at http://wiki.x.org
 for help. 
[   156.052] (EE) Please also check the log file at "/var/lib/gdm3/.local/share/xorg/Xorg.0.log" for additional information.
[   156.052] (EE) 
[   156.065] (EE) Server terminated with error (1). Closing log file.

czyli trzeba przetestować aptosid, ale pytanie gdzie to pobrac i jak zbudować,
znalazłem [url]https://github.com/fullstory/linux-aptosid/tree/master/debian[/url] ale nigdy nie budowałem jądra w ten sposób,
pierwsza próba (na podstawie tego co zrozumiałem) udowodniła tylko moja niewiedzę w tej materii:

Kod:

merle@merlap:/usr/src/linux-aptosid$ fakeroot make -f debian/rules.gen binary-arch_amd64
make -f debian/rules.real binary-arch-flavour ABINAME='4.9.0-11.slh.1' ARCH='amd64' COMPILER='gcc-6' FEATURESET='none' FLAVOUR='aptosid-amd64' IMAGE_FILE='arch/x86/boot/bzImage' IMAGE_INSTALL_STEM='vmlinuz' KCONFIG='debian/config/config debian/config/amd64/config' KERNEL_ARCH='x86' LOCALVERSION='-aptosid-amd64' LOCALVERSION_HEADERS='' LOCALVERSION_IMAGE='-aptosid-amd64' SOURCEVERSION='4.9-18' UPSTREAMVERSION='4.9' VERSION='4.9'
make[1]: Wejście do katalogu '/usr/src/linux-aptosid'
rm -rf 'debian/build/build_amd64_none_aptosid-amd64'
mkdir 'debian/build/build_amd64_none_aptosid-amd64'
cp 'debian/build/config.amd64_none_aptosid-amd64' 'debian/build/build_amd64_none_aptosid-amd64/.config'
echo 'override ARCH = x86' >> 'debian/build/build_amd64_none_aptosid-amd64/.kernelvariables'
echo 'override KERNELRELEASE = 4.9.0-11.slh.1-aptosid-amd64' >> 'debian/build/build_amd64_none_aptosid-amd64/.kernelvariables'
echo 'CCACHE = ccache' >> 'debian/build/build_amd64_none_aptosid-amd64/.kernelvariables'
echo 'CC = $(if $(DEBIAN_KERNEL_USE_CCACHE),$(CCACHE)) $(CROSS_COMPILE)gcc-6' >> 'debian/build/build_amd64_none_aptosid-amd64/.kernelvariables'
echo 'ifneq ($(DEB_BUILD_ARCH),$(DEB_HOST_ARCH))' >> 'debian/build/build_amd64_none_aptosid-amd64/.kernelvariables'
echo 'override CROSS_COMPILE = $(DEB_HOST_GNU_TYPE)-' >> 'debian/build/build_amd64_none_aptosid-amd64/.kernelvariables'
echo 'endif' >> 'debian/build/build_amd64_none_aptosid-amd64/.kernelvariables'
env -u ABINAME -u ARCH -u FEATURESET -u FLAVOUR -u VERSION -u LOCALVERSION DISTRIBUTION_OFFICIAL_BUILD=1 DISTRIBUTOR="aptosid" DISTRIBUTION_VERSION="4.9-18" KBUILD_BUILD_TIMESTAMP="aptosid 4.9-18 (2017-02-16)" KBUILD_BUILD_USER="s.l-h" KBUILD_BUILD_HOST="gmx.de" make -C 'debian/build/source_none' O='/usr/src/linux-aptosid/debian/build/build_amd64_none_aptosid-amd64' V=1 listnewconfig
make[2]: Entering directory '/usr/src/linux-aptosid'
make[2]: *** No rule to make target 'listnewconfig'.  Stop.
make[2]: Leaving directory '/usr/src/linux-aptosid'
debian/rules.real:95: polecenia dla obiektu 'debian/stamps/setup_amd64_none_aptosid-amd64' nie powiodły się
make[1]: *** [debian/stamps/setup_amd64_none_aptosid-amd64] Błąd 2
make[1]: Opuszczenie katalogu '/usr/src/linux-aptosid'
debian/rules.gen:7: polecenia dla obiektu 'binary-arch_amd64_none_aptosid-amd64_real' nie powiodły się
make: *** [binary-arch_amd64_none_aptosid-amd64_real] Błąd 2

jakaś podpowiedź w tej materii ? czy może po prostu pobrać pakiety z tąd: [url]http://oscar.aptosid.com/debian/pool/main/l/linux-aptosid/[/url]

Kod:

http://oscar.aptosid.com/debian/pool/main/l/linux-aptosid/linux-image-4.9.0-10.slh.1-aptosid-amd64_4.9-17_amd64.deb
http://oscar.aptosid.com/debian/pool/main/l/linux-aptosid/linux-headers-4.9.0-10.slh.1-aptosid-amd64_4.9-17_amd64.deb

Offline

 

#8  2017-02-18 19:01:41

  jawojx - Użytkownik

jawojx
Użytkownik
Zarejestrowany: 2012-10-11

Re: debian/xfce4 nvidia Xorg nie działa

Lista serwerów:
[url]http://www.aptosid.com/index.php?module=content&func=view&pid=2[/url]

Do /etc/apt/sources.list dodać, na przykład ten serwer:

Kod:

#aptosid
deb http://debian.tu-bs.de/project/aptosid/debian/ sid main fix.main

Kod:

apt-get update

i instalować

Dobra chyba wiem gdzie jest problem, ja jestem ślepy, a ty pisz że masz dwie karty :), czyli pewnie jakiś laptop z optimusem. Jaki to laptop. Ślepy jestem podwójnie bo jaki laptop to jest, też było "[b]Laptop Lenowo Ideapad Y510p[/b]".
Tu są rozwiązania dla ciebie.
[url]https://forum.dug.net.pl/viewtopic.php?id=25537[/url]
[url]https://wiki.debian.org/Bumblebee[/url]
[url]https://wiki.debian.org/NvidiaGraphicsDrivers/Optimus#Configure_LightDM[/url]
[url]https://wiki.archlinux.org/index.php/NVIDIA_Optimus[/url]

Przepraszam za pierwszy mylny trop, ale dobrze jest pisać na początku wpisu, a nawet w tytule o laptopie. Co nie umniejsza mojej winy i tego że nieuważnie przeczytałem watek.

Ostatnio edytowany przez jawojx (2017-02-18 21:58:49)

Offline

 

#9  2017-02-19 12:08:35

  Merle - Nowy użytkownik

Merle
Nowy użytkownik
Zarejestrowany: 2017-02-17

Re: debian/xfce4 nvidia Xorg nie działa

YES YES YES
ten ostatni link to było to, brakowało setupu ekranów dla DM
po użyciu konfiguracji LightDM z [url]https://wiki.archlinux.org/index.php/NVIDIA_Optimus[/url]
zatrybiło
driver już był, ale nieaktywny wystarczyło dodać:

Kod:

merle@merlap:~$ cat /usr/share/X11/xorg.conf.d/20-nvidia.conf 
Section "Module"
    Load "modesetting"
EndSection

Section "Device"
        Identifier "GeForce GT 755M"
        Driver "nvidia"
    BusID "PCI:1:0:0"
    Option "AllowEmptyInitialConfiguration"
EndSection

Section "Device"
        Identifier  "intel"
        Driver      "modesetting"
        BusID       "PCI:0:2:0"
    Option      "AccelMethod"  "sna"
    #Option      "TearFree" "True"
    #Option      "Tiling" "True"
    #Option      "SwapbuffersWait" "True"
EndSection

i mam wreszcie oczekiwany rezultat:

Kod:

merle@merlap:~$ glxinfo |grep version
server glx version string: 1.4
client glx version string: 1.4
GLX version: 1.4
OpenGL core profile version string: 4.5.0 NVIDIA 375.26
OpenGL core profile shading language version string: 4.50 NVIDIA
OpenGL version string: 4.5.0 NVIDIA 375.26
OpenGL shading language version string: 4.50 NVIDIA
OpenGL ES profile version string: OpenGL ES 3.2 NVIDIA 375.26
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.20
    GL_EXT_shader_implicit_conversions, GL_EXT_shader_integer_mix,

pozostaje skonfigurować ekrany, ale to już detal.

Dzięki bardzo za pomocne wskazówki, będę tu częściej zaglądał, może nadaży się okazja odwdzięczyć się :)

[b]podsumuję całość bo właśnie to robiłem na nowo w docelowej instalacji:[/b]
używam SparkyLinux i inne dystrybucje mogą się różnić (mp koniecznosc instalacji bumblebee czy tam driverów optimus)
[b]po instalacji systemu:[/b]
[b]nvidia-detect [/b]- pokazuje ze mam karte (no ameryki nie odkryło, taka formalnosc)
potrzebne numerki BusID

Kod:

merle@merlap:~$ lspci|grep -e VGA -e 3D
00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation GK107M [GeForce GT 755M] (rev a1)

[b]troche instalacji:[/b]

Kod:

dpkg --add-architecture i386
apt-get update
apt-get install aptitude vim mc nvidia-driver

vim - bo jakos nano mi nie pasi
mc - bo wygodne
aptitude - lubie widziec
nvidia-driver - bo to nam wskazał detect

po instalacji mamy sugestie o potrzebie restartu, ale z tym poczekajmy, pierw konfiguracja.

[b]konfiguracja lightdm:[/b]
/etc/lightdm/display_setup.sh

Kod:

#!/bin/sh
xrandr --setprovideroutputsource modesetting NVIDIA-0
xrandr --auto

chmod +x /etc/lightdm/display_setup.sh
w pliku /etc/lightdm/lightdm.conf
w sekcji [Seat:*] (może być inna np: [SeatDefault])
odkomentowac linie

Kod:

#display-setup-script=

uzupelnic o parametr:

Kod:

display-setup-script=/etc/lightdm/display_setup.sh

[b]konfiguracja xorg:[/b]
/usr/share/X11/xorg.conf.d/20-nvidia.conf - plik moze sie znajdowac w innym miejscu i miec inną nazwę, grunt zeby zawartosc była.
zawartosc powyżej, umiejscowienie może być inne
istotne parametry BusID pobieramy z wyniku lspci

i tyle, po restarcie systemu śmiga

pozdrawiam i jeszcze raz dzieki za pomoc.

Ostatnio edytowany przez Merle (2017-02-25 12:47:46)

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Możesz wyłączyć AdBlock — tu nie ma reklam ;-)

[ Generated in 0.012 seconds, 13 queries executed ]

Informacje debugowania

Time (s) Query
0.00009 SET CHARSET latin2
0.00004 SET NAMES latin2
0.00090 SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.145.50.71' WHERE u.id=1
0.00070 UPDATE punbb_online SET logged=1732204415 WHERE ident='3.145.50.71'
0.00047 SELECT * FROM punbb_online WHERE logged<1732204115
0.00059 DELETE FROM punbb_online WHERE ident='3.15.143.18'
0.00074 DELETE FROM punbb_online WHERE ident='54.36.149.43'
0.00076 SELECT topic_id FROM punbb_posts WHERE id=308816
0.00120 SELECT id FROM punbb_posts WHERE topic_id=29367 ORDER BY posted
0.00056 SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=29367 AND t.moved_to IS NULL
0.00005 SELECT search_for, replace_with FROM punbb_censoring
0.00230 SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=29367 ORDER BY p.id LIMIT 0,25
0.00090 UPDATE punbb_topics SET num_views=num_views+1 WHERE id=29367
Total query time: 0.0093 s