Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
#26 2017-06-01 19:14:19
milik - 
Użytkownik
- milik
- Użytkownik
- Zarejestrowany: 2008-11-11
Re: Zacinanie openshot-qt
Cuda zainstalowany. Niestety wypluło coś takiego:
Kod:
root@irin:/home/milik# optirun glxinfo | grep OpenGL [77963.884970] [ERROR]No bridge found. Try installing primus or virtualgl. root@irin:/home/milik# dpkg -l | grep nvidia-cuda-toolkit ii nvidia-cuda-toolkit 8.0.44-3 amd64 NVIDIA CUDA development toolkit root@irin:/home/milik# cd Pobrane/ root@irin:/home/milik/Pobrane# cd .. root@irin:/home/milik# cd Obrazy/ root@irin:/home/milik/Obrazy# optirun ffmpeg -i test4K.mp4 -vcodec nvenc test_gpu.mkv -loglevel debug [78105.086317] [ERROR]No bridge found. Try installing primus or virtualgl. root@irin:/home/milik/Obrazy# LD_LIBRARY_PATH=/usr/lib/nvidia:/usr/lib/nvidia-cuda-toolkit:$LD_LIBRARY_PATH optirun ffmpeg -i test4K.mp4 -vcodec nvenc test_gpu.mkv [78118.239964] [ERROR]No bridge found. Try installing primus or virtualgl. root@irin:/home/milik/Obrazy#
Offline
#27 2017-06-01 19:42:51
jawojx - Użytkownik
- jawojx
- Użytkownik
- Zarejestrowany: 2012-10-11
Re: Zacinanie openshot-qt
Co pokazuje:
Kod:
echo linux-headers-$(uname -r)
i
Kod:
dpkg -l | linux-headers
Zainstalowane:
Kod:
apt-get install bumblebee-nvidia primus
Sterowniki prawidłowe są:
Kod:
dpkg -l | grep nvidia
Nic nie ma w /etc/X11/xorg.conf.d/
Ostatnio edytowany przez jawojx (2017-06-01 19:46:28)
Offline
#28 2017-06-01 19:52:47
milik - Użytkownik
- milik
- Użytkownik
- Zarejestrowany: 2008-11-11
Re: Zacinanie openshot-qt
Kod:
root@irin:/home/milik# echo linux-headers-$(uname -r) linux-headers-4.9.0-3-amd64 root@irin:/home/milik# dpkg -l | linux-headers bash: linux-headers: nie znaleziono polecenia root@irin:/home/milik#
Zainstalowałem:
Kod:
apt-get install bumblebee-nvidia primus
Serowniki:
Kod:
root@irin:/home/milik# dpkg -l | grep nvidia ii bumblebee-nvidia 3.2.1-14 amd64 NVIDIA Optimus support using the proprietary NVIDIA driver ii glx-alternative-nvidia 0.7.4 amd64 allows the selection of NVIDIA as GLX provider ii libegl-nvidia0:amd64 375.66-1 amd64 NVIDIA binary EGL library ii libegl-nvidia0:i386 375.66-1 i386 NVIDIA binary EGL library ii libegl1-glvnd-nvidia:amd64 375.66-1 amd64 Vendor neutral GL dispatch library -- libEGL ii libegl1-glvnd-nvidia:i386 375.66-1 i386 Vendor neutral GL dispatch library -- libEGL ii libgl1-glvnd-nvidia-glx:amd64 375.66-1 amd64 Vendor neutral GL dispatch library -- libGL ii libgl1-glvnd-nvidia-glx:i386 375.66-1 i386 Vendor neutral GL dispatch library -- libGL ii libgl1-nvidia-glvnd-glx:amd64 375.66-1 amd64 NVIDIA binary OpenGL/GLX library (GLVND variant) ii libgl1-nvidia-glvnd-glx:i386 375.66-1 i386 NVIDIA binary OpenGL/GLX library (GLVND variant) ii libgldispatch0-nvidia:amd64 375.66-1 amd64 Vendor neutral GL dispatch library -- libGLdispatch ii libgldispatch0-nvidia:i386 375.66-1 i386 Vendor neutral GL dispatch library -- libGLdispatch ii libgles-nvidia1:amd64 375.66-1 amd64 NVIDIA binary OpenGL|ES 1.x library ii libgles-nvidia1:i386 375.66-1 i386 NVIDIA binary OpenGL|ES 1.x library ii libgles-nvidia2:amd64 375.66-1 amd64 NVIDIA binary OpenGL|ES 2.x library ii libgles-nvidia2:i386 375.66-1 i386 NVIDIA binary OpenGL|ES 2.x library ii libgles1-glvnd-nvidia:amd64 375.66-1 amd64 NVIDIA binary OpenGL|ES 1.x GLVND stub library ii libgles1-glvnd-nvidia:i386 375.66-1 i386 NVIDIA binary OpenGL|ES 1.x GLVND stub library ii libgles2-glvnd-nvidia:amd64 375.66-1 amd64 NVIDIA binary OpenGL|ES 2.x GLVND stub library ii libgles2-glvnd-nvidia:i386 375.66-1 i386 NVIDIA binary OpenGL|ES 2.x GLVND stub library ii libglx-nvidia0:amd64 375.66-1 amd64 NVIDIA binary GLX library ii libglx-nvidia0:i386 375.66-1 i386 NVIDIA binary GLX library ii libglx0-glvnd-nvidia:amd64 375.66-1 amd64 Vendor neutral GL dispatch library -- libGLX ii libglx0-glvnd-nvidia:i386 375.66-1 i386 Vendor neutral GL dispatch library -- libGLX ii libnvidia-cfg1:amd64 375.66-1 amd64 NVIDIA binary OpenGL/GLX configuration library ii libnvidia-cfg1:i386 375.66-1 i386 NVIDIA binary OpenGL/GLX configuration library ii libnvidia-compiler:amd64 375.66-1 amd64 NVIDIA runtime compiler library ii libnvidia-eglcore:amd64 375.66-1 amd64 NVIDIA binary EGL core libraries ii libnvidia-eglcore:i386 375.66-1 i386 NVIDIA binary EGL core libraries ii libnvidia-fatbinaryloader:amd64 375.66-1 amd64 NVIDIA FAT binary loader ii libnvidia-fatbinaryloader:i386 375.66-1 i386 NVIDIA FAT binary loader ii libnvidia-glcore:amd64 375.66-1 amd64 NVIDIA binary OpenGL/GLX core libraries ii libnvidia-glcore:i386 375.66-1 i386 NVIDIA binary OpenGL/GLX core libraries ii libnvidia-ml1:amd64 375.66-1 amd64 NVIDIA Management Library (NVML) runtime library ii libnvidia-ptxjitcompiler:amd64 375.66-1 amd64 NVIDIA PTX JIT Compiler ii libnvidia-ptxjitcompiler:i386 375.66-1 i386 NVIDIA PTX JIT Compiler ii libopengl0-glvnd-nvidia:amd64 375.66-1 amd64 Vendor neutral GL dispatch library -- libOpenGL ii libopengl0-glvnd-nvidia:i386 375.66-1 i386 Vendor neutral GL dispatch library -- libOpenGL ii nvidia-alternative 375.66-1 amd64 allows the selection of NVIDIA as GLX provider ii nvidia-cuda-dev 8.0.44-3 amd64 NVIDIA CUDA development files ii nvidia-cuda-doc 8.0.44-3 all NVIDIA CUDA and OpenCL documentation ii nvidia-cuda-gdb 8.0.44-3 amd64 NVIDIA CUDA Debugger (GDB) ii nvidia-cuda-toolkit 8.0.44-3 amd64 NVIDIA CUDA development toolkit ii nvidia-driver 375.66-1 amd64 NVIDIA metapackage ii nvidia-driver-bin 375.66-1 amd64 NVIDIA driver support binaries ii nvidia-driver-libs:amd64 375.66-1 amd64 NVIDIA metapackage (OpenGL/GLX/EGL/GLES libraries) ii nvidia-driver-libs:i386 375.66-1 i386 NVIDIA metapackage (OpenGL/GLX/EGL/GLES libraries) ii nvidia-driver-libs-i386:i386 375.66-1 i386 NVIDIA metapackage (OpenGL/GLX/EGL/GLES 32-bit libraries) ii nvidia-egl-common 375.66-1 amd64 NVIDIA binary EGL driver - common files ii nvidia-egl-icd:amd64 375.66-1 amd64 NVIDIA EGL installable client driver (ICD) ii nvidia-egl-icd:i386 375.66-1 i386 NVIDIA EGL installable client driver (ICD) pi nvidia-installer-cleanup:i386 20151021+4 i386 cleanup after driver installation with the nvidia-installer ii nvidia-kernel-common 20151021+4 amd64 NVIDIA binary kernel module support files ii nvidia-kernel-dkms 375.66-1 amd64 NVIDIA binary kernel module DKMS source ii nvidia-kernel-support 375.66-1 amd64 NVIDIA binary kernel module support files ii nvidia-legacy-check 375.66-1 amd64 check for NVIDIA GPUs requiring a legacy driver ii nvidia-modprobe 375.26-1 amd64 utility to load NVIDIA kernel modules and create device nodes ii nvidia-opencl-common 375.66-1 amd64 NVIDIA OpenCL driver - common files ii nvidia-opencl-dev:amd64 8.0.44-3 amd64 NVIDIA OpenCL development files ii nvidia-opencl-icd:amd64 375.66-1 amd64 NVIDIA OpenCL installable client driver (ICD) ii nvidia-persistenced 375.26-2 amd64 daemon to maintain persistent software state in the NVIDIA driver ii nvidia-profiler 8.0.44-3 amd64 NVIDIA Profiler for CUDA and OpenCL ii nvidia-settings 375.26-3 amd64 tool for configuring the NVIDIA graphics driver ii nvidia-smi 375.66-1 amd64 NVIDIA System Management Interface ii nvidia-support 20151021+4 amd64 NVIDIA binary graphics driver support files ii nvidia-vdpau-driver:amd64 375.66-1 amd64 Video Decode and Presentation API for Unix - NVIDIA driver ii nvidia-visual-profiler 8.0.44-3 amd64 NVIDIA Visual Profiler for CUDA and OpenCL ii nvidia-vulkan-common 375.66-1 amd64 NVIDIA Vulkan driver - common files ii nvidia-vulkan-icd:amd64 375.66-1 amd64 NVIDIA Vulkan installable client driver (ICD) ii nvidia-vulkan-icd:i386 375.66-1 i386 NVIDIA Vulkan installable client driver (ICD) ii xserver-xorg-video-nvidia 375.66-1 amd64 NVIDIA binary Xorg driver root@irin:/home/milik#
Katalogu /etc/X11/xorg.conf.d/ nie mam. W /etc/X11/ jest tylko plik xorg.conf
Offline
#29 2017-06-01 20:09:51
jawojx - Użytkownik
- jawojx
- Użytkownik
- Zarejestrowany: 2012-10-11
Re: Zacinanie openshot-qt
Tam zapomniałem wpisać grep, teraz to mało istotne:
Kod:
dpkg -l | grep linux-headers
A przy tym co jest teraz pokazać:
Kod:
glxinfo | grep OpenGL
Jak tam jest nvidia to nic nie robić, jak jest intel to zrobić to.
Przenieś :
Kod:
mv /etc/X11/xorg.conf /etc/X11/xorg.conf_zapas
Uruchom komputer i sprawdź jeszcze raz to z 25.
Ostatnio edytowany przez jawojx (2017-06-01 20:14:02)
Offline
#30 2017-06-01 20:19:04
milik - Użytkownik
- milik
- Użytkownik
- Zarejestrowany: 2008-11-11
Re: Zacinanie openshot-qt
Kod:
root@irin:/home/milik# optirun glxinfo | grep OpenGL [ 238.618004] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Screen 0 deleted because of no matching config section. [ 238.618044] [ERROR]Aborting because fallback start is disabled. root@irin:/home/milik# dpkg -l | grep nvidia-cuda-toolkit ii nvidia-cuda-toolkit 8.0.44-3 amd64 NVIDIA CUDA development toolkit root@irin:/home/milik# cd Obrazy/ root@irin:/home/milik/Obrazy# optirun ffmpeg -i test4K.mp4 -vcodec nvenc test_gpu.mkv -loglevel debug [ 269.791280] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Screen 0 deleted because of no matching config section. [ 269.791316] [ERROR]Aborting because fallback start is disabled. root@irin:/home/milik/Obrazy# LD_LIBRARY_PATH=/usr/lib/nvidia:/usr/lib/nvidia-cuda-toolkit:$LD_LIBRARY_PATH optirun ffmpeg -i test4K.mp4 -vcodec nvenc test_gpu.mkv [ 283.276790] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Screen 0 deleted because of no matching config section. [ 283.276827] [ERROR]Aborting because fallback start is disabled. root@irin:/home/milik/Obrazy#
Offline
#31 2017-06-01 20:35:49
jawojx - Użytkownik
- jawojx
- Użytkownik
- Zarejestrowany: 2012-10-11
Re: Zacinanie openshot-qt
A to:
Kod:
glxinfo | grep OpenGL
Co jest w:
Kod:
cat /var/log/Xorg.0.log
a jest:
Kod:
cat /var/log/Xorg.8.log
i
Kod:
cat /etc/bumblebee/xorg.conf.nvidia
Czy wycofałeś wszystkie zmiany jak chciałeś zrobić "ręczne" przełączanie np. w [b]/etc/lightdm/lightdm.conf[/b]. Może tu cos zostało [b]/etc/lightdm/display_setup.sh[/b].
Ostatnio edytowany przez jawojx (2017-06-01 20:49:54)
Offline
#32 2017-06-01 20:56:07
milik - Użytkownik
- milik
- Użytkownik
- Zarejestrowany: 2008-11-11
Re: Zacinanie openshot-qt
Wszystkie zmiany zostały cofnięte, całe środowisko graficzne zostało zainstalowane na nowo.
Teraz wyniki:
Kod:
root@irin:/home/milik# glxinfo | grep OpenGL OpenGL vendor string: Intel Open Source Technology Center OpenGL renderer string: Mesa DRI Intel(R) HD Graphics 5500 (Broadwell GT2) OpenGL core profile version string: 4.5 (Core Profile) Mesa 13.0.6 OpenGL core profile shading language version string: 4.50 OpenGL core profile context flags: (none) OpenGL core profile profile mask: core profile OpenGL core profile extensions: OpenGL version string: 3.0 Mesa 13.0.6 OpenGL shading language version string: 1.30 OpenGL context flags: (none) OpenGL extensions: OpenGL ES profile version string: OpenGL ES 3.1 Mesa 13.0.6 OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.10 OpenGL ES profile extensions: root@irin:/home/milik#
Kod:
root@irin:/home/milik# cat /var/log/Xorg.0.log
[ 3.418]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[ 3.418] X Protocol Version 11, Revision 0
[ 3.418] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 3.418] Current Operating System: Linux irin 4.9.0-3-amd64 #1 SMP Debian 4.9.25-1 (2017-05-02) x86_64
[ 3.418] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 root=UUID=58195624-edb9-4b1d-8bef-babc60edc831 ro pcie_port_pm=off quiet rcutree.rcu_idle_gp_delay=1
[ 3.418] Build Date: 03 March 2017 03:14:41PM
[ 3.418] xorg-server 2:1.19.2-1 (https://www.debian.org/support)
[ 3.418] Current version of pixman: 0.34.0
[ 3.418] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3.418] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.418] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 1 20:13:35 2017
[ 3.421] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 3.422] (==) No Layout section. Using the first Screen section.
[ 3.422] (==) No screen section available. Using defaults.
[ 3.422] (**) |-->Screen "Default Screen Section" (0)
[ 3.422] (**) | |-->Monitor "<default monitor>"
[ 3.423] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 3.423] (**) | |-->Device "GeForce 940M"
[ 3.423] (**) | |-->GPUDevice "intel"
[ 3.423] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3.423] (==) Automatically adding devices
[ 3.423] (==) Automatically enabling devices
[ 3.423] (==) Automatically adding GPU devices
[ 3.423] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 3.426] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 3.426] Entry deleted from font path.
[ 3.431] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 3.431] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3.431] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3.431] (II) Loader magic: 0x5635e9849e00
[ 3.431] (II) Module ABI versions:
[ 3.431] X.Org ANSI C Emulation: 0.4
[ 3.431] X.Org Video Driver: 23.0
[ 3.431] X.Org XInput driver : 24.1
[ 3.431] X.Org Server Extension : 10.0
[ 3.432] (++) using VT number 7
[ 3.432] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 3.433] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 3.437] (--) PCI:*(0:0:2:0) 8086:1616:1025:098a rev 9, Mem @ 0xc2000000/16777216, 0xd0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[ 3.437] (II) "glx" will be loaded by default.
[ 3.437] (II) LoadModule: "modesetting"
[ 3.441] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 3.442] (II) Module modesetting: vendor="X.Org Foundation"
[ 3.442] compiled for 1.19.2, module version = 1.19.2
[ 3.442] Module class: X.Org Video Driver
[ 3.442] ABI class: X.Org Video Driver, version 23.0
[ 3.442] (II) LoadModule: "glx"
[ 3.443] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3.454] (II) Module glx: vendor="X.Org Foundation"
[ 3.454] compiled for 1.19.2, module version = 1.0.0
[ 3.454] ABI class: X.Org Server Extension, version 10.0
[ 3.454] (II) LoadModule: "modesetting"
[ 3.454] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 3.454] (II) Module modesetting: vendor="X.Org Foundation"
[ 3.454] compiled for 1.19.2, module version = 1.19.2
[ 3.454] Module class: X.Org Video Driver
[ 3.454] ABI class: X.Org Video Driver, version 23.0
[ 3.454] (II) UnloadModule: "modesetting"
[ 3.454] (II) Unloading modesetting
[ 3.454] (II) Failed to load module "modesetting" (already loaded, 22069)
[ 3.454] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 3.486] (II) modeset(0): using drv /dev/dri/card0
[ 3.486] (WW) Falling back to old probe method for modesetting
[ 3.502] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 3.502] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 3.502] (==) modeset(0): RGB weight 888
[ 3.502] (==) modeset(0): Default visual is TrueColor
[ 3.502] (II) Loading sub module "glamoregl"
[ 3.502] (II) LoadModule: "glamoregl"
[ 3.502] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 3.513] (II) Module glamoregl: vendor="X.Org Foundation"
[ 3.513] compiled for 1.19.2, module version = 1.0.0
[ 3.513] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3.513] (II) glamor: OpenGL accelerated X.org driver based.
[ 3.544] (II) glamor: EGL version 1.4 (DRI2):
[ 3.555] (II) modeset(0): glamor initialized
[ 3.555] (II) modeset(0): Output eDP-1 has no monitor section
[ 3.556] (II) modeset(0): Output HDMI-1 has no monitor section
[ 3.556] (II) modeset(0): Output DP-1 has no monitor section
[ 3.557] (II) modeset(0): EDID for output eDP-1
[ 3.557] (II) modeset(0): Manufacturer: AUO Model: 38ed Serial#: 0
[ 3.557] (II) modeset(0): Year: 2014 Week: 43
[ 3.557] (II) modeset(0): EDID Version: 1.4
[ 3.557] (II) modeset(0): Digital Display Input
[ 3.557] (II) modeset(0): 6 bits per channel
[ 3.557] (II) modeset(0): Digital interface is DisplayPort
[ 3.557] (II) modeset(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 3.557] (II) modeset(0): Gamma: 2.20
[ 3.557] (II) modeset(0): No DPMS capabilities specified
[ 3.557] (II) modeset(0): Supported color encodings: RGB 4:4:4
[ 3.557] (II) modeset(0): First detailed timing is preferred mode
[ 3.557] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[ 3.557] (II) modeset(0): redX: 0.580 redY: 0.335 greenX: 0.330 greenY: 0.565
[ 3.557] (II) modeset(0): blueX: 0.155 blueY: 0.140 whiteX: 0.313 whiteY: 0.329
[ 3.557] (II) modeset(0): Manufacturer's mask: 0
[ 3.557] (II) modeset(0): Supported detailed timing:
[ 3.557] (II) modeset(0): clock: 142.0 MHz Image Size: 344 x 193 mm
[ 3.557] (II) modeset(0): h_active: 1920 h_sync: 2028 h_sync_end 2076 h_blank_end 2100 h_border: 0
[ 3.557] (II) modeset(0): v_active: 1080 v_sync: 1090 v_sync_end 1100 v_blanking: 1126 v_border: 0
[ 3.557] (II) modeset(0): Unknown vendor-specific block f
[ 3.557] (II) modeset(0): AUO
[ 3.557] (II) modeset(0): B156HTN03.8
[ 3.557] (II) modeset(0): EDID (in hex):
[ 3.557] (II) modeset(0): 00ffffffffffff0006afed3800000000
[ 3.557] (II) modeset(0): 2b1801049522137802bbf59455549027
[ 3.557] (II) modeset(0): 23505400000001010101010101010101
[ 3.557] (II) modeset(0): 010101010101783780b470382e406c30
[ 3.557] (II) modeset(0): aa0058c1100000180000000f00000000
[ 3.557] (II) modeset(0): 00000000000000000020000000fe0041
[ 3.557] (II) modeset(0): 554f0a202020202020202020000000fe
[ 3.557] (II) modeset(0): 004231353648544e30332e38200a00b0
[ 3.557] (II) modeset(0): Printing probed modes for output eDP-1
[ 3.557] (II) modeset(0): Modeline "1920x1080"x60.1 142.00 1920 2028 2076 2100 1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
[ 3.557] (II) modeset(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 3.557] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 3.557] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 3.557] (II) modeset(0): Modeline "1600x1024"x60.2 103.12 1600 1600 1656 1664 1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)
[ 3.557] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 3.557] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 3.557] (II) modeset(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz d)
[ 3.557] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 3.557] (II) modeset(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 3.557] (II) modeset(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 3.557] (II) modeset(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz d)
[ 3.557] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 3.557] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 3.557] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 3.557] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 3.557] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 3.557] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 3.557] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 3.557] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 3.557] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 3.557] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 3.557] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 3.557] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 3.557] (II) modeset(0): Modeline "800x512"x120.3 51.56 800 800 828 832 512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[ 3.557] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 3.557] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 3.557] (II) modeset(0): Modeline "720x450"x119.8 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[ 3.557] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 3.557] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 3.557] (II) modeset(0): Modeline "680x384"x119.6 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[ 3.557] (II) modeset(0): Modeline "680x384"x119.9 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[ 3.557] (II) modeset(0): Modeline "576x432"x120.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[ 3.557] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 3.557] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 3.557] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 3.557] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 3.558] (II) modeset(0): EDID for output HDMI-1
[ 3.558] (II) modeset(0): EDID for output DP-1
[ 3.558] (II) modeset(0): Output eDP-1 connected
[ 3.558] (II) modeset(0): Output HDMI-1 disconnected
[ 3.558] (II) modeset(0): Output DP-1 disconnected
[ 3.558] (II) modeset(0): Using exact sizes for initial modes
[ 3.558] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 3.558] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 3.558] (==) modeset(0): DPI set to (96, 96)
[ 3.558] (II) Loading sub module "fb"
[ 3.558] (II) LoadModule: "fb"
[ 3.558] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 3.559] (II) Module fb: vendor="X.Org Foundation"
[ 3.560] compiled for 1.19.2, module version = 1.0.0
[ 3.560] ABI class: X.Org ANSI C Emulation, version 0.4
[ 3.560] (==) Depth 24 pixmap format is 32 bpp
[ 3.669] (==) modeset(0): Backing store enabled
[ 3.669] (==) modeset(0): Silken mouse enabled
[ 3.670] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 3.670] (==) modeset(0): DPMS enabled
[ 3.670] (WW) modeset(0): Option "AllowEmptyInitialConfiguration" is not used
[ 3.671] (II) modeset(0): [DRI2] Setup complete
[ 3.671] (II) modeset(0): [DRI2] DRI driver: i965
[ 3.671] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 3.671] (--) RandR disabled
[ 3.675] (II) SELinux: Disabled on system
[ 3.682] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 3.682] (II) AIGLX: enabled GLX_ARB_create_context
[ 3.682] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 3.682] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 3.682] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 3.682] (II) AIGLX: enabled GLX_SGI_swap_control
[ 3.682] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 3.682] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 3.682] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 3.682] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 3.682] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 3.683] (II) AIGLX: Loaded and initialized i965
[ 3.683] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 3.687] (II) modeset(0): Damage tracking initialized
[ 3.687] (II) modeset(0): Setting screen physical size to 508 x 285
[ 3.749] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 3.749] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3.749] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 3.749] (II) LoadModule: "libinput"
[ 3.749] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 3.754] (II) Module libinput: vendor="X.Org Foundation"
[ 3.754] compiled for 1.19.0, module version = 0.23.0
[ 3.754] Module class: X.Org XInput Driver
[ 3.754] ABI class: X.Org XInput driver, version 24.1
[ 3.754] (II) Using input driver 'libinput' for 'Power Button'
[ 3.754] (**) Power Button: always reports core events
[ 3.754] (**) Option "Device" "/dev/input/event5"
[ 3.754] (**) Option "_source" "server/udev"
[ 3.755] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[ 3.755] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[ 3.768] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 3.768] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 3.768] (**) Option "xkb_model" "pc105"
[ 3.768] (**) Option "xkb_layout" "pl"
[ 3.786] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[ 3.786] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[ 3.786] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 3.786] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 3.786] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 3.786] (II) Using input driver 'libinput' for 'Video Bus'
[ 3.786] (**) Video Bus: always reports core events
[ 3.786] (**) Option "Device" "/dev/input/event10"
[ 3.786] (**) Option "_source" "server/udev"
[ 3.787] (II) input device 'Video Bus', /dev/input/event10 is tagged by udev as: Keyboard
[ 3.787] (II) input device 'Video Bus', /dev/input/event10 is a keyboard
[ 3.804] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input11/event10"
[ 3.804] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 3.804] (**) Option "xkb_model" "pc105"
[ 3.804] (**) Option "xkb_layout" "pl"
[ 3.804] (II) input device 'Video Bus', /dev/input/event10 is tagged by udev as: Keyboard
[ 3.804] (II) input device 'Video Bus', /dev/input/event10 is a keyboard
[ 3.804] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 3.804] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 3.804] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 3.804] (II) Using input driver 'libinput' for 'Video Bus'
[ 3.804] (**) Video Bus: always reports core events
[ 3.804] (**) Option "Device" "/dev/input/event11"
[ 3.804] (**) Option "_source" "server/udev"
[ 3.805] (II) input device 'Video Bus', /dev/input/event11 is tagged by udev as: Keyboard
[ 3.805] (II) input device 'Video Bus', /dev/input/event11 is a keyboard
[ 3.820] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:47/LNXVIDEO:01/input/input12/event11"
[ 3.820] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 3.820] (**) Option "xkb_model" "pc105"
[ 3.820] (**) Option "xkb_layout" "pl"
[ 3.820] (II) input device 'Video Bus', /dev/input/event11 is tagged by udev as: Keyboard
[ 3.820] (II) input device 'Video Bus', /dev/input/event11 is a keyboard
[ 3.820] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 3.820] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 3.820] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 3.820] (II) Using input driver 'libinput' for 'Power Button'
[ 3.820] (**) Power Button: always reports core events
[ 3.820] (**) Option "Device" "/dev/input/event2"
[ 3.820] (**) Option "_source" "server/udev"
[ 3.821] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 3.821] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 3.836] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 3.836] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 3.836] (**) Option "xkb_model" "pc105"
[ 3.836] (**) Option "xkb_layout" "pl"
[ 3.836] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 3.836] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 3.837] (II) config/udev: Adding input device Lid Switch (/dev/input/event4)
[ 3.837] (II) No input driver specified, ignoring this device.
[ 3.837] (II) This device may have been added with another device file.
[ 3.837] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 3.837] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 3.837] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 3.837] (II) Using input driver 'libinput' for 'Sleep Button'
[ 3.837] (**) Sleep Button: always reports core events
[ 3.837] (**) Option "Device" "/dev/input/event3"
[ 3.837] (**) Option "_source" "server/udev"
[ 3.837] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 3.837] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[ 3.852] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event3"
[ 3.852] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 3.852] (**) Option "xkb_model" "pc105"
[ 3.852] (**) Option "xkb_layout" "pl"
[ 3.852] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 3.852] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[ 3.853] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event14)
[ 3.853] (II) No input driver specified, ignoring this device.
[ 3.853] (II) This device may have been added with another device file.
[ 3.853] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event15)
[ 3.853] (II) No input driver specified, ignoring this device.
[ 3.853] (II) This device may have been added with another device file.
[ 3.853] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event16)
[ 3.853] (II) No input driver specified, ignoring this device.
[ 3.853] (II) This device may have been added with another device file.
[ 3.854] (II) config/udev: Adding input device SIGMACHIP Usb Mouse (/dev/input/event1)
[ 3.854] (**) SIGMACHIP Usb Mouse: Applying InputClass "evdev pointer catchall"
[ 3.854] (**) SIGMACHIP Usb Mouse: Applying InputClass "libinput pointer catchall"
[ 3.854] (II) Using input driver 'libinput' for 'SIGMACHIP Usb Mouse'
[ 3.854] (**) SIGMACHIP Usb Mouse: always reports core events
[ 3.854] (**) Option "Device" "/dev/input/event1"
[ 3.854] (**) Option "_source" "server/udev"
[ 3.912] (II) input device 'SIGMACHIP Usb Mouse', /dev/input/event1 is tagged by udev as: Mouse
[ 3.912] (II) input device 'SIGMACHIP Usb Mouse', /dev/input/event1 is a pointer caps
[ 3.944] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:1C4F:0003.0002/input/input1/event1"
[ 3.944] (II) XINPUT: Adding extended input device "SIGMACHIP Usb Mouse" (type: MOUSE, id 11)
[ 3.944] (**) Option "AccelerationScheme" "none"
[ 3.944] (**) SIGMACHIP Usb Mouse: (accel) selected scheme none/0
[ 3.944] (**) SIGMACHIP Usb Mouse: (accel) acceleration factor: 2.000
[ 3.944] (**) SIGMACHIP Usb Mouse: (accel) acceleration threshold: 4
[ 4.004] (II) input device 'SIGMACHIP Usb Mouse', /dev/input/event1 is tagged by udev as: Mouse
[ 4.004] (II) input device 'SIGMACHIP Usb Mouse', /dev/input/event1 is a pointer caps
[ 4.004] (II) config/udev: Adding input device SIGMACHIP Usb Mouse (/dev/input/mouse0)
[ 4.004] (II) No input driver specified, ignoring this device.
[ 4.004] (II) This device may have been added with another device file.
[ 4.005] (II) config/udev: Adding input device HD WebCam (/dev/input/event17)
[ 4.005] (**) HD WebCam: Applying InputClass "evdev keyboard catchall"
[ 4.005] (**) HD WebCam: Applying InputClass "libinput keyboard catchall"
[ 4.005] (II) Using input driver 'libinput' for 'HD WebCam'
[ 4.005] (**) HD WebCam: always reports core events
[ 4.005] (**) Option "Device" "/dev/input/event17"
[ 4.005] (**) Option "_source" "server/udev"
[ 4.005] (II) input device 'HD WebCam', /dev/input/event17 is tagged by udev as: Keyboard
[ 4.005] (II) input device 'HD WebCam', /dev/input/event17 is a keyboard
[ 4.036] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-7/2-7:1.0/input/input18/event17"
[ 4.036] (II) XINPUT: Adding extended input device "HD WebCam" (type: KEYBOARD, id 12)
[ 4.036] (**) Option "xkb_model" "pc105"
[ 4.036] (**) Option "xkb_layout" "pl"
[ 4.036] (II) input device 'HD WebCam', /dev/input/event17 is tagged by udev as: Keyboard
[ 4.036] (II) input device 'HD WebCam', /dev/input/event17 is a keyboard
[ 4.036] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event9)
[ 4.037] (II) No input driver specified, ignoring this device.
[ 4.037] (II) This device may have been added with another device file.
[ 4.037] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 4.037] (II) No input driver specified, ignoring this device.
[ 4.037] (II) This device may have been added with another device file.
[ 4.037] (II) config/udev: Adding input device SYN1B81:01 06CB:7406 Touchpad (/dev/input/event6)
[ 4.037] (**) SYN1B81:01 06CB:7406 Touchpad: Applying InputClass "evdev touchpad catchall"
[ 4.037] (**) SYN1B81:01 06CB:7406 Touchpad: Applying InputClass "libinput touchpad catchall"
[ 4.037] (**) SYN1B81:01 06CB:7406 Touchpad: Applying InputClass "touchpad catchall"
[ 4.037] (**) SYN1B81:01 06CB:7406 Touchpad: Applying InputClass "Default clickpad buttons"
[ 4.037] (II) LoadModule: "synaptics"
[ 4.037] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 4.039] (II) Module synaptics: vendor="X.Org Foundation"
[ 4.039] compiled for 1.19.0, module version = 1.9.0
[ 4.039] Module class: X.Org XInput Driver
[ 4.039] ABI class: X.Org XInput driver, version 24.1
[ 4.039] (II) Using input driver 'synaptics' for 'SYN1B81:01 06CB:7406 Touchpad'
[ 4.039] (**) SYN1B81:01 06CB:7406 Touchpad: always reports core events
[ 4.039] (**) Option "Device" "/dev/input/event6"
[ 4.100] (II) synaptics: SYN1B81:01 06CB:7406 Touchpad: found clickpad property
[ 4.100] (--) synaptics: SYN1B81:01 06CB:7406 Touchpad: x-axis range 0 - 1236 (res 12)
[ 4.100] (--) synaptics: SYN1B81:01 06CB:7406 Touchpad: y-axis range 0 - 898 (res 12)
[ 4.100] (II) synaptics: SYN1B81:01 06CB:7406 Touchpad: device does not report pressure, will use touch data.
[ 4.100] (II) synaptics: SYN1B81:01 06CB:7406 Touchpad: device does not report finger width.
[ 4.100] (--) synaptics: SYN1B81:01 06CB:7406 Touchpad: buttons: left double triple
[ 4.100] (--) synaptics: SYN1B81:01 06CB:7406 Touchpad: Vendor 0x6cb Product 0x7406
[ 4.100] (--) synaptics: SYN1B81:01 06CB:7406 Touchpad: invalid pressure range. defaulting to 0 - 255
[ 4.100] (--) synaptics: SYN1B81:01 06CB:7406 Touchpad: invalid finger width range. defaulting to 0 - 15
[ 4.100] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 4.100] (--) synaptics: SYN1B81:01 06CB:7406 Touchpad: touchpad found
[ 4.100] (**) SYN1B81:01 06CB:7406 Touchpad: always reports core events
[ 4.140] (**) Option "config_info" "udev:/sys/devices/pci0000:00/INT3432:00/i2c-0/i2c-SYN1B81:01/0018:06CB:7406.0001/input/input6/event6"
[ 4.140] (II) XINPUT: Adding extended input device "SYN1B81:01 06CB:7406 Touchpad" (type: TOUCHPAD, id 13)
[ 4.140] (**) synaptics: SYN1B81:01 06CB:7406 Touchpad: (accel) MinSpeed is now constant deceleration 2.5
[ 4.140] (**) synaptics: SYN1B81:01 06CB:7406 Touchpad: (accel) MaxSpeed is now 1.75
[ 4.140] (**) synaptics: SYN1B81:01 06CB:7406 Touchpad: (accel) AccelFactor is now 0.131
[ 4.140] (**) SYN1B81:01 06CB:7406 Touchpad: (accel) keeping acceleration scheme 1
[ 4.140] (**) SYN1B81:01 06CB:7406 Touchpad: (accel) acceleration profile 1
[ 4.140] (**) SYN1B81:01 06CB:7406 Touchpad: (accel) acceleration factor: 2.000
[ 4.140] (**) SYN1B81:01 06CB:7406 Touchpad: (accel) acceleration threshold: 4
[ 4.140] (--) synaptics: SYN1B81:01 06CB:7406 Touchpad: touchpad found
[ 4.141] (II) config/udev: Adding input device SYN1B81:01 06CB:7406 Touchpad (/dev/input/mouse1)
[ 4.141] (**) SYN1B81:01 06CB:7406 Touchpad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 4.141] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 4.141] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 4.141] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 4.141] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 4.141] (**) AT Translated Set 2 keyboard: always reports core events
[ 4.141] (**) Option "Device" "/dev/input/event0"
[ 4.141] (**) Option "_source" "server/udev"
[ 4.141] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 4.141] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 4.164] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 4.164] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 4.164] (**) Option "xkb_model" "pc105"
[ 4.164] (**) Option "xkb_layout" "pl"
[ 4.164] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 4.164] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 4.164] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 4.164] (II) No input driver specified, ignoring this device.
[ 4.164] (II) This device may have been added with another device file.
[ 4.165] (II) config/udev: Adding input device Acer WMI hotkeys (/dev/input/event12)
[ 4.165] (**) Acer WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 4.165] (**) Acer WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 4.165] (II) Using input driver 'libinput' for 'Acer WMI hotkeys'
[ 4.165] (**) Acer WMI hotkeys: always reports core events
[ 4.165] (**) Option "Device" "/dev/input/event12"
[ 4.165] (**) Option "_source" "server/udev"
[ 4.165] (II) input device 'Acer WMI hotkeys', /dev/input/event12 is tagged by udev as: Keyboard
[ 4.165] (II) input device 'Acer WMI hotkeys', /dev/input/event12 is a keyboard
[ 4.172] (**) Option "config_info" "udev:/sys/devices/virtual/input/input13/event12"
[ 4.172] (II) XINPUT: Adding extended input device "Acer WMI hotkeys" (type: KEYBOARD, id 15)
[ 4.172] (**) Option "xkb_model" "pc105"
[ 4.172] (**) Option "xkb_layout" "pl"
[ 4.172] (II) input device 'Acer WMI hotkeys', /dev/input/event12 is tagged by udev as: Keyboard
[ 4.172] (II) input device 'Acer WMI hotkeys', /dev/input/event12 is a keyboard
[ 4.173] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/event13)
[ 4.173] (II) No input driver specified, ignoring this device.
[ 4.173] (II) This device may have been added with another device file.
[ 4.173] (II) config/udev: Adding input device Acer BMA150 accelerometer (/dev/input/js0)
[ 4.173] (II) No input driver specified, ignoring this device.
[ 4.173] (II) This device may have been added with another device file.
[ 14.452] (II) modeset(0): EDID vendor "AUO", prod id 14573
[ 14.452] (II) modeset(0): Printing DDC gathered Modelines:
[ 14.452] (II) modeset(0): Modeline "1920x1080"x0.0 142.00 1920 2028 2076 2100 1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
[ 14.576] (II) modeset(0): EDID vendor "AUO", prod id 14573
[ 14.576] (II) modeset(0): Printing DDC gathered Modelines:
[ 14.576] (II) modeset(0): Modeline "1920x1080"x0.0 142.00 1920 2028 2076 2100 1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
[ 1838.444] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 1958.400] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 1958.466] (II) modeset(0): EDID vendor "AUO", prod id 14573
[ 1958.466] (II) modeset(0): Printing DDC gathered Modelines:
[ 1958.466] (II) modeset(0): Modeline "1920x1080"x0.0 142.00 1920 2028 2076 2100 1080 1090 1100 1126 -hsync -vsync (67.6 kHz eP)
[ 1958.483] (II) input device 'Power Button', /dev/input/event5 is tagged by udev as: Keyboard
[ 1958.483] (II) input device 'Power Button', /dev/input/event5 is a keyboard
[ 1958.483] (II) input device 'Video Bus', /dev/input/event10 is tagged by udev as: Keyboard
[ 1958.483] (II) input device 'Video Bus', /dev/input/event10 is a keyboard
[ 1958.484] (II) input device 'Video Bus', /dev/input/event11 is tagged by udev as: Keyboard
[ 1958.484] (II) input device 'Video Bus', /dev/input/event11 is a keyboard
[ 1958.484] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 1958.484] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 1958.485] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 1958.485] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[ 1958.544] (II) input device 'SIGMACHIP Usb Mouse', /dev/input/event1 is tagged by udev as: Mouse
[ 1958.544] (II) input device 'SIGMACHIP Usb Mouse', /dev/input/event1 is a pointer caps
[ 1958.544] (II) input device 'HD WebCam', /dev/input/event17 is tagged by udev as: Keyboard
[ 1958.545] (II) input device 'HD WebCam', /dev/input/event17 is a keyboard
[ 1958.545] (--) synaptics: SYN1B81:01 06CB:7406 Touchpad: touchpad found
[ 1958.546] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 1958.546] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 1958.546] (II) input device 'Acer WMI hotkeys', /dev/input/event12 is tagged by udev as: Keyboard
[ 1958.546] (II) input device 'Acer WMI hotkeys', /dev/input/event12 is a keyboard
root@irin:/home/milik#Kod:
root@irin:/home/milik# cat /var/log/Xorg.8.log
[ 283.265]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[ 283.265] X Protocol Version 11, Revision 0
[ 283.265] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[ 283.265] Current Operating System: Linux irin 4.9.0-3-amd64 #1 SMP Debian 4.9.25-1 (2017-05-02) x86_64
[ 283.265] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-3-amd64 root=UUID=58195624-edb9-4b1d-8bef-babc60edc831 ro pcie_port_pm=off quiet rcutree.rcu_idle_gp_delay=1
[ 283.265] Build Date: 03 March 2017 03:14:41PM
[ 283.265] xorg-server 2:1.19.2-1 (https://www.debian.org/support)
[ 283.265] Current version of pixman: 0.34.0
[ 283.265] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 283.265] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 283.266] (==) Log file: "/var/log/Xorg.8.log", Time: Thu Jun 1 20:18:14 2017
[ 283.266] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 283.266] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 283.266] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 283.266] (==) ServerLayout "Layout0"
[ 283.266] (==) No screen section available. Using defaults.
[ 283.266] (**) |-->Screen "Default Screen Section" (0)
[ 283.266] (**) | |-->Monitor "<default monitor>"
[ 283.266] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 283.266] (**) | |-->Device "GeForce 940M"
[ 283.266] (**) | |-->GPUDevice "intel"
[ 283.266] (**) | |-->GPUDevice "DiscreteNvidia"
[ 283.266] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 283.266] (**) Option "AutoAddDevices" "false"
[ 283.266] (**) Option "AutoAddGPU" "false"
[ 283.266] (**) Not automatically adding devices
[ 283.266] (==) Automatically enabling devices
[ 283.266] (**) Not automatically adding GPU devices
[ 283.266] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 283.266] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 283.266] Entry deleted from font path.
[ 283.266] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 283.266] (++) ModulePath set to "/usr/lib/nvidia/nvidia,/usr/lib/xorg/modules"
[ 283.266] (==) |-->Input Device "<default pointer>"
[ 283.266] (==) |-->Input Device "<default keyboard>"
[ 283.266] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 283.266] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 283.266] (II) Loader magic: 0x563d1d6e0e00
[ 283.266] (II) Module ABI versions:
[ 283.266] X.Org ANSI C Emulation: 0.4
[ 283.266] X.Org Video Driver: 23.0
[ 283.266] X.Org XInput driver : 24.1
[ 283.266] X.Org Server Extension : 10.0
[ 283.267] (--) using VT number 7
[ 283.267] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 283.267] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 283.267] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 283.269] (--) PCI:*(0:4:0:0) 10de:1347:1025:098c rev 162, Mem @ 0xc3000000/16777216, 0xb0000000/268435456, 0xc0000000/33554432, I/O @ 0x00003000/128
[ 283.269] (II) "glx" will be loaded by default.
[ 283.269] (II) LoadModule: "modesetting"
[ 283.269] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 283.269] (II) Module modesetting: vendor="X.Org Foundation"
[ 283.269] compiled for 1.19.2, module version = 1.19.2
[ 283.269] Module class: X.Org Video Driver
[ 283.269] ABI class: X.Org Video Driver, version 23.0
[ 283.269] (II) LoadModule: "glx"
[ 283.269] (II) Loading /usr/lib/nvidia/nvidia/libglx.so
[ 283.273] (II) Module glx: vendor="NVIDIA Corporation"
[ 283.273] compiled for 4.0.2, module version = 1.0.0
[ 283.273] Module class: X.Org Server Extension
[ 283.273] (II) NVIDIA GLX Module 375.66 Mon May 1 14:28:39 PDT 2017
[ 283.273] (II) LoadModule: "modesetting"
[ 283.273] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 283.273] (II) Module modesetting: vendor="X.Org Foundation"
[ 283.273] compiled for 1.19.2, module version = 1.19.2
[ 283.273] Module class: X.Org Video Driver
[ 283.273] ABI class: X.Org Video Driver, version 23.0
[ 283.273] (II) UnloadModule: "modesetting"
[ 283.273] (II) Unloading modesetting
[ 283.273] (II) Failed to load module "modesetting" (already loaded, 22077)
[ 283.273] (II) LoadModule: "nvidia"
[ 283.273] (II) Loading /usr/lib/nvidia/nvidia/nvidia_drv.so
[ 283.273] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 283.273] compiled for 4.0.2, module version = 1.0.0
[ 283.273] Module class: X.Org Video Driver
[ 283.273] (II) LoadModule: "mouse"
[ 283.274] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 283.274] (II) Module mouse: vendor="X.Org Foundation"
[ 283.274] compiled for 1.19.0, module version = 1.9.2
[ 283.274] Module class: X.Org XInput Driver
[ 283.274] ABI class: X.Org XInput driver, version 24.1
[ 283.274] (II) LoadModule: "kbd"
[ 283.274] (WW) Warning, couldn't open module kbd
[ 283.274] (II) UnloadModule: "kbd"
[ 283.274] (II) Unloading kbd
[ 283.274] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 283.274] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 283.274] (II) NVIDIA dlloader X Driver 375.66 Mon May 1 14:03:26 PDT 2017
[ 283.274] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 283.274] (WW) Falling back to old probe method for modesetting
[ 283.274] (II) modeset(2): using default device
[ 283.274] (II) modeset(2): using default device
[ 283.274] (II) Loading sub module "fb"
[ 283.274] (II) LoadModule: "fb"
[ 283.274] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 283.274] (II) Module fb: vendor="X.Org Foundation"
[ 283.274] compiled for 1.19.2, module version = 1.0.0
[ 283.274] ABI class: X.Org ANSI C Emulation, version 0.4
[ 283.274] (II) Loading sub module "wfb"
[ 283.274] (II) LoadModule: "wfb"
[ 283.274] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 283.274] (II) Module wfb: vendor="X.Org Foundation"
[ 283.274] compiled for 1.19.2, module version = 1.0.0
[ 283.274] ABI class: X.Org ANSI C Emulation, version 0.4
[ 283.275] (II) Loading sub module "ramdac"
[ 283.275] (II) LoadModule: "ramdac"
[ 283.275] (II) Module "ramdac" already built-in
[ 283.275] (EE) Screen 0 deleted because of no matching config section.
[ 283.275] (II) UnloadModule: "modesetting"
[ 283.275] (EE) Screen 0 deleted because of no matching config section.
[ 283.275] (II) UnloadModule: "modesetting"
[ 283.275] (EE) Screen 1 deleted because of no matching config section.
[ 283.275] (II) UnloadModule: "nvidia"
[ 283.275] (II) UnloadSubModule: "wfb"
[ 283.275] (II) UnloadSubModule: "fb"
[ 283.275] (EE)
Fatal server error:
[ 283.275] (EE) Cannot run in framebuffer mode. Please specify busIDs for all framebuffer devices
[ 283.275] (EE)
[ 283.275] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 283.275] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[ 283.275] (EE)
[ 283.275] (EE) Server terminated with error (1). Closing log file.
root@irin:/home/milik#Kod:
root@irin:/home/milik# cat /etc/bumblebee/xorg.conf.nvidia
Section "ServerLayout"
Identifier "Layout0"
Option "AutoAddDevices" "false"
Option "AutoAddGPU" "false"
EndSection
Section "Device"
Identifier "DiscreteNvidia"
Driver "nvidia"
VendorName "NVIDIA Corporation"
# If the X server does not automatically detect your VGA device,
# you can manually set it here.
# To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
# as you see in the commented example.
# This Setting may be needed in some platforms with more than one
# nvidia card, which may confuse the proprietary driver (e.g.,
# trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
# BusID "PCI:01:00:0"
# Setting ProbeAllGpus to false prevents the new proprietary driver
# instance spawned to try to control the integrated graphics card,
# which is already being managed outside bumblebee.
# This option doesn't hurt and it is required on platforms running
# more than one nvidia graphics card with the proprietary driver.
# (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
# If this option is not set, the new Xorg may blacken the screen and
# render it unusable (unless you have some way to run killall Xorg).
Option "ProbeAllGpus" "false"
Option "NoLogo" "true"
Option "UseEDID" "false"
Option "UseDisplayDevice" "none"
EndSection
root@irin:/home/milik#Offline
#33 2017-06-01 21:01:25
jawojx - Użytkownik
- jawojx
- Użytkownik
- Zarejestrowany: 2012-10-11
Re: Zacinanie openshot-qt
Tam jeszcze dopisałem. Czy wycofałeś wszystkie zmiany jak chciałeś zrobić "ręczne" przełączanie np. w [b]/etc/lightdm/lightdm.conf[/b]. Może tu coś zostało [b]/etc/lightdm/display_setup.sh[/b].
Offline
#34 2017-06-01 21:11:07
milik - Użytkownik
- milik
- Użytkownik
- Zarejestrowany: 2008-11-11
Re: Zacinanie openshot-qt
W /etc/lightdm/lightdm.conf linijka display setup script jest zchaszowana #, skrypt display_setup.sh też usunąłem.
Kod:
milik@irin:~$ optirun -vv glxgears [ 39.832939] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf [ 39.833205] [DEBUG]optirun version 3.2.1 starting... [ 39.833213] [DEBUG]Active configuration: [ 39.833218] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf [ 39.833224] [DEBUG] X display: :8 [ 39.833229] [DEBUG] LD_LIBRARY_PATH: /usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia [ 39.833232] [DEBUG] Socket path: /var/run/bumblebee.socket [ 39.833236] [DEBUG] Accel/display bridge: auto [ 39.833247] [DEBUG] VGL Compression: proxy [ 39.833255] [DEBUG] VGLrun extra options: [ 39.833262] [DEBUG] Primus LD Path: /usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus [ 39.833551] [DEBUG]Using auto-detected bridge primus [ 40.045327] [INFO]Response: No - error: [XORG] (EE) Screen 0 deleted because of no matching config section. [ 40.045347] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Screen 0 deleted because of no matching config section. [ 40.045358] [DEBUG]Socket closed. [ 40.045380] [ERROR]Aborting because fallback start is disabled. [ 40.045387] [DEBUG]Killing all remaining processes. milik@irin:~$
Tu w LD_LIBRARY PATH jest sciezka do nvidii, może to jest przyczyną tego całego syfu?
Ostatnio edytowany przez milik (2017-06-01 21:14:59)
Offline
#35 2017-06-01 21:34:09
jawojx - Użytkownik
- jawojx
- Użytkownik
- Zarejestrowany: 2012-10-11
Re: Zacinanie openshot-qt
Nie to jest zmienna podana tylko na czas uruchomienia, ona się nie zapisała na stałe. Sterownik intela działa prawidłowo, a nvidia nie chce się uruchomić na ekranie 0 z braku skonfigurowanej sekcji. Zaraz sprawdzę to wszystko dokładnie gdzieś została zmiana i tyle.
Po usunięciu /etc/lightdm/display_setup.sh zrestartowałeś komputer ?
Offline
#36 2017-06-01 21:35:59
milik - Użytkownik
- milik
- Użytkownik
- Zarejestrowany: 2008-11-11
Re: Zacinanie openshot-qt
Tak, to po restarcie było wpisane. Kuźwa, rozkłada mnie już ten komputer. Żeby karty nie można było uruchomić to aż niemożliwe.
Offline
#37 2017-06-01 23:39:24
jawojx - Użytkownik
- jawojx
- Użytkownik
- Zarejestrowany: 2012-10-11
Re: Zacinanie openshot-qt
Parę rzeczy zrobiłem u siebie porównałem configi i dalej nie wiem dlaczego on szuka sekcji dla tego screen-a skoro wcześniej jej nie miał i było dobrze, ale wpadło mi parę pomysłów.
Pokaż co tam było w /etc/X11/xorg.conf_zapas i skasuj go, sprawdź czy nie ma tam innych configów. Nie masz folderu /etc/X11/xorg.conf.d/ tak jak pisałeś, lub nic tam nie ma.
Przekonfiguruj parę pakietów.
Kod:
dpkg-reconfigure xserver-xorg
Kod:
dpkg-reconfigure bumblebee-nvidia
Kod:
dpkg-reconfigure bbswitch-dkms
Teraz zrestartuj komputer i sprawdź czy nvidia działa:
Kod:
optirun glxinfo | grep OpenGL
Jak dalej jest ten sam błąd to w [b]/etc/bumblebee/xorg.conf.nvidia[/b] dodaj na samym dole taki wpis:
Kod:
Section "Screen"
Identifier "Default Screen"
Device "DiscreteNvidia"
EndSectionI sprawdź.
A jeszcze ty domyślny masz lightdm, tak.
Kod:
cat /etc/X11/default-display-manager
A ja jeszcze jutro zobaczę, na świeżynkę.
Offline
#38 2017-06-05 21:18:29
milik - Użytkownik
- milik
- Użytkownik
- Zarejestrowany: 2008-11-11
Re: Zacinanie openshot-qt
Kod:
root@irin:/home/milik# cat /etc/X11/xorg.conf_zapas
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "built-ins"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "Accel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "Backlight" # <str>
#Option "CustomEDID" # <str>
#Option "DRI" # <str>
#Option "Present" # [<bool>]
#Option "ColorKey" # <i>
#Option "VideoKey" # <i>
#Option "Tiling" # [<bool>]
#Option "LinearFramebuffer" # [<bool>]
#Option "HWRotation" # [<bool>]
#Option "VSync" # [<bool>]
#Option "PageFlip" # [<bool>]
#Option "SwapbuffersWait" # [<bool>]
#Option "TripleBuffer" # [<bool>]
#Option "XvPreferOverlay" # [<bool>]
#Option "HotPlug" # [<bool>]
#Option "ReprobeOutputs" # [<bool>]
#Option "XvMC" # [<bool>]
#Option "ZaphodHeads" # <str>
#Option "VirtualHeads" # <i>
#Option "TearFree" # [<bool>]
#Option "PerCrtcPixmaps" # [<bool>]
#Option "FallbackDebug" # [<bool>]
#Option "DebugFlushBatches" # [<bool>]
#Option "DebugFlushCaches" # [<bool>]
#Option "DebugWait" # [<bool>]
#Option "BufferCache" # [<bool>]
Identifier "Card0"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "VideoKey" # <i>
#Option "WrappedFB" # [<bool>]
#Option "GLXVBlank" # [<bool>]
#Option "ZaphodHeads" # <str>
#Option "PageFlip" # [<bool>]
#Option "SwapLimit" # <i>
#Option "AsyncUTSDFS" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # <i>
Identifier "Card1"
Driver "nouveau"
BusID "PCI:4:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
root@irin:/home/milik#Coś przekonfigurowanie tego pierwszego pakietu nie poszło tak jak trzeba, jakby nic się nie wykonało.
Kod:
root@irin:/home/milik# dpkg-reconfigure xserver-xorg root@irin:/home/milik#
Kod:
root@irin:/home/milik# optirun glxinfo | grep OpenGL [ 145.226328] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Screen 0 deleted because of no matching config section. [ 145.226378] [ERROR]Aborting because fallback start is disabled. root@irin:/home/milik#
Kod:
root@irin:/home/milik# cat /etc/X11/default-display-manager /usr/sbin/lightdm root@irin:/home/milik#
Ostatnio edytowany przez milik (2017-06-05 21:30:33)
Offline
#39 2017-06-05 22:34:06
jawojx - Użytkownik
- jawojx
- Użytkownik
- Zarejestrowany: 2012-10-11
Re: Zacinanie openshot-qt
Skąd ty wziąłeś tego xorga.conf, którego zapisaliśmy jako /etc/X11/xorg.conf_zapas. To jest ustawione na dwa ekrany i sterowniki [b]Driver "nouveau"[/b], powinno być [b]nvidia[/b]. Trzeba było skopiować te proste ustawienia z linku co ci dałem. Teraz to nic trzeba zobaczyć gdzie jest błąd.
Wywaliłeś ten xorg.conf_zapas, nie ma tm już ustawień xorg.
Czy po usunięciu xorg.conf i dodaniu tego, zrestartowałeś komputer.
Jak dalej jest ten sam błąd to w /etc/bumblebee/xorg.conf.nvidia dodaj na samym dole taki wpis:
Kod:
Section "Screen" Identifier "Default Screen" Device "DiscreteNvidia" EndSection[/quote]
Jak to nic nie dało to wycofaj te zmiany zrestartuj komputer, sprawdź.
Pokaż.Kod:
cat /etc/bumblebee/bumblebee.confJak dalej nic się nie zmieniło, możesz spróbować przeinstalować pakiety z usunięciem ich konfiguracji, [b]ostrożnie[/b] to powinno zaproponować usuniecie trzech pakietów [b]bumblebee bumblebee-nvidia primus[/b], tylko trzech:
Kod:
apt-get purge bumblebee bumblebee-nvidiaPo odinstalowaniu zainstaluj je ponownie.
Kod:
apt-get install bumblebee bumblebee-nvidia primusZrestartuj komputer i sprawdź.
Ostatnio edytowany przez jawojx (2017-06-05 23:01:03)
Offline
#40 2017-06-06 20:14:25
milik - Użytkownik
- milik
- Użytkownik
- Zarejestrowany: 2008-11-11
Re: Zacinanie openshot-qt
Kod:
root@irin:/home/milik# cat /etc/bumblebee/bumblebee.conf # Configuration file for Bumblebee. Values should **not** be put between quotes ## Server options. Any change made in this section will need a server restart # to take effect. [bumblebeed] # The secondary Xorg server DISPLAY number VirtualDisplay=:8 # Should the unused Xorg server be kept running? Set this to true if waiting # for X to be ready is too long and don't need power management at all. KeepUnusedXServer=false # The name of the Bumbleblee server group name (GID name) ServerGroup=bumblebee # Card power state at exit. Set to false if the card shoud be ON when Bumblebee # server exits. TurnCardOffAtExit=false # The default behavior of '-f' option on optirun. If set to "true", '-f' will # be ignored. NoEcoModeOverride=false # The Driver used by Bumblebee server. If this value is not set (or empty), # auto-detection is performed. The available drivers are nvidia and nouveau # (See also the driver-specific sections below) Driver= # Directory with a dummy config file to pass as a -configdir to secondary X XorgConfDir=/etc/bumblebee/xorg.conf.d # Xorg binary to run XorgBinary=/usr/lib/xorg/Xorg ## Client options. Will take effect on the next optirun executed. [optirun] # Acceleration/ rendering bridge, possible values are auto, virtualgl and # primus. Bridge=auto # The method used for VirtualGL to transport frames between X servers. # Possible values are proxy, jpeg, rgb, xv and yuv. VGLTransport=proxy # List of paths which are searched for the primus libGL.so.1 when using # the primus bridge PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus # Should the program run under optirun even if Bumblebee server or nvidia card # is not available? AllowFallbackToIGC=false # Driver-specific settings are grouped under [driver-NAME]. The sections are # parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto- # detection resolves to NAME). # PMMethod: method to use for saving power by disabling the nvidia card, valid # values are: auto - automatically detect which PM method to use # bbswitch - new in BB 3, recommended if available # switcheroo - vga_switcheroo method, use at your own risk # none - disable PM completely # https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods ## Section with nvidia driver specific options, only parsed if Driver=nvidia [driver-nvidia] # Module name to load, defaults to Driver if empty or unset KernelDriver=nvidia PMMethod=auto # colon-separated path to the nvidia libraries LibraryPath=/usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia # comma-separated path of the directory containing nvidia_drv.so and the # default Xorg modules path XorgModulePath=/usr/lib/nvidia/nvidia,/usr/lib/xorg/modules XorgConfFile=/etc/bumblebee/xorg.conf.nvidia ## Section with nouveau driver specific options, only parsed if Driver=nouveau [driver-nouveau] KernelDriver=nouveau PMMethod=auto XorgConfFile=/etc/bumblebee/xorg.conf.nouveau root@irin:/home/milik#
Z konta usera wygląda to tak:
Kod:
milik@irin:~$ optirun glxinfo | grep OpenGL [ 118.547587] [ERROR]You've no permission to communicate with the Bumblebee daemon. Try adding yourself to the 'bumblebee' group [ 118.547642] [ERROR]Could not connect to bumblebee daemon - is it running? milik@irin:~$
Z roota natomiast tak:
Kod:
root@irin:/home/milik# optirun glxinfo | grep OpenGL [ 130.934333] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Screen 0 deleted because of no matching config section. [ 130.934371] [ERROR]Aborting because fallback start is disabled. root@irin:/home/milik#
edyta\
Oczywiście do grupy jestem dodany.
Ostatnio edytowany przez milik (2017-06-06 22:44:57)
Offline
#41 2017-06-07 00:23:30
jawojx - Użytkownik
- jawojx
- Użytkownik
- Zarejestrowany: 2012-10-11
Re: Zacinanie openshot-qt
Jest ?
Kod:
grep bumblebee /etc/group
Nie ma błędów po:
Kod:
service bumblebee restart
[b]milik[/b]:...Oczywiście do grupy jestem dodany...[/quote]
Najśmieszniejsze że wcale tego nie trzeba normalnie robić, ale nic to nie zepsuje. Na pewno jesteś dodany, sprawdzałeś. Ze zwykłego konta.Kod:
groups $USERlub
Kod:
id $USERPrzeinstalujmy:
Kod:
apt-get install --reinstll bbswitch-dkmsRestart i sprawdź.
W /etc/bumblebee/bumblebee.conf wszystko jest jak powinno być, na razie go nie ruszamy. Może wszystkie moduły dla nvidii trzeba budować od nowa, zobaczymy.Ostatnio edytowany przez jawojx (2017-06-07 00:24:57)
Offline
#42 2017-06-07 19:47:55
milik - Użytkownik
- milik
- Użytkownik
- Zarejestrowany: 2008-11-11
Re: Zacinanie openshot-qt
Kurde, nie ma usera w grupie bumblebeed :/
Kod:
root@irin:/home/milik# mc root@irin:/home/milik# grep bumblebee /etc/group bumblebee:x:999: root@irin:/home/milik# service bumblebee restart Failed to restart bumblebee.service: Unit bumblebee.service not found. root@irin:/home/milik# /etc/init.d/bumblebeed restart [ ok ] Restarting bumblebeed (via systemctl): bumblebeed.service. root@irin:/home/milik# groups $USER root : root root@irin:/home/milik# # usermod -a -G bumblebee milik root@irin:/home/milik#
Po dodaniu usera do grupy, jak widać wyżej ciągle nie ma milik w grupie bumblebeed.
Kod:
milik@irin:~$ groups $USER milik : milik cdrom floppy audio dip video plugdev netdev lpadmin scanner bluetooth milik@irin:~$
Offline
#44 2017-06-07 20:54:02
milik - Użytkownik
- milik
- Użytkownik
- Zarejestrowany: 2008-11-11
Re: Zacinanie openshot-qt
No tak, zrobiłem relog i ciągle nie ma mnie w tej grupie.
edyta\
Dodałem siebie do grupy przez manager jakiś tam. Teraz mamy:
Kod:
milik@irin:~$ optirun glxinfo | grep OpenGL [ 67.521908] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Screen 0 deleted because of no matching config section. [ 67.521971] [ERROR]Aborting because fallback start is disabled. milik@irin:~$
Ostatnio edytowany przez milik (2017-06-07 20:58:44)
Offline
#45 2017-06-07 21:31:47
jawojx - Użytkownik
- jawojx
- Użytkownik
- Zarejestrowany: 2012-10-11
Re: Zacinanie openshot-qt
Zrobiłeś to z posta 41.
Kod:
apt-get install --reinstll bbswitch-dkms
Jak dalej nic, przeinstaluj dkms dla nvidii:
Kod:
apt-get install --reinstall nvidia-kernel-dkms
Jak nic się nie zmieniło, to w ostateczności możesz przeinstalować linux-headers, to przebuduje moduły dla nvidii, pierwsze odinstaluj :
Kod:
apt-get purge bumblebee-nvidia bbswitch-dkms
Przeinstaluj linux-headers:
Kod:
apt-get install --reinstall linux-headers-$(uname -r)
i zainstaluj ponownie:
Kod:
apt-get install bumblebee-nvidia bbswitch-dkms
Po tym powinno być jak w nowej instalacji. Zrestartuj komputer i sprawdź.
A jak wygląda to z normalnego użytkownika.
Kod:
optirun --status
Zajrzałem do twojej historii postów, i widzę że już wałkowałeś trochę inny problem z działaniem nvidii:
https://forum.dug.net.pl/viewtopic.php?pid=307355#p307355
Ostatnio edytowany przez jawojx (2017-06-07 21:37:10)
Offline
#46 2017-06-07 21:54:57
milik - Użytkownik
- milik
- Użytkownik
- Zarejestrowany: 2008-11-11
Re: Zacinanie openshot-qt
Tak, nawet udało się to zrobić ostatnio. Ale to raz działało a raz nie, stąd moja próba odpalenia nvidii na stałe.
Kod:
milik@irin:~$ optirun --status Bumblebee status: Ready (3.2.1). X inactive. Discrete video card is off. milik@irin:~$
Offline
#47 2017-06-07 22:11:46
jawojx - Użytkownik
- jawojx
- Użytkownik
- Zarejestrowany: 2012-10-11
Re: Zacinanie openshot-qt
To:
Kod:
# tee /proc/acpi/bbswitch <<< ON
nie zmienia :
Kod:
optirun --status
Offline
#48 2017-06-07 22:14:48
milik - Użytkownik
- milik
- Użytkownik
- Zarejestrowany: 2008-11-11
Re: Zacinanie openshot-qt
Kod:
milik@irin:~$ optirun --status Bumblebee status: Ready (3.2.1). X inactive. Discrete video card is on. milik@irin:~$
Offline
#49 2017-06-07 22:25:53
jawojx - Użytkownik
- jawojx
- Użytkownik
- Zarejestrowany: 2012-10-11
Re: Zacinanie openshot-qt
No działa, po tym co zrobiłeś sprawdzałeś:
Kod:
glxinfo | grep OpenGL
i
Kod:
optirun glxinfo | grep OpenGL
Edycja: Umknęło mi to.
[b]milik[/b]: Tak, nawet udało się to zrobić ostatnio. Ale to raz działało a raz nie, stąd moja próba odpalenia nvidii na stałe.[/quote]
Przywracamy działanie optirun bo nie udało ci się ustawić nvidii jako domyślnej „na stałe” z porad z linków w [url=https://forum.dug.net.pl/viewtopic.php?pid=311091#p311091]poście nr.6[/url] na dole.
W Debianie karty można przełączać w biosie ( nie każdy to umożliwia ), przez bumblebee i bez bumblebee jak nazwałeś „na stałe”. Tak jak to pisałem wpadło mi coś do głowy, czy ty na pewno odinstalowałeś bumblebee przed ustawianiem „na stałe”, bo chyba nie i z tego mogły wynikać błędy w działaniu.Ostatnio edytowany przez jawojx (2017-06-08 10:13:13)
Offline
#50 2017-06-08 18:58:49
milik - Użytkownik
- milik
- Użytkownik
- Zarejestrowany: 2008-11-11
Re: Zacinanie openshot-qt
Kod:
milik@irin:~$ glxinfo | grep OpenGL OpenGL vendor string: Intel Open Source Technology Center OpenGL renderer string: Mesa DRI Intel(R) HD Graphics 5500 (Broadwell GT2) OpenGL core profile version string: 4.5 (Core Profile) Mesa 13.0.6 OpenGL core profile shading language version string: 4.50 OpenGL core profile context flags: (none) OpenGL core profile profile mask: core profile OpenGL core profile extensions: OpenGL version string: 3.0 Mesa 13.0.6 OpenGL shading language version string: 1.30 OpenGL context flags: (none) OpenGL extensions: OpenGL ES profile version string: OpenGL ES 3.1 Mesa 13.0.6 OpenGL ES profile shading language version string: OpenGL ES GLSL ES 3.10 OpenGL ES profile extensions: milik@irin:~$ optirun glxinfo | grep OpenGL [75176.248699] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) Screen 0 deleted because of no matching config section. [75176.248739] [ERROR]Aborting because fallback start is disabled. milik@irin:~$
Na bank nie odinstalowałem bumblebee przed próbą ustawienia "na stałe", bo nie wiedziałem, że tak trzeba.
Offline
Informacje debugowania
| Time (s) | Query |
|---|---|
| 0.00020 | SET CHARSET latin2 |
| 0.00005 | SET NAMES latin2 |
| 0.00110 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.12.123.41' WHERE u.id=1 |
| 0.00128 | REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '3.12.123.41', 1732746172) |
| 0.00062 | SELECT * FROM punbb_online WHERE logged<1732745872 |
| 0.00049 | SELECT topic_id FROM punbb_posts WHERE id=311166 |
| 0.00007 | SELECT id FROM punbb_posts WHERE topic_id=29614 ORDER BY posted |
| 0.00060 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=29614 AND t.moved_to IS NULL |
| 0.00011 | SELECT search_for, replace_with FROM punbb_censoring |
| 0.00634 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=29614 ORDER BY p.id LIMIT 25,25 |
| 0.00130 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=29614 |
| Total query time: 0.01216 s | |