Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
#1 2018-01-09 17:58:49
r@f@l - Użytkownik
- r@f@l
- Użytkownik
- Zarejestrowany: 2018-01-09
karta wi-fi usb mt7601u
witam jestem nowym użytkownikiem systemu debiana 9 net-instal na terminalu hp HP T5740. Zakupiłem sobie kartę wi-fi mt7601u dograłem sterowniki i nie wiem co dalej robić. Nie wiem czy poprawnie się zainstalowały. Z góry dziękuje za pomoc.
dodam co mi pokazało polecenie dmesg
Kod:
root@debian:~# dmesg
[ 0.000000] Linux version 4.9.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18) ) #1 SMP Debian 4.9.65-3+deb9u1 (2017-12-23)
[ 0.000000] Disabled fast string operations
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007bc9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007bca0000-0x000000007bcadfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007bcae000-0x000000007bccffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007bcd0000-0x000000007bcdffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007bced000-0x000000007bdfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Hewlett-Packard hp t5740/3641h, BIOS 786R8 v1.04 03/22/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7bca0 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DFFFF uncachable
[ 0.000000] E0000-E7FFF write-through
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask 080000000 write-back
[ 0.000000] 1 base 07BD00000 mask 0FFF00000 uncachable
[ 0.000000] 2 base 07BE00000 mask 0FFE00000 uncachable
[ 0.000000] 3 base 07C000000 mask 0FC000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [c00ff780]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x0bdfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] BRK [0x0b997000, 0x0b997fff] PGTABLE
[ 0.000000] BRK [0x0b998000, 0x0b999fff] PGTABLE
[ 0.000000] BRK [0x0b99a000, 0x0b99afff] PGTABLE
[ 0.000000] BRK [0x0b99b000, 0x0b99bfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35dc5000-0x36ed9fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FA5E0 000014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 0x000000007BCA0000 00003C (v01 032211 RSDT1151 20110322 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x000000007BCA0200 000084 (v01 032211 FACP1151 20110322 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x000000007BCA0430 006244 (v01 40HV0 40HV0104 00000104 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000007BCAE000 000040
[ 0.000000] ACPI: APIC 0x000000007BCA0390 00005C (v01 032211 APIC1151 20110322 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x000000007BCA03F0 00003C (v01 032211 OEMMCFG 20110322 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x000000007BCAE040 000072 (v01 032211 OEMB1151 20110322 MSFT 00000097)
[ 0.000000] ACPI: GSCI 0x000000007BCAE0C0 002024 (v01 032211 GMCHSCI 20110322 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x000000007BCB09F0 0004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1090MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] Normal [mem 0x0000000001000000-0x00000000379fdfff]
[ 0.000000] HighMem [mem 0x00000000379fe000-0x000000007bc9ffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000007bc9ffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007bc9ffff]
[ 0.000000] On node 0 totalpages: 506942
[ 0.000000] free_area_init_node: node 0, pgdat cb7e67c0, node_mem_map f4c55024
[ 0.000000] DMA zone: 36 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 1967 pages used for memmap
[ 0.000000] Normal zone: 223742 pages, LIFO batch:31
[ 0.000000] HighMem zone: 279202 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] Reserving Intel graphics memory at 0x000000007c000000-0x000000007fffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] e820: [mem 0x80000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] percpu: Embedded 20 pages/cpu @f79d3000 s50636 r0 d31284 u81920
[ 0.000000] pcpu-alloc: s50636 r0 d31284 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 504939
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-4-686-pae root=/dev/sda1 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:0007bca0)
[ 0.000000] Initializing Movable for node 0 (00000000:00000000)
[ 0.000000] Memory: 1981548K/2027768K available (5827K kernel code, 646K rwdata, 1716K rodata, 752K init, 456K bss, 46220K reserved, 0K cma-reserved, 1116808K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
.init : 0xcb803000 - 0xcb8bf000 ( 752 kB)
.data : 0xcb5b0fd4 - 0xcb801ac0 (2370 kB)
.text : 0xcb000000 - 0xcb5b0fd4 (5827 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
[ 0.000000] NR_IRQS:2304 nr_irqs:440 16
[ 0.000000] CPU 0 irqstacks, hard=f742e000 soft=f7430000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1662.537 MHz processor
[ 0.004017] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.07 BogoMIPS (lpj=6650148)
[ 0.004024] pid_max: default: 32768 minimum: 301
[ 0.004092] ACPI: Core revision 20160831
[ 0.020056] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.020154] Security Framework initialized
[ 0.020158] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.020172] AppArmor: AppArmor disabled by boot time parameter
[ 0.020215] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.020220] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.020856] Disabled fast string operations
[ 0.020861] CPU: Physical Processor ID: 0
[ 0.020863] CPU: Processor Core ID: 0
[ 0.020870] mce: CPU supports 5 MCE banks
[ 0.020881] CPU0: Thermal monitoring enabled (TM2)
[ 0.020888] process: using mwait in idle threads
[ 0.020900] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 0
[ 0.020903] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[ 0.021219] Freeing SMP alternatives memory: 24K
[ 0.024024] ftrace: allocating 24047 entries in 47 pages
[ 0.040180] smpboot: Max logical packages: 2
[ 0.040191] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.040624] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.084000] APIC calibration not consistent with PM-Timer: 116ms instead of 100ms
[ 0.084000] APIC delta adjusted to PM-Timer: 1039060 (1205384)
[ 0.084000] smpboot: CPU0: Intel(R) Atom(TM) CPU N280 @ 1.66GHz (family: 0x6, model: 0x1c, stepping: 0x2)
[ 0.084000] Performance Events: PEBS fmt0+, LBR disabled due to erratumAtom events, Intel PMU driver.
[ 0.084000] ... version: 3
[ 0.084000] ... bit width: 40
[ 0.084000] ... generic registers: 2
[ 0.084000] ... value mask: 000000ffffffffff
[ 0.084000] ... max period: 000000007fffffff
[ 0.084000] ... fixed-purpose events: 3
[ 0.084000] ... event mask: 0000000700000003
[ 0.084000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.084000] CPU 1 irqstacks, hard=f757e000 soft=f7580000
[ 0.084000] x86: Booting SMP configuration:
[ 0.084000] .... node #0, CPUs: #1
[ 0.008000] Initializing CPU#1
[ 0.008000] Disabled fast string operations
[ 0.084143] x86: Booted up 1 node, 2 CPUs
[ 0.084143] smpboot: Total of 2 processors activated (6650.14 BogoMIPS)
[ 0.084761] devtmpfs: initialized
[ 0.084761] PM: Registering ACPI NVS region [mem 0x7bcae000-0x7bccffff] (139264 bytes)
[ 0.084761] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.084761] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.084761] pinctrl core: initialized pinctrl subsystem
[ 0.084761] NET: Registered protocol family 16
[ 0.096016] cpuidle: using governor ladder
[ 0.112014] cpuidle: using governor menu
[ 0.112108] ACPI: bus type PCI registered
[ 0.112113] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.112303] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.112308] PCI: not using MMCONFIG
[ 0.112311] PCI: Using configuration type 1 for base access
[ 0.128123] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.128220] ACPI: Added _OSI(Module Device)
[ 0.128224] ACPI: Added _OSI(Processor Device)
[ 0.128227] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.128229] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.138254] ACPI: Dynamic OEM Table Load:
[ 0.138270] ACPI: SSDT 0x00000000F756E600 0001FA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.138820] ACPI: Dynamic OEM Table Load:
[ 0.138835] ACPI: SSDT 0x00000000F756F000 000594 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.139949] ACPI: Dynamic OEM Table Load:
[ 0.139960] ACPI: SSDT 0x00000000F7565F00 0000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
[ 0.140363] ACPI: Dynamic OEM Table Load:
[ 0.140373] ACPI: SSDT 0x00000000F7557780 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
[ 0.142127] ACPI: Interpreter enabled
[ 0.142168] ACPI: (supports S0 S5)
[ 0.142172] ACPI: Using IOAPIC for interrupt routing
[ 0.142272] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.146256] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.146259] PCI: Using MMCONFIG for extended config space
[ 0.146270] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.170612] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.170626] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.170639] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.171486] PCI host bridge to bus 0000:00
[ 0.171493] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.171498] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.171503] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.171507] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
[ 0.171512] pci_bus 0000:00: root bus resource [mem 0x7be00000-0xdfffffff window]
[ 0.171516] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window]
[ 0.171521] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.171544] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.171858] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.171879] pci 0000:00:02.0: reg 0x10: [mem 0xfe400000-0xfe7fffff 64bit]
[ 0.171892] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.171902] pci 0000:00:02.0: reg 0x20: [io 0xc080-0xc087]
[ 0.172254] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.172272] pci 0000:00:02.1: reg 0x10: [mem 0xfe900000-0xfe9fffff 64bit]
[ 0.172605] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.172659] pci 0000:00:1a.0: reg 0x20: [io 0xc800-0xc81f]
[ 0.172906] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.173065] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.173118] pci 0000:00:1a.1: reg 0x20: [io 0xc480-0xc49f]
[ 0.173358] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.173518] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.173573] pci 0000:00:1a.2: reg 0x20: [io 0xc400-0xc41f]
[ 0.173812] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 0.173984] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.174010] pci 0000:00:1a.7: reg 0x10: [mem 0xfeaff400-0xfeaff7ff]
[ 0.174118] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.174275] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.174438] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.174464] pci 0000:00:1b.0: reg 0x10: [mem 0xfeaf8000-0xfeafbfff 64bit]
[ 0.174563] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.174857] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.174951] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.175114] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.175274] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[ 0.175367] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.175530] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.175693] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.175793] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.175956] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.176138] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.176195] pci 0000:00:1d.0: reg 0x20: [io 0xd000-0xd01f]
[ 0.176441] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.176607] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.176660] pci 0000:00:1d.1: reg 0x20: [io 0xcc00-0xcc1f]
[ 0.176900] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.177058] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.177111] pci 0000:00:1d.2: reg 0x20: [io 0xc880-0xc89f]
[ 0.177355] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.177524] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.177550] pci 0000:00:1d.7: reg 0x10: [mem 0xfeaff800-0xfeaffbff]
[ 0.177658] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.177815] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.177975] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.178187] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.178352] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[ 0.178747] pci 0000:00:1f.2: [8086:2928] type 00 class 0x01018f
[ 0.178768] pci 0000:00:1f.2: reg 0x10: [io 0xec00-0xec07]
[ 0.178780] pci 0000:00:1f.2: reg 0x14: [io 0xe880-0xe883]
[ 0.178791] pci 0000:00:1f.2: reg 0x18: [io 0xe800-0xe807]
[ 0.178803] pci 0000:00:1f.2: reg 0x1c: [io 0xe480-0xe483]
[ 0.178814] pci 0000:00:1f.2: reg 0x20: [io 0xe400-0xe40f]
[ 0.178826] pci 0000:00:1f.2: reg 0x24: [io 0xe080-0xe08f]
[ 0.179150] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.179173] pci 0000:00:1f.3: reg 0x10: [mem 0xfeaffc00-0xfeaffcff 64bit]
[ 0.179200] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.179491] pci 0000:00:1f.5: [8086:292d] type 00 class 0x010185
[ 0.179511] pci 0000:00:1f.5: reg 0x10: [io 0xdc00-0xdc07]
[ 0.179523] pci 0000:00:1f.5: reg 0x14: [io 0xd880-0xd883]
[ 0.179535] pci 0000:00:1f.5: reg 0x18: [io 0xd800-0xd807]
[ 0.179547] pci 0000:00:1f.5: reg 0x1c: [io 0xd480-0xd483]
[ 0.179558] pci 0000:00:1f.5: reg 0x20: [io 0xd400-0xd40f]
[ 0.179570] pci 0000:00:1f.5: reg 0x24: [io 0xd080-0xd08f]
[ 0.179991] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.180140] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.180293] pci 0000:04:00.0: [14e4:1692] type 00 class 0x020000
[ 0.180331] pci 0000:04:00.0: reg 0x10: [mem 0xfebf0000-0xfebfffff 64bit]
[ 0.180502] pci 0000:04:00.0: PME# supported from D3hot D3cold
[ 0.192041] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 0.192051] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.192211] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.192226] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.192231] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.192235] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.192240] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
[ 0.192245] pci 0000:00:1e.0: bridge window [mem 0x7be00000-0xdfffffff window] (subtractive decode)
[ 0.192249] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff window] (subtractive decode)
[ 0.192278] pci_bus 0000:00: on NUMA node 0
[ 0.194799] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.194983] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
[ 0.195161] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 *12 14 15)
[ 0.195342] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12 14 15)
[ 0.195522] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
[ 0.195705] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15)
[ 0.195886] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 *14 15)
[ 0.196088] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 14 *15)
[ 0.196293] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.196690] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.196690] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.196690] vgaarb: loaded
[ 0.196690] vgaarb: bridge control possible 0000:00:02.0
[ 0.196690] PCI: Using ACPI for IRQ routing
[ 0.204116] PCI: pci_cache_line_size set to 64 bytes
[ 0.204200] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.204207] e820: reserve RAM buffer [mem 0x7bca0000-0x7bffffff]
[ 0.204686] clocksource: Switched to clocksource refined-jiffies
[ 0.227689] VFS: Disk quotas dquot_6.6.0
[ 0.227742] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.228048] pnp: PnP ACPI init
[ 0.228310] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.228322] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.228524] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.229301] pnp 00:02: [dma 0 disabled]
[ 0.229491] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.230568] system 00:03: [io 0x0a00-0x0a7f] has been reserved
[ 0.230578] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.231088] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.231094] system 00:04: [io 0x0800-0x087f] has been reserved
[ 0.231105] system 00:04: [io 0x0500-0x053f] has been reserved
[ 0.231112] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.231118] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.231123] system 00:04: [mem 0xfed40000-0xfed8ffff] has been reserved
[ 0.231131] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.231464] system 00:05: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.231473] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.231851] system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.231857] system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.231865] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.232107] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.232116] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.232748] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.232754] system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.232760] system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.232765] system 00:08: [mem 0x00100000-0x7bdfffff] could not be reserved
[ 0.232771] system 00:08: [mem 0xfed90000-0xffffffff] could not be reserved
[ 0.232779] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.233172] pnp: PnP ACPI: found 9 devices
[ 0.233178] PnPBIOS: Disabled
[ 0.275366] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.275396] clocksource: Switched to clocksource acpi_pm
[ 0.275434] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.275443] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.275449] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
[ 0.275462] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.275468] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 0.275474] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
[ 0.275487] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 04] add_size 1000
[ 0.275493] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[ 0.275523] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.275528] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.275534] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.275539] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.275544] pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.275549] pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.275555] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.275560] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.275565] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.275571] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.275576] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.275581] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.275586] pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.275591] pci 0000:00:1c.4: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.275596] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.275601] pci 0000:00:1c.5: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.275615] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7be00000-0x7bffffff]
[ 0.275631] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
[ 0.275638] pci 0000:00:1c.4: BAR 14: assigned [mem 0x80200000-0x803fffff]
[ 0.275651] pci 0000:00:1c.4: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
[ 0.275664] pci 0000:00:1c.5: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref]
[ 0.275673] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.275680] pci 0000:00:1c.4: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.275687] pci 0000:00:1c.5: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.275697] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.275703] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.275711] pci 0000:00:1c.0: bridge window [mem 0x7be00000-0x7bffffff]
[ 0.275718] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
[ 0.275726] pci 0000:00:1c.4: PCI bridge to [bus 03]
[ 0.275731] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 0.275739] pci 0000:00:1c.4: bridge window [mem 0x80200000-0x803fffff]
[ 0.275745] pci 0000:00:1c.4: bridge window [mem 0x80400000-0x805fffff 64bit pref]
[ 0.275754] pci 0000:00:1c.5: PCI bridge to [bus 04]
[ 0.275759] pci 0000:00:1c.5: bridge window [io 0x3000-0x3fff]
[ 0.275766] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.275773] pci 0000:00:1c.5: bridge window [mem 0x80600000-0x807fffff 64bit pref]
[ 0.275782] pci 0000:00:1e.0: PCI bridge to [bus 01]
[ 0.275798] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.275803] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.275807] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.275811] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.275815] pci_bus 0000:00: resource 8 [mem 0x7be00000-0xdfffffff window]
[ 0.275820] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff window]
[ 0.275824] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.275828] pci_bus 0000:02: resource 1 [mem 0x7be00000-0x7bffffff]
[ 0.275833] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
[ 0.275837] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.275841] pci_bus 0000:03: resource 1 [mem 0x80200000-0x803fffff]
[ 0.275846] pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
[ 0.275850] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.275854] pci_bus 0000:04: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.275859] pci_bus 0000:04: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
[ 0.275863] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7 window]
[ 0.275868] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff window]
[ 0.275872] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.275876] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff window]
[ 0.275881] pci_bus 0000:01: resource 8 [mem 0x7be00000-0xdfffffff window]
[ 0.275885] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfed8ffff window]
[ 0.275885] NET: Registered protocol family 2
[ 0.275885] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.275885] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.275885] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.275885] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.275885] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.275885] NET: Registered protocol family 1
[ 0.275885] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.276578] PCI: CLS 32 bytes, default 64
[ 0.276735] Unpacking initramfs...
[ 1.139461] Freeing initrd memory: 17492K
[ 1.140793] audit: initializing netlink subsys (disabled)
[ 1.140840] audit: type=2000 audit(1515516319.139:1): initialized
[ 1.141884] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 1.141944] zbud: loaded
[ 1.143866] bounce: pool size: 64 pages
[ 1.143926] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 1.144038] io scheduler noop registered
[ 1.144042] io scheduler deadline registered
[ 1.144100] io scheduler cfq registered (default)
[ 1.144325] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[ 1.144789] pcieport 0000:00:1c.4: enabling device (0104 -> 0107)
[ 1.145123] pcieport 0000:00:1c.5: enabling device (0106 -> 0107)
[ 1.145572] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.145596] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.145658] intel_idle: MWAIT substates: 0x20220
[ 1.145661] intel_idle: v0.4.1 model 0x1C
[ 1.145679] tsc: Marking TSC unstable due to TSC halts in idle states deeper than C2
[ 1.145942] intel_idle: lapic_timer_reliable_states 0x2
[ 1.146231] GHES: HEST is not enabled!
[ 1.146372] isapnp: Scanning for PnP cards...
[ 1.499515] isapnp: No Plug & Play device found
[ 1.499778] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.520339] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.521722] Linux agpgart interface v0.103
[ 1.522964] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.526135] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.526153] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.526736] mousedev: PS/2 mouse device common for all mice
[ 1.526884] rtc_cmos 00:01: RTC can wake from S4
[ 1.527164] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.527201] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram
[ 1.527284] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.528654] NET: Registered protocol family 10
[ 1.529253] mip6: Mobile IPv6
[ 1.529258] NET: Registered protocol family 17
[ 1.529266] mpls_gso: MPLS GSO support
[ 1.529862] microcode: sig=0x106c2, pf=0x4, revision=0x218
[ 1.530016] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.530025] Using IPI No-Shortcut mode
[ 1.530542] registered taskstats version 1
[ 1.530581] zswap: loaded using pool lzo/zbud
[ 1.530797] ima: No TPM chip found, activating TPM-bypass!
[ 1.531515] rtc_cmos 00:01: setting system clock to 2018-01-09 16:45:19 UTC (1515516319)
[ 1.531667] PM: Hibernation image not present or could not be loaded.
[ 1.532252] Freeing unused kernel memory: 752K
[ 1.532436] Write protecting the kernel text: 5828k
[ 1.532573] Write protecting the kernel read-only data: 1724k
[ 1.532576] NX-protecting the kernel data: 4412k
[ 1.532976] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.577622] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.578069] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.582171] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.583034] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.586201] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.586493] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.588146] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.588440] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.588721] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.588999] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.730131] ACPI: bus type USB registered
[ 1.730280] usbcore: registered new interface driver usbfs
[ 1.730351] usbcore: registered new interface driver hub
[ 1.730557] usbcore: registered new device driver usb
[ 1.732679] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.734126] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.734520] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.734550] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.734569] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 1.734647] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800
[ 1.734737] ehci-pci: EHCI PCI platform driver
[ 1.736456] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.736465] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.736471] usb usb1: Product: UHCI Host Controller
[ 1.736476] usb usb1: Manufacturer: Linux 4.9.0-4-686-pae uhci_hcd
[ 1.736481] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.737259] hub 1-0:1.0: USB hub found
[ 1.737296] hub 1-0:1.0: 2 ports detected
[ 1.738870] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.738898] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 1.738923] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 1.738996] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c480
[ 1.740200] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.740208] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.740213] usb usb2: Product: UHCI Host Controller
[ 1.740219] usb usb2: Manufacturer: Linux 4.9.0-4-686-pae uhci_hcd
[ 1.740224] usb usb2: SerialNumber: 0000:00:1a.1
[ 1.740968] hub 2-0:1.0: USB hub found
[ 1.741007] hub 2-0:1.0: 2 ports detected
[ 1.746122] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 1.746153] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 3
[ 1.746184] ehci-pci 0000:00:1a.7: debug port 1
[ 1.750165] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 1.750231] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfeaff400
[ 1.751213] pps_core: LinuxPPS API ver. 1 registered
[ 1.751218] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.752391] PTP clock support registered
[ 1.755416] tg3.c:v3.137 (May 11, 2014)
[ 1.764180] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.764455] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.764463] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.764468] usb usb3: Product: EHCI Host Controller
[ 1.764473] usb usb3: Manufacturer: Linux 4.9.0-4-686-pae ehci_hcd
[ 1.764478] usb usb3: SerialNumber: 0000:00:1a.7
[ 1.765254] hub 3-0:1.0: USB hub found
[ 1.765335] hub 3-0:1.0: 6 ports detected
[ 1.767428] libphy: tg3 mdio bus: probed
[ 1.771252] SCSI subsystem initialized
[ 1.778701] libata version 3.00 loaded.
[ 1.792389] hub 1-0:1.0: USB hub found
[ 1.792434] hub 1-0:1.0: 2 ports detected
[ 1.820358] hub 2-0:1.0: USB hub found
[ 1.820402] hub 2-0:1.0: 2 ports detected
[ 1.821246] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.821270] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 1.821295] ehci-pci 0000:00:1d.7: debug port 1
[ 1.825266] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 1.825377] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfeaff800
[ 1.840107] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.840366] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.840373] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.840378] usb usb4: Product: EHCI Host Controller
[ 1.840383] usb usb4: Manufacturer: Linux 4.9.0-4-686-pae ehci_hcd
[ 1.840388] usb usb4: SerialNumber: 0000:00:1d.7
[ 1.841076] hub 4-0:1.0: USB hub found
[ 1.841108] hub 4-0:1.0: 6 ports detected
[ 1.842455] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.842480] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.842498] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 1.842565] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000c400
[ 1.842872] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.842879] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.842885] usb usb5: Product: UHCI Host Controller
[ 1.842890] usb usb5: Manufacturer: Linux 4.9.0-4-686-pae uhci_hcd
[ 1.842895] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.843596] hub 5-0:1.0: USB hub found
[ 1.843630] hub 5-0:1.0: 2 ports detected
[ 1.844662] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.845571] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.845597] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.845623] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.845663] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d000
[ 1.847451] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.847459] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.847465] usb usb6: Product: UHCI Host Controller
[ 1.847470] usb usb6: Manufacturer: Linux 4.9.0-4-686-pae uhci_hcd
[ 1.847476] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.850543] Broadcom BCM57780 400:01: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=400:01, irq=-1)
[ 1.851946] tg3 0000:04:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address 9c:8e:99:d3:c5:57
[ 1.851955] tg3 0000:04:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.851962] tg3 0000:04:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.852330] hub 6-0:1.0: USB hub found
[ 1.852813] hub 6-0:1.0: 2 ports detected
[ 1.853763] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.853788] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.853804] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.853843] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000cc00
[ 1.854099] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.854107] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.854112] usb usb7: Product: UHCI Host Controller
[ 1.854117] usb usb7: Manufacturer: Linux 4.9.0-4-686-pae uhci_hcd
[ 1.854122] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.854831] hub 7-0:1.0: USB hub found
[ 1.855383] hub 7-0:1.0: 2 ports detected
[ 1.856635] ata_piix 0000:00:1f.2: version 2.13
[ 1.856909] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 1.869359] scsi host0: ata_piix
[ 1.869891] scsi host1: ata_piix
[ 1.870217] ata1: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 19
[ 1.870224] ata2: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 19
[ 1.870574] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.875119] scsi host2: ata_piix
[ 1.875921] scsi host3: ata_piix
[ 1.876318] ata3: SATA max UDMA/133 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 19
[ 1.876325] ata4: SATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 19
[ 1.876828] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.876857] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.876877] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.876917] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c880
[ 1.877257] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.877264] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.877269] usb usb8: Product: UHCI Host Controller
[ 1.877274] usb usb8: Manufacturer: Linux 4.9.0-4-686-pae uhci_hcd
[ 1.877279] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.878047] hub 8-0:1.0: USB hub found
[ 1.878095] hub 8-0:1.0: 2 ports detected
[ 1.978704] tg3 0000:04:00.0 enp4s0: renamed from eth0
[ 2.144072] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x17f6e96259a, max_idle_ns: 440795267565 ns
[ 2.195000] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.205720] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.216421] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.352074] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.372158] random: fast init done
[ 2.372428] ata2.00: CFA: 2GB ATA Flash Disk, AD B61FK, max UDMA/66
[ 2.372433] ata2.00: 4000752 sectors, multi 0: LBA
[ 2.392247] ata2.00: configured for UDMA/66
[ 2.392716] scsi 1:0:0:0: Direct-Access ATA 2GB ATA Flash Di 61FK PQ: 0 ANSI: 5
[ 2.435887] sd 1:0:0:0: [sda] 4000752 512-byte logical blocks: (2.05 GB/1.91 GiB)
[ 2.436160] sd 1:0:0:0: [sda] Write Protect is off
[ 2.436170] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.436259] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.439020] sda: sda1
[ 2.440276] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.572118] usb 6-2: new full-speed USB device number 2 using uhci_hcd
[ 2.781256] usb 6-2: New USB device found, idVendor=0403, idProduct=6001
[ 2.781268] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.781273] usb 6-2: Product: FT232R USB UART
[ 2.781281] usb 6-2: Manufacturer: FTDI
[ 2.781286] usb 6-2: SerialNumber: A8004W7p
[ 3.060193] usb 4-3: new high-speed USB device number 3 using ehci-pci
[ 3.218834] usb 4-3: New USB device found, idVendor=148f, idProduct=7601
[ 3.218841] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.218852] usb 4-3: Product: 802.11 n WLAN
[ 3.218857] usb 4-3: Manufacturer: MediaTek
[ 3.218861] usb 4-3: SerialNumber: 1.0
[ 4.832313] floppy0: no floppy controllers found
[ 5.122198] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.797224] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.823517] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 5.823959] systemd[1]: Detected architecture x86.
[ 5.839671] systemd[1]: Set hostname to <debian>.
[ 6.241253] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 6.241638] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 6.241815] systemd[1]: Listening on Syslog Socket.
[ 6.242016] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.242155] systemd[1]: Listening on udev Kernel Socket.
[ 6.242757] systemd[1]: Created slice System Slice.
[ 6.243098] systemd[1]: Listening on Journal Audit Socket.
[ 6.354944] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 6.904420] systemd-journald[176]: Received request to flush runtime journal from PID 1
[ 7.105519] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 7.105532] ACPI: Power Button [PWRB]
[ 7.105844] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 7.105852] ACPI: Power Button [PWRF]
[ 7.195226] [drm] Initialized
[ 7.286254] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.437513] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 7.458521] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 7.580176] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC272: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:hp
[ 7.580185] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.580192] snd_hda_codec_realtek hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.580197] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 7.580202] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 7.580208] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 7.606052] intel_powerclamp: No package C-state available
[ 7.611417] usbcore: registered new interface driver usbserial
[ 7.611496] usbcore: registered new interface driver usbserial_generic
[ 7.611566] usbserial: USB Serial support registered for generic
[ 7.644693] usbcore: registered new interface driver ftdi_sio
[ 7.644970] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 7.645344] ftdi_sio 6-2:1.0: FTDI USB Serial Device converter detected
[ 7.645524] usb 6-2: Detected FT232RL
[ 7.654071] usb 6-2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 7.659206] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 7.660819] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 7.712568] pci 0000:00:00.0: Intel GM45 Chipset
[ 7.712619] pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 7.712707] pci 0000:00:00.0: detected 65536K stolen memory
[ 7.712801] [drm] Memory usable by graphics device = 2048M
[ 7.712810] [drm] Replacing VGA console driver
[ 7.714090] Console: switching to colour dummy device 80x25
[ 7.738670] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 7.738676] [drm] Driver supports precise vblank timestamp query.
[ 7.747901] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 7.748223] [drm] Skipping LVDS initialization for Hewlett-Packard HP t5740
[ 7.845640] ppdev: user-space parallel port driver
[ 7.857951] [drm] RC6 disabled, disabling runtime PM support
[ 7.869570] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 7.870236] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 7.871295] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 7.879004] iTCO_vendor_support: vendor-support=0
[ 7.881414] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 7.881514] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0860)
[ 7.883501] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.895956] i915 0000:00:02.0: No connectors reported connected with modes
[ 7.895972] [drm] Cannot find any crtc or sizes - going 1024x768
[ 7.903824] fbcon: inteldrmfb (fb0) is primary device
[ 7.906675] Console: switching to colour frame buffer device 128x48
[ 7.921733] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 7.991783] usb 4-3: reset high-speed USB device number 3 using ehci-pci
[ 8.147586] mt7601u 4-3:1.0: ASIC revision: 76010001 MAC revision: 76010500
[ 8.192585] mt7601u 4-3:1.0: Warning: unsupported EEPROM version 0d
[ 8.192597] mt7601u 4-3:1.0: EEPROM ver:0d fae:00
[ 8.392076] random: crng init done
[ 8.451842] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 8.453096] usbcore: registered new interface driver mt7601u
[ 8.471972] mt7601u 4-3:1.0 wlx20e017061594: renamed from wlan0
[ 8.722381] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[ 9.729139] tg3 0000:04:00.0 enp4s0: Link is down
[ 10.464198] floppy0: no floppy controllers found
[ 10.753181] tg3 0000:04:00.0 enp4s0: Link is up at 100 Mbps, full duplex
[ 10.753187] tg3 0000:04:00.0 enp4s0: Flow control is on for TX and on for RX
[ 10.753207] IPv6: ADDRCONF(NETDEV_CHANGE): enp4s0: link becomes ready
[ 10.969447] FS-Cache: Loaded
[ 10.971664] Key type dns_resolver registered
[ 11.282083] FS-Cache: Netfs 'cifs' registered for caching
[ 11.282186] Key type cifs.spnego registered
[ 11.282209] Key type cifs.idmap registeredwkleiłem całość bo nie wiem co jest ważne
Ostatnio edytowany przez r@f@l (2018-01-10 11:09:30)
Offline
#2 2018-01-09 18:12:57
ilin - 
Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: karta wi-fi usb mt7601u
Pokaż co zwróci
Kod:
iwlist wlan0 scan
[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]
Offline
#3 2018-01-09 18:24:50
r@f@l - Użytkownik
- r@f@l
- Użytkownik
- Zarejestrowany: 2018-01-09
Re: karta wi-fi usb mt7601u
niestety nic
Kod:
root@debian:~# iwlist wlan0 scan wlan0 Interface doesn't support scanning.
w pliku interfaces mam tak
Kod:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug enp4s0
iface enp4s0 inet static
address 192.168.1.205
netmask 255.255.255.0
gateway 192.168.1.1
# WiFi Example
auto wlan0
iface wlan0 inet dhcp
wpa-ssid "xxxxx"
wpa-psk "xxxxxx"Ostatnio edytowany przez r@f@l (2018-01-09 18:29:55)
Offline
#4 2018-01-09 18:41:30
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: karta wi-fi usb mt7601u
Wyczyść tę część dotyczącą wifi w tym pliku zrestartuj.
Potem jeszcze raz pokaż poprzednią komendę.
[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]
Offline
#5 2018-01-09 18:44:52
Renia - Użytkownik
- Renia
- Użytkownik
- Zarejestrowany: 2014-08-29
Re: karta wi-fi usb mt7601u
Zasadniczo wystarczy instalacja firmware, czyli pakietu firmware-misc-nonfree, a potem sudo modprobe mt7601u i powinno działać. Do obsługi polecam programy w trybie graficznym - Network Managera lub WiCD.
Instalacja E-Deklaracje na Debianie 64-bit:
https://forum.dug.net.pl/viewtopic.php?pid=301794#p301794
Offline
#6 2018-01-09 18:55:05
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: karta wi-fi usb mt7601u
Kod:
[ 8.471972] mt7601u 4-3:1.0 wlx20e017061594: renamed from wlan0[/quote]
Offline
#7 2018-01-09 19:00:24
r@f@l - Użytkownik
- r@f@l
- Użytkownik
- Zarejestrowany: 2018-01-09
Re: karta wi-fi usb mt7601u
[quote=ilin]Wyczyść tę część dotyczącą wifi w tym pliku zrestartuj.
Potem jeszcze raz pokaż poprzednią komendę.[/quote]
niestety to samo
[quote=Renia]Zasadniczo wystarczy instalacja firmware, czyli pakietu firmware-misc-nonfree, a potem sudo modprobe mt7601u i powinno działać. Do obsługi polecam programy w trybie graficznym - Network Managera lub WiCD.[/quote]
firmware zainstalowane niestety dalej to samo, trybu graficznego nie instaluje bo miejsca mał
Ostatnio edytowany przez r@f@l (2018-01-09 19:03:14)
Offline
#8 2018-01-09 19:04:38
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: karta wi-fi usb mt7601u
[quote=r@f@l][quote=ilin]Wyczyść tę część dotyczącą wifi w tym pliku zrestartuj.
Potem jeszcze raz pokaż poprzednią komendę.[/quote]
niestety to samo[/quote]
Musisz zmienić nazwę interfejsu na tę prawidłową.
Offline
#9 2018-01-09 19:09:41
r@f@l - Użytkownik
- r@f@l
- Użytkownik
- Zarejestrowany: 2018-01-09
Re: karta wi-fi usb mt7601u
czyli co "enp4s0" na wlan0? nie mogą działać 2 połączenia na raz? działam na terminalu przez ssh jak zmienię tą nazwę to strace połączenie ale jak to jest nie zbędne to podepnę się pod monitor
Ostatnio edytowany przez r@f@l (2018-01-09 19:11:46)
Offline
#10 2018-01-09 19:14:33
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: karta wi-fi usb mt7601u
https://forum.dug.net.pl/viewtopic.php?pid=316709#p316709
Używasz SSH, a nie potrafisz nawet sprawdzić nazw interfejsów sieciowych?
Kod:
ip a
Offline
#11 2018-01-09 19:20:36
r@f@l - Użytkownik
- r@f@l
- Użytkownik
- Zarejestrowany: 2018-01-09
Re: karta wi-fi usb mt7601u
wybacz, umiem tylko to czego się nauczyłem. Daruj sobie uszczypliwości bo jak przyjdziesz do mnie z bólem serca to też ci tak powiem
Kod:
root@debian:~# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group defaul t qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp4s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group de fault qlen 1000
link/ether 9c:8e:99:d3:c5:57 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.205/24 brd 192.168.1.255 scope global enp4s0
valid_lft forever preferred_lft forever
inet6 fe80::9e8e:99ff:fed3:c557/64 scope link
valid_lft forever preferred_lft forever
3: wlx20e017061594: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group d efault qlen 1000
link/ether 20:e0:17:06:15:94 brd ff:ff:ff:ff:ff:ffpolecenie daje taki wyniki
Ostatnio edytowany przez r@f@l (2018-01-09 19:23:52)
Offline
#12 2018-01-09 19:22:57
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: karta wi-fi usb mt7601u
No to po co z uporem maniaka skanujesz sieć wlan0, skoro taki interfejs nie istnieje?
Zacznij od:
Kod:
ifup wlx20e017061594
Offline
#13 2018-01-09 19:47:21
r@f@l - Użytkownik
- r@f@l
- Użytkownik
- Zarejestrowany: 2018-01-09
Re: karta wi-fi usb mt7601u
mistrzu czy mógł byś mnie oświecić swoim blaskiem
Offline
#14 2018-01-09 19:57:08
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: karta wi-fi usb mt7601u
[quote=yossarian]
Kod:
[ 8.471972] mt7601u 4-3:1.0 wlx20e017061594: renamed from wlan0[/quote]
[/quote]
Odwrotnie przetłumaczyłem :)
Ma byćKod:
ifconfig wlx20e017061594 up wlist wlx20e017061594 scan
[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]
Offline
#15 2018-01-09 19:58:31
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: karta wi-fi usb mt7601u
[quote=r@f@l]mistrzu czy mógł byś mnie oświecić swoim blaskiem[/quote]
To powinno wystarczyć na początek:
Kod:
ifup wlx20e017061594
@ilin: trochę zamieszania z tymi nowymi nazwami ;)
Offline
#16 2018-01-09 20:03:05
r@f@l - Użytkownik
- r@f@l
- Użytkownik
- Zarejestrowany: 2018-01-09
Re: karta wi-fi usb mt7601u
[quote=ilin][quote=yossarian]
Kod:
[ 8.471972] mt7601u 4-3:1.0 wlx20e017061594: renamed from wlan0[/quote]
[/quote]
Odwrotnie przetłumaczyłem :)
Ma byćKod:
ifconfig wlx20e017061594 up wlist wlx20e017061594 scan[/quote]
teraz to inna bajkaKod:
root@debian:~# iwlist wlx20e017061594 scan wlx20e017061594 Scan completed : Cell 01 - Address: D8:97:BA:84:50:EB Channel:6 Frequency:2.437 GHz (Channel 6) Quality=45/70 Signal level=-65 dBm Encryption key:on ESSID:"multimedia_Multimedia" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s Mode:Master Extra:tsf=000000f9e2e15196 Extra: Last beacon: 824ms ago IE: Unknown: 00156D756C74696D656469615F4D756C74696D65646961 IE: Unknown: 010882848B962430486C IE: Unknown: 030106 IE: Unknown: 050400010100 IE: Unknown: 2A0104 IE: Unknown: 2F0104 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK IE: Unknown: 32040C121860 IE: Unknown: 0B050200100000 IE: Unknown: 2D1AFE191BFFFF000001000000000000000000000000000000000000 IE: Unknown: 3D16060F1600000000000000000000000000000000000000 IE: Unknown: 4A0E14000A002C01C800140005001900 IE: Unknown: 7F080500080000000040 IE: Unknown: DD180050F204104A00011010440001021049000600372A000120 IE: Unknown: DD090010180202000C0000 IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00 IE: Unknown: 46057208010000 Cell 02 - Address: 10:FE:ED:9B:BC:EA Channel:11 Frequency:2.462 GHz (Channel 11) Quality=35/70 Signal level=-75 dBm Encryption key:on ESSID:"OpenWrt" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=0000000e41469a17 Extra: Last beacon: 12ms ago IE: Unknown: 00074F70656E577274 IE: Unknown: 010882848B960C121824 IE: Unknown: 03010B IE: Unknown: 0706504C20010D14 IE: Unknown: 2A0100 IE: Unknown: 32043048606C IE: WPA Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK IE: Unknown: 2D1AED111BFFFFFF0000000000000000000100000000000000000000 IE: Unknown: 3D160B000400000000000000000000000000000000000000 IE: Unknown: 7F080000000000000040 IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00 root@debian:~#tylko co dalej? tu [url]https://dug.net.pl/tekst/288/reczna_konfiguracja_wi_fi/[/url] znalazłem taki poradnik czy mam się do niego zastosować?
Ostatnio edytowany przez r@f@l (2018-01-09 20:13:13)
Offline
#17 2018-01-09 20:14:56
arecki - Użytkownik
- arecki
- Użytkownik
- Skąd: 44 Bronson Lane Hensonville
- Zarejestrowany: 2016-03-03
Re: karta wi-fi usb mt7601u
Masz widoczne dwie sieci. Do której chcesz się łączyć i czy masz jakieś środowisko graficzne?
Offline
#18 2018-01-09 20:18:24
r@f@l - Użytkownik
- r@f@l
- Użytkownik
- Zarejestrowany: 2018-01-09
Re: karta wi-fi usb mt7601u
nie, nie mam środowiska graficznego a chcę się połączyć z OpenWrt
Ostatnio edytowany przez r@f@l (2018-01-09 20:19:09)
Offline
#19 2018-01-09 20:22:23
ilin - Palacz
- ilin
- Palacz
- Skąd: PRLu
- Zarejestrowany: 2006-05-03
Re: karta wi-fi usb mt7601u
Możesz użyć network managera.
Bez xów skonfigurujesz sobie za pomoca
Kod:
nmtui
[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]
Offline
#20 2018-01-09 20:41:48
r@f@l - Użytkownik
- r@f@l
- Użytkownik
- Zarejestrowany: 2018-01-09
Re: karta wi-fi usb mt7601u
dziękuje bardzo za pomoc i pozdrawiam.
Offline
Informacje debugowania
| Time (s) | Query |
|---|---|
| 0.00014 | SET CHARSET latin2 |
| 0.00005 | SET NAMES latin2 |
| 0.00096 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.137.169.56' WHERE u.id=1 |
| 0.00217 | REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '3.137.169.56', 1732447214) |
| 0.00197 | SELECT * FROM punbb_online WHERE logged<1732446914 |
| 0.00053 | SELECT topic_id FROM punbb_posts WHERE id=316723 |
| 0.00087 | SELECT id FROM punbb_posts WHERE topic_id=30184 ORDER BY posted |
| 0.00032 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=30184 AND t.moved_to IS NULL |
| 0.00028 | SELECT search_for, replace_with FROM punbb_censoring |
| 0.00241 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=30184 ORDER BY p.id LIMIT 0,25 |
| 0.00080 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=30184 |
| Total query time: 0.0105 s | |