Forum Debian Users Gang

# Configuration file for Bumblebee. Values should **not** be put between quotes

## Server options. Any change made in this section will need a server restart
# to take effect.
[bumblebeed]
# The secondary Xorg server DISPLAY number
VirtualDisplay=:8
# Should the unused Xorg server be kept running? Set this to true if waiting
# for X to be ready is too long and don't need power management at all.
KeepUnusedXServer=false
# The name of the Bumbleblee server group name (GID name)
ServerGroup=bumblebee
# Card power state at exit. Set to false if the card shoud be ON when Bumblebee
# server exits.
TurnCardOffAtExit=false
# The default behavior of '-f' option on optirun. If set to "true", '-f' will
# be ignored.
NoEcoModeOverride=false
# The Driver used by Bumblebee server. If this value is not set (or empty),
# auto-detection is performed. The available drivers are nvidia and nouveau
# (See also the driver-specific sections below)
Driver=nvidia
# Directory with a dummy config file to pass as a -configdir to secondary X
XorgConfDir=/etc/bumblebee/xorg.conf.d
# Xorg binary to run
XorgBinary=/usr/lib/xorg/Xorg

## Client options. Will take effect on the next optirun executed.
[optirun]
# Acceleration/ rendering bridge, possible values are auto, virtualgl and
# primus.
Bridge=auto
# The method used for VirtualGL to transport frames between X servers.
# Possible values are proxy, jpeg, rgb, xv and yuv.
VGLTransport=proxy
# List of paths which are searched for the primus libGL.so.1 when using
# the primus bridge
PrimusLibraryPath=/usr/lib/x86_64-linux-gnu/primus:/usr/lib/i386-linux-gnu/primus:/usr/lib/primus:/usr/lib32/primus
# Should the program run under optirun even if Bumblebee server or nvidia card
# is not available?
AllowFallbackToIGC=false


# Driver-specific settings are grouped under [driver-NAME]. The sections are
# parsed if the Driver setting in [bumblebeed] is set to NAME (or if auto-
# detection resolves to NAME).
# PMMethod: method to use for saving power by disabling the nvidia card, valid
# values are: auto - automatically detect which PM method to use
#         bbswitch - new in BB 3, recommended if available
#       switcheroo - vga_switcheroo method, use at your own risk
#             none - disable PM completely
# https://github.com/Bumblebee-Project/Bumblebee/wiki/Comparison-of-PM-methods

## Section with nvidia driver specific options, only parsed if Driver=nvidia
[driver-nvidia]
# Module name to load, defaults to Driver if empty or unset
KernelDriver=nvidia-current
PMMethod=auto
# colon-separated path to the nvidia libraries
LibraryPath=/usr/lib/x86_64-linux-gnu/nvidia:/usr/lib/i386-linux-gnu/nvidia:/usr/lib/nvidia
# comma-separated path of the directory containing nvidia_drv.so and the
# default Xorg modules path
XorgModulePath=/usr/lib/nvidia/nvidia,/usr/lib/xorg/modules
XorgConfFile=/etc/bumblebee/xorg.conf.nvidia

## Section with nouveau driver specific options, only parsed if Driver=nouveau
[driver-nouveau]
KernelDriver=nouveau
PMMethod=auto
XorgConfFile=/etc/bumblebee/xorg.conf.nouveau

[  1936.684] 
X.Org X Server 1.19.2
Release Date: 2017-03-02
[  1936.684] X Protocol Version 11, Revision 0
[  1936.684] Build Operating System: Linux 4.9.0-4-amd64 x86_64 Debian
[  1936.684] Current Operating System: Linux debian 4.9.0-4-amd64 #1 SMP Debian 4.9.51-1 (2017-09-28) x86_64
[  1936.684] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-4-amd64 root=UUID=6b2869bc-40c2-4ef3-9279-b84bbf1de635 ro quiet
[  1936.684] Build Date: 16 October 2017  08:19:45AM
[  1936.684] xorg-server 2:1.19.2-1+deb9u2 (https://www.debian.org/support) 
[  1936.684] Current version of pixman: 0.34.0
[  1936.684]     Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
[  1936.684] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1936.684] (==) Log file: "/var/log/Xorg.8.log", Time: Wed Nov  1 17:34:12 2017
[  1936.684] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[  1936.684] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[  1936.684] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1936.685] (==) ServerLayout "Layout0"
[  1936.685] (==) No screen section available. Using defaults.
[  1936.685] (**) |-->Screen "Default Screen Section" (0)
[  1936.685] (**) |   |-->Monitor "<default monitor>"
[  1936.685] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
[  1936.685] (**) |   |-->Device "DiscreteNvidia"
[  1936.685] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
[  1936.685] (**) Option "AutoAddDevices" "false"
[  1936.685] (**) Option "AutoAddGPU" "false"
[  1936.685] (**) Not automatically adding devices
[  1936.685] (==) Automatically enabling devices
[  1936.685] (**) Not automatically adding GPU devices
[  1936.685] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  1936.685] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[  1936.685]     Entry deleted from font path.
[  1936.685] (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    built-ins
[  1936.685] (++) ModulePath set to "/usr/lib/nvidia/nvidia,/usr/lib/xorg/modules"
[  1936.685] (==) |-->Input Device "<default pointer>"
[  1936.685] (==) |-->Input Device "<default keyboard>"
[  1936.685] (==) The core pointer device wasn't specified explicitly in the layout.
    Using the default mouse configuration.
[  1936.685] (==) The core keyboard device wasn't specified explicitly in the layout.
    Using the default keyboard configuration.
[  1936.685] (II) Loader magic: 0x5584a694be00
[  1936.685] (II) Module ABI versions:
[  1936.685]     X.Org ANSI C Emulation: 0.4
[  1936.685]     X.Org Video Driver: 23.0
[  1936.685]     X.Org XInput driver : 24.1
[  1936.685]     X.Org Server Extension : 10.0
[  1936.686] (--) using VT number 7

[  1936.686] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[  1936.686] (II) xfree86: Adding drm device (/dev/dri/card0)
[  1936.687] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[  1936.687] (--) PCI:*(0:8:0:0) 10de:1299:1028:06b0 rev 161, Mem @ 0xa9000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[  1936.687] (II) LoadModule: "glx"
[  1936.687] (II) Loading /usr/lib/nvidia/nvidia/libglx.so
[  1936.691] (II) Module glx: vendor="NVIDIA Corporation"
[  1936.691]     compiled for 4.0.2, module version = 1.0.0
[  1936.691]     Module class: X.Org Server Extension
[  1936.691] (II) NVIDIA GLX Module  375.82  Wed Jul 19 20:30:13 PDT 2017
[  1936.691] (II) LoadModule: "nvidia"
[  1936.691] (II) Loading /usr/lib/nvidia/nvidia/nvidia_drv.so
[  1936.691] (II) Module nvidia: vendor="NVIDIA Corporation"
[  1936.691]     compiled for 4.0.2, module version = 1.0.0
[  1936.691]     Module class: X.Org Video Driver
[  1936.691] (II) LoadModule: "mouse"
[  1936.691] (WW) Warning, couldn't open module mouse
[  1936.691] (II) UnloadModule: "mouse"
[  1936.691] (II) Unloading mouse
[  1936.691] (EE) Failed to load module "mouse" (module does not exist, 0)
[  1936.691] (II) LoadModule: "kbd"
[  1936.691] (WW) Warning, couldn't open module kbd
[  1936.691] (II) UnloadModule: "kbd"
[  1936.691] (II) Unloading kbd
[  1936.691] (EE) Failed to load module "kbd" (module does not exist, 0)
[  1936.692] (II) NVIDIA dlloader X Driver  375.82  Wed Jul 19 20:05:50 PDT 2017
[  1936.692] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[  1936.692] (II) Loading sub module "fb"
[  1936.692] (II) LoadModule: "fb"
[  1936.692] (II) Loading /usr/lib/xorg/modules/libfb.so
[  1936.692] (II) Module fb: vendor="X.Org Foundation"
[  1936.692]     compiled for 1.19.2, module version = 1.0.0
[  1936.692]     ABI class: X.Org ANSI C Emulation, version 0.4
[  1936.692] (II) Loading sub module "wfb"
[  1936.692] (II) LoadModule: "wfb"
[  1936.692] (II) Loading /usr/lib/xorg/modules/libwfb.so
[  1936.692] (II) Module wfb: vendor="X.Org Foundation"
[  1936.692]     compiled for 1.19.2, module version = 1.0.0
[  1936.692]     ABI class: X.Org ANSI C Emulation, version 0.4
[  1936.692] (II) Loading sub module "ramdac"
[  1936.692] (II) LoadModule: "ramdac"
[  1936.692] (II) Module "ramdac" already built-in
[  1936.692] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
[  1936.692] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[  1936.692] (==) NVIDIA(0): RGB weight 888
[  1936.692] (==) NVIDIA(0): Default visual is TrueColor
[  1936.692] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[  1936.692] (**) NVIDIA(0): Option "NoLogo" "true"
[  1936.692] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[  1936.692] (**) NVIDIA(0): Option "UseEDID" "false"
[  1936.692] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[  1936.692] (**) NVIDIA(0): Enabling 2D acceleration
[  1936.692] (**) NVIDIA(0): Ignoring EDIDs
[  1936.692] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[  1936.692] (**) NVIDIA(0):     mode
[  1936.695] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA GPU at PCI:8:0:0.  Please
[  1936.695] (EE) NVIDIA(GPU-0):     check your system's kernel log for additional error
[  1936.695] (EE) NVIDIA(GPU-0):     messages and refer to Chapter 8: Common Problems in the
[  1936.695] (EE) NVIDIA(GPU-0):     README for additional information.
[  1936.695] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA graphics device!
[  1936.695] (EE) NVIDIA(0): Failing initialization of X screen 0
[  1936.695] (II) UnloadModule: "nvidia"
[  1936.695] (II) UnloadSubModule: "wfb"
[  1936.695] (II) UnloadSubModule: "fb"
[  1936.695] (EE) Screen(s) found, but none have a usable configuration.
[  1936.695] (EE) 
Fatal server error:
[  1936.695] (EE) no screens found(EE) 
[  1936.695] (EE) 
Please consult the The X.Org Foundation support 
     at http://wiki.x.org
 for help. 
[  1936.695] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
[  1936.695] (EE) 
[  1936.695] (EE) Server terminated with error (1). Closing log file.

Section "ServerLayout"
    Identifier  "Layout0"
    Option      "AutoAddDevices" "false"
    Option      "AutoAddGPU" "false"
EndSection

Section "Device"
    Identifier  "DiscreteNvidia"
    Driver      "nvidia"
    VendorName  "NVIDIA Corporation"

#   If the X server does not automatically detect your VGA device,
#   you can manually set it here.
#   To get the BusID prop, run `lspci | egrep 'VGA|3D'` and input the data
#   as you see in the commented example.
#   This Setting may be needed in some platforms with more than one
#   nvidia card, which may confuse the proprietary driver (e.g.,
#   trying to take ownership of the wrong device). Also needed on Ubuntu 13.04.
#   BusID "PCI:01:00:0"

#   Setting ProbeAllGpus to false prevents the new proprietary driver
#   instance spawned to try to control the integrated graphics card,
#   which is already being managed outside bumblebee.
#   This option doesn't hurt and it is required on platforms running
#   more than one nvidia graphics card with the proprietary driver.
#   (E.g. Macbook Pro pre-2010 with nVidia 9400M + 9600M GT).
#   If this option is not set, the new Xorg may blacken the screen and
#   render it unusable (unless you have some way to run killall Xorg).
    Option "ProbeAllGpus" "false"

    Option "NoLogo" "true"
    Option "UseEDID" "false"
    Option "UseDisplayDevice" "none"
EndSection

# Collection of quirks and blacklist/whitelists for specific devices.


# Accelerometer device, posts data through ABS_X/ABS_Y, making X unusable
# http://bugs.freedesktop.org/show_bug.cgi?id=22442 
Section "InputClass"
        Identifier "ThinkPad HDAPS accelerometer blacklist"
        MatchProduct "ThinkPad HDAPS accelerometer data"
        Option "Ignore" "on"
EndSection

# https://bugzilla.redhat.com/show_bug.cgi?id=523914
# Mouse does not move in PV Xen guest
# Explicitly tell evdev to not ignore the absolute axes.
Section "InputClass"
        Identifier "Xen Virtual Pointer axis blacklist"
        MatchProduct "Xen Virtual Pointer"
        Option "IgnoreAbsoluteAxes" "off"
        Option "IgnoreRelativeAxes" "off"
EndSection

# https://bugs.freedesktop.org/show_bug.cgi?id=55867
# Bug 55867 - Doesn't know how to tag XI_TRACKBALL
Section "InputClass"
        Identifier "Tag trackballs as XI_TRACKBALL"
        MatchProduct "trackball"
        MatchDriver "evdev"
        Option "TypeName" "TRACKBALL"
EndSection

# https://bugs.freedesktop.org/show_bug.cgi?id=62831
# Bug 62831 - Mionix Naos 5000 mouse detected incorrectly
Section "InputClass"
        Identifier "Tag Mionix Naos 5000 mouse XI_MOUSE"
        MatchProduct "La-VIEW Technology Naos 5000 Mouse"
        MatchDriver "evdev"
        Option "TypeName" "MOUSE"
EndSection

[   54.886969] [ERROR]Cannot access secondary GPU - error: [XORG] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA GPU at PCI:8:0:0.  Please

[   54.887012] [ERROR]Aborting because fallback start is disabled.

[   18.081630] bbswitch: loading out-of-tree module taints kernel.
[   18.081867] bbswitch: version 0.8
[   18.081873] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[   18.081880] bbswitch: Found discrete VGA device 0000:08:00.0: \_SB_.PCI0.RP05.D030
[   18.081890] bbswitch: failed to evaluate \_SB_.PCI0.RP05.D030._DSM {0xF8,0xD8,0x86,0xA4,0xDA,0x0B,0x1B,0x47,0xA7,0x2B,0x60,0x42,0xA6,0xB5,0xBE,0xE0} 0x100 0x0 {0x00,0x00,0x00,0x00}: AE_NOT_FOUND
[   18.081895] bbswitch: failed to evaluate \_SB_.PCI0.RP05.D030._DSM {0xA0,0xA0,0x95,0x9D,0x60,0x00,0x48,0x4D,0xB3,0x4D,0x7E,0x5F,0xEA,0x12,0x9F,0xD4} 0x102 0x0 {0x00,0x00,0x00,0x00}: AE_NOT_FOUND
[   18.081903] ACPI Warning: \_SB.PCI0.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160831/nsarguments-95)
[   18.081963] bbswitch: No suitable _DSM call found.