Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
- Forum Debian Users Gang
- » Instalacja i podstawowa konfiguracja
- » Debian Stretch i problemy z instalacją i po instalacji
#1 2018-02-12 21:15:20
Ainat - 
Użytkownik
- Ainat
- Użytkownik
- Zarejestrowany: 2018-01-05
Debian Stretch i problemy z instalacją i po instalacji
Zainstalowałem pierwszy raz w życiu Debiana. Problemy były od początku z instalacją; płyta cd po zabotowaniu , w jakimś nie określonym
momencie instalacji się pikselowała uniemożliwiając dalszą instalację. Potem padła decyzja o instalqacji z pena ; zrobiłem pena w Rufusie to
z kolei nie mogłem zabotować. Płyta staroć na 939 A8N SLI DELUKSE ASUSA z 2004 roku. Problem z botowaniem rozwiązałem za pomocą PLOP na cd , polecam fajne rozwiązanie.
Po instalacji , kilkukrotnej z powodów opisanych wyżej Debian szybko chodzi (podoba mi się ), środowisko graficzne to MATE.
Jest jednak jeden problem; z niewiadomego powodu i w nieokreślonym czasie zamraża się wszystko.
Obraz jest ok. nie uszkodzony w żadnym stopniu, zamraża się wszystko totalnie , jedynie myszką po ekranie można
latać bez możliwości zrobienia czegokolwiek. Komp jest stary jednak na miejscu Debiana do przedwczoraj bardzo fajnie latało Ubuntu 12.04.
Debian stoi na pierwszej partycji nowego 1 TB dysku Seagate, innego systemu na tym dysku nie ma i nie będzie. Na innych dyskach mam 2 Xpeki z Sp3,
które w miarę dobrze sobie radzą.
Piszę o tym dlatego żeby poinformować ,że raczej na winę sprzętu nic nie wskazuje. Debian dał sobie bez problemu zainstalować Pidgina , Jpk2, gpgsm.
Jest natomiast problem z aptem ; przy próbie instalacji sterowników Nvidi dla czipa NV-44x czyli jeszcze 6600 GT nie mogę nic pobrać ani zrobić.
Polecenie $ nvidia-detect nie wyświetla wyniku i dużo poleceń apta dotyczących systemu nie działa .
Najbardziej zależy mi na znalezieniu rozwiązania problemu z tym zawieszaniem się systemu.
Nie wykluczam osobiście problemu ze sprzętem.
Ostatnio edytowany przez Ainat (2018-02-12 21:44:21)
Offline
#2 2018-02-13 10:26:25
Jacekalex - Podobno człowiek...;)
- Jacekalex
- Podobno człowiek...;)
- Skąd: /dev/urandom
- Zarejestrowany: 2008-01-07
Re: Debian Stretch i problemy z instalacją i po instalacji
Jak się system wiesza, czy "zamraża" to potrzebny jest [b]/var/log/kern.log[/b]
wrzuć na [url=https://pastebin.com/]pastebina[/url] i daj sznurka.
Oczywiście to w przypadku, kiedy wiesza się cały system, i np nie odpowiada na pingi z innego kompa.
Jeżeli wiesza się sam Xorg (i blokuje klawiaturę i myszkę), to przydałby się
Kod:
/var/log/Xorg.0.log
z takiego powieszenia.
Takie logi mogą być w różnych plikach, zobacz
Kod:
ls /var/log/Xorg.*
i uściślij, co to znaczy "nie mogę zainstalować sterownika", bo to trochę dziwne.
Pokaż wykonany z konta root wynik:
Kod:
apt install nvidia-detect nvidia-detect
PS.
Prawidłowy wynik wyjścia nvidia-detect powinien wyglądać podobnie do tego:
Kod:
# Debian ### wto lut 13 10:26:41 domek : /
root ~> nvidia-detect
Detected NVIDIA GPUs:
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GM107 [GeForce GTX 750] [10de:1381] (rev a2)
Checking card: NVIDIA Corporation GM107 [GeForce GTX 750] (rev a2)
Your card is supported by the default drivers and legacy driver series 340.
It is recommended to install the
nvidia-driver
package.Pozdro
Ostatnio edytowany przez Jacekalex (2018-02-13 10:29:42)
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)
Offline
#3 2018-02-14 12:48:11
Ainat - Użytkownik
- Ainat
- Użytkownik
- Zarejestrowany: 2018-01-05
Re: Debian Stretch i problemy z instalacją i po instalacji
kern.log jest tutaj ( na podanej stronie był za duzy) https://drive.google.com/file/d/1XteGzKoTWM9j-PH6ui8NFdVxtumg16DI/view?usp=sharing
Xorg.0.log
Kod:
X.Org X Server 1.19.2
Release Date: 2017-03-02
[ 11.867] X Protocol Version 11, Revision 0
[ 11.867] Build Operating System: Linux 4.9.0-4-amd64 x86_64 Debian
[ 11.867] Current Operating System: Linux Stretch 4.9.0-4-amd64 #1 SMP Debian 4.9.65-3 (2017-12-03) x86_64
[ 11.867] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-4-amd64 root=/dev/sda1 ro quiet
[ 11.867] Build Date: 16 October 2017 08:19:45AM
[ 11.867] xorg-server 2:1.19.2-1+deb9u2 (https://www.debian.org/support)
[ 11.867] Current version of pixman: 0.34.0
[ 11.867] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.867] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11.867] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 14 11:12:49 2018
[ 11.882] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 11.892] (==) No Layout section. Using the first Screen section.
[ 11.892] (==) No screen section available. Using defaults.
[ 11.892] (**) |-->Screen "Default Screen Section" (0)
[ 11.892] (**) | |-->Monitor "<default monitor>"
[ 11.894] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 11.894] (==) Automatically adding devices
[ 11.894] (==) Automatically enabling devices
[ 11.894] (==) Automatically adding GPU devices
[ 11.894] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 11.915] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 11.915] Entry deleted from font path.
[ 11.919] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 11.919] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 11.919] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 11.919] (II) Loader magic: 0x5561fdc6fe00
[ 11.919] (II) Module ABI versions:
[ 11.919] X.Org ANSI C Emulation: 0.4
[ 11.919] X.Org Video Driver: 23.0
[ 11.919] X.Org XInput driver : 24.1
[ 11.919] X.Org Server Extension : 10.0
[ 11.921] (++) using VT number 7
[ 11.921] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 11.922] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 11.925] (--) PCI:*(0:1:0:0) 10de:0140:1458:3125 rev 162, Mem @ 0xc8000000/67108864, 0xc0000000/134217728, 0xcc000000/16777216, BIOS @ 0x????????/131072
[ 11.925] (II) LoadModule: "glx"
[ 11.927] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 11.980] (II) Module glx: vendor="X.Org Foundation"
[ 11.980] compiled for 1.19.2, module version = 1.0.0
[ 11.981] ABI class: X.Org Server Extension, version 10.0
[ 11.981] (==) Matched nouveau as autoconfigured driver 0
[ 11.981] (==) Matched nv as autoconfigured driver 1
[ 11.981] (==) Matched nouveau as autoconfigured driver 2
[ 11.981] (==) Matched nv as autoconfigured driver 3
[ 11.981] (==) Matched modesetting as autoconfigured driver 4
[ 11.981] (==) Matched fbdev as autoconfigured driver 5
[ 11.981] (==) Matched vesa as autoconfigured driver 6
[ 11.981] (==) Assigned the driver to the xf86ConfigLayout
[ 11.981] (II) LoadModule: "nouveau"
[ 11.981] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 11.991] (II) Module nouveau: vendor="X.Org Foundation"
[ 11.991] compiled for 1.19.3, module version = 1.0.13
[ 11.991] Module class: X.Org Video Driver
[ 11.991] ABI class: X.Org Video Driver, version 23.0
[ 11.991] (II) LoadModule: "nv"
[ 11.992] (WW) Warning, couldn't open module nv
[ 11.992] (II) UnloadModule: "nv"
[ 11.992] (II) Unloading nv
[ 11.992] (EE) Failed to load module "nv" (module does not exist, 0)
[ 11.992] (II) LoadModule: "modesetting"
[ 11.992] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 11.994] (II) Module modesetting: vendor="X.Org Foundation"
[ 11.994] compiled for 1.19.2, module version = 1.19.2
[ 11.994] Module class: X.Org Video Driver
[ 11.994] ABI class: X.Org Video Driver, version 23.0
[ 11.994] (II) LoadModule: "fbdev"
[ 11.994] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 11.995] (II) Module fbdev: vendor="X.Org Foundation"
[ 11.995] compiled for 1.19.0, module version = 0.4.4
[ 11.995] Module class: X.Org Video Driver
[ 11.995] ABI class: X.Org Video Driver, version 23.0
[ 11.995] (II) LoadModule: "vesa"
[ 11.995] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 11.996] (II) Module vesa: vendor="X.Org Foundation"
[ 11.996] compiled for 1.19.0, module version = 2.3.4
[ 11.996] Module class: X.Org Video Driver
[ 11.996] ABI class: X.Org Video Driver, version 23.0
[ 11.996] (II) NOUVEAU driver Date: Tue Sep 20 00:31:06 2016 -0400
[ 11.997] (II) NOUVEAU driver for NVIDIA chipset families :
[ 11.997] RIVA TNT (NV04)
[ 11.997] RIVA TNT2 (NV05)
[ 11.997] GeForce 256 (NV10)
[ 11.997] GeForce 2 (NV11, NV15)
[ 11.997] GeForce 4MX (NV17, NV18)
[ 11.997] GeForce 3 (NV20)
[ 11.997] GeForce 4Ti (NV25, NV28)
[ 11.997] GeForce FX (NV3x)
[ 11.997] GeForce 6 (NV4x)
[ 11.997] GeForce 7 (G7x)
[ 11.997] GeForce 8 (G8x)
[ 11.997] GeForce GTX 200 (NVA0)
[ 11.997] GeForce GTX 400 (NVC0)
[ 11.997] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 11.998] (II) FBDEV: driver for framebuffer: fbdev
[ 11.998] (II) VESA: driver for VESA chipsets: vesa
[ 12.000] (II) [drm] nouveau interface version: 1.3.1
[ 12.001] (WW) Falling back to old probe method for modesetting
[ 12.001] (WW) Falling back to old probe method for fbdev
[ 12.001] (II) Loading sub module "fbdevhw"
[ 12.001] (II) LoadModule: "fbdevhw"
[ 12.001] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 12.002] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 12.002] compiled for 1.19.2, module version = 0.0.2
[ 12.002] ABI class: X.Org Video Driver, version 23.0
[ 12.003] (WW) Falling back to old probe method for vesa
[ 12.003] (II) Loading sub module "dri2"
[ 12.003] (II) LoadModule: "dri2"
[ 12.003] (II) Module "dri2" already built-in
[ 12.003] (--) NOUVEAU(0): Chipset: "NVIDIA NV43"
[ 12.003] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 12.003] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 12.003] (==) NOUVEAU(0): RGB weight 888
[ 12.003] (==) NOUVEAU(0): Default visual is TrueColor
[ 12.003] (==) NOUVEAU(0): Using HW cursor
[ 12.003] (==) NOUVEAU(0): Allowed maximum DRI level 2.
[ 12.003] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[ 12.003] (==) NOUVEAU(0): Page flipping enabled
[ 12.003] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[ 12.003] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[ 12.003] (II) NOUVEAU(0): Initializing outputs ...
[ 12.044] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 12.074] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 12.144] (II) NOUVEAU(0): Output TV-1 has no monitor section
[ 12.144] (II) NOUVEAU(0): 3 crtcs needed for screen.
[ 12.144] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[ 12.144] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[ 12.184] (II) NOUVEAU(0): EDID for output VGA-1
[ 12.214] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 12.214] (II) NOUVEAU(0): Manufacturer: SAM Model: 711 Serial#: 858796596
[ 12.214] (II) NOUVEAU(0): Year: 2010 Week: 11
[ 12.214] (II) NOUVEAU(0): EDID Version: 1.3
[ 12.214] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 12.214] (II) NOUVEAU(0): Sync: Separate Composite SyncOnGreen
[ 12.215] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 12.215] (II) NOUVEAU(0): Gamma: 2.20
[ 12.215] (II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
[ 12.215] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 12.215] (II) NOUVEAU(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 12.215] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 12.215] (II) NOUVEAU(0): Supported established timings:
[ 12.215] (II) NOUVEAU(0): 720x400@70Hz
[ 12.215] (II) NOUVEAU(0): 640x480@60Hz
[ 12.215] (II) NOUVEAU(0): 640x480@67Hz
[ 12.215] (II) NOUVEAU(0): 640x480@72Hz
[ 12.215] (II) NOUVEAU(0): 640x480@75Hz
[ 12.215] (II) NOUVEAU(0): 800x600@56Hz
[ 12.215] (II) NOUVEAU(0): 800x600@60Hz
[ 12.215] (II) NOUVEAU(0): 800x600@72Hz
[ 12.215] (II) NOUVEAU(0): 800x600@75Hz
[ 12.215] (II) NOUVEAU(0): 832x624@75Hz
[ 12.215] (II) NOUVEAU(0): 1024x768@60Hz
[ 12.215] (II) NOUVEAU(0): 1024x768@70Hz
[ 12.215] (II) NOUVEAU(0): 1024x768@75Hz
[ 12.215] (II) NOUVEAU(0): 1280x1024@75Hz
[ 12.215] (II) NOUVEAU(0): 1152x864@75Hz
[ 12.215] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 12.215] (II) NOUVEAU(0): Supported standard timings:
[ 12.215] (II) NOUVEAU(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 12.215] (II) NOUVEAU(0): #1: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 12.215] (II) NOUVEAU(0): #2: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 12.215] (II) NOUVEAU(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 12.215] (II) NOUVEAU(0): #4: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 12.215] (II) NOUVEAU(0): #5: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 12.215] (II) NOUVEAU(0): #6: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 12.215] (II) NOUVEAU(0): Supported detailed timing:
[ 12.215] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 531 x 299 mm
[ 12.215] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 12.215] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 12.215] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 12.215] (II) NOUVEAU(0): Monitor name: SMB2430HD
[ 12.216] (II) NOUVEAU(0): Serial No: 0
[ 12.216] (II) NOUVEAU(0): EDID (in hex):
[ 12.216] (II) NOUVEAU(0): 00ffffffffffff004c2d110734323033
[ 12.216] (II) NOUVEAU(0): 0b1401030e351e782aee91a3544c9926
[ 12.216] (II) NOUVEAU(0): 0f5054bfef8081009500b3008140714f
[ 12.216] (II) NOUVEAU(0): 8180950f0101023a801871382d40582c
[ 12.216] (II) NOUVEAU(0): 4500132b2100001e000000fd00384b1e
[ 12.216] (II) NOUVEAU(0): 5111000a202020202020000000fc0053
[ 12.216] (II) NOUVEAU(0): 4d423234333048440a202020000000ff
[ 12.216] (II) NOUVEAU(0): 00300a20202020202020202020200003
[ 12.216] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[ 12.216] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 12.216] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 12.217] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 12.217] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 12.217] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 12.217] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 12.284] (II) NOUVEAU(0): EDID for output TV-1
[ 12.284] (II) NOUVEAU(0): Printing probed modes for output TV-1
[ 12.284] (II) NOUVEAU(0): Modeline "720x576"x50.0 28.66 720 776 856 960 576 576 588 597 -hsync -vsync (29.9 kHz eP)
[ 12.284] (II) NOUVEAU(0): Modeline "1024x768"x50.0 54.16 1024 1064 1200 1344 768 768 777 806 -hsync -vsync (40.3 kHz e)
[ 12.284] (II) NOUVEAU(0): Modeline "800x600"x50.0 32.14 800 840 920 1040 600 600 604 618 +hsync +vsync (30.9 kHz e)
[ 12.284] (II) NOUVEAU(0): Modeline "720x480"x50.0 25.20 720 752 872 960 480 480 493 525 -hsync -vsync (26.2 kHz e)
[ 12.284] (II) NOUVEAU(0): Modeline "640x480"x50.0 23.10 640 672 768 880 480 480 492 525 -hsync -vsync (26.2 kHz e)
[ 12.284] (II) NOUVEAU(0): Modeline "400x300"x100.0 20.10 400 432 496 640 300 300 303 314 doublescan +hsync +vsync (31.4 kHz e)
[ 12.284] (II) NOUVEAU(0): Modeline "320x240"x100.0 14.73 320 344 392 560 240 240 246 263 doublescan -hsync -vsync (26.3 kHz e)
[ 12.284] (II) NOUVEAU(0): Modeline "320x200"x100.0 12.32 320 344 392 560 200 200 202 220 doublescan -hsync -vsync (22.0 kHz e)
[ 12.284] (II) NOUVEAU(0): Output VGA-1 disconnected
[ 12.284] (II) NOUVEAU(0): Output DVI-I-1 connected
[ 12.284] (II) NOUVEAU(0): Output TV-1 connected
[ 12.284] (II) NOUVEAU(0): Using spanning desktop for initial modes
[ 12.284] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080 +0+0
[ 12.284] (II) NOUVEAU(0): Output TV-1 using initial mode 720x576 +1920+0
[ 12.284] (==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 12.284] (--) NOUVEAU(0): Virtual size is 2640x1080 (pitch 0)
[ 12.284] (**) NOUVEAU(0): Driver mode "720x576": 28.7 MHz (scaled from 0.0 MHz), 29.9 kHz, 50.0 Hz
[ 12.284] (II) NOUVEAU(0): Modeline "720x576"x50.0 28.66 720 776 856 960 576 576 588 597 -hsync -vsync (29.9 kHz eP)
[ 12.284] (**) NOUVEAU(0): Driver mode "1024x768": 54.2 MHz (scaled from 0.0 MHz), 40.3 kHz, 50.0 Hz
[ 12.284] (II) NOUVEAU(0): Modeline "1024x768"x50.0 54.16 1024 1064 1200 1344 768 768 777 806 -hsync -vsync (40.3 kHz e)
[ 12.284] (**) NOUVEAU(0): Driver mode "800x600": 32.1 MHz (scaled from 0.0 MHz), 30.9 kHz, 50.0 Hz
[ 12.284] (II) NOUVEAU(0): Modeline "800x600"x50.0 32.14 800 840 920 1040 600 600 604 618 +hsync +vsync (30.9 kHz e)
[ 12.284] (**) NOUVEAU(0): Driver mode "720x480": 25.2 MHz (scaled from 0.0 MHz), 26.2 kHz, 50.0 Hz
[ 12.284] (II) NOUVEAU(0): Modeline "720x480"x50.0 25.20 720 752 872 960 480 480 493 525 -hsync -vsync (26.2 kHz e)
[ 12.284] (**) NOUVEAU(0): Driver mode "640x480": 23.1 MHz (scaled from 0.0 MHz), 26.2 kHz, 50.0 Hz
[ 12.284] (II) NOUVEAU(0): Modeline "640x480"x50.0 23.10 640 672 768 880 480 480 492 525 -hsync -vsync (26.2 kHz e)
[ 12.284] (**) NOUVEAU(0): Driver mode "400x300": 20.1 MHz (scaled from 0.0 MHz), 31.4 kHz, 100.0 Hz (D)
[ 12.284] (II) NOUVEAU(0): Modeline "400x300"x100.0 20.10 400 432 496 640 300 300 303 314 doublescan +hsync +vsync (31.4 kHz e)
[ 12.284] (**) NOUVEAU(0): Driver mode "320x240": 14.7 MHz (scaled from 0.0 MHz), 26.3 kHz, 100.0 Hz (D)
[ 12.284] (II) NOUVEAU(0): Modeline "320x240"x100.0 14.73 320 344 392 560 240 240 246 263 doublescan -hsync -vsync (26.3 kHz e)
[ 12.284] (**) NOUVEAU(0): Driver mode "320x200": 12.3 MHz (scaled from 0.0 MHz), 22.0 kHz, 100.0 Hz (D)
[ 12.284] (II) NOUVEAU(0): Modeline "320x200"x100.0 12.32 320 344 392 560 200 200 202 220 doublescan -hsync -vsync (22.0 kHz e)
[ 12.284] (==) NOUVEAU(0): DPI set to (96, 96)
[ 12.284] (II) Loading sub module "fb"
[ 12.285] (II) LoadModule: "fb"
[ 12.285] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 12.287] (II) Module fb: vendor="X.Org Foundation"
[ 12.287] compiled for 1.19.2, module version = 1.0.0
[ 12.287] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12.287] (II) Loading sub module "shadowfb"
[ 12.287] (II) LoadModule: "shadowfb"
[ 12.287] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 12.288] (II) Module shadowfb: vendor="X.Org Foundation"
[ 12.288] compiled for 1.19.2, module version = 1.0.0
[ 12.288] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12.288] (II) UnloadModule: "modesetting"
[ 12.288] (II) Unloading modesetting
[ 12.288] (II) UnloadModule: "fbdev"
[ 12.288] (II) Unloading fbdev
[ 12.288] (II) UnloadSubModule: "fbdevhw"
[ 12.288] (II) Unloading fbdevhw
[ 12.288] (II) UnloadModule: "vesa"
[ 12.288] (II) Unloading vesa
[ 12.288] (--) Depth 24 pixmap format is 32 bpp
[ 12.290] (II) NOUVEAU(0): Channel setup complete.
[ 12.294] (II) NOUVEAU(0): Hardware support for Present enabled
[ 12.294] (II) NOUVEAU(0): [DRI2] Setup complete
[ 12.294] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 12.294] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 12.294] (II) Loading sub module "exa"
[ 12.294] (II) LoadModule: "exa"
[ 12.294] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 12.296] (II) Module exa: vendor="X.Org Foundation"
[ 12.296] compiled for 1.19.2, module version = 2.6.0
[ 12.296] ABI class: X.Org Video Driver, version 23.0
[ 12.296] (II) EXA(0): Driver allocated offscreen pixmaps
[ 12.296] (II) EXA(0): Driver registered support for the following operations:
[ 12.296] (II) Solid
[ 12.296] (II) Copy
[ 12.296] (II) Composite (RENDER acceleration)
[ 12.296] (II) UploadToScreen
[ 12.296] (II) DownloadFromScreen
[ 12.296] (==) NOUVEAU(0): Backing store enabled
[ 12.296] (==) NOUVEAU(0): Silken mouse enabled
[ 12.296] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
[ 12.296] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 12.296] (==) NOUVEAU(0): DPMS enabled
[ 12.296] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 12.298] (--) RandR disabled
[ 12.306] (II) SELinux: Disabled on system
[ 12.944] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 12.944] (II) AIGLX: enabled GLX_ARB_create_context
[ 12.944] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 12.944] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 12.944] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 12.944] (II) AIGLX: enabled GLX_SGI_swap_control
[ 12.944] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 12.944] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 12.944] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 12.944] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 12.945] (II) AIGLX: Loaded and initialized nouveau
[ 12.945] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 12.948] (II) NOUVEAU(0): NVEnterVT is called.
[ 12.948] (II) NOUVEAU(0): Setting screen physical size to 698 x 285
[ 12.948] resize called 2640 1080
[ 13.298] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 13.298] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 13.298] (II) LoadModule: "libinput"
[ 13.299] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 13.332] (II) Module libinput: vendor="X.Org Foundation"
[ 13.332] compiled for 1.19.0, module version = 0.23.0
[ 13.332] Module class: X.Org XInput Driver
[ 13.332] ABI class: X.Org XInput driver, version 24.1
[ 13.332] (II) Using input driver 'libinput' for 'Power Button'
[ 13.332] (**) Power Button: always reports core events
[ 13.332] (**) Option "Device" "/dev/input/event3"
[ 13.332] (**) Option "_source" "server/udev"
[ 13.333] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 13.333] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 13.360] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 13.360] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 13.360] (**) Option "xkb_model" "pc105"
[ 13.360] (**) Option "xkb_layout" "pl"
[ 13.405] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 13.405] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 13.406] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 13.406] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 13.406] (II) Using input driver 'libinput' for 'Power Button'
[ 13.406] (**) Power Button: always reports core events
[ 13.406] (**) Option "Device" "/dev/input/event2"
[ 13.406] (**) Option "_source" "server/udev"
[ 13.406] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 13.406] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 13.416] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 13.416] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 13.416] (**) Option "xkb_model" "pc105"
[ 13.416] (**) Option "xkb_layout" "pl"
[ 13.417] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 13.417] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 13.417] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event1)
[ 13.417] (**) USB OPTICAL MOUSE : Applying InputClass "libinput pointer catchall"
[ 13.417] (II) Using input driver 'libinput' for 'USB OPTICAL MOUSE '
[ 13.417] (**) USB OPTICAL MOUSE : always reports core events
[ 13.417] (**) Option "Device" "/dev/input/event1"
[ 13.417] (**) Option "_source" "server/udev"
[ 13.476] (II) input device 'USB OPTICAL MOUSE ', /dev/input/event1 is tagged by udev as: Mouse
[ 13.476] (II) input device 'USB OPTICAL MOUSE ', /dev/input/event1 is a pointer caps
[ 13.508] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/0003:275D:0BA6.0001/input/input1/event1"
[ 13.508] (II) XINPUT: Adding extended input device "USB OPTICAL MOUSE " (type: MOUSE, id 8)
[ 13.508] (**) Option "AccelerationScheme" "none"
[ 13.508] (**) USB OPTICAL MOUSE : (accel) selected scheme none/0
[ 13.508] (**) USB OPTICAL MOUSE : (accel) acceleration factor: 2.000
[ 13.508] (**) USB OPTICAL MOUSE : (accel) acceleration threshold: 4
[ 13.568] (II) input device 'USB OPTICAL MOUSE ', /dev/input/event1 is tagged by udev as: Mouse
[ 13.568] (II) input device 'USB OPTICAL MOUSE ', /dev/input/event1 is a pointer caps
[ 13.569] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 13.569] (II) No input driver specified, ignoring this device.
[ 13.569] (II) This device may have been added with another device file.
[ 13.570] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 13.570] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 13.570] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 13.570] (**) AT Translated Set 2 keyboard: always reports core events
[ 13.570] (**) Option "Device" "/dev/input/event0"
[ 13.570] (**) Option "_source" "server/udev"
[ 13.570] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 13.570] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 13.600] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 13.600] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 13.600] (**) Option "xkb_model" "pc105"
[ 13.600] (**) Option "xkb_layout" "pl"
[ 13.601] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 13.601] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 13.602] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 13.602] (II) No input driver specified, ignoring this device.
[ 13.602] (II) This device may have been added with another device file.[ 11.867]Xorg.0.log.old
Kod:
[ 11.867]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[ 11.867] X Protocol Version 11, Revision 0
[ 11.867] Build Operating System: Linux 4.9.0-4-amd64 x86_64 Debian
[ 11.867] Current Operating System: Linux Stretch 4.9.0-4-amd64 #1 SMP Debian 4.9.65-3 (2017-12-03) x86_64
[ 11.867] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-4-amd64 root=/dev/sda1 ro quiet
[ 11.867] Build Date: 16 October 2017 08:19:45AM
[ 11.867] xorg-server 2:1.19.2-1+deb9u2 (https://www.debian.org/support)
[ 11.867] Current version of pixman: 0.34.0
[ 11.867] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 11.867] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11.867] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 14 11:12:49 2018
[ 11.882] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 11.892] (==) No Layout section. Using the first Screen section.
[ 11.892] (==) No screen section available. Using defaults.
[ 11.892] (**) |-->Screen "Default Screen Section" (0)
[ 11.892] (**) | |-->Monitor "<default monitor>"
[ 11.894] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 11.894] (==) Automatically adding devices
[ 11.894] (==) Automatically enabling devices
[ 11.894] (==) Automatically adding GPU devices
[ 11.894] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 11.915] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 11.915] Entry deleted from font path.
[ 11.919] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 11.919] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 11.919] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 11.919] (II) Loader magic: 0x5561fdc6fe00
[ 11.919] (II) Module ABI versions:
[ 11.919] X.Org ANSI C Emulation: 0.4
[ 11.919] X.Org Video Driver: 23.0
[ 11.919] X.Org XInput driver : 24.1
[ 11.919] X.Org Server Extension : 10.0
[ 11.921] (++) using VT number 7
[ 11.921] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 11.922] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 11.925] (--) PCI:*(0:1:0:0) 10de:0140:1458:3125 rev 162, Mem @ 0xc8000000/67108864, 0xc0000000/134217728, 0xcc000000/16777216, BIOS @ 0x????????/131072
[ 11.925] (II) LoadModule: "glx"
[ 11.927] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 11.980] (II) Module glx: vendor="X.Org Foundation"
[ 11.980] compiled for 1.19.2, module version = 1.0.0
[ 11.981] ABI class: X.Org Server Extension, version 10.0
[ 11.981] (==) Matched nouveau as autoconfigured driver 0
[ 11.981] (==) Matched nv as autoconfigured driver 1
[ 11.981] (==) Matched nouveau as autoconfigured driver 2
[ 11.981] (==) Matched nv as autoconfigured driver 3
[ 11.981] (==) Matched modesetting as autoconfigured driver 4
[ 11.981] (==) Matched fbdev as autoconfigured driver 5
[ 11.981] (==) Matched vesa as autoconfigured driver 6
[ 11.981] (==) Assigned the driver to the xf86ConfigLayout
[ 11.981] (II) LoadModule: "nouveau"
[ 11.981] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 11.991] (II) Module nouveau: vendor="X.Org Foundation"
[ 11.991] compiled for 1.19.3, module version = 1.0.13
[ 11.991] Module class: X.Org Video Driver
[ 11.991] ABI class: X.Org Video Driver, version 23.0
[ 11.991] (II) LoadModule: "nv"
[ 11.992] (WW) Warning, couldn't open module nv
[ 11.992] (II) UnloadModule: "nv"
[ 11.992] (II) Unloading nv
[ 11.992] (EE) Failed to load module "nv" (module does not exist, 0)
[ 11.992] (II) LoadModule: "modesetting"
[ 11.992] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 11.994] (II) Module modesetting: vendor="X.Org Foundation"
[ 11.994] compiled for 1.19.2, module version = 1.19.2
[ 11.994] Module class: X.Org Video Driver
[ 11.994] ABI class: X.Org Video Driver, version 23.0
[ 11.994] (II) LoadModule: "fbdev"
[ 11.994] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 11.995] (II) Module fbdev: vendor="X.Org Foundation"
[ 11.995] compiled for 1.19.0, module version = 0.4.4
[ 11.995] Module class: X.Org Video Driver
[ 11.995] ABI class: X.Org Video Driver, version 23.0
[ 11.995] (II) LoadModule: "vesa"
[ 11.995] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 11.996] (II) Module vesa: vendor="X.Org Foundation"
[ 11.996] compiled for 1.19.0, module version = 2.3.4
[ 11.996] Module class: X.Org Video Driver
[ 11.996] ABI class: X.Org Video Driver, version 23.0
[ 11.996] (II) NOUVEAU driver Date: Tue Sep 20 00:31:06 2016 -0400
[ 11.997] (II) NOUVEAU driver for NVIDIA chipset families :
[ 11.997] RIVA TNT (NV04)
[ 11.997] RIVA TNT2 (NV05)
[ 11.997] GeForce 256 (NV10)
[ 11.997] GeForce 2 (NV11, NV15)
[ 11.997] GeForce 4MX (NV17, NV18)
[ 11.997] GeForce 3 (NV20)
[ 11.997] GeForce 4Ti (NV25, NV28)
[ 11.997] GeForce FX (NV3x)
[ 11.997] GeForce 6 (NV4x)
[ 11.997] GeForce 7 (G7x)
[ 11.997] GeForce 8 (G8x)
[ 11.997] GeForce GTX 200 (NVA0)
[ 11.997] GeForce GTX 400 (NVC0)
[ 11.997] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 11.998] (II) FBDEV: driver for framebuffer: fbdev
[ 11.998] (II) VESA: driver for VESA chipsets: vesa
[ 12.000] (II) [drm] nouveau interface version: 1.3.1
[ 12.001] (WW) Falling back to old probe method for modesetting
[ 12.001] (WW) Falling back to old probe method for fbdev
[ 12.001] (II) Loading sub module "fbdevhw"
[ 12.001] (II) LoadModule: "fbdevhw"
[ 12.001] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 12.002] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 12.002] compiled for 1.19.2, module version = 0.0.2
[ 12.002] ABI class: X.Org Video Driver, version 23.0
[ 12.003] (WW) Falling back to old probe method for vesa
[ 12.003] (II) Loading sub module "dri2"
[ 12.003] (II) LoadModule: "dri2"
[ 12.003] (II) Module "dri2" already built-in
[ 12.003] (--) NOUVEAU(0): Chipset: "NVIDIA NV43"
[ 12.003] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 12.003] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 12.003] (==) NOUVEAU(0): RGB weight 888
[ 12.003] (==) NOUVEAU(0): Default visual is TrueColor
[ 12.003] (==) NOUVEAU(0): Using HW cursor
[ 12.003] (==) NOUVEAU(0): Allowed maximum DRI level 2.
[ 12.003] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[ 12.003] (==) NOUVEAU(0): Page flipping enabled
[ 12.003] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[ 12.003] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[ 12.003] (II) NOUVEAU(0): Initializing outputs ...
[ 12.044] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 12.074] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 12.144] (II) NOUVEAU(0): Output TV-1 has no monitor section
[ 12.144] (II) NOUVEAU(0): 3 crtcs needed for screen.
[ 12.144] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[ 12.144] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[ 12.184] (II) NOUVEAU(0): EDID for output VGA-1
[ 12.214] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 12.214] (II) NOUVEAU(0): Manufacturer: SAM Model: 711 Serial#: 858796596
[ 12.214] (II) NOUVEAU(0): Year: 2010 Week: 11
[ 12.214] (II) NOUVEAU(0): EDID Version: 1.3
[ 12.214] (II) NOUVEAU(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 12.214] (II) NOUVEAU(0): Sync: Separate Composite SyncOnGreen
[ 12.215] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 12.215] (II) NOUVEAU(0): Gamma: 2.20
[ 12.215] (II) NOUVEAU(0): DPMS capabilities: Off; RGB/Color Display
[ 12.215] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 12.215] (II) NOUVEAU(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 12.215] (II) NOUVEAU(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 12.215] (II) NOUVEAU(0): Supported established timings:
[ 12.215] (II) NOUVEAU(0): 720x400@70Hz
[ 12.215] (II) NOUVEAU(0): 640x480@60Hz
[ 12.215] (II) NOUVEAU(0): 640x480@67Hz
[ 12.215] (II) NOUVEAU(0): 640x480@72Hz
[ 12.215] (II) NOUVEAU(0): 640x480@75Hz
[ 12.215] (II) NOUVEAU(0): 800x600@56Hz
[ 12.215] (II) NOUVEAU(0): 800x600@60Hz
[ 12.215] (II) NOUVEAU(0): 800x600@72Hz
[ 12.215] (II) NOUVEAU(0): 800x600@75Hz
[ 12.215] (II) NOUVEAU(0): 832x624@75Hz
[ 12.215] (II) NOUVEAU(0): 1024x768@60Hz
[ 12.215] (II) NOUVEAU(0): 1024x768@70Hz
[ 12.215] (II) NOUVEAU(0): 1024x768@75Hz
[ 12.215] (II) NOUVEAU(0): 1280x1024@75Hz
[ 12.215] (II) NOUVEAU(0): 1152x864@75Hz
[ 12.215] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 12.215] (II) NOUVEAU(0): Supported standard timings:
[ 12.215] (II) NOUVEAU(0): #0: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 12.215] (II) NOUVEAU(0): #1: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 12.215] (II) NOUVEAU(0): #2: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 12.215] (II) NOUVEAU(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 12.215] (II) NOUVEAU(0): #4: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 12.215] (II) NOUVEAU(0): #5: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 12.215] (II) NOUVEAU(0): #6: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 12.215] (II) NOUVEAU(0): Supported detailed timing:
[ 12.215] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 531 x 299 mm
[ 12.215] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 12.215] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 12.215] (II) NOUVEAU(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 175 MHz
[ 12.215] (II) NOUVEAU(0): Monitor name: SMB2430HD
[ 12.216] (II) NOUVEAU(0): Serial No: 0
[ 12.216] (II) NOUVEAU(0): EDID (in hex):
[ 12.216] (II) NOUVEAU(0): 00ffffffffffff004c2d110734323033
[ 12.216] (II) NOUVEAU(0): 0b1401030e351e782aee91a3544c9926
[ 12.216] (II) NOUVEAU(0): 0f5054bfef8081009500b3008140714f
[ 12.216] (II) NOUVEAU(0): 8180950f0101023a801871382d40582c
[ 12.216] (II) NOUVEAU(0): 4500132b2100001e000000fd00384b1e
[ 12.216] (II) NOUVEAU(0): 5111000a202020202020000000fc0053
[ 12.216] (II) NOUVEAU(0): 4d423234333048440a202020000000ff
[ 12.216] (II) NOUVEAU(0): 00300a20202020202020202020200003
[ 12.216] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[ 12.216] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 12.216] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 12.216] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 12.217] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 12.217] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 12.217] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 12.217] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 12.284] (II) NOUVEAU(0): EDID for output TV-1
[ 12.284] (II) NOUVEAU(0): Printing probed modes for output TV-1
[ 12.284] (II) NOUVEAU(0): Modeline "720x576"x50.0 28.66 720 776 856 960 576 576 588 597 -hsync -vsync (29.9 kHz eP)
[ 12.284] (II) NOUVEAU(0): Modeline "1024x768"x50.0 54.16 1024 1064 1200 1344 768 768 777 806 -hsync -vsync (40.3 kHz e)
[ 12.284] (II) NOUVEAU(0): Modeline "800x600"x50.0 32.14 800 840 920 1040 600 600 604 618 +hsync +vsync (30.9 kHz e)
[ 12.284] (II) NOUVEAU(0): Modeline "720x480"x50.0 25.20 720 752 872 960 480 480 493 525 -hsync -vsync (26.2 kHz e)
[ 12.284] (II) NOUVEAU(0): Modeline "640x480"x50.0 23.10 640 672 768 880 480 480 492 525 -hsync -vsync (26.2 kHz e)
[ 12.284] (II) NOUVEAU(0): Modeline "400x300"x100.0 20.10 400 432 496 640 300 300 303 314 doublescan +hsync +vsync (31.4 kHz e)
[ 12.284] (II) NOUVEAU(0): Modeline "320x240"x100.0 14.73 320 344 392 560 240 240 246 263 doublescan -hsync -vsync (26.3 kHz e)
[ 12.284] (II) NOUVEAU(0): Modeline "320x200"x100.0 12.32 320 344 392 560 200 200 202 220 doublescan -hsync -vsync (22.0 kHz e)
[ 12.284] (II) NOUVEAU(0): Output VGA-1 disconnected
[ 12.284] (II) NOUVEAU(0): Output DVI-I-1 connected
[ 12.284] (II) NOUVEAU(0): Output TV-1 connected
[ 12.284] (II) NOUVEAU(0): Using spanning desktop for initial modes
[ 12.284] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080 +0+0
[ 12.284] (II) NOUVEAU(0): Output TV-1 using initial mode 720x576 +1920+0
[ 12.284] (==) NOUVEAU(0): Using gamma correction (1.0, 1.0, 1.0)
[ 12.284] (--) NOUVEAU(0): Virtual size is 2640x1080 (pitch 0)
[ 12.284] (**) NOUVEAU(0): Driver mode "720x576": 28.7 MHz (scaled from 0.0 MHz), 29.9 kHz, 50.0 Hz
[ 12.284] (II) NOUVEAU(0): Modeline "720x576"x50.0 28.66 720 776 856 960 576 576 588 597 -hsync -vsync (29.9 kHz eP)
[ 12.284] (**) NOUVEAU(0): Driver mode "1024x768": 54.2 MHz (scaled from 0.0 MHz), 40.3 kHz, 50.0 Hz
[ 12.284] (II) NOUVEAU(0): Modeline "1024x768"x50.0 54.16 1024 1064 1200 1344 768 768 777 806 -hsync -vsync (40.3 kHz e)
[ 12.284] (**) NOUVEAU(0): Driver mode "800x600": 32.1 MHz (scaled from 0.0 MHz), 30.9 kHz, 50.0 Hz
[ 12.284] (II) NOUVEAU(0): Modeline "800x600"x50.0 32.14 800 840 920 1040 600 600 604 618 +hsync +vsync (30.9 kHz e)
[ 12.284] (**) NOUVEAU(0): Driver mode "720x480": 25.2 MHz (scaled from 0.0 MHz), 26.2 kHz, 50.0 Hz
[ 12.284] (II) NOUVEAU(0): Modeline "720x480"x50.0 25.20 720 752 872 960 480 480 493 525 -hsync -vsync (26.2 kHz e)
[ 12.284] (**) NOUVEAU(0): Driver mode "640x480": 23.1 MHz (scaled from 0.0 MHz), 26.2 kHz, 50.0 Hz
[ 12.284] (II) NOUVEAU(0): Modeline "640x480"x50.0 23.10 640 672 768 880 480 480 492 525 -hsync -vsync (26.2 kHz e)
[ 12.284] (**) NOUVEAU(0): Driver mode "400x300": 20.1 MHz (scaled from 0.0 MHz), 31.4 kHz, 100.0 Hz (D)
[ 12.284] (II) NOUVEAU(0): Modeline "400x300"x100.0 20.10 400 432 496 640 300 300 303 314 doublescan +hsync +vsync (31.4 kHz e)
[ 12.284] (**) NOUVEAU(0): Driver mode "320x240": 14.7 MHz (scaled from 0.0 MHz), 26.3 kHz, 100.0 Hz (D)
[ 12.284] (II) NOUVEAU(0): Modeline "320x240"x100.0 14.73 320 344 392 560 240 240 246 263 doublescan -hsync -vsync (26.3 kHz e)
[ 12.284] (**) NOUVEAU(0): Driver mode "320x200": 12.3 MHz (scaled from 0.0 MHz), 22.0 kHz, 100.0 Hz (D)
[ 12.284] (II) NOUVEAU(0): Modeline "320x200"x100.0 12.32 320 344 392 560 200 200 202 220 doublescan -hsync -vsync (22.0 kHz e)
[ 12.284] (==) NOUVEAU(0): DPI set to (96, 96)
[ 12.284] (II) Loading sub module "fb"
[ 12.285] (II) LoadModule: "fb"
[ 12.285] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 12.287] (II) Module fb: vendor="X.Org Foundation"
[ 12.287] compiled for 1.19.2, module version = 1.0.0
[ 12.287] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12.287] (II) Loading sub module "shadowfb"
[ 12.287] (II) LoadModule: "shadowfb"
[ 12.287] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 12.288] (II) Module shadowfb: vendor="X.Org Foundation"
[ 12.288] compiled for 1.19.2, module version = 1.0.0
[ 12.288] ABI class: X.Org ANSI C Emulation, version 0.4
[ 12.288] (II) UnloadModule: "modesetting"
[ 12.288] (II) Unloading modesetting
[ 12.288] (II) UnloadModule: "fbdev"
[ 12.288] (II) Unloading fbdev
[ 12.288] (II) UnloadSubModule: "fbdevhw"
[ 12.288] (II) Unloading fbdevhw
[ 12.288] (II) UnloadModule: "vesa"
[ 12.288] (II) Unloading vesa
[ 12.288] (--) Depth 24 pixmap format is 32 bpp
[ 12.290] (II) NOUVEAU(0): Channel setup complete.
[ 12.294] (II) NOUVEAU(0): Hardware support for Present enabled
[ 12.294] (II) NOUVEAU(0): [DRI2] Setup complete
[ 12.294] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 12.294] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 12.294] (II) Loading sub module "exa"
[ 12.294] (II) LoadModule: "exa"
[ 12.294] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 12.296] (II) Module exa: vendor="X.Org Foundation"
[ 12.296] compiled for 1.19.2, module version = 2.6.0
[ 12.296] ABI class: X.Org Video Driver, version 23.0
[ 12.296] (II) EXA(0): Driver allocated offscreen pixmaps
[ 12.296] (II) EXA(0): Driver registered support for the following operations:
[ 12.296] (II) Solid
[ 12.296] (II) Copy
[ 12.296] (II) Composite (RENDER acceleration)
[ 12.296] (II) UploadToScreen
[ 12.296] (II) DownloadFromScreen
[ 12.296] (==) NOUVEAU(0): Backing store enabled
[ 12.296] (==) NOUVEAU(0): Silken mouse enabled
[ 12.296] (II) NOUVEAU(0): [XvMC] Associated with NV40 texture adapter.
[ 12.296] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 12.296] (==) NOUVEAU(0): DPMS enabled
[ 12.296] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 12.298] (--) RandR disabled
[ 12.306] (II) SELinux: Disabled on system
[ 12.944] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 12.944] (II) AIGLX: enabled GLX_ARB_create_context
[ 12.944] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 12.944] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 12.944] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 12.944] (II) AIGLX: enabled GLX_SGI_swap_control
[ 12.944] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 12.944] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 12.944] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 12.944] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 12.945] (II) AIGLX: Loaded and initialized nouveau
[ 12.945] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 12.948] (II) NOUVEAU(0): NVEnterVT is called.
[ 12.948] (II) NOUVEAU(0): Setting screen physical size to 698 x 285
[ 12.948] resize called 2640 1080
[ 13.298] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 13.298] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 13.298] (II) LoadModule: "libinput"
[ 13.299] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 13.332] (II) Module libinput: vendor="X.Org Foundation"
[ 13.332] compiled for 1.19.0, module version = 0.23.0
[ 13.332] Module class: X.Org XInput Driver
[ 13.332] ABI class: X.Org XInput driver, version 24.1
[ 13.332] (II) Using input driver 'libinput' for 'Power Button'
[ 13.332] (**) Power Button: always reports core events
[ 13.332] (**) Option "Device" "/dev/input/event3"
[ 13.332] (**) Option "_source" "server/udev"
[ 13.333] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 13.333] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 13.360] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 13.360] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 13.360] (**) Option "xkb_model" "pc105"
[ 13.360] (**) Option "xkb_layout" "pl"
[ 13.405] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 13.405] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 13.406] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 13.406] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 13.406] (II) Using input driver 'libinput' for 'Power Button'
[ 13.406] (**) Power Button: always reports core events
[ 13.406] (**) Option "Device" "/dev/input/event2"
[ 13.406] (**) Option "_source" "server/udev"
[ 13.406] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 13.406] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 13.416] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event2"
[ 13.416] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 13.416] (**) Option "xkb_model" "pc105"
[ 13.416] (**) Option "xkb_layout" "pl"
[ 13.417] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 13.417] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[ 13.417] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event1)
[ 13.417] (**) USB OPTICAL MOUSE : Applying InputClass "libinput pointer catchall"
[ 13.417] (II) Using input driver 'libinput' for 'USB OPTICAL MOUSE '
[ 13.417] (**) USB OPTICAL MOUSE : always reports core events
[ 13.417] (**) Option "Device" "/dev/input/event1"
[ 13.417] (**) Option "_source" "server/udev"
[ 13.476] (II) input device 'USB OPTICAL MOUSE ', /dev/input/event1 is tagged by udev as: Mouse
[ 13.476] (II) input device 'USB OPTICAL MOUSE ', /dev/input/event1 is a pointer caps
[ 13.508] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/0003:275D:0BA6.0001/input/input1/event1"
[ 13.508] (II) XINPUT: Adding extended input device "USB OPTICAL MOUSE " (type: MOUSE, id 8)
[ 13.508] (**) Option "AccelerationScheme" "none"
[ 13.508] (**) USB OPTICAL MOUSE : (accel) selected scheme none/0
[ 13.508] (**) USB OPTICAL MOUSE : (accel) acceleration factor: 2.000
[ 13.508] (**) USB OPTICAL MOUSE : (accel) acceleration threshold: 4
[ 13.568] (II) input device 'USB OPTICAL MOUSE ', /dev/input/event1 is tagged by udev as: Mouse
[ 13.568] (II) input device 'USB OPTICAL MOUSE ', /dev/input/event1 is a pointer caps
[ 13.569] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 13.569] (II) No input driver specified, ignoring this device.
[ 13.569] (II) This device may have been added with another device file.
[ 13.570] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 13.570] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 13.570] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 13.570] (**) AT Translated Set 2 keyboard: always reports core events
[ 13.570] (**) Option "Device" "/dev/input/event0"
[ 13.570] (**) Option "_source" "server/udev"
[ 13.570] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 13.570] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 13.600] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 13.600] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[ 13.600] (**) Option "xkb_model" "pc105"
[ 13.600] (**) Option "xkb_layout" "pl"
[ 13.601] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 13.601] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 13.602] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 13.602] (II) No input driver specified, ignoring this device.
[ 13.602] (II) This device may have been added with another device file.nvidia-detect
Kod:
Detected NVIDIA GPUs:
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV43 [GeForce 6600 GT] [10de:0140] (rev a2)
Checking card: NVIDIA Corporation NV43 [GeForce 6600 GT] (rev a2)
Your card is only supported up to the 304 legacy drivers series.
It is recommended to install the
nvidia-legacy-304xx-driver
package.Wiem, że muszę zainstalować sterowniki wersję 304, na forum jest stara instrukcja dla instalacji https://dug.net.pl/tekst/141/instalacja_sterownikow_do_kart_nvidia_w_debianie/
Czy dla Stretcha jest do zastosowania?
To zamrazanie systemu jest totalnie losowe; może być natychmiast po zalogowaniu a może i po kilku godzinach, jednak zawsze w końcu się zamrozi.
Mam za sobą przez te kiolka dni od instalacji pierdylion restartów.
Po zatym co wyżej , jeszcze jeden problem się ujawnił;
instalowałem z odpiętymi pozostałymi dyskami, po podpięciu dwóch (razem 3 na komputerze debian startuje w miarę normalnie, po podpięciu 4 przy botowaniu chce z tego 4 botować i wyświetla błąd , że plików nie znalazł. Myslałem, że to coś z tym 4 dyskiem związane ale jednak nie. Mieszałem tasmami i co do dysku to jest losowe, obojętnie który dysk będzie 4 to wywala błąd botowania i co ciekawe jak w konsoli (to chyba jest konsola gruba- nie jestem pewien tego) , w każdym razie po przejściu do katalogu root wyświetla pliki 1 partycji tego 4 dysku w zależności od tego , który dysk zostanie podpięty jako 4. Dziwne to dla mnie i nie do ogarnięcia, tym bardziej że z debianem mam doczynienia po raz pierwszy. W katalogu root mam pulpit, obrazy,wideo,pobrane,publiczny,dokumenty,muzyka,szablony, czy tak ma być? Mam osobną partycję home i swapa w systemie plików.
Komputer i Bios wykluczam , ponieważ 2 XPeki w komputerze nie mają z botowaniem i dyskami .żadnego problemu, usunięty przed instalacją dokładnie w tym samym miejscy na tym samym dysku Ubuntu 12.04 też najmniejszego problemu nie miał. Więc pozostaje na placu boju Stretch.
Jak z tymi problemami szybko się nie uporam to mimo , że mi się bardzo podoba poleci w kosmos i wróci Ubuntu.
Ostatnio edytowany przez Ainat (2018-02-14 13:00:12)
Offline
#4 2018-02-14 12:50:58
Jacekalex - Podobno człowiek...;)
- Jacekalex
- Podobno człowiek...;)
- Skąd: /dev/urandom
- Zarejestrowany: 2008-01-07
Re: Debian Stretch i problemy z instalacją i po instalacji
PO pierwsze, logi się umieszcza w znacznikach CODE.
Po drugie, masz problem ze sterownikiem NOUVEAU, co widać w logu Xorga.
Spróbuj na sterowniku Nvidii.
W wyniku
Kod:
nvidia-detect
masz napisane czarno na białym:
[b]nvidia-legacy-304xx-driver[/b]
Więc zacznij od instalacji tego sterownika.
Czyli:
Kod:
apt install nvidia-legacy-304xx-driver nvidia-xconfig
Po zainstalowaniu sterownika musisz zrestartować komputer.
I nie strasz tu Ubuntu, bo w Ubuntu ze sterownikami jest sytuacja identyczna, jak w Debianie.
A tu największy problem jest miedzy krzesłem a klawiaturą.
Pozdro
Ostatnio edytowany przez Jacekalex (2018-02-14 13:02:40)
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)
Offline
#5 2018-02-14 13:04:51
Ainat - Użytkownik
- Ainat
- Użytkownik
- Zarejestrowany: 2018-01-05
Re: Debian Stretch i problemy z instalacją i po instalacji
nikogo niczym nie straszę.
Z Ubuntu a miałem ich kiedyś kilka nigdy, pomijając pierwsze wydania takich problemów nie było.
Po prostu nie mam już czasu na eksperymenty, muszę mieć w tym miejscu system do pracy a nie zabawy
Jedynie o to chodzi.
Jak rozwiązać ten cyrk z dyskami, potrzebne mi są wszystkie 4?
Ostatnio edytowany przez Ainat (2018-02-14 13:11:20)
Offline
#6 2018-02-14 13:27:58
Jacekalex - Podobno człowiek...;)
- Jacekalex
- Podobno człowiek...;)
- Skąd: /dev/urandom
- Zarejestrowany: 2008-01-07
Re: Debian Stretch i problemy z instalacją i po instalacji
Jakimi znowu dyskami?
Weź i zainstaluj sterownik do tej karty graficznej, to podstawa.
Potem odpal w konsoli roota polecenie:
Kod:
nvidia-xconfig
- żeby wygenerować konfigurację Xserwera, i po restarcie sterownik powinien działać.
Dysk pod Debiana wystarczy jeden, dobrze jest tylko podzielić system na kilka partycji, np partycje root, home i swap, można też zrobić osobną na /var/log.
Z resztą, jeżeli Ci tak pasuje Ubuntu, to możesz instalować Ubuntu, ale w Ubu ze sterownikami będą takie same jazdy, bo tam są identyczne sterowniki, jak w Debianie.
Ostatnio edytowany przez Jacekalex (2018-02-14 13:29:57)
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)
Offline
#7 2018-02-14 13:57:26
Ainat - Użytkownik
- Ainat
- Użytkownik
- Zarejestrowany: 2018-01-05
Re: Debian Stretch i problemy z instalacją i po instalacji
szukam źródeł dla sterownika 304 żeby dopisać do sources.list
polecenie :apt install nvidia-legacy-304xx-driver nvidia-xconfig
zwraca
E: Nie udało się odnaleźć pakietu nvidia-xconfig
a z dyskami to chyba źle zrozumiałeś; Debian jest na jednym dysku ale ja mam jeszcze inne 3 dyski i one muszą być obsługiwane przez Debiana a na razie nie ma opcji żeby zabotował z podpiętymi 4 dyskami. Opisałem to w poprzednim poście. Problemem jest to, że jak są podpięte wszystkie 4 dyski to Debian chce botować z całkiem innego dysku i się wywala, naczy nie może zabotować bo na tym dysku w ogóle niema jego plików.
Jest tak ,że jeżeli są podpięte 3 dyski to normalnie startuje ze swojego dysku i a jak podepnę czwarty to chce startować z pierwszej partycji całkiem innego dysku i krzyczy że plików nie ma.
Ostatnio edytowany przez Ainat (2018-02-14 14:07:43)
Offline
#8 2018-02-14 14:18:34
zyga64 - Użytkownik
- zyga64
- Użytkownik
- Zarejestrowany: 2017-02-17
Re: Debian Stretch i problemy z instalacją i po instalacji
Jeśli chodzi o sterowniki Nvidii w Debian Stretch to ja instalowałem wg. tej instrukcji: [url]https://dug.net.pl/tekst/142/nvidia___zamkniete_sterowniki_w_debianie/[/url],
a dokładnie wg. poniższej linijki :)
Kod:
aptitude -R install nvidia-legacy-304xx-kernel-dkms nvidia-legacy-304xx-driver nvidia-settings-legacy-304xx
Mam Quadro FX570M (ThinkPad T61p). Instalowałem jak Stretch był testing (w styczniu ubiegłego roku), od tej pory 0 problemów.
Offline
#9 2018-02-14 14:38:37
skullman - Użytkownik
- skullman
- Użytkownik
- Zarejestrowany: 2010-04-08
Re: Debian Stretch i problemy z instalacją i po instalacji
Na jakim interfejsie masz te dyski?
Offline
#10 2018-02-14 16:11:52
Ainat - Użytkownik
- Ainat
- Użytkownik
- Zarejestrowany: 2018-01-05
Re: Debian Stretch i problemy z instalacją i po instalacji
sata2
Offline
#11 2018-02-14 16:43:04
Jacekalex - Podobno człowiek...;)
- Jacekalex
- Podobno człowiek...;)
- Skąd: /dev/urandom
- Zarejestrowany: 2008-01-07
Re: Debian Stretch i problemy z instalacją i po instalacji
szukam źródeł dla sterownika 304 żeby dopisać do sources.list
polecenie :apt install nvidia-legacy-304xx-driver nvidia-xconfig
zwraca
E: Nie udało się odnaleźć pakietu nvidia-xconfig[/quote]
Hmm:Kod:
apt-cache policy nvidia-xconfig nvidia-xconfig: Zainstalowana: (brak) Kandydująca: 384.111-1 Tabela wersji: 384.111-1 990 990 https://deb.debian.org/debian testing/contrib amd64 Packages 500 https://deb.debian.org/debian unstable/contrib amd64 Packages 384.111-1~bpo9+1 100 100 https://deb.debian.org/debian stretch-backports/contrib amd64 Packages 375.26-1 500 500 https://deb.debian.org/debian stable/contrib amd64 PackagesKod:
apt-cache policy nvidia-legacy-304xx-driver nvidia-legacy-304xx-driver: Zainstalowana: (brak) Kandydująca: 304.137-5 Tabela wersji: 304.137-5 990 990 https://deb.debian.org/debian testing/non-free amd64 Packages 500 https://deb.debian.org/debian unstable/non-free amd64 Packages 304.137-3~bpo9+1 100 100 https://deb.debian.org/debian stretch-backports/non-free amd64 Packages 304.135-2 500 500 https://deb.debian.org/debian stable/non-free amd64 PackagesJak widać, u Ciebie trzeba repozytoria poprawić.
Stabilne repo z mojego sources.list?Kod:
## Strech deb https://deb.debian.org/debian/ stable main contrib non-free deb-src https://deb.debian.org/debian/ stable main contrib non-free ## uaktualnienia bezpieczeństwa deb https://deb.debian.org/debian-security stable/updates main deb-src https://deb.debian.org/debian-security stable/updates main ## często uaktualniane pakiety, np. dotyczące deb https://deb.debian.org/debian stable-updates main contrib non-free deb-src https://deb.debian.org/debian stable-updates main contrib non-free #Backporty: deb https://deb.debian.org/debian stretch-backports main contrib non-free ## przeglądarka Opera deb http://deb.opera.com/opera/ stable non-free ## przeglądarka Google Chrome deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable mainOstatnio edytowany przez Jacekalex (2018-02-14 16:48:11)
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)
Offline
#12 2018-02-14 17:03:29
Ainat - Użytkownik
- Ainat
- Użytkownik
- Zarejestrowany: 2018-01-05
Re: Debian Stretch i problemy z instalacją i po instalacji
dodałem do source.list deb http://ftp.pl.debian.org/debian/ jessie main contrib non-free i apt update
potem jassie zmieniłem na Stretch i wykonałem apt update
polecenie aptitude -R install nvidia-legacy-304xx-kernel-dkms nvidia-legacy-304xx-driver nvidia-settings-legacy-304xx
zwraca basch: aptitude: nie znaleziono polecenia. apt install to samo.
Mój plik sources list na tą chwilę wygląda tak:
Kod:
# # deb cdrom:[Official Debian GNU/Linux Live 9.3.0 mate 2017-12-09T13:26]/ stretch main #deb cdrom:[Official Debian GNU/Linux Live 9.3.0 mate 2017-12-09T13:26]/ stretch main deb http://deb.debian.org/debian/ stretch main deb-src http://deb.debian.org/debian/ stretch main deb http://ftp.pl.debian.org/debian/ stretch main contrib non-free deb http://security.debian.org/debian-security stretch/updates main deb-src http://security.debian.org/debian-security stretch/updates main # stretch-updates, previously known as 'volatile' deb http://deb.debian.org/debian/ stretch-updates main deb-src http://deb.debian.org/debian/ stretch-updates main deb http://ftp.de.debian.org/debian stretch main non-free #deb http://ftp.pl.debian.org/debian/ testing main contrib non-free deb http://ftp.pl.debian.org/debian/ stretch main contrib non-free
Ostatnio edytowany przez Ainat (2018-02-14 17:06:09)
Offline
#13 2018-02-14 17:10:49
Jacekalex - Podobno człowiek...;)
- Jacekalex
- Podobno człowiek...;)
- Skąd: /dev/urandom
- Zarejestrowany: 2008-01-07
Re: Debian Stretch i problemy z instalacją i po instalacji
Spróbuj na tych moich repo, co podałem wyżej.
Ostatnio edytowany przez Jacekalex (2018-02-14 17:11:07)
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)
Offline
#14 2018-02-14 17:21:09
Ainat - Użytkownik
- Ainat
- Użytkownik
- Zarejestrowany: 2018-01-05
Re: Debian Stretch i problemy z instalacją i po instalacji
zamieniłem wpisy w sources list i po apt update jakichś znowu kluczy chce:
Kod:
Następujące podpisy nie mogły zostać zweryfikowane z powodu braku klucza publicznego: NO_PUBKEY D615560BA5C7FF72
Ostatnio edytowany przez Ainat (2018-02-14 18:25:05)
Offline
#15 2018-02-14 17:32:49
Jacekalex - Podobno człowiek...;)
- Jacekalex
- Podobno człowiek...;)
- Skąd: /dev/urandom
- Zarejestrowany: 2008-01-07
Re: Debian Stretch i problemy z instalacją i po instalacji
[quote=Ainat]zamieniłem wpisy w sources list i po apt update jakichś znowu kluczy chce:
Następujące podpisy nie mogły zostać zweryfikowane z powodu braku klucza publicznego: NO_PUBKEY D615560BA5C7FF72[/quote]
Ja to załatwiam tak:
Kod:
#!/bin/sh
if [ `id -u` -ne 0 ]; then
echo "Tylko root może dodać klucze"
exit 1
fi
echo -n "Aktualizacja listy pakietów (może trochę potrwać)... " && \
apt-get update >/dev/null 2>/tmp/apt-get-update-errors && echo "OK"
if ! grep -q NO_PUBKEY /tmp/apt-get-update-errors; then
echo "Wszystkie klucze są dodane, nie ma nic do roboty."
rm -f /tmp/apt-get-update-errors
exit 0
fi
for KEY in `awk '/NO_PUBKEY/ {print $NF}' /tmp/apt-get-update-errors`; do
echo "Przetwarzanie klucza $KEY:"
echo -n " -> pobieranie klucza z serwera... " && \
gpg --keyserver pgp.mit.edu --recv-keys "$KEY" >/dev/null 2>&1 && \
echo "OK" && echo -n " -> dodawanie klucza do bazy... " && \
gpg --armor --export "$KEY" | apt-key add -
done
rm -f /tmp/apt-get-update-errorsSkrypcio sobie siedzie w systemie pod nazwą:
Kod:
/usr/local/sbin/klucze
i ma uprawnienia 755
Kod:
chmod 755 /usr/local/sbin/klucze
wywołanie, jak nie ma jakiegoś klucza?
z konsoli roota
Kod:
klucze
Pozdro
Ostatnio edytowany przez Jacekalex (2018-02-14 18:09:21)
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)
Offline
#16 2018-02-14 18:02:16
Ainat - Użytkownik
- Ainat
- Użytkownik
- Zarejestrowany: 2018-01-05
Re: Debian Stretch i problemy z instalacją i po instalacji
Kod:
.apt-get install apt-transport-https
Kod:
apt-get update
Kod:
aptitude -R install nvidia-legacy-304xx-kernel-dkms nvidia-legacy-304xx-driver nvidia-settings-legacy-304xx
bash: aptitude: nie znaleziono polecenia
Ostatnio edytowany przez Ainat (2018-02-14 18:38:39)
Offline
#17 2018-02-14 18:29:44
skullman - Użytkownik
- skullman
- Użytkownik
- Zarejestrowany: 2010-04-08
Re: Debian Stretch i problemy z instalacją i po instalacji
To zobacz, pod którym repo się pluje o klucze i albo zainstaluj albo wyhaszuj tymczasowo repo jeśli nie jest teraz istotne. Możesz sprawdzić, jakie pakiety z kluczami są dostępne:
Kod:
apt search keyring
Jak się objawia to, że system nie startuje?
Offline
#18 2018-02-14 18:40:57
Ainat - Użytkownik
- Ainat
- Użytkownik
- Zarejestrowany: 2018-01-05
Re: Debian Stretch i problemy z instalacją i po instalacji
klucze zrobiłem w/g przepisu
Kod:
apt-clone/stable,stable 0.4.1 all Script to create state bundles debian-archive-keyring/stable,stable,now 2017.5 all [installed] Archiwum kluczy GnuPG dla archiwów Debiana debian-keyring/stable,stable 2017.05.28 all GnuPG keys of Debian Developers and Maintainers debian-ports-archive-keyring/stable,stable 2016.11.28 all GnuPG archive keys of the debian-ports archive devscripts/stable,stable 2.17.6+deb9u1 amd64 scripts to make the life of a Debian Package maintainer easier emdebian-archive-keyring/stable,stable 2.2 all GnuPG archive keys for the emdebian repository gambas3-gb-desktop-gnome-keyring/stable,stable 3.9.1-3 amd64 Gambas desktop GNOME component gir1.2-gnomekeyring-1.0/stable,stable 3.12.0-1+b2 amd64 GNOME keyring services library - introspection data gnome-keyring/stable,stable,now 3.20.0-3 amd64 [installed,automatic] Obsługa bazy kluczy GNOME (demon i narzędzia) gpgv-static/stable,stable 2.1.18-8~deb9u1 amd64 minimal signature verification tool (static build) jetring/stable,stable 0.25 all gpg keyring maintenance using changesets jpilot-plugins/stable,stable 1.8.2-1+b2 amd64 Wtyczki do jpilot (środowisko palmtopa) keyringer/stable,stable 0.5.0-2 all Distributed secret management using GnuPG and Git kuvert/stable,stable 2.0.13+b1 amd64 wrapper that encrypts or signs outgoing mail lbdb/stable,stable 0.42.1 amd64 Little Brother's DataBase for the mutt mail reader leap-archive-keyring/stable,stable 2016.03.08 all OpenPGP archive key for the leap.se software repositories libgnome-keyring-common/stable,stable,now 3.12.0-1 all [installed,automatic] GNOME keyring services library - data files libgnome-keyring-dev/stable,stable 3.12.0-1+b2 amd64 Pliki deweloperskie do usługi zarządzania kluczami GNOME libgnome-keyring0/stable,stable,now 3.12.0-1+b2 amd64 [installed,automatic] Biblioteka usług zarządzania kluczami GNOME libgnome-keyring0-dbg/stable,stable 3.12.0-1+b2 amd64 Biblioteka usług zarządzania kluczami GNOME (symbole debugowania) libgnome-keyring1.0-cil/stable,stable 1.0.0-5 amd64 CLI library to access the GNOME Keyring daemon libgnome-keyring1.0-cil-dev/stable,stable 1.0.0-5 amd64 CLI library to access the GNOME Keyring daemon libpam-gnome-keyring/stable,stable,now 3.20.0-3 amd64 [installed,automatic] Moduł PAM do odblokowania kluczy GNOME przy użyciu loginu libpam-ssh-agent-auth/stable,stable 0.10.2-2 amd64 PAM Authentication via forwarded ssh-agent libqt5keychain1/stable,stable 0.7.0-3 amd64 Qt API to store passwords (QT5 version) libqtkeychain1/stable,stable 0.7.0-3 amd64 Qt API to store passwords libzulucrypt-plugins/stable,stable 5.0.2-2 amd64 collection of plugins for zulucrypt luksipc/stable,stable 0.04-2+b1 amd64 LUKS in-place conversion tool mercurial-extension-utils/stable,stable 1.3.1-1 all Contains functions for writing Mercurial extensions. mercurial-keyring/stable,stable 1.1.7-1 all Mercurial Keyring Extension monodoc-gnome-keyring-manual/stable,stable 1.0.0-5 all CLI library to access the GNOME Keyring daemon - manual mpop-gnome/stable,stable 1.2.6-1 amd64 POP3 mail retriever - with GNOME keyring support msmtp-gnome/stable,stable 1.6.6-1 amd64 light SMTP client with support for server profiles - with GNOME keyring support network-manager-gnome/stable,stable,now 1.4.4-1 amd64 [installed,automatic] Szkielet zarządzania siecią (nakładka do GNOME) neurodebian-archive-keyring/stable,stable 0.37.6 all neuroscience-oriented distribution - GnuPG archive keys nss-passwords/stable,stable 0.2-2+b1 amd64 read passwords from a Mozilla keyring parcimonie/stable,stable 0.10.2-4 all privacy-friendly helper to refresh a GnuPG keyring pidgin-gnome-keyring/stable,stable 2.0-1 amd64 integrates pidgin (and libpurple) with the system keyring pidgin-gnome-keyring-dbg/stable,stable 2.0-1 amd64 debugging symbols for pidgin-gnome-keyring pius/stable,stable 2.2.3-1 all Tools to help before and after key-signing parties pkg-mozilla-archive-keyring/stable,stable 1.1 all GnuPG archive keys for the Debian Mozilla team package repository python-gnomekeyring/stable,stable 2.32.0+dfsg-3 amd64 Wiązania Pythona dla biblioteki GNOME keyring python-gpg/stable,stable 1.8.0-3+b2 amd64 Python interface to the GPGME GnuPG encryption library (Python 2) python-keyring/stable,stable 10.1-1 all store and access your passwords safely python-keyrings.alt/stable,stable 1.3-1 all alternate backend implementations for python-keyring python-secretstorage/stable,stable 2.3.1-2 all Python module for storing secrets - Python 2.x version python-secretstorage-doc/stable,stable 2.3.1-2 all Python module for storing secrets - documentation python3-gpg/stable,stable 1.8.0-3+b2 amd64 Python interface to the GPGME GnuPG encryption library (Python 3) python3-keyring/stable,stable 10.1-1 all store and access your passwords safely - Python 3 version of the package python3-keyrings.alt/stable,stable 1.3-1 all alternate backend implementations for python3-keyring python3-secretstorage/stable,stable 2.3.1-2 all Python module for storing secrets - Python 3.x version qt5keychain-dev/stable,stable 0.7.0-3 amd64 Development files for qtkeychain (QT5 version) qtkeychain-dev/stable,stable 0.7.0-3 amd64 Development files for qtkeychain remmina-plugin-gnome/stretch-backports 1.2.0-rcgit.24-2~bpo9+1 amd64 GNOME plugin for remmina remote desktop client remmina-plugin-secret/stretch-backports 1.2.0-rcgit.26+dfsg-1~bpo9+1 amd64 Secret plugin for Remmina signing-party/stable,stable 2.5-1 amd64 Various OpenPGP related tools ubuntu-archive-keyring/stable,stable 2016.05.13-1 all GnuPG keys of the Ubuntu archive webauth-utils/stable,stable 4.7.0-4 amd64 Command-line utilities for WebAuth authentication xul-ext-gnome-keyring/stable,stable 0.12-1 all Store mozilla passwords in GNOME Keyring
w konsoli wszystkie na zielono
Ostatnio edytowany przez Ainat (2018-02-14 18:41:57)
Offline
#19 2018-02-14 18:48:58
Ainat - Użytkownik
- Ainat
- Użytkownik
- Zarejestrowany: 2018-01-05
Re: Debian Stretch i problemy z instalacją i po instalacji
jeżeli chodzi o sprawę z dyskami to wywala czarny ekran z informacją ,że nie znalazł plików startowych i można jedynie pisać w konsoli albo wycofać się do kolejnego restartu. Opsałem szczegółowo wszystko wyżej
Offline
#20 2018-02-14 18:50:00
Ainat - Użytkownik
- Ainat
- Użytkownik
- Zarejestrowany: 2018-01-05
Re: Debian Stretch i problemy z instalacją i po instalacji
tego
Kod:
aptitude -R install nvidia-legacy-304xx-kernel-dkms nvidia-legacy-304xx-driver nvidia-settings-legacy-304xx
nie mozna zainstalować , dlaczemu?
Ostatnio edytowany przez Ainat (2018-02-14 18:50:41)
Offline
#21 2018-02-14 18:58:01
Ainat - Użytkownik
- Ainat
- Użytkownik
- Zarejestrowany: 2018-01-05
Re: Debian Stretch i problemy z instalacją i po instalacji
Kod:
https://wiki.debian.org/NvidiaGraphicsDrivers#Version_304.135_.28legacy_GPUs.29
W/g tego poradnika zainstalowało się normalnie , zobaczymy po restarcie
Po restarcie polecenie
Kod:
nvidia-detect
Detected NVIDIA GPUs:
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV43 [GeForce 6600 GT] [10de:0140] (rev a2)
Checking card: NVIDIA Corporation NV43 [GeForce 6600 GT] (rev a2)
Your card is only supported up to the 304 legacy drivers series.
It is recommended to install the
nvidia-legacy-304xx-driver
Polecenie
Kod:
nvidia-xconfig
odpowiada
Kod:
bash: nvidia-xconfig: nie znaleziono polecenia
Wyczerpują się pokłady mojej osobistej cierpliwości a jestem wyjątkowo spokojny człowiek
Ostatnio edytowany przez Ainat (2018-02-14 19:10:40)
Offline
#22 2018-02-14 19:02:22
andreq - Członek DUG
- andreq
- Członek DUG
- Skąd: Nisko
- Zarejestrowany: 2005-01-11
Re: Debian Stretch i problemy z instalacją i po instalacji
Co do dysków: ustaw w biosie odpowiadającą Ci kolejność bootowania
Offline
#23 2018-02-14 19:13:24
Ainat - Użytkownik
- Ainat
- Użytkownik
- Zarejestrowany: 2018-01-05
Re: Debian Stretch i problemy z instalacją i po instalacji
nic to nie daje , ja na płycie mam takie boot menu,że mogę sobie wybierać z którego ma startować. Problem jest w botloaderze debiana a nie w moim kompie.
Tak jak by jego możliwości kończyły się na obsłudze 3dysków.
Ostatnio edytowany przez Ainat (2018-02-14 19:32:43)
Offline
#24 2018-02-14 19:15:17
Ainat - Użytkownik
- Ainat
- Użytkownik
- Zarejestrowany: 2018-01-05
Re: Debian Stretch i problemy z instalacją i po instalacji
No i się jednak zainstalowały , mam zakładce Administracja panel Nvidi . Hura!!! po tygodniu męczarni. Teraz została do rozwiązania sprawa dysków
Ostatnio edytowany przez Ainat (2018-02-14 19:33:03)
Offline
#25 2018-02-14 19:35:51
andreq - Członek DUG
- andreq
- Członek DUG
- Skąd: Nisko
- Zarejestrowany: 2005-01-11
Re: Debian Stretch i problemy z instalacją i po instalacji
Może i problem jest w bootloaderze, ale jak nie podasz komunikatu/logów to nikt nie domyśli się co nie działa. Wklej co wypisuje jak masz podpięte wszystkie dyski. Chociaż jak system startuje z jednym, to powinien startować przy wszystkich jak ten z debianem będzie posdpięty do portu sata1
Ostatnio edytowany przez andreq (2018-02-14 19:37:48)
Offline
- Forum Debian Users Gang
- » Instalacja i podstawowa konfiguracja
- » Debian Stretch i problemy z instalacją i po instalacji
Informacje debugowania
| Time (s) | Query |
|---|---|
| 0.00015 | SET CHARSET latin2 |
| 0.00004 | SET NAMES latin2 |
| 0.00167 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.135.193.234' WHERE u.id=1 |
| 0.00080 | REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '3.135.193.234', 1734504746) |
| 0.00043 | SELECT * FROM punbb_online WHERE logged<1734504446 |
| 0.00022 | SELECT topic_id FROM punbb_posts WHERE id=317608 |
| 0.00021 | SELECT id FROM punbb_posts WHERE topic_id=30285 ORDER BY posted |
| 0.00034 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=30285 AND t.moved_to IS NULL |
| 0.00029 | SELECT search_for, replace_with FROM punbb_censoring |
| 0.00169 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=30285 ORDER BY p.id LIMIT 0,25 |
| 0.00077 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=30285 |
| Total query time: 0.00661 s | |