Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
#1 2018-05-12 09:49:56
jacekz - 
Użytkownik
- jacekz
- Użytkownik
- Skąd: Lubuskie
- Zarejestrowany: 2013-01-20
startx - z czym ma problem?
Po aktualizacji z 9 maja X-sy startują z bardzo dużym opóźnieniem (lub w ogóle).
tzn:
Ręczne wykonanie [b]startx[/b] skutkuje tym, że pierwsze wywołanie polecenia nie daje efektu i po przerwaniu (Ctrl-c) po drugim startx wstają natychmiast :/ ?
... Gdzie jest problem?...
[b]
/home/jacek/.local/share/xorg/Xorg.0.log[/b]
Kod:
[ 32.601]
X.Org X Server 1.19.6
Release Date: 2017-12-20
[ 32.601] X Protocol Version 11, Revision 0
[ 32.601] Build Operating System: Linux 4.9.0-5-amd64 x86_64 Debian
[ 32.601] Current Operating System: Linux debian 4.16.0-1-amd64 #1 SMP Debian 4.16.5-1 (2018-04-29) x86_64
[ 32.601] Kernel command line: root=UUID=18a3fb1a-f2f5-4450-b569-dfb54e08e337 ro quiet rootfstype=xfs add_efi_memmap initrd=\EFI\debian\initrd.img
[ 32.601] Build Date: 26 January 2018 04:30:21PM
[ 32.601] xorg-server 2:1.19.6-1 (https://www.debian.org/support)
[ 32.601] Current version of pixman: 0.34.0
[ 32.601] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 32.601] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 32.601] (==) Log file: "/home/jacek/.local/share/xorg/Xorg.0.log", Time: Sat May 12 09:34:39 2018
[ 32.603] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 32.604] (==) No Layout section. Using the first Screen section.
[ 32.604] (==) No screen section available. Using defaults.
[ 32.604] (**) |-->Screen "Default Screen Section" (0)
[ 32.604] (**) | |-->Monitor "<default monitor>"
[ 32.605] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 32.605] (==) Automatically adding devices
[ 32.605] (==) Automatically enabling devices
[ 32.605] (==) Automatically adding GPU devices
[ 32.605] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 32.606] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 32.606] Entry deleted from font path.
[ 32.607] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 32.607] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 32.607] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 32.608] (II) Loader magic: 0x56324bcdbde0
[ 32.608] (II) Module ABI versions:
[ 32.608] X.Org ANSI C Emulation: 0.4
[ 32.608] X.Org Video Driver: 23.0
[ 32.608] X.Org XInput driver : 24.1
[ 32.608] X.Org Server Extension : 10.0
[ 32.609] (++) using VT number 1
[ 32.611] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[ 32.611] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 32.612] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 32.615] (--) PCI:*(0:0:2:0) 8086:041e:1043:8534 rev 6, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 32.615] (II) LoadModule: "glx"
[ 32.616] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 32.624] (II) Module glx: vendor="X.Org Foundation"
[ 32.624] compiled for 1.19.6, module version = 1.0.0
[ 32.624] ABI class: X.Org Server Extension, version 10.0
[ 32.624] (==) Matched modesetting as autoconfigured driver 0
[ 32.624] (==) Matched fbdev as autoconfigured driver 1
[ 32.624] (==) Matched vesa as autoconfigured driver 2
[ 32.624] (==) Assigned the driver to the xf86ConfigLayout
[ 32.624] (II) LoadModule: "modesetting"
[ 32.627] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 32.628] (II) Module modesetting: vendor="X.Org Foundation"
[ 32.628] compiled for 1.19.6, module version = 1.19.6
[ 32.628] Module class: X.Org Video Driver
[ 32.628] ABI class: X.Org Video Driver, version 23.0
[ 32.628] (II) LoadModule: "fbdev"
[ 32.628] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 32.628] (II) Module fbdev: vendor="X.Org Foundation"
[ 32.629] compiled for 1.19.0, module version = 0.4.4
[ 32.629] Module class: X.Org Video Driver
[ 32.629] ABI class: X.Org Video Driver, version 23.0
[ 32.629] (II) LoadModule: "vesa"
[ 32.629] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 32.629] (II) Module vesa: vendor="X.Org Foundation"
[ 32.629] compiled for 1.19.0, module version = 2.3.4
[ 32.629] Module class: X.Org Video Driver
[ 32.629] ABI class: X.Org Video Driver, version 23.0
[ 32.629] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 32.629] (II) FBDEV: driver for framebuffer: fbdev
[ 32.629] (II) VESA: driver for VESA chipsets: vesa
[ 32.629] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 32.629] (II) modeset(0): using drv /dev/dri/card0
[ 32.629] (WW) Falling back to old probe method for fbdev
[ 32.629] (II) Loading sub module "fbdevhw"
[ 32.629] (II) LoadModule: "fbdevhw"
[ 32.629] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 32.630] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 32.630] compiled for 1.19.6, module version = 0.0.2
[ 32.630] ABI class: X.Org Video Driver, version 23.0
[ 32.630] (WW) Falling back to old probe method for vesa
[ 32.630] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 32.630] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 32.630] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 32.630] (==) modeset(0): RGB weight 888
[ 32.630] (==) modeset(0): Default visual is TrueColor
[ 32.630] (II) Loading sub module "glamoregl"
[ 32.630] (II) LoadModule: "glamoregl"
[ 32.630] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 32.640] (II) Module glamoregl: vendor="X.Org Foundation"
[ 32.640] compiled for 1.19.6, module version = 1.0.0
[ 32.640] ABI class: X.Org ANSI C Emulation, version 0.4
[ 32.640] (II) glamor: OpenGL accelerated X.org driver based.
[ 32.672] (II) glamor: EGL version 1.4 (DRI2):
[ 32.684] (II) modeset(0): glamor initialized
[ 32.686] (II) modeset(0): Output eDP-1 has no monitor section
[ 32.699] (II) modeset(0): Output VGA-1 has no monitor section
[ 32.700] (II) modeset(0): Output HDMI-1 has no monitor section
[ 32.714] (II) modeset(0): Output HDMI-2 has no monitor section
[ 32.716] (II) modeset(0): EDID for output eDP-1
[ 32.716] (II) modeset(0): Printing probed modes for output eDP-1
[ 32.716] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2053 2200 1080 1083 1089 1125 -hsync -vsync (67.5 kHz P)
[ 32.716] (II) modeset(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz d)
[ 32.716] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz d)
[ 32.716] (II) modeset(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz d)
[ 32.716] (II) modeset(0): Modeline "1600x1024"x60.2 103.12 1600 1600 1656 1664 1024 1024 1029 1030 +hsync +vsync (62.0 kHz d)
[ 32.716] (II) modeset(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 32.716] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 32.716] (II) modeset(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz d)
[ 32.716] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 32.716] (II) modeset(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz d)
[ 32.716] (II) modeset(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz d)
[ 32.716] (II) modeset(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 -hsync +vsync (53.7 kHz d)
[ 32.716] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 32.716] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 32.716] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 32.716] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 32.716] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 32.716] (II) modeset(0): Modeline "960x600"x120.0 77.00 960 984 1000 1040 600 601 604 617 doublescan +hsync -vsync (74.0 kHz d)
[ 32.716] (II) modeset(0): Modeline "960x540"x120.0 69.25 960 984 1000 1040 540 541 544 555 doublescan +hsync -vsync (66.6 kHz d)
[ 32.716] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 32.716] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 32.716] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 32.716] (II) modeset(0): Modeline "840x525"x120.0 73.12 840 892 980 1120 525 526 529 544 doublescan -hsync +vsync (65.3 kHz d)
[ 32.716] (II) modeset(0): Modeline "840x525"x119.8 59.50 840 864 880 920 525 526 529 540 doublescan +hsync -vsync (64.7 kHz d)
[ 32.716] (II) modeset(0): Modeline "800x512"x120.3 51.56 800 800 828 832 512 512 514 515 doublescan +hsync +vsync (62.0 kHz d)
[ 32.716] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 32.716] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 32.716] (II) modeset(0): Modeline "720x450"x119.8 53.25 720 760 836 952 450 451 454 467 doublescan -hsync +vsync (55.9 kHz d)
[ 32.716] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 32.716] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 32.716] (II) modeset(0): Modeline "680x384"x119.6 42.38 680 716 784 888 384 385 390 399 doublescan -hsync +vsync (47.7 kHz d)
[ 32.716] (II) modeset(0): Modeline "680x384"x119.9 36.00 680 704 720 760 384 385 390 395 doublescan +hsync -vsync (47.4 kHz d)
[ 32.716] (II) modeset(0): Modeline "576x432"x120.1 40.81 576 608 668 760 432 432 434 447 doublescan -hsync +vsync (53.7 kHz d)
[ 32.716] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 32.716] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 32.716] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 32.716] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 32.729] (II) modeset(0): EDID for output VGA-1
[ 32.731] (II) modeset(0): EDID for output HDMI-1
[ 32.744] (II) modeset(0): EDID for output HDMI-2
[ 32.744] (II) modeset(0): Manufacturer: ACR Model: 198 Serial#: 272639795
[ 32.744] (II) modeset(0): Year: 2011 Week: 4
[ 32.744] (II) modeset(0): EDID Version: 1.3
[ 32.744] (II) modeset(0): Digital Display Input
[ 32.744] (II) modeset(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 32.744] (II) modeset(0): Gamma: 2.20
[ 32.744] (II) modeset(0): DPMS capabilities: Off
[ 32.744] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 32.744] (II) modeset(0): First detailed timing is preferred mode
[ 32.744] (II) modeset(0): redX: 0.631 redY: 0.349 greenX: 0.341 greenY: 0.622
[ 32.744] (II) modeset(0): blueX: 0.152 blueY: 0.058 whiteX: 0.313 whiteY: 0.329
[ 32.744] (II) modeset(0): Supported established timings:
[ 32.744] (II) modeset(0): 720x400@70Hz
[ 32.744] (II) modeset(0): 640x480@60Hz
[ 32.745] (II) modeset(0): 640x480@67Hz
[ 32.745] (II) modeset(0): 800x600@56Hz
[ 32.745] (II) modeset(0): 800x600@60Hz
[ 32.745] (II) modeset(0): 1024x768@60Hz
[ 32.745] (II) modeset(0): 1024x768@70Hz
[ 32.745] (II) modeset(0): Manufacturer's mask: 0
[ 32.745] (II) modeset(0): Supported standard timings:
[ 32.745] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 32.745] (II) modeset(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 32.745] (II) modeset(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 32.745] (II) modeset(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 32.745] (II) modeset(0): #4: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 32.745] (II) modeset(0): Supported detailed timing:
[ 32.745] (II) modeset(0): clock: 148.5 MHz Image Size: 477 x 268 mm
[ 32.745] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 32.745] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 32.745] (II) modeset(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 32.745] (II) modeset(0): Monitor name: Acer P226HQL
[ 32.745] (II) modeset(0): Serial No: LNJ0W0034320
[ 32.745] (II) modeset(0): EDID (in hex):
[ 32.745] (II) modeset(0): 00ffffffffffff000472980133274010
[ 32.745] (II) modeset(0): 0415010380301b782a9535a159579f27
[ 32.745] (II) modeset(0): 0e5054b30c00714f810081809500d1c0
[ 32.745] (II) modeset(0): 010101010101023a801871382d40582c
[ 32.745] (II) modeset(0): 4500dd0c1100001e000000fd00384b1e
[ 32.745] (II) modeset(0): 5311000a202020202020000000fc0041
[ 32.745] (II) modeset(0): 636572205032323648514c0a000000ff
[ 32.745] (II) modeset(0): 004c4e4a3057303033343332300a002c
[ 32.745] (II) modeset(0): Printing probed modes for output HDMI-2
[ 32.745] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 32.745] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 32.745] (II) modeset(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 32.745] (II) modeset(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
[ 32.745] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 32.745] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 32.745] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 32.745] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 32.745] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 32.745] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 32.745] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 32.745] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 32.745] (II) modeset(0): Output eDP-1 connected
[ 32.745] (II) modeset(0): Output VGA-1 disconnected
[ 32.745] (II) modeset(0): Output HDMI-1 disconnected
[ 32.745] (II) modeset(0): Output HDMI-2 connected
[ 32.745] (II) modeset(0): Using spanning desktop for initial modes
[ 32.745] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[ 32.745] (II) modeset(0): Output HDMI-2 using initial mode 1920x1080 +1920+0
[ 32.745] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 32.745] (==) modeset(0): DPI set to (96, 96)
[ 32.745] (II) Loading sub module "fb"
[ 32.745] (II) LoadModule: "fb"
[ 32.745] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 32.746] (II) Module fb: vendor="X.Org Foundation"
[ 32.746] compiled for 1.19.6, module version = 1.0.0
[ 32.746] ABI class: X.Org ANSI C Emulation, version 0.4
[ 32.746] (II) UnloadModule: "fbdev"
[ 32.746] (II) Unloading fbdev
[ 32.746] (II) UnloadSubModule: "fbdevhw"
[ 32.746] (II) Unloading fbdevhw
[ 32.746] (II) UnloadModule: "vesa"
[ 32.746] (II) Unloading vesa
[ 32.746] (==) Depth 24 pixmap format is 32 bpp
[ 32.814] (==) modeset(0): Backing store enabled
[ 32.814] (==) modeset(0): Silken mouse enabled
[ 32.814] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 32.933] (==) modeset(0): DPMS enabled
[ 32.933] (II) modeset(0): [DRI2] Setup complete
[ 32.933] (II) modeset(0): [DRI2] DRI driver: i965
[ 32.933] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 32.933] (--) RandR disabled
[ 32.938] (II) SELinux: Disabled on system
[ 32.944] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 32.944] (II) AIGLX: enabled GLX_ARB_create_context
[ 32.944] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 32.944] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 32.944] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 32.944] (II) AIGLX: enabled GLX_SGI_swap_control
[ 32.944] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 32.944] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 32.944] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 32.944] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 32.944] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 32.945] (II) AIGLX: Loaded and initialized i965
[ 32.945] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 32.947] (II) modeset(0): Damage tracking initialized
[ 32.947] (II) modeset(0): Setting screen physical size to 1016 x 285
[ 32.999] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 32.999] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 32.999] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 32.999] (II) LoadModule: "libinput"
[ 33.001] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 33.007] (II) Module libinput: vendor="X.Org Foundation"
[ 33.007] compiled for 1.19.6, module version = 0.27.1
[ 33.007] Module class: X.Org XInput Driver
[ 33.007] ABI class: X.Org XInput driver, version 24.1
[ 33.007] (II) Using input driver 'libinput' for 'Power Button'
[ 33.008] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 20 paused 0
[ 33.008] (**) Power Button: always reports core events
[ 33.008] (**) Option "Device" "/dev/input/event1"
[ 33.008] (**) Option "_source" "server/udev"
[ 33.008] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 33.008] (II) event1 - Power Button: device is a keyboard
[ 33.008] (II) event1 - Power Button: device removed
[ 33.008] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 33.008] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 33.008] (**) Option "xkb_model" "pc105"
[ 33.008] (**) Option "xkb_layout" "pl"
[ 33.023] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 33.023] (II) event1 - Power Button: device is a keyboard
[ 33.023] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 33.023] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 33.023] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 33.023] (II) Using input driver 'libinput' for 'Video Bus'
[ 33.024] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 23 paused 0
[ 33.024] (**) Video Bus: always reports core events
[ 33.024] (**) Option "Device" "/dev/input/event7"
[ 33.024] (**) Option "_source" "server/udev"
[ 33.024] (II) event7 - Video Bus: is tagged by udev as: Keyboard
[ 33.024] (II) event7 - Video Bus: device is a keyboard
[ 33.024] (II) event7 - Video Bus: device removed
[ 33.024] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10/event7"
[ 33.024] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 33.024] (**) Option "xkb_model" "pc105"
[ 33.024] (**) Option "xkb_layout" "pl"
[ 33.025] (II) event7 - Video Bus: is tagged by udev as: Keyboard
[ 33.025] (II) event7 - Video Bus: device is a keyboard
[ 33.025] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 33.025] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 33.025] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 33.025] (II) Using input driver 'libinput' for 'Power Button'
[ 33.026] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 24 paused 0
[ 33.026] (**) Power Button: always reports core events
[ 33.026] (**) Option "Device" "/dev/input/event0"
[ 33.026] (**) Option "_source" "server/udev"
[ 33.026] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 33.026] (II) event0 - Power Button: device is a keyboard
[ 33.026] (II) event0 - Power Button: device removed
[ 33.026] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 33.026] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 33.026] (**) Option "xkb_model" "pc105"
[ 33.026] (**) Option "xkb_layout" "pl"
[ 33.027] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 33.027] (II) event0 - Power Button: device is a keyboard
[ 33.027] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event13)
[ 33.027] (II) No input driver specified, ignoring this device.
[ 33.027] (II) This device may have been added with another device file.
[ 33.027] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event14)
[ 33.027] (II) No input driver specified, ignoring this device.
[ 33.027] (II) This device may have been added with another device file.
[ 33.027] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event15)
[ 33.027] (II) No input driver specified, ignoring this device.
[ 33.027] (II) This device may have been added with another device file.
[ 33.028] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=9 (/dev/input/event16)
[ 33.028] (II) No input driver specified, ignoring this device.
[ 33.028] (II) This device may have been added with another device file.
[ 33.028] (II) config/udev: Adding input device USB Keyboard (/dev/input/event3)
[ 33.028] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 33.028] (**) USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 33.028] (II) Using input driver 'libinput' for ' USB Keyboard'
[ 33.030] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 25 paused 0
[ 33.030] (**) USB Keyboard: always reports core events
[ 33.030] (**) Option "Device" "/dev/input/event3"
[ 33.030] (**) Option "_source" "server/udev"
[ 33.030] (II) event3 - USB Keyboard: is tagged by udev as: Keyboard
[ 33.030] (II) event3 - USB Keyboard: device is a keyboard
[ 33.030] (II) event3 - USB Keyboard: device removed
[ 33.030] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:04D9:1702.0001/input/input3/event3"
[ 33.030] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD, id 9)
[ 33.030] (**) Option "xkb_model" "pc105"
[ 33.030] (**) Option "xkb_layout" "pl"
[ 33.031] (II) event3 - USB Keyboard: is tagged by udev as: Keyboard
[ 33.031] (II) event3 - USB Keyboard: device is a keyboard
[ 33.031] (II) config/udev: Adding input device USB Keyboard (/dev/input/event5)
[ 33.031] (**) USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 33.031] (**) USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 33.031] (II) Using input driver 'libinput' for ' USB Keyboard'
[ 33.033] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 26 paused 0
[ 33.033] (**) USB Keyboard: always reports core events
[ 33.033] (**) Option "Device" "/dev/input/event5"
[ 33.033] (**) Option "_source" "server/udev"
[ 33.033] (II) event5 - USB Keyboard: is tagged by udev as: Keyboard
[ 33.033] (II) event5 - USB Keyboard: device is a keyboard
[ 33.033] (II) event5 - USB Keyboard: device removed
[ 33.033] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:04D9:1702.0002/input/input9/event5"
[ 33.033] (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD, id 10)
[ 33.033] (**) Option "xkb_model" "pc105"
[ 33.033] (**) Option "xkb_layout" "pl"
[ 33.034] (II) event5 - USB Keyboard: is tagged by udev as: Keyboard
[ 33.034] (II) event5 - USB Keyboard: device is a keyboard
[ 33.034] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event11)
[ 33.034] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 33.034] (**) Logitech USB Receiver: Applying InputClass "libinput pointer catchall"
[ 33.034] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[ 33.092] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 27 paused 0
[ 33.092] (**) Logitech USB Receiver: always reports core events
[ 33.092] (**) Option "Device" "/dev/input/event11"
[ 33.092] (**) Option "_source" "server/udev"
[ 33.093] (II) event11 - Logitech USB Receiver: is tagged by udev as: Mouse
[ 33.093] (II) event11 - Logitech USB Receiver: device set to 1000 DPI
[ 33.093] (II) event11 - Logitech USB Receiver: device is a pointer
[ 33.093] (II) event11 - Logitech USB Receiver: device removed
[ 33.093] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:046D:C52F.0003/input/input11/event11"
[ 33.093] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 11)
[ 33.094] (**) Option "AccelerationScheme" "none"
[ 33.094] (**) Logitech USB Receiver: (accel) selected scheme none/0
[ 33.094] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 33.094] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 33.094] (II) event11 - Logitech USB Receiver: is tagged by udev as: Mouse
[ 33.094] (II) event11 - Logitech USB Receiver: device set to 1000 DPI
[ 33.094] (II) event11 - Logitech USB Receiver: device is a pointer
[ 33.095] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 33.095] (II) No input driver specified, ignoring this device.
[ 33.095] (II) This device may have been added with another device file.
[ 33.097] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event12)
[ 33.097] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 33.097] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[ 33.097] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[ 33.099] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 28 paused 0
[ 33.099] (**) Logitech USB Receiver: always reports core events
[ 33.099] (**) Option "Device" "/dev/input/event12"
[ 33.099] (**) Option "_source" "server/udev"
[ 33.100] (II) event12 - Logitech USB Receiver: is tagged by udev as: Keyboard
[ 33.100] (II) event12 - Logitech USB Receiver: device is a keyboard
[ 33.100] (II) event12 - Logitech USB Receiver: device removed
[ 33.100] (II) libinput: Logitech USB Receiver: needs a virtual subdevice
[ 33.100] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:046D:C52F.0004/input/input12/event12"
[ 33.100] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 12)
[ 33.101] (**) Option "AccelerationScheme" "none"
[ 33.101] (**) Logitech USB Receiver: (accel) selected scheme none/0
[ 33.101] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 33.101] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 33.102] (II) event12 - Logitech USB Receiver: is tagged by udev as: Keyboard
[ 33.102] (II) event12 - Logitech USB Receiver: device is a keyboard
[ 33.102] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event6)
[ 33.102] (II) No input driver specified, ignoring this device.
[ 33.102] (II) This device may have been added with another device file.
[ 33.103] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event8)
[ 33.103] (II) No input driver specified, ignoring this device.
[ 33.103] (II) This device may have been added with another device file.
[ 33.104] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event9)
[ 33.104] (II) No input driver specified, ignoring this device.
[ 33.104] (II) This device may have been added with another device file.
[ 33.104] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10)
[ 33.104] (II) No input driver specified, ignoring this device.
[ 33.104] (II) This device may have been added with another device file.
[ 33.105] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event4)
[ 33.105] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 33.105] (**) Eee PC WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 33.105] (II) Using input driver 'libinput' for 'Eee PC WMI hotkeys'
[ 33.107] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 29 paused 0
[ 33.107] (**) Eee PC WMI hotkeys: always reports core events
[ 33.107] (**) Option "Device" "/dev/input/event4"
[ 33.107] (**) Option "_source" "server/udev"
[ 33.108] (II) event4 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[ 33.108] (II) event4 - Eee PC WMI hotkeys: device is a keyboard
[ 33.108] (II) event4 - Eee PC WMI hotkeys: device removed
[ 33.108] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input4/event4"
[ 33.108] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 13)
[ 33.108] (**) Option "xkb_model" "pc105"
[ 33.108] (**) Option "xkb_layout" "pl"
[ 33.108] (II) event4 - Eee PC WMI hotkeys: is tagged by udev as: Keyboard
[ 33.108] (II) event4 - Eee PC WMI hotkeys: device is a keyboard
[ 33.108] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 33.108] (II) No input driver specified, ignoring this device.
[ 33.108] (II) This device may have been added with another device file.
[ 33.109] (II) config/udev: Adding input device (unnamed) (/dev/ttyS1)
[ 33.109] (II) No input driver specified, ignoring this device.
[ 33.109] (II) This device may have been added with another device file.
[ 33.109] (II) config/udev: Adding input device (unnamed) (/dev/ttyS2)
[ 33.109] (II) No input driver specified, ignoring this device.
[ 33.109] (II) This device may have been added with another device file.
[ 33.109] (II) config/udev: Adding input device (unnamed) (/dev/ttyS3)
[ 33.109] (II) No input driver specified, ignoring this device.
[ 33.109] (II) This device may have been added with another device file.
[ 33.109] (II) config/udev: Adding input device (unnamed) (/dev/ttyS0)
[ 33.109] (II) No input driver specified, ignoring this device.
[ 33.109] (II) This device may have been added with another device file.
[ 33.109] (II) config/udev: Adding input device (unnamed) (/dev/input/mice)
[ 33.109] (II) No input driver specified, ignoring this device.
[ 33.109] (II) This device may have been added with another device file.
[ 33.109] (II) config/udev: Adding input device (unnamed) (/dev/console)
[ 33.109] (II) No input driver specified, ignoring this device.
[ 33.109] (II) This device may have been added with another device file.
[ 33.109] (II) config/udev: Adding input device (unnamed) (/dev/ptmx)
[ 33.109] (II) No input driver specified, ignoring this device.
[ 33.109] (II) This device may have been added with another device file.
[ 33.110] (II) config/udev: Adding input device (unnamed) (/dev/tty)
[ 33.110] (II) No input driver specified, ignoring this device.
[ 33.110] (II) This device may have been added with another device file.
[ 33.110] (II) config/udev: Adding input device (unnamed) (/dev/tty0)
[ 33.110] (II) No input driver specified, ignoring this device.
[ 33.110] (II) This device may have been added with another device file.
[ 33.110] (II) config/udev: Adding input device (unnamed) (/dev/tty1)
[ 33.110] (II) No input driver specified, ignoring this device.
[ 33.110] (II) This device may have been added with another device file.
[ 33.110] (II) config/udev: Adding input device (unnamed) (/dev/tty10)
[ 33.110] (II) No input driver specified, ignoring this device.
[ 33.110] (II) This device may have been added with another device file.
[ 33.110] (II) config/udev: Adding input device (unnamed) (/dev/tty11)
[ 33.110] (II) No input driver specified, ignoring this device.
[ 33.110] (II) This device may have been added with another device file.
[ 33.110] (II) config/udev: Adding input device (unnamed) (/dev/tty12)
[ 33.110] (II) No input driver specified, ignoring this device.
[ 33.110] (II) This device may have been added with another device file.
[ 33.110] (II) config/udev: Adding input device (unnamed) (/dev/tty13)
[ 33.110] (II) No input driver specified, ignoring this device.
[ 33.110] (II) This device may have been added with another device file.
[ 33.110] (II) config/udev: Adding input device (unnamed) (/dev/tty14)
[ 33.110] (II) No input driver specified, ignoring this device.
[ 33.110] (II) This device may have been added with another device file.
[ 33.110] (II) config/udev: Adding input device (unnamed) (/dev/tty15)
[ 33.110] (II) No input driver specified, ignoring this device.
[ 33.110] (II) This device may have been added with another device file.
[ 33.110] (II) config/udev: Adding input device (unnamed) (/dev/tty16)
[ 33.110] (II) No input driver specified, ignoring this device.
[ 33.110] (II) This device may have been added with another device file.
[ 33.111] (II) config/udev: Adding input device (unnamed) (/dev/tty17)
[ 33.111] (II) No input driver specified, ignoring this device.
[ 33.111] (II) This device may have been added with another device file.
[ 33.111] (II) config/udev: Adding input device (unnamed) (/dev/tty18)
[ 33.111] (II) No input driver specified, ignoring this device.
[ 33.111] (II) This device may have been added with another device file.
[ 33.111] (II) config/udev: Adding input device (unnamed) (/dev/tty19)
[ 33.111] (II) No input driver specified, ignoring this device.
[ 33.111] (II) This device may have been added with another device file.
[ 33.111] (II) config/udev: Adding input device (unnamed) (/dev/tty2)
[ 33.111] (II) No input driver specified, ignoring this device.
[ 33.111] (II) This device may have been added with another device file.
[ 33.111] (II) config/udev: Adding input device (unnamed) (/dev/tty20)
[ 33.111] (II) No input driver specified, ignoring this device.
[ 33.111] (II) This device may have been added with another device file.
[ 33.111] (II) config/udev: Adding input device (unnamed) (/dev/tty21)
[ 33.111] (II) No input driver specified, ignoring this device.
[ 33.111] (II) This device may have been added with another device file.
[ 33.111] (II) config/udev: Adding input device (unnamed) (/dev/tty22)
[ 33.111] (II) No input driver specified, ignoring this device.
[ 33.111] (II) This device may have been added with another device file.
[ 33.111] (II) config/udev: Adding input device (unnamed) (/dev/tty23)
[ 33.111] (II) No input driver specified, ignoring this device.
[ 33.111] (II) This device may have been added with another device file.
[ 33.111] (II) config/udev: Adding input device (unnamed) (/dev/tty24)
[ 33.111] (II) No input driver specified, ignoring this device.
[ 33.111] (II) This device may have been added with another device file.
[ 33.111] (II) config/udev: Adding input device (unnamed) (/dev/tty25)
[ 33.111] (II) No input driver specified, ignoring this device.
[ 33.111] (II) This device may have been added with another device file.
[ 33.112] (II) config/udev: Adding input device (unnamed) (/dev/tty26)
[ 33.112] (II) No input driver specified, ignoring this device.
[ 33.112] (II) This device may have been added with another device file.
[ 33.112] (II) config/udev: Adding input device (unnamed) (/dev/tty27)
[ 33.112] (II) No input driver specified, ignoring this device.
[ 33.112] (II) This device may have been added with another device file.
[ 33.112] (II) config/udev: Adding input device (unnamed) (/dev/tty28)
[ 33.112] (II) No input driver specified, ignoring this device.
[ 33.112] (II) This device may have been added with another device file.
[ 33.112] (II) config/udev: Adding input device (unnamed) (/dev/tty29)
[ 33.112] (II) No input driver specified, ignoring this device.
[ 33.112] (II) This device may have been added with another device file.
[ 33.112] (II) config/udev: Adding input device (unnamed) (/dev/tty3)
[ 33.112] (II) No input driver specified, ignoring this device.
[ 33.112] (II) This device may have been added with another device file.
[ 33.112] (II) config/udev: Adding input device (unnamed) (/dev/tty30)
[ 33.112] (II) No input driver specified, ignoring this device.
[ 33.112] (II) This device may have been added with another device file.
[ 33.112] (II) config/udev: Adding input device (unnamed) (/dev/tty31)
[ 33.112] (II) No input driver specified, ignoring this device.
[ 33.112] (II) This device may have been added with another device file.
[ 33.112] (II) config/udev: Adding input device (unnamed) (/dev/tty32)
[ 33.112] (II) No input driver specified, ignoring this device.
[ 33.112] (II) This device may have been added with another device file.
[ 33.112] (II) config/udev: Adding input device (unnamed) (/dev/tty33)
[ 33.112] (II) No input driver specified, ignoring this device.
[ 33.112] (II) This device may have been added with another device file.
[ 33.112] (II) config/udev: Adding input device (unnamed) (/dev/tty34)
[ 33.112] (II) No input driver specified, ignoring this device.
[ 33.112] (II) This device may have been added with another device file.
[ 33.113] (II) config/udev: Adding input device (unnamed) (/dev/tty35)
[ 33.113] (II) No input driver specified, ignoring this device.
[ 33.113] (II) This device may have been added with another device file.
[ 33.113] (II) config/udev: Adding input device (unnamed) (/dev/tty36)
[ 33.113] (II) No input driver specified, ignoring this device.
[ 33.113] (II) This device may have been added with another device file.
[ 33.113] (II) config/udev: Adding input device (unnamed) (/dev/tty37)
[ 33.113] (II) No input driver specified, ignoring this device.
[ 33.113] (II) This device may have been added with another device file.
[ 33.113] (II) config/udev: Adding input device (unnamed) (/dev/tty38)
[ 33.113] (II) No input driver specified, ignoring this device.
[ 33.113] (II) This device may have been added with another device file.
[ 33.113] (II) config/udev: Adding input device (unnamed) (/dev/tty39)
[ 33.113] (II) No input driver specified, ignoring this device.
[ 33.113] (II) This device may have been added with another device file.
[ 33.113] (II) config/udev: Adding input device (unnamed) (/dev/tty4)
[ 33.113] (II) No input driver specified, ignoring this device.
[ 33.113] (II) This device may have been added with another device file.
[ 33.113] (II) config/udev: Adding input device (unnamed) (/dev/tty40)
[ 33.113] (II) No input driver specified, ignoring this device.
[ 33.113] (II) This device may have been added with another device file.
[ 33.113] (II) config/udev: Adding input device (unnamed) (/dev/tty41)
[ 33.113] (II) No input driver specified, ignoring this device.
[ 33.113] (II) This device may have been added with another device file.
[ 33.113] (II) config/udev: Adding input device (unnamed) (/dev/tty42)
[ 33.113] (II) No input driver specified, ignoring this device.
[ 33.113] (II) This device may have been added with another device file.
[ 33.113] (II) config/udev: Adding input device (unnamed) (/dev/tty43)
[ 33.113] (II) No input driver specified, ignoring this device.
[ 33.113] (II) This device may have been added with another device file.
[ 33.114] (II) config/udev: Adding input device (unnamed) (/dev/tty44)
[ 33.114] (II) No input driver specified, ignoring this device.
[ 33.114] (II) This device may have been added with another device file.
[ 33.114] (II) config/udev: Adding input device (unnamed) (/dev/tty45)
[ 33.114] (II) No input driver specified, ignoring this device.
[ 33.114] (II) This device may have been added with another device file.
[ 33.114] (II) config/udev: Adding input device (unnamed) (/dev/tty46)
[ 33.114] (II) No input driver specified, ignoring this device.
[ 33.114] (II) This device may have been added with another device file.
[ 33.114] (II) config/udev: Adding input device (unnamed) (/dev/tty47)
[ 33.114] (II) No input driver specified, ignoring this device.
[ 33.114] (II) This device may have been added with another device file.
[ 33.114] (II) config/udev: Adding input device (unnamed) (/dev/tty48)
[ 33.114] (II) No input driver specified, ignoring this device.
[ 33.114] (II) This device may have been added with another device file.
[ 33.114] (II) config/udev: Adding input device (unnamed) (/dev/tty49)
[ 33.114] (II) No input driver specified, ignoring this device.
[ 33.114] (II) This device may have been added with another device file.
[ 33.114] (II) config/udev: Adding input device (unnamed) (/dev/tty5)
[ 33.114] (II) No input driver specified, ignoring this device.
[ 33.114] (II) This device may have been added with another device file.
[ 33.114] (II) config/udev: Adding input device (unnamed) (/dev/tty50)
[ 33.114] (II) No input driver specified, ignoring this device.
[ 33.114] (II) This device may have been added with another device file.
[ 33.114] (II) config/udev: Adding input device (unnamed) (/dev/tty51)
[ 33.114] (II) No input driver specified, ignoring this device.
[ 33.114] (II) This device may have been added with another device file.
[ 33.114] (II) config/udev: Adding input device (unnamed) (/dev/tty52)
[ 33.114] (II) No input driver specified, ignoring this device.
[ 33.114] (II) This device may have been added with another device file.
[ 33.115] (II) config/udev: Adding input device (unnamed) (/dev/tty53)
[ 33.115] (II) No input driver specified, ignoring this device.
[ 33.115] (II) This device may have been added with another device file.
[ 33.115] (II) config/udev: Adding input device (unnamed) (/dev/tty54)
[ 33.115] (II) No input driver specified, ignoring this device.
[ 33.115] (II) This device may have been added with another device file.
[ 33.115] (II) config/udev: Adding input device (unnamed) (/dev/tty55)
[ 33.115] (II) No input driver specified, ignoring this device.
[ 33.115] (II) This device may have been added with another device file.
[ 33.115] (II) config/udev: Adding input device (unnamed) (/dev/tty56)
[ 33.115] (II) No input driver specified, ignoring this device.
[ 33.115] (II) This device may have been added with another device file.
[ 33.115] (II) config/udev: Adding input device (unnamed) (/dev/tty57)
[ 33.115] (II) No input driver specified, ignoring this device.
[ 33.115] (II) This device may have been added with another device file.
[ 33.115] (II) config/udev: Adding input device (unnamed) (/dev/tty58)
[ 33.115] (II) No input driver specified, ignoring this device.
[ 33.115] (II) This device may have been added with another device file.
[ 33.115] (II) config/udev: Adding input device (unnamed) (/dev/tty59)
[ 33.115] (II) No input driver specified, ignoring this device.
[ 33.115] (II) This device may have been added with another device file.
[ 33.115] (II) config/udev: Adding input device (unnamed) (/dev/tty6)
[ 33.115] (II) No input driver specified, ignoring this device.
[ 33.115] (II) This device may have been added with another device file.
[ 33.115] (II) config/udev: Adding input device (unnamed) (/dev/tty60)
[ 33.115] (II) No input driver specified, ignoring this device.
[ 33.115] (II) This device may have been added with another device file.
[ 33.115] (II) config/udev: Adding input device (unnamed) (/dev/tty61)
[ 33.115] (II) No input driver specified, ignoring this device.
[ 33.115] (II) This device may have been added with another device file.
[ 33.115] (II) config/udev: Adding input device (unnamed) (/dev/tty62)
[ 33.116] (II) No input driver specified, ignoring this device.
[ 33.116] (II) This device may have been added with another device file.
[ 33.116] (II) config/udev: Adding input device (unnamed) (/dev/tty63)
[ 33.116] (II) No input driver specified, ignoring this device.
[ 33.116] (II) This device may have been added with another device file.
[ 33.116] (II) config/udev: Adding input device (unnamed) (/dev/tty7)
[ 33.116] (II) No input driver specified, ignoring this device.
[ 33.116] (II) This device may have been added with another device file.
[ 33.116] (II) config/udev: Adding input device (unnamed) (/dev/tty8)
[ 33.116] (II) No input driver specified, ignoring this device.
[ 33.116] (II) This device may have been added with another device file.
[ 33.116] (II) config/udev: Adding input device (unnamed) (/dev/tty9)
[ 33.116] (II) No input driver specified, ignoring this device.
[ 33.116] (II) This device may have been added with another device file.
[ 33.133] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 33.133] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[ 33.133] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[ 33.133] (II) systemd-logind: returning pre-existing fd for /dev/input/event12 13:76
[ 33.133] (**) Logitech USB Receiver: always reports core events
[ 33.133] (**) Option "Device" "/dev/input/event12"
[ 33.133] (**) Option "_source" "_driver/libinput"
[ 33.133] (II) libinput: Logitech USB Receiver: is a virtual subdevice
[ 33.133] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.1/0003:046D:C52F.0004/input/input12/event12"
[ 33.133] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 14)
[ 33.133] (**) Option "xkb_model" "pc105"
[ 33.133] (**) Option "xkb_layout" "pl"
[ 33.920] (II) modeset(0): Allocate new frame buffer 1920x1080 stride
[ 34.056] Using O_TMPFILE
[ 34.056] Using O_TMPFILE
[ 34.059] Using O_TMPFILE
[ 34.060] Using O_TMPFILE
[ 34.061] Using O_TMPFILE
[ 34.061] Using O_TMPFILE
[ 34.075] Using O_TMPFILE
[ 34.076] Using O_TMPFILE
[ 34.076] Using O_TMPFILE
[ 34.077] Using O_TMPFILE
[ 34.079] Using O_TMPFILE
[ 34.079] Using O_TMPFILE
[ 34.080] Using O_TMPFILE
[ 34.080] Using O_TMPFILE
[ 34.080] Using O_TMPFILE
[ 34.081] Using O_TMPFILE
[ 34.081] Using O_TMPFILE
[ 34.082] Using O_TMPFILE
[ 34.082] Using O_TMPFILE
[ 34.082] Using O_TMPFILE
[ 34.083] Using O_TMPFILE
[ 34.083] Using O_TMPFILE
[ 34.084] Using O_TMPFILE
[ 34.085] Using O_TMPFILE
[ 34.139] Using O_TMPFILE
[ 34.139] Using O_TMPFILE
[ 34.140] Using O_TMPFILE
[ 34.140] Using O_TMPFILE
[ 34.140] Using O_TMPFILE
[ 34.141] Using O_TMPFILE
[ 34.141] Using O_TMPFILE
[ 34.141] Using O_TMPFILE
[ 34.142] Using O_TMPFILE
[ 34.142] Using O_TMPFILE
[ 34.142] Using O_TMPFILE
[ 34.142] Using O_TMPFILE
[ 34.143] Using O_TMPFILE
[ 34.143] Using O_TMPFILE
[ 34.143] Using O_TMPFILE
[ 34.143] Using O_TMPFILE
[ 34.144] Using O_TMPFILE
[ 34.144] Using O_TMPFILE
[ 34.490] Using O_TMPFILE
[ 34.490] Using O_TMPFILE
[ 34.491] Using O_TMPFILE
[ 34.491] Using O_TMPFILE
[ 34.491] Using O_TMPFILE
[ 34.491] Using O_TMPFILE
[ 34.492] Using O_TMPFILE
[ 34.492] Using O_TMPFILE
[ 34.493] Using O_TMPFILE
[ 34.517] Using O_TMPFILE
[ 34.517] Using O_TMPFILE
[ 36.732] Using O_TMPFILE
[ 36.732] Using O_TMPFILE
[ 36.737] Using O_TMPFILE
[ 36.737] Using O_TMPFILE
[ 36.830] Using O_TMPFILE
[ 36.830] Using O_TMPFILE
[ 39.126] Using O_TMPFILE
[ 39.126] Using O_TMPFILE
[ 70.365] Using O_TMPFILE
[ 70.366] Using O_TMPFILE
[ 70.760] Using O_TMPFILE
[ 70.761] Using O_TMPFILE[b]Co sie aktualizowało:[/b]
Kod:
Start-Date: 2018-05-09 15:59:52 Commandline: apt full-upgrade Install: linux-headers-4.16.0-1-amd64:amd64 (4.16.5-1, automatic), libncurses6:amd64 (6.1+20180210-2, automatic), libncurses6:i386 (6.1+20180210-2, automatic), libncursesw6:amd64 (6.1+20180210-2, automatic), libtinfo6:amd64 (6.1+20180210-2, automatic), libtinfo6:i386 (6.1+20180210-2, automatic), linux-image-4.16.0-1-amd64:amd64 (4.16.5-1, automatic), linux-headers-4.16.0-1-common:amd64 (4.16.5-1, automatic), linux-kbuild-4.16:amd64 (4.16.5-1, automatic) Upgrade: vlc-bin:amd64 (1:3.0.1-dmo2, 1:3.0.2-dmo2), libmpx2:amd64 (8-20180425-1, 8.1.0-1), libdjvulibre-text:amd64 (3.5.27.1-8, 3.5.27.1-9), vlc-plugin-video-output:amd64 (1:3.0.1-dmo2, 1:3.0.2-dmo2), libusb-1.0-0:amd64 (2:1.0.21-2, 2:1.0.22-2), dbus-x11:amd64 (1.12.6-2, 1.12.8-2), libaa1:amd64 (1.4p5-44+b1, 1.4p5-44+b2), mtr-tiny:amd64 (0.92-1, 0.92-1+b1), libvulkan1:amd64 (1.1.70+dfsg1-1, 1.1.73+dfsg-1), intel-microcode:amd64 (3.20180312.1, 3.20180425.1), libdbus-1-3:amd64 (1.12.6-2, 1.12.8-2), irqbalance:amd64 (1.3.0-0.1, 1.3.0-0.1+b1), w3m-img:amd64 (0.5.3-36, 0.5.3-36+b1), dialog:amd64 (1.3-20171209-1, 1.3-20171209-1+b1), ne:amd64 (3.0.1-2+b2, 3.0.1-2+b3), libquicktime2:amd64 (3:1.2.4-dmo22, 3:1.2.4-dmo23), sl:amd64 (3.03-17+b2, 3.03-17+b3), iftop:amd64 (1.0~pre4-4, 1.0~pre4-4+b1), vim-common:amd64 (2:8.0.1453-1, 2:8.0.1766-1), audacious-plugins-data:amd64 (1:3.9-dmo4, 1:3.9-dmo5), libcrystalhd3:amd64 (1:0.0~git20110715.fdd2f19-12, 1:0.0~git20110715.fdd2f19-13), libflac++6v5:amd64 (1.3.2-1, 1.3.2-2), libibverbs1:amd64 (17.1-1, 17.1-2), libopenal1:amd64 (1:1.18.2-2, 1:1.18.2-3), libatk-wrapper-java:amd64 (0.33.3-20, 0.33.3-21), lib32stdc++6:amd64 (8-20180425-1, 8.1.0-1), vlc-plugin-qt:amd64 (1:3.0.1-dmo2, 1:3.0.2-dmo2), ispell:amd64 (3.4.00-6, 3.4.00-6+b1), dbus:amd64 (1.12.6-2, 1.12.8-2), python2.7-minimal:amd64 (2.7.15~rc1-1, 2.7.15-1), gcc-8-base:amd64 (8-20180425-1, 8.1.0-1), gcc-8-base:i386 (8-20180425-1, 8.1.0-1), python-tk:amd64 (2.7.15~rc1-1, 2.7.15-1), slurm:amd64 (0.4.3-2+b2, 0.4.3-2+b3), libcdio18:amd64 (1:2.0.0-dmo1, 1:2.0.0-dmo2), bsdmainutils:amd64 (11.1.2, 11.1.2+b1), ncmpc:amd64 (1:0.27-dmo1, 1:0.27-dmo2), libgpg-error0:amd64 (1.29-4, 1.31-1), libgpg-error0:i386 (1.29-4, 1.31-1), zlib1g:amd64 (1:1.2.8.dfsg-5, 1:1.2.11.dfsg-1), zlib1g:i386 (1:1.2.8.dfsg-5, 1:1.2.11.dfsg-1), libitm1:amd64 (8-20180425-1, 8.1.0-1), vlc-l10n:amd64 (1:3.0.1-dmo2, 1:3.0.2-dmo2), at-spi2-core:amd64 (2.28.0-2, 2.28.0-3), ibverbs-providers:amd64 (17.1-1, 17.1-2), sudo:amd64 (1.8.21p2-3, 1.8.23-1), libpython2.7:amd64 (2.7.15~rc1-1, 2.7.15-1), libncurses5:amd64 (6.1-1, 6.1+20180210-2), libncurses5:i386 (6.1-1, 6.1+20180210-2), python2.7:amd64 (2.7.15~rc1-1, 2.7.15-1), nano:amd64 (2.9.5-1, 2.9.6-1), qemu-system-x86:amd64 (1:2.12~rc3+dfsg-2, 1:2.12+dfsg-1), libvlc5:amd64 (1:3.0.1-dmo2, 1:3.0.2-dmo2), ncdu:amd64 (1.13-1, 1.13-1+b1), procps:amd64 (2:3.3.14-1, 2:3.3.14-1+b1), zlib1g-dev:amd64 (1:1.2.8.dfsg-5, 1:1.2.11.dfsg-1), x11-xkb-utils:amd64 (7.7+3+b1, 7.7+4), librdmacm1:amd64 (17.1-1, 17.1-2), libquadmath0:amd64 (8-20180425-1, 8.1.0-1), iptraf-ng:amd64 (1:1.1.4-6, 1:1.1.4-6+b1), libwavpack1:amd64 (5.1.0-2, 5.1.0-3), libncursesw5:amd64 (6.1-1, 6.1+20180210-2), libprocps6:amd64 (2:3.3.14-1, 2:3.3.14-1+b1), libopenal-data:amd64 (1:1.18.2-2, 1:1.18.2-3), libvlccore9:amd64 (1:3.0.1-dmo2, 1:3.0.2-dmo2), deadbeef:amd64 (0.7.2-dmo5, 0.7.2-dmo6), libvlc-bin:amd64 (1:3.0.1-dmo2, 1:3.0.2-dmo2), htop:amd64 (2.1.0-3, 2.2.0-1), mpc:amd64 (1:0.29-dmo3, 1:0.30-dmo1), libatk-wrapper-java-jni:amd64 (0.33.3-20, 0.33.3-21), libgcc1:amd64 (1:8-20180425-1, 1:8.1.0-1), libgcc1:i386 (1:8-20180425-1, 1:8.1.0-1), libaspell15:amd64 (0.60.7~20110707-4, 0.60.7~20110707-4+b1), lib32gcc1:amd64 (1:8-20180425-1, 1:8.1.0-1), dpkg:amd64 (1.19.0.5, 1.19.0.5+b1), ccze:amd64 (0.2.1-4, 0.2.1-4+b1), libtsan0:amd64 (8-20180425-1, 8.1.0-1), psmisc:amd64 (23.1-1, 23.1-1+b1), libtinfo5:amd64 (6.1-1, 6.1+20180210-2), libtinfo5:i386 (6.1-1, 6.1+20180210-2), libcaca0:amd64 (0.99.beta19-2+b2, 0.99.beta19-2+b3), libatspi2.0-0:amd64 (2.28.0-2, 2.28.0-3), nmon:amd64 (16g+debian-4, 16g+debian-4+b1), talk:amd64 (0.17-15+b2, 0.17-15+b3), aptitude-common:amd64 (0.8.10-6, 0.8.10-9), libbabl-0.1-0:amd64 (1:0.1.46-dmo1, 1:0.1.46-dmo2), qemu-utils:amd64 (1:2.12~rc3+dfsg-2, 1:2.12+dfsg-1), pinentry-gtk2:amd64 (1.1.0-1, 1.1.0-1+b1), linux-image-amd64:amd64 (4.15+92, 4.16+93), youtube-dl:amd64 (2018.04.25-dmo1, 2018.05.01-dmo1), proftpd-doc:amd64 (1.3.6-1, 1.3.6-2), vim-runtime:amd64 (2:8.0.1453-1, 2:8.0.1766-1), mupdf:amd64 (1.12.0+ds1-1, 1.13.0+ds1-1), w3m:amd64 (0.5.3-36, 0.5.3-36+b1), vlc-plugin-access-extra:amd64 (1:3.0.1-dmo2, 1:3.0.2-dmo2), libnetfilter-conntrack3:amd64 (1.0.6-2, 1.0.7-1), irssi:amd64 (1.0.7-1, 1.0.7-1+b1), vim:amd64 (2:8.0.1453-1+b1, 2:8.0.1766-1), dvtm:amd64 (0.15-2, 0.15-2+b1), tty-clock:amd64 (2.3-1, 2.3-1+b1), vlc:amd64 (1:3.0.1-dmo2, 1:3.0.2-dmo2), spacefm-common:amd64 (1.0.5-2, 1.0.6-3), vlc-data:amd64 (1:3.0.1-dmo2, 1:3.0.2-dmo2), ncurses-term:amd64 (6.1-1, 6.1+20180210-2), python-pyicu:amd64 (1.9.5-1+b1, 2.0.3-1), linux-headers-amd64:amd64 (4.15+92, 4.16+93), liblsan0:amd64 (8-20180425-1, 8.1.0-1), nrss:amd64 (0.3.9-1+b2, 0.3.9-1+b3), libgomp1:amd64 (8-20180425-1, 8.1.0-1), mkvtoolnix:amd64 (22.0.0-1, 23.0.0-1), spacefm:amd64 (1.0.5-2, 1.0.6-3), gir1.2-atspi-2.0:amd64 (2.28.0-2, 2.28.0-3), cmatrix:amd64 (1.2a-5+b2, 1.2a-5+b3), xxd:amd64 (2:8.0.1453-1+b1, 2:8.0.1766-1), ncurses-bin:amd64 (6.1-1, 6.1+20180210-2), iproute2:amd64 (4.15.0-3, 4.16.0-2), aspell:amd64 (0.60.7~20110707-4, 0.60.7~20110707-4+b1), libreadline5:amd64 (5.2+dfsg-3+b1, 5.2+dfsg-3+b2), libcwidget3v5:amd64 (0.5.17-7, 0.5.17-10), zsh:amd64 (5.5.1-1, 5.5.1-1+b1), qemu-kvm:amd64 (1:2.12~rc3+dfsg-2, 1:2.12+dfsg-1), ncurses-base:amd64 (6.1-1, 6.1+20180210-2), libdjvulibre21:amd64 (3.5.27.1-8, 3.5.27.1-9), gstreamer1.0-libav:amd64 (1:1.14.0-dmo1, 1:1.14.0-dmo2), usbmuxd:amd64 (1.1.1~git20180302.b888970-0.1, 1.1.1~git20180428.b95a0a0-1), audacious-plugins:amd64 (1:3.9-dmo4, 1:3.9-dmo5), libflac8:amd64 (1.3.2-1, 1.3.2-2), cmake:amd64 (3.11.1-1, 3.11.1-1+b1), libpython2.7-minimal:amd64 (2.7.15~rc1-1, 2.7.15-1), libedit2:amd64 (3.1-20170329-1, 3.1-20170329-1+b1), libedit2:i386 (3.1-20170329-1, 3.1-20170329-1+b1), calcurse:amd64 (4.2.1-1.1, 4.2.1-1.1+b1), libzstd1:amd64 (1.3.3+dfsg-2, 1.3.4+dfsg-2), tmux:amd64 (2.7-1, 2.7-1+b1), qemu-system-arm:amd64 (1:2.12~rc3+dfsg-2, 1:2.12+dfsg-1), dbus-user-session:amd64 (1.12.6-2, 1.12.8-2), libatomic1:amd64 (8-20180425-1, 8.1.0-1), pinentry-qt:amd64 (1.1.0-1, 1.1.0-1+b1), libcc1-0:amd64 (8-20180425-1, 8.1.0-1), vlc-plugin-base:amd64 (1:3.0.1-dmo2, 1:3.0.2-dmo2), gettext-base:amd64 (0.19.8.1-6, 0.19.8.1-6+b1), gettext:amd64 (0.19.8.1-6, 0.19.8.1-6+b1), libpython2.7-stdlib:amd64 (2.7.15~rc1-1, 2.7.15-1), pinentry-gnome3:amd64 (1.1.0-1, 1.1.0-1+b1), libstdc++6:amd64 (8-20180425-1, 8.1.0-1), libstdc++6:i386 (8-20180425-1, 8.1.0-1), proftpd-basic:amd64 (1.3.6-1, 1.3.6-2), aptitude:amd64 (0.8.10-6, 0.8.10-9), poppler-data:amd64 (0.4.8-2, 0.4.9-2), install-info:amd64 (6.5.0.dfsg.1-2, 6.5.0.dfsg.1-2+b1), qemu-system-common:amd64 (1:2.12~rc3+dfsg-2, 1:2.12+dfsg-1), less:amd64 (487-0.1, 487-0.1+b1), xterm:amd64 (332-1, 332-1+b1), libiso9660-10:amd64 (1.0.0-2, 1.0.0-2+b1), tzdata:amd64 (2018d-1, 2018e-1), libcue2:amd64 (2.2.0-dmo1, 2.2.1-dmo1), libslang2:amd64 (2.3.2-1, 2.3.2-1+b1) End-Date: 2018-05-09 16:01:01
inxi
Kod:
Graphics: Card-1: Intel 4th Generation Core Processor Family Integrated Graphics driver: i915 v: kernel
Display: server: X.Org 1.19.6 driver: i915 resolution: 1920x1080~60Hz
OpenGL: renderer: Mesa DRI Intel Haswell v: 4.5 Mesa 17.3.9[b]
/etc/X11/xorg.conf [/b]- nie istnieje.
...
Ostatnio edytowany przez jacekz (2018-05-12 09:56:37)
Offline
#2 2018-05-12 10:46:38
arecki - Użytkownik
- arecki
- Użytkownik
- Skąd: 44 Bronson Lane Hensonville
- Zarejestrowany: 2016-03-03
Re: startx - z czym ma problem?
Wróżbita Maciej dodaje: to Debian w wersji testowej.
Być może przejściowe kłopoty i znikną przy kolejnej aktualizacji.
Offline
#3 2018-05-12 11:05:00
jacekz - Użytkownik
- jacekz
- Użytkownik
- Skąd: Lubuskie
- Zarejestrowany: 2013-01-20
Re: startx - z czym ma problem?
@arecki nigdy nie wierzyłem we wróżby Maćku
aczkolwiek jestem świadomy przejściowości niektórych problemów to wolałbym coś zaradzić
Kod:
System: Host: debian Kernel: 4.16.0-1-amd64 x86_64 bits: 64 Desktop: N/A Distro: Debian GNU/Linux buster/sid
Offline
#4 2018-05-19 11:54:47
hi - Użytkownik
- hi
- Użytkownik
- Zarejestrowany: 2016-03-24
Re: startx - z czym ma problem?
a coś nie działa? Panie wiesz ile dziennie mam śmieci w logu xorga, jakbym chciał to przeglądać to by mi życia nie starczyło :)zaradzać to będziesz jak coś się zepsuje w co i tak wątpię :)
"Jeśli wolność słowa w ogóle coś oznacza, to oznacza prawo do mówienia ludziom tego, czego nie chcą słyszeć."
Eric Arthur Blair
Offline
#5 2018-10-29 22:12:14
seler - Użytkownik
- seler
- Użytkownik
- Zarejestrowany: 2012-05-15
Re: startx - z czym ma problem?
Spróbuj po odpaleniu Xsów w trakcie tej zwiechy poruszać i poklikać myszką albo powciskać kilka(naście) razy klawisze shift alt. Jeżeli po tym ci wystartuje, to doinstaluj pakiet rng-tools5
a to feler westchnął seler
Offline
#6 2018-10-29 22:36:14
jacekz - Użytkownik
- jacekz
- Użytkownik
- Skąd: Lubuskie
- Zarejestrowany: 2013-01-20
Re: startx - z czym ma problem?
@seler
A skąd to?
Offline
#7 2018-10-29 23:31:41
seler - Użytkownik
- seler
- Użytkownik
- Zarejestrowany: 2012-05-15
Re: startx - z czym ma problem?
miałem właśnie problem na świeżej instalce Bustera z XFCE - zwiecha po uruchomieniu, po włączeniu w lightdm autologowania. Po ruszeniu myszką kilka razy odblokowywało się i uruchamiało. Zacząłem googlować i znalazłem temat na liście mailingowej debiana opisujący ten problem. Okazuje się, że podczas uruchamiania XFCE czekał aż jakiś kryptograficzny proces dostanie losowe dane, które debian bierze z m.in. czujników temperatury (bardzo powoli) czy ruchów myszą (nieco szybciej). Niby miało to być załatane, ale jakoś u mnie wciąż występowało. Lekarstwem na to okazał się w/w rng-tools5
temat na mailiscie:
https://groups.google.com/forum/#!searchin/linux.debian.user/lightdm|sort:date/linux.debian.user/nl7i9MZb3Gg/2uCmdO04CwAJ
Ostatnio edytowany przez seler (2018-10-30 18:42:41)
a to feler westchnął seler
Offline
#8 2018-10-30 15:57:24
jacekz - Użytkownik
- jacekz
- Użytkownik
- Skąd: Lubuskie
- Zarejestrowany: 2013-01-20
Re: startx - z czym ma problem?
@seler
Wielkie dzięki kolego.
Problem zniknął.
Ja szukałem bardziej w stronę problemów z X-sami lub sterownikami intela...
Offline
Informacje debugowania
| Time (s) | Query |
|---|---|
| 0.00009 | SET CHARSET latin2 |
| 0.00004 | SET NAMES latin2 |
| 0.00117 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.137.218.176' WHERE u.id=1 |
| 0.00066 | REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '3.137.218.176', 1733246259) |
| 0.00047 | SELECT * FROM punbb_online WHERE logged<1733245959 |
| 0.00040 | SELECT topic_id FROM punbb_posts WHERE id=319523 |
| 0.00005 | SELECT id FROM punbb_posts WHERE topic_id=30451 ORDER BY posted |
| 0.00031 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=30451 AND t.moved_to IS NULL |
| 0.00025 | SELECT search_for, replace_with FROM punbb_censoring |
| 0.00130 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=30451 ORDER BY p.id LIMIT 0,25 |
| 0.00079 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=30451 |
| Total query time: 0.00553 s | |