Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
Strony: 1
- Forum Debian Users Gang
- » Hardware
- » Problem z rozdzielczością przy zintegrowanej grafice INTEL G31
#1 2018-08-17 17:59:47
wlodarek1 - 
Użytkownik
Problem z rozdzielczością przy zintegrowanej grafice INTEL G31
Ze względu na problemy z kartą graficzną nvidia 8600 - połączyłem monitor kablem vga Ze
zintegrowaną z płytą główną grafiką INTYEL G3100
Windowsowy menedżer urządzeń rozpoznał poprawnie nowy układ , zainstalował z automatu stery dla tegop intela
i jest prawidłowa rozdzielczość 1680 x 1050 .
Na linuksie Sparky jest gorzej ; zintegrowana grafika intela jest obsługiwana przez moduły jądra ; i 915 , nouveau .
Ale graficzne narzędzie do konfigurowania ekranu nie pozwala ustawić prawidłowej rozdzielczości 1680 x 1050 .
Można ustawić tylko mniejsze rozdzielczoci .
Co by trzeba doinstalować , albo ręcznie skonfigurować aby na linuksie również mieć prawidłową rozdziałkę 1680 x 1050
z góry dzięki za pomoc .
System operacyjny ma być dla ludzi, a nie ludzie dla systemu operacyjnego.
Offline
#2 2018-08-17 18:35:48
Jacekalex - Podobno człowiek...;)
- Jacekalex
- Podobno człowiek...;)
- Skąd: /dev/urandom
- Zarejestrowany: 2008-01-07
Re: Problem z rozdzielczością przy zintegrowanej grafice INTEL G31
Problemy z Nvidia 8600?
Zazwyczaj dotyczą wybrania odpowiedniego sterownika (w przypadku Xorga).
Używasz na Debianie Xorga czy Waylanda?
Pokaż wynik:
Kod:
env |grep XDG_SESSION_TYPE
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)
Offline
#3 2018-08-17 19:02:42
wlodarek1 - Użytkownik
Re: Problem z rozdzielczością przy zintegrowanej grafice INTEL G31
Problem z tą grafiką dotyczy zarówno linuksa jak i windows
Dlatego pytam jak ustawić prawidłową rozdzielczość dla grafiki intela
System operacyjny ma być dla ludzi, a nie ludzie dla systemu operacyjnego.
Offline
#4 2018-08-17 19:59:01
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: Problem z rozdzielczością przy zintegrowanej grafice INTEL G31
[quote=wlodarek1]połączyłem monitor kablem vga[/quote]
Chyba to jest źródło twojego problemu.
Poszukaj pod hasłem „EDID”.
Offline
#5 2018-08-18 09:57:45
wlodarek1 - Użytkownik
Re: Problem z rozdzielczością przy zintegrowanej grafice INTEL G31
A jednak płatne windows radzi sobie ze zintegrowaną grafiką intela .
DElaczego linuksy nie mogą ?!
Tego posta piszę z poziomu uruchomioneo "live" ubuntu 18.04 i tu jest niestety ten sam problem ;\
[url=https://naforum.zapodaj.net/3d354f26379e.png.html][img]https://naforum.zapodaj.net/thumbs/3d354f26379e.png[/img][/url]
.....
System operacyjny ma być dla ludzi, a nie ludzie dla systemu operacyjnego.
Offline
#6 2018-08-18 10:41:11
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: Problem z rozdzielczością przy zintegrowanej grafice INTEL G31
[quote=wlodarek1]A jednak płatne windows radzi sobie ze zintegrowaną grafiką intela .
DElaczego linuksy nie mogą ?![/quote]
Jakoś mogą bo nigdy nie miałem takiego problemu.
Może źródło problemu znajduje się przed monitorem?
A tak bardziej serio, sprawdzałeś to co ci podpowiedziałem wcześniej?
A zamiast bezsensownych obrazków zapodaj jakieś logi bo bez tego to nie ma w ogóle o czym dyskutować.
zintegrowana grafika intela jest obsługiwana przez moduły jądra ; i 915 , nouveau[/quote]
To tez bez sensu bo to nieodpowiednie sterowniki.
Zasadniczo wygląda to na niezły burdel w systemie.
Offline
#7 2018-08-18 12:10:18
urbinek - Użytkownik
Re: Problem z rozdzielczością przy zintegrowanej grafice INTEL G31
[quote=wlodarek1]Problem z tą grafiką dotyczy zarówno linuksa jak i windows[/quote]
[quote=wlodarek1]A jednak płatne windows radzi sobie ze zintegrowaną grafiką intela[/quote]
?
Daj wynik dmesg, lspci, lsmod
A w wolnym czasie, robię noże :)
[img]http://nginx.urbinek.eu/_photos/signature.png[/img]
Offline
#8 2018-08-18 14:26:18
wlodarek1 - Użytkownik
Re: Problem z rozdzielczością przy zintegrowanej grafice INTEL G31
darek@gameover:~$ lsmod
Module Size Used by
fuse 98304 3
ctr 16384 6
ccm 20480 3
snd_usb_audio 180224 1
snd_usbmidi_lib 28672 1 snd_usb_audio
snd_rawmidi 32768 1 snd_usbmidi_lib
snd_seq_device 16384 1 snd_rawmidi
iTCO_wdt 16384 0
arc4 16384 2
iTCO_vendor_support 16384 1 iTCO_wdt
rtl8192cu 65536 0
rtl_usb 20480 1 rtl8192cu
rtl8192c_common 49152 1 rtl8192cu
rtlwifi 77824 3 rtl_usb,rtl8192c_common,rtl8192cu
mac80211 651264 3 rtl_usb,rtlwifi,rtl8192cu
cfg80211 573440 2 mac80211,rtlwifi
rfkill 24576 3 cfg80211
gspca_ov519 49152 0
gspca_main 32768 1 gspca_ov519
v4l2_common 16384 1 gspca_main
videodev 176128 3 v4l2_common,gspca_ov519,gspca_main
media 40960 1 videodev
dvb_pll 16384 1
stv0299 20480 1
coretemp 16384 0
kvm_intel 188416 0
b2c2_flexcop_pci 16384 0
i2c_i801 24576 0
b2c2_flexcop 32768 1 b2c2_flexcop_pci
s5h1420 20480 1 b2c2_flexcop
lpc_ich 24576 0
cx24113 20480 1 b2c2_flexcop
kvm 585728 1 kvm_intel
mfd_core 16384 1 lpc_ich
cx24123 20480 1 b2c2_flexcop
dvb_core 122880 2 b2c2_flexcop,stv0299
i2c_smbus 16384 1 i2c_i801
pcspkr 16384 0
sg 32768 0
irqbypass 16384 1 kvm
serio_raw 16384 0
rng_core 16384 0
shpchp 36864 0
evdev 24576 15
snd_hda_codec_realtek 86016 1
snd_hda_codec_generic 69632 1 snd_hda_codec_realtek
snd_hda_intel 36864 3
snd_hda_codec 131072 3 snd_hda_intel,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hda_core 81920 4 snd_hda_intel,snd_hda_codec,snd_hda_codec_generic,snd_hda_codec_realtek
snd_hwdep 16384 2 snd_hda_codec,snd_usb_audio
snd_pcm 110592 4 snd_hda_intel,snd_hda_codec,snd_usb_audio,snd_hda_core
acpi_cpufreq 20480 0
snd_timer 32768 1 snd_pcm
snd 86016 19 snd_hda_intel,snd_hwdep,snd_hda_codec,snd_usb_audio,snd_timer,snd_rawmidi,snd_hda_codec_generic,snd_usbmidi_lib,snd_seq_device,snd_hda_codec_realtek,snd_pcm
soundcore 16384 1 snd
tpm_tis 16384 0
tpm_tis_core 20480 1 tpm_tis
tpm 45056 2 tpm_tis,tpm_tis_core
loop 28672 0
parport_pc 28672 1
sunrpc 335872 1
ppdev 20480 0
lp 20480 0
parport 49152 3 lp,parport_pc,ppdev
ip_tables 24576 0
x_tables 36864 1 ip_tables
autofs4 40960 2
ext4 581632 1
crc16 16384 1 ext4
jbd2 106496 1 ext4
crc32c_generic 16384 2
fscrypto 28672 1 ext4
ecb 16384 0
glue_helper 16384 0
lrw 16384 0
gf128mul 16384 1 lrw
ablk_helper 16384 0
cryptd 24576 1 ablk_helper
aes_x86_64 20480 7
mbcache 16384 2 ext4
sd_mod 45056 3
sr_mod 24576 0
cdrom 61440 1 sr_mod
uas 24576 0
ata_generic 16384 0
usb_storage 69632 5 uas
ata_piix 36864 2
libata 249856 2 ata_piix,ata_generic
nouveau 1544192 1
scsi_mod 225280 6 sd_mod,usb_storage,libata,uas,sr_mod,sg
i915 1282048 3
ehci_pci 16384 0
psmouse 135168 0
uhci_hcd 45056 0
ehci_hcd 81920 1 ehci_pci
mxm_wmi 16384 1 nouveau
wmi 16384 2 mxm_wmi,nouveau
ttm 98304 1 nouveau
usbcore 249856 11 snd_usb_audio,usb_storage,ehci_hcd,uhci_hcd,rtl_usb,gspca_ov519,snd_usbmidi_lib,uas,rtl8192cu,gspca_main,ehci_pci
video 40960 2 nouveau,i915
i2c_algo_bit 16384 2 nouveau,i915
drm_kms_helper 155648 2 nouveau,i915
usb_common 16384 1 usbcore
r8169 81920 0
drm 360448 8 nouveau,i915,ttm,drm_kms_helper
mii 16384 1 r8169
button 16384 2 nouveau,i915
fjes 28672 0
darek@gameover:~$[/quote]darek@gameover:~$ lspci
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 10)
00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 01)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)
01:00.0 VGA compatible controller: NVIDIA Corporation G84 [GeForce 8600 GT] (rev a1)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 02)
04:01.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / Technisat SkyStar2 DVB card (rev 02)
darek@gameover:~$[/quote]Kod:
[ 0.000000] microcode: microcode updated early to revision 0xba, date = 2010-10-03 [ 0.000000] Linux version 4.8.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.4.1 20161019 (Debian 5.4.1-3) ) #1 SMP Debian 4.8.7-1 (2016-11-13) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-1-amd64 root=UUID=d58d42ff-cff7-4b75-8d71-b29c2b0e09fc ro quiet splash [ 0.000000] x86/fpu: Legacy x87 FPU detected. [ 0.000000] x86/fpu: Using 'eager' FPU context switches. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f5dffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007f5e0000-0x000000007f5e2fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007f5e3000-0x000000007f5effff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007f5f0000-0x000000007f5fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b0000000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.4 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. G31M-S2L/G31M-S2L, BIOS F10d 02/04/2009 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x7f5e0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CAFFF write-protect [ 0.000000] CB000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07F800000 mask FFF800000 uncachable [ 0.000000] 2 base 07F700000 mask FFFF00000 uncachable [ 0.000000] 3 base 07F600000 mask FFFF00000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] found SMP MP-table at [mem 0x000f5200-0x000f520f] mapped at [ffff92bfc00f5200] [ 0.000000] Base memory trampoline at [ffff92bfc0099000] 99000 size 24576 [ 0.000000] BRK [0x3814c000, 0x3814cfff] PGTABLE [ 0.000000] BRK [0x3814d000, 0x3814dfff] PGTABLE [ 0.000000] BRK [0x3814e000, 0x3814efff] PGTABLE [ 0.000000] BRK [0x3814f000, 0x3814ffff] PGTABLE [ 0.000000] BRK [0x38150000, 0x38150fff] PGTABLE [ 0.000000] BRK [0x38151000, 0x38151fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x33537000-0x35a92fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F6BF0 000014 (v00 GBT ) [ 0.000000] ACPI: RSDT 0x000000007F5E3040 000038 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: FACP 0x000000007F5E30C0 000074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: DSDT 0x000000007F5E3180 0040E8 (v01 GBT GBTUACPI 00001000 MSFT 0100000C) [ 0.000000] ACPI: FACS 0x000000007F5E0000 000040 [ 0.000000] ACPI: HPET 0x000000007F5E73C0 000038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) [ 0.000000] ACPI: MCFG 0x000000007F5E7440 00003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: APIC 0x000000007F5E72C0 000084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) [ 0.000000] ACPI: SSDT 0x000000007F5E7DA0 0003AB (v01 PmRef CpuPm 00003000 INTL 20040311) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007f5dffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x7f5db000-0x7f5dffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007f5dffff] [ 0.000000] Normal empty [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000007f5dffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007f5dffff] [ 0.000000] On node 0 totalpages: 521598 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 8088 pages used for memmap [ 0.000000] DMA32 zone: 517600 pages, LIFO batch:31 [ 0.000000] Reserving Intel graphics memory at 0x000000007f800000-0x000000007fffffff [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff] [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff] [ 0.000000] e820: [mem 0xc0000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 35 pages/cpu @ffff92c03f200000 s103384 r8192 d31784 u524288 [ 0.000000] pcpu-alloc: s103384 r8192 d31784 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 513425 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.8.0-1-amd64 root=UUID=d58d42ff-cff7-4b75-8d71-b29c2b0e09fc ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 2000792K/2086392K available (6097K kernel code, 1165K rwdata, 2828K rodata, 1372K init, 800K bss, 85600K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:33024 nr_irqs:456 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2400.001 MHz processor [ 0.004015] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=9600004) [ 0.004018] pid_max: default: 32768 minimum: 301 [ 0.004046] ACPI: Core revision 20160422 [ 0.010666] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.010745] Security Framework initialized [ 0.010747] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.010757] AppArmor: AppArmor disabled by boot time parameter [ 0.010907] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.012260] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.013039] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.013044] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes) [ 0.013510] CPU: Physical Processor ID: 0 [ 0.013511] CPU: Processor Core ID: 0 [ 0.013513] mce: CPU supports 6 MCE banks [ 0.013522] CPU0: Thermal monitoring enabled (TM2) [ 0.013528] process: using mwait in idle threads [ 0.013534] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4 [ 0.013535] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0 [ 0.013925] Freeing SMP alternatives memory: 24K (ffffffffab47c000 - ffffffffab482000) [ 0.018710] ftrace: allocating 24996 entries in 98 pages [ 0.024117] smpboot: APIC(0) Converting physical 0 to logical package 0 [ 0.024118] smpboot: Max logical packages: 1 [ 0.024495] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.064000] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (family: 0x6, model: 0xf, stepping: 0xb) [ 0.064000] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver. [ 0.064000] core: PEBS disabled due to CPU errata [ 0.064000] ... version: 2 [ 0.064000] ... bit width: 40 [ 0.064000] ... generic registers: 2 [ 0.064000] ... value mask: 000000ffffffffff [ 0.064000] ... max period: 000000007fffffff [ 0.064000] ... fixed-purpose events: 3 [ 0.064000] ... event mask: 0000000700000003 [ 0.064000] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.064000] x86: Booting SMP configuration: [ 0.064000] .... node #0, CPUs: #1 #2 #3 [ 0.318030] x86: Booted up 1 node, 4 CPUs [ 0.318030] smpboot: Total of 4 processors activated (19199.97 BogoMIPS) [ 0.320320] devtmpfs: initialized [ 0.320320] x86/mm: Memory block size: 128MB [ 0.324040] PM: Registering ACPI NVS region [mem 0x7f5e0000-0x7f5e2fff] (12288 bytes) [ 0.324135] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.324217] pinctrl core: initialized pinctrl subsystem [ 0.324394] NET: Registered protocol family 16 [ 0.340007] cpuidle: using governor ladder [ 0.356017] cpuidle: using governor menu [ 0.356094] ACPI: bus type PCI registered [ 0.356097] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.356245] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.356247] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820 [ 0.356265] PCI: Using configuration type 1 for base access [ 0.356294] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.356294] mtrr: probably your BIOS does not setup all CPUs. [ 0.356294] mtrr: corrected configuration. [ 0.372067] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.372103] ACPI: Added _OSI(Module Device) [ 0.372104] ACPI: Added _OSI(Processor Device) [ 0.372105] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.372106] ACPI: Added _OSI(Processor Aggregator Device) [ 0.376295] ACPI: Dynamic OEM Table Load: [ 0.376303] ACPI: SSDT 0xFFFF92C03C2F9C00 00022A (v01 PmRef Cpu0Ist 00003000 INTL 20040311) [ 0.376595] ACPI: Dynamic OEM Table Load: [ 0.376599] ACPI: SSDT 0xFFFF92C03C2FCA00 000152 (v01 PmRef Cpu1Ist 00003000 INTL 20040311) [ 0.376860] ACPI: Dynamic OEM Table Load: [ 0.376864] ACPI: SSDT 0xFFFF92C03C2FCE00 000152 (v01 PmRef Cpu2Ist 00003000 INTL 20040311) [ 0.377128] ACPI: Dynamic OEM Table Load: [ 0.377132] ACPI: SSDT 0xFFFF92C03C8A2200 000152 (v01 PmRef Cpu3Ist 00003000 INTL 20040311) [ 0.377552] ACPI: Interpreter enabled [ 0.377573] ACPI: (supports S0 S3 S4 S5) [ 0.377575] ACPI: Using IOAPIC for interrupt routing [ 0.377608] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.383091] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.383096] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.383101] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.383346] PCI host bridge to bus 0000:00 [ 0.383349] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.383350] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.383352] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.383353] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.383355] pci_bus 0000:00: root bus resource [mem 0x7f600000-0xfebfffff window] [ 0.383357] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.383366] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000 [ 0.383482] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400 [ 0.383520] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.383608] pci 0000:00:02.0: [8086:29c2] type 00 class 0x030000 [ 0.383616] pci 0000:00:02.0: reg 0x10: [mem 0xe5300000-0xe537ffff] [ 0.383621] pci 0000:00:02.0: reg 0x14: [io 0xe400-0xe407] [ 0.383626] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff pref] [ 0.383630] pci 0000:00:02.0: reg 0x1c: [mem 0xe5000000-0xe50fffff] [ 0.383764] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300 [ 0.383778] pci 0000:00:1b.0: reg 0x10: [mem 0xe5380000-0xe5383fff 64bit] [ 0.383842] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.383894] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.383947] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400 [ 0.384025] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.384081] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.384136] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400 [ 0.384199] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.384250] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.384317] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300 [ 0.384352] pci 0000:00:1d.0: reg 0x20: [io 0xe000-0xe01f] [ 0.384420] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.384470] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300 [ 0.384516] pci 0000:00:1d.1: reg 0x20: [io 0xe100-0xe11f] [ 0.384581] pci 0000:00:1d.1: System wakeup disabled by ACPI [ 0.384630] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300 [ 0.384665] pci 0000:00:1d.2: reg 0x20: [io 0xe200-0xe21f] [ 0.384730] pci 0000:00:1d.2: System wakeup disabled by ACPI [ 0.384782] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300 [ 0.384816] pci 0000:00:1d.3: reg 0x20: [io 0xe300-0xe31f] [ 0.384882] pci 0000:00:1d.3: System wakeup disabled by ACPI [ 0.384936] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320 [ 0.384950] pci 0000:00:1d.7: reg 0x10: [mem 0xe5384000-0xe53843ff] [ 0.385059] pci 0000:00:1d.7: System wakeup disabled by ACPI [ 0.385111] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 [ 0.385196] pci 0000:00:1e.0: System wakeup disabled by ACPI [ 0.385251] pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100 [ 0.385323] pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO [ 0.385327] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO [ 0.385330] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f) [ 0.385333] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f) [ 0.385441] pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a [ 0.385452] pci 0000:00:1f.1: reg 0x10: [io 0x0000-0x0007] [ 0.385460] pci 0000:00:1f.1: reg 0x14: [io 0x0000-0x0003] [ 0.385468] pci 0000:00:1f.1: reg 0x18: [io 0x0000-0x0007] [ 0.385475] pci 0000:00:1f.1: reg 0x1c: [io 0x0000-0x0003] [ 0.385483] pci 0000:00:1f.1: reg 0x20: [io 0xf000-0xf00f] [ 0.385500] pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.385501] pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.385502] pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.385504] pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.385596] pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f [ 0.385607] pci 0000:00:1f.2: reg 0x10: [io 0xe900-0xe907] [ 0.385613] pci 0000:00:1f.2: reg 0x14: [io 0xea00-0xea03] [ 0.385620] pci 0000:00:1f.2: reg 0x18: [io 0xeb00-0xeb07] [ 0.385627] pci 0000:00:1f.2: reg 0x1c: [io 0xec00-0xec03] [ 0.385633] pci 0000:00:1f.2: reg 0x20: [io 0xed00-0xed0f] [ 0.385666] pci 0000:00:1f.2: PME# supported from D3hot [ 0.385758] pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500 [ 0.385803] pci 0000:00:1f.3: reg 0x20: [io 0x0500-0x051f] [ 0.385955] pci 0000:01:00.0: [10de:0402] type 00 class 0x030000 [ 0.385964] pci 0000:01:00.0: reg 0x10: [mem 0xe2000000-0xe2ffffff] [ 0.385972] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.385980] pci 0000:01:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit] [ 0.385985] pci 0000:01:00.0: reg 0x24: [io 0xb000-0xb07f] [ 0.385990] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.386080] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.386083] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.386085] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe3ffffff] [ 0.386089] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.386135] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.386138] pci 0000:00:1c.0: bridge window [io 0xa000-0xafff] [ 0.386206] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.386223] pci 0000:03:00.0: reg 0x10: [io 0xc000-0xc0ff] [ 0.386249] pci 0000:03:00.0: reg 0x18: [mem 0xe5110000-0xe5110fff 64bit pref] [ 0.386265] pci 0000:03:00.0: reg 0x20: [mem 0xe5100000-0xe510ffff 64bit pref] [ 0.386276] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.386349] pci 0000:03:00.0: supports D1 D2 [ 0.386350] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.400022] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.400026] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 0.400030] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe4ffffff] [ 0.400036] pci 0000:00:1c.1: bridge window [mem 0xe5100000-0xe51fffff 64bit pref] [ 0.400100] pci 0000:04:01.0: [13d0:2103] type 00 class 0x028000 [ 0.400115] pci 0000:04:01.0: reg 0x10: [mem 0xe5200000-0xe520ffff] [ 0.400125] pci 0000:04:01.0: reg 0x14: [io 0xd000-0xd01f] [ 0.400266] pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode) [ 0.400269] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 0.400272] pci 0000:00:1e.0: bridge window [mem 0xe5200000-0xe52fffff] [ 0.400277] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode) [ 0.400279] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 0.400281] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode) [ 0.400282] pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode) [ 0.400284] pci 0000:00:1e.0: bridge window [mem 0x7f600000-0xfebfffff window] (subtractive decode) [ 0.400929] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.400992] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.401053] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.401114] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.401175] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.401237] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.401298] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.401359] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.401476] ACPI: Enabled 1 GPEs in block 00 to 1F [ 0.401596] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.401596] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.401596] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 0.401596] vgaarb: loaded [ 0.401596] vgaarb: bridge control possible 0000:01:00.0 [ 0.401596] vgaarb: no bridge control possible 0000:00:02.0 [ 0.401596] PCI: Using ACPI for IRQ routing [ 0.407046] PCI: pci_cache_line_size set to 64 bytes [ 0.407090] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] [ 0.407091] e820: reserve RAM buffer [mem 0x7f5e0000-0x7fffffff] [ 0.408087] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.408091] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.408095] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.410117] clocksource: Switched to clocksource hpet [ 0.418357] VFS: Disk quotas dquot_6.6.0 [ 0.418416] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.418573] pnp: PnP ACPI init [ 0.418810] system 00:00: [io 0x04d0-0x04d1] has been reserved [ 0.418812] system 00:00: [io 0x0290-0x029f] has been reserved [ 0.418814] system 00:00: [io 0x0800-0x087f] has been reserved [ 0.418816] system 00:00: [io 0x0290-0x0294] has been reserved [ 0.418818] system 00:00: [io 0x0880-0x088f] has been reserved [ 0.418822] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.418917] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.419217] pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.419438] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.419560] pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.419609] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.419682] system 00:06: [io 0x0400-0x04cf] could not be reserved [ 0.419685] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.419915] system 00:07: [mem 0xb0000000-0xbfffffff] has been reserved [ 0.419918] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.420137] system 00:08: [mem 0x000cd000-0x000cffff] has been reserved [ 0.420139] system 00:08: [mem 0x000f0000-0x000f7fff] could not be reserved [ 0.420141] system 00:08: [mem 0x000f8000-0x000fbfff] could not be reserved [ 0.420143] system 00:08: [mem 0x000fc000-0x000fffff] could not be reserved [ 0.420145] system 00:08: [mem 0x7f5e0000-0x7f5fffff] could not be reserved [ 0.420147] system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.420148] system 00:08: [mem 0x00100000-0x7f5dffff] could not be reserved [ 0.420150] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.420152] system 00:08: [mem 0xfed13000-0xfed1dfff] has been reserved [ 0.420154] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved [ 0.420156] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.420158] system 00:08: [mem 0xffb00000-0xffb7ffff] has been reserved [ 0.420160] system 00:08: [mem 0xfff00000-0xffffffff] has been reserved [ 0.420162] system 00:08: [mem 0x000e0000-0x000effff] has been reserved [ 0.420165] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.420171] pnp: PnP ACPI: found 9 devices [ 0.427136] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.427157] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.427159] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000 [ 0.427176] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.427178] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000 [ 0.427180] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.427182] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000 [ 0.427189] pci 0000:00:1c.0: BAR 14: assigned [mem 0x7f600000-0x7f7fffff] [ 0.427193] pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref] [ 0.427196] pci 0000:01:00.0: BAR 6: assigned [mem 0xe3000000-0xe301ffff pref] [ 0.427199] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.427201] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff] [ 0.427204] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe3ffffff] [ 0.427206] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.427210] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.427212] pci 0000:00:1c.0: bridge window [io 0xa000-0xafff] [ 0.427215] pci 0000:00:1c.0: bridge window [mem 0x7f600000-0x7f7fffff] [ 0.427218] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref] [ 0.427224] pci 0000:03:00.0: BAR 6: assigned [mem 0xe4000000-0xe400ffff pref] [ 0.427226] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.427228] pci 0000:00:1c.1: bridge window [io 0xc000-0xcfff] [ 0.427232] pci 0000:00:1c.1: bridge window [mem 0xe4000000-0xe4ffffff] [ 0.427235] pci 0000:00:1c.1: bridge window [mem 0xe5100000-0xe51fffff 64bit pref] [ 0.427240] pci 0000:00:1e.0: PCI bridge to [bus 04] [ 0.427242] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 0.427246] pci 0000:00:1e.0: bridge window [mem 0xe5200000-0xe52fffff] [ 0.427253] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.427255] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.427256] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.427258] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.427259] pci_bus 0000:00: resource 8 [mem 0x7f600000-0xfebfffff window] [ 0.427261] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] [ 0.427262] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe3ffffff] [ 0.427264] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.427265] pci_bus 0000:02: resource 0 [io 0xa000-0xafff] [ 0.427267] pci_bus 0000:02: resource 1 [mem 0x7f600000-0x7f7fffff] [ 0.427268] pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref] [ 0.427270] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff] [ 0.427271] pci_bus 0000:03: resource 1 [mem 0xe4000000-0xe4ffffff] [ 0.427273] pci_bus 0000:03: resource 2 [mem 0xe5100000-0xe51fffff 64bit pref] [ 0.427274] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.427276] pci_bus 0000:04: resource 1 [mem 0xe5200000-0xe52fffff] [ 0.427277] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7 window] [ 0.427279] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff window] [ 0.427280] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.427282] pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff window] [ 0.427283] pci_bus 0000:04: resource 8 [mem 0x7f600000-0xfebfffff window] [ 0.427385] NET: Registered protocol family 2 [ 0.427635] TCP established hash table entries: 16384 (order: 5, 131072 bytes) [ 0.427725] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 0.427873] TCP: Hash tables configured (established 16384 bind 16384) [ 0.427931] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.427954] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.428035] NET: Registered protocol family 1 [ 0.428056] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.428754] PCI: CLS 32 bytes, default 64 [ 0.428812] Unpacking initramfs... [ 1.102248] Freeing initrd memory: 38256K (ffff92bff3537000 - ffff92bff5a93000) [ 1.103029] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 1.103111] audit: initializing netlink subsys (disabled) [ 1.103149] audit: type=2000 audit(1534594775.100:1): initialized [ 1.103573] Initialise system trusted keyrings [ 1.103742] workingset: timestamp_bits=40 max_order=19 bucket_order=0 [ 1.103759] zbud: loaded [ 1.163010] Key type asymmetric registered [ 1.163012] Asymmetric key parser 'x509' registered [ 1.163047] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251) [ 1.163103] io scheduler noop registered [ 1.163104] io scheduler deadline registered [ 1.163117] io scheduler cfq registered (default) [ 1.163697] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.163704] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.163722] intel_idle: does not run on family 6 model 15 [ 1.164150] GHES: HEST is not enabled! [ 1.164257] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.184682] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.185389] Linux agpgart interface v0.103 [ 1.185505] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> [ 1.185506] AMD IOMMUv2 functionality not available on this system [ 1.185922] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.186314] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.186321] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.186570] mousedev: PS/2 mouse device common for all mice [ 1.186637] rtc_cmos 00:01: RTC can wake from S4 [ 1.186793] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 1.186819] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.186894] ledtrig-cpu: registered to indicate activity on CPUs [ 1.187425] NET: Registered protocol family 10 [ 1.187729] mip6: Mobile IPv6 [ 1.187731] NET: Registered protocol family 17 [ 1.187734] mpls_gso: MPLS GSO support [ 1.188036] microcode: sig=0x6fb, pf=0x10, revision=0xba [ 1.188129] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 1.188363] registered taskstats version 1 [ 1.188366] Loading compiled-in X.509 certificates [ 1.190664] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256)) [ 1.191112] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630' [ 1.191134] zswap: loaded using pool lzo/zbud [ 1.191602] rtc_cmos 00:01: setting system clock to 2018-08-18 12:19:36 UTC (1534594776) [ 1.191662] PM: Hibernation image not present or could not be loaded. [ 1.193140] Freeing unused kernel memory: 1372K (ffffffffab325000 - ffffffffab47c000) [ 1.193142] Write protecting the kernel read-only data: 10240k [ 1.193332] Freeing unused kernel memory: 32K (ffff92bff79f8000 - ffff92bff7a00000) [ 1.196917] Freeing unused kernel memory: 1268K (ffff92bff7cc3000 - ffff92bff7e00000) [ 1.204924] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 1.221628] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.221729] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.221740] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.222302] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.222645] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.222692] random: udevadm: uninitialized urandom read (16 bytes read) [ 1.222738] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.222751] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.222778] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.222785] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.222795] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 1.247057] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED [ 1.247600] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 1.247609] ACPI: Power Button [PWRB] [ 1.247703] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 1.247705] ACPI: Power Button [PWRF] [ 1.264314] [drm] Initialized drm 1.1.0 20060810 [ 1.264380] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.264402] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.264945] r8169 0000:03:00.0 eth0: RTL8168c/8111c at 0xffffbfd4c03ac000, 00:1f:d0:07:33:86, XID 1c4000c0 IRQ 27 [ 1.264947] r8169 0000:03:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko] [ 1.277372] wmi: Mapper loaded [ 1.282076] ACPI: bus type USB registered [ 1.282114] usbcore: registered new interface driver usbfs [ 1.282130] usbcore: registered new interface driver hub [ 1.282172] usbcore: registered new device driver usb [ 1.284378] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.285640] uhci_hcd: USB Universal Host Controller Interface driver [ 1.285832] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.285841] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 1.285849] uhci_hcd 0000:00:1d.0: detected 2 ports [ 1.285892] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e000 [ 1.285976] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.285978] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.285979] usb usb1: Product: UHCI Host Controller [ 1.285981] usb usb1: Manufacturer: Linux 4.8.0-1-amd64 uhci_hcd [ 1.285982] usb usb1: SerialNumber: 0000:00:1d.0 [ 1.286151] hub 1-0:1.0: USB hub found [ 1.286159] hub 1-0:1.0: 2 ports detected [ 1.286370] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.286376] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 1.286383] uhci_hcd 0000:00:1d.1: detected 2 ports [ 1.286407] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e100 [ 1.286456] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.286458] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.286459] usb usb2: Product: UHCI Host Controller [ 1.286461] usb usb2: Manufacturer: Linux 4.8.0-1-amd64 uhci_hcd [ 1.286462] usb usb2: SerialNumber: 0000:00:1d.1 [ 1.286598] hub 2-0:1.0: USB hub found [ 1.286606] hub 2-0:1.0: 2 ports detected [ 1.286799] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.286805] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 1.286811] uhci_hcd 0000:00:1d.2: detected 2 ports [ 1.286835] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e200 [ 1.286886] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.286887] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.286889] usb usb3: Product: UHCI Host Controller [ 1.286890] usb usb3: Manufacturer: Linux 4.8.0-1-amd64 uhci_hcd [ 1.286892] usb usb3: SerialNumber: 0000:00:1d.2 [ 1.287035] hub 3-0:1.0: USB hub found [ 1.287041] hub 3-0:1.0: 2 ports detected [ 1.287225] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.287230] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 1.287236] uhci_hcd 0000:00:1d.3: detected 2 ports [ 1.287261] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e300 [ 1.287311] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.287313] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.287315] usb usb4: Product: UHCI Host Controller [ 1.287316] usb usb4: Manufacturer: Linux 4.8.0-1-amd64 uhci_hcd [ 1.287318] usb usb4: SerialNumber: 0000:00:1d.3 [ 1.287451] hub 4-0:1.0: USB hub found [ 1.287458] hub 4-0:1.0: 2 ports detected [ 1.291102] ehci-pci: EHCI PCI platform driver [ 1.291805] ehci-pci 0000:00:1d.7: EHCI Host Controller [ 1.291813] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 1.295747] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported [ 1.295754] ehci-pci 0000:00:1d.7: irq 23, io mem 0xe5384000 [ 1.303883] SCSI subsystem initialized [ 1.308274] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.308415] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.308417] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.308419] usb usb5: Product: EHCI Host Controller [ 1.308420] usb usb5: Manufacturer: Linux 4.8.0-1-amd64 ehci_hcd [ 1.308422] usb usb5: SerialNumber: 0000:00:1d.7 [ 1.308632] hub 5-0:1.0: USB hub found [ 1.308640] hub 5-0:1.0: 8 ports detected [ 1.309264] nouveau 0000:01:00.0: enabling device (0000 -> 0003) [ 1.309580] nouveau 0000:01:00.0: NVIDIA G84 (084200a2) [ 1.311282] libata version 3.00 loaded. [ 1.340124] hub 1-0:1.0: USB hub found [ 1.340133] hub 1-0:1.0: 2 ports detected [ 1.372084] hub 2-0:1.0: USB hub found [ 1.372091] hub 2-0:1.0: 2 ports detected [ 1.400250] hub 3-0:1.0: USB hub found [ 1.400257] hub 3-0:1.0: 2 ports detected [ 1.408993] nouveau 0000:01:00.0: bios: version 60.84.41.00.00 [ 1.432079] hub 4-0:1.0: USB hub found [ 1.432087] hub 4-0:1.0: 2 ports detected [ 1.432687] pci 0000:00:00.0: Intel G33 Chipset [ 1.432703] pci 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable [ 1.434197] pci 0000:00:00.0: detected 8192K stolen memory [ 1.434236] [drm] Memory usable by graphics device = 512M [ 1.434241] [drm] Replacing VGA console driver [ 1.435072] Console: switching to colour dummy device 80x25 [ 1.441240] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.441242] [drm] Driver supports precise vblank timestamp query. [ 1.441540] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 1.442440] [drm] RC6 disabled, disabling runtime PM support [ 1.442447] [drm] initialized overlay support [ 1.471147] nouveau 0000:01:00.0: fb: 256 MiB GDDR3 [ 1.519478] [TTM] Zone kernel: Available graphics memory: 1020872 kiB [ 1.519480] [TTM] Initializing pool allocator [ 1.519491] [TTM] Initializing DMA pool allocator [ 1.519513] nouveau 0000:01:00.0: DRM: VRAM: 256 MiB [ 1.519515] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB [ 1.519521] nouveau 0000:01:00.0: DRM: TMDS table version 2.0 [ 1.519523] nouveau 0000:01:00.0: DRM: DCB version 4.0 [ 1.519526] nouveau 0000:01:00.0: DRM: DCB outp 00: 01000302 00000030 [ 1.519529] nouveau 0000:01:00.0: DRM: DCB outp 01: 02000300 00000028 [ 1.519532] nouveau 0000:01:00.0: DRM: DCB outp 02: 02011312 00000030 [ 1.519534] nouveau 0000:01:00.0: DRM: DCB outp 03: 04011310 00000028 [ 1.519537] nouveau 0000:01:00.0: DRM: DCB outp 04: 010223f1 00c0c080 [ 1.519539] nouveau 0000:01:00.0: DRM: DCB conn 00: 2030 [ 1.519542] nouveau 0000:01:00.0: DRM: DCB conn 01: 1130 [ 1.519544] nouveau 0000:01:00.0: DRM: DCB conn 02: 0210 [ 1.519546] nouveau 0000:01:00.0: DRM: DCB conn 03: 0211 [ 1.519548] nouveau 0000:01:00.0: DRM: DCB conn 04: 0213 [ 1.524224] nouveau 0000:01:00.0: DRM: failed to create encoder 0/1/0: -19 [ 1.524225] nouveau 0000:01:00.0: DRM: TV-1 has no encoders, removing [ 1.524258] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.524259] [drm] Driver supports precise vblank timestamp query. [ 1.534507] nouveau 0000:01:00.0: DRM: MM: using CRYPT for buffer copies [ 1.557324] nouveau 0000:01:00.0: No connectors reported connected with modes [ 1.557349] [drm] Cannot find any crtc or sizes - going 1024x768 [ 1.559265] nouveau 0000:01:00.0: DRM: allocated 1024x768 fb: 0x70000, bo ffff92c0355b4000 [ 1.582572] Console: switching to colour frame buffer device 128x48 [ 1.582809] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device [ 1.596027] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0 [ 1.596622] [drm] Initialized i915 1.6.0 20160711 for 0000:00:02.0 on minor 1 [ 1.596669] ata_piix 0000:00:1f.1: version 2.13 [ 1.597712] scsi host0: ata_piix [ 1.597869] scsi host1: ata_piix [ 1.597940] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 1.597941] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 1.598030] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.598870] scsi host2: ata_piix [ 1.599030] scsi host3: ata_piix [ 1.599109] ata3: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xed00 irq 19 [ 1.599111] ata4: SATA max UDMA/133 cmd 0xeb00 ctl 0xec00 bmdma 0xed08 irq 19 [ 1.621386] fbcon: inteldrmfb (fb1) is primary device [ 1.621388] fbcon: Remapping primary device, fb1, to tty 1-63 [ 1.640027] usb 5-2: new high-speed USB device number 2 using ehci-pci [ 1.766769] ata3.00: HPA detected: current 249803434, native 250069680 [ 1.766772] ata3.00: supports DRM functions and may not be fully accessible [ 1.766776] ata3.00: ATA-9: Crucial_CT128MX100SSD1, MU01, max UDMA/133 [ 1.766777] ata3.00: 249803434 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.766925] ata4.00: HPA detected: current 976771055, native 976773168 [ 1.766927] ata4.00: ATA-8: Hitachi HTS545050B9A300, PB4OC60F, max UDMA/133 [ 1.766929] ata4.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.769381] ata1.00: ATAPI: PHILIPS SPD6005T, P1.0, max UDMA/66 [ 1.771702] ata4.00: configured for UDMA/133 [ 1.773396] ata3.00: supports DRM functions and may not be fully accessible [ 1.773997] ata1.00: configured for UDMA/66 [ 1.777498] ata3.00: configured for UDMA/133 [ 1.793678] usb 5-2: New USB device found, idVendor=0bda, idProduct=8178 [ 1.793681] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.793683] usb 5-2: Product: USB WLAN [ 1.793685] usb 5-2: Manufacturer: 802.11n [ 1.793686] usb 5-2: SerialNumber: 00e04c000001 [ 1.912042] usb 5-3: new high-speed USB device number 3 using ehci-pci [ 2.077675] usb 5-3: New USB device found, idVendor=0bda, idProduct=0111 [ 2.077678] usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.077680] usb 5-3: Product: USB2.0-CRW [ 2.077682] usb 5-3: Manufacturer: Generic [ 2.077683] usb 5-3: SerialNumber: 20021111153705700 [ 2.082356] usb-storage 5-3:1.0: USB Mass Storage device detected [ 2.082490] scsi host4: usb-storage 5-3:1.0 [ 2.082586] usbcore: registered new interface driver usb-storage [ 2.083641] usbcore: registered new interface driver uas [ 2.112027] tsc: Refined TSC clocksource calibration: 2399.999 MHz [ 2.112035] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2298364cab5, max_idle_ns: 440795214892 ns [ 2.392024] usb 3-1: new full-speed USB device number 2 using uhci_hcd [ 2.467145] random: fast init done [ 2.600048] usb 3-1: New USB device found, idVendor=041e, idProduct=4064 [ 2.600051] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.600053] usb 3-1: Product: VF0420 Live! Cam Vista IM [ 2.600055] usb 3-1: Manufacturer: Creative Labs [ 2.762012] input: ImExPS/2 BYD TouchPad as /devices/platform/i8042/serio1/input/input4 [ 2.769952] i915 0000:00:02.0: fb1: inteldrmfb frame buffer device [ 2.770720] scsi 0:0:0:0: CD-ROM PHILIPS SPD6005T P1.0 PQ: 0 ANSI: 5 [ 2.780720] scsi 2:0:0:0: Direct-Access ATA Crucial_CT128MX1 MU01 PQ: 0 ANSI: 5 [ 2.793992] sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.793994] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.794275] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 2.828439] scsi 3:0:0:0: Direct-Access ATA Hitachi HTS54505 C60F PQ: 0 ANSI: 5 [ 2.879524] ata3.00: Enabling discard_zeroes_data [ 2.879543] sd 2:0:0:0: [sda] 249803434 512-byte logical blocks: (128 GB/119 GiB) [ 2.879545] sd 2:0:0:0: [sda] 4096-byte physical blocks [ 2.879581] sd 3:0:0:0: [sdb] 976771055 512-byte logical blocks: (500 GB/466 GiB) [ 2.879633] sd 3:0:0:0: [sdb] Write Protect is off [ 2.879636] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.879666] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.879691] sd 2:0:0:0: [sda] Write Protect is off [ 2.879693] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.879713] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.879857] ata3.00: Enabling discard_zeroes_data [ 2.880689] sda: sda1 sda2 sda3 [ 2.880970] ata3.00: Enabling discard_zeroes_data [ 2.881059] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.919453] sdb: sdb1 sdb2 sdb3 [ 2.919786] sd 3:0:0:0: [sdb] Attached SCSI disk [ 3.110977] scsi 4:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS [ 3.117603] scsi 4:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS [ 3.124332] scsi 4:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS [ 3.131091] scsi 4:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS [ 3.136105] clocksource: Switched to clocksource tsc [ 4.320395] floppy0: no floppy controllers found [ 50.499808] random: crng init done [ 72.282979] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 73.430729] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time. [ 73.607146] ip_tables: (C) 2000-2006 Netfilter Core Team [ 73.730106] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 73.730265] systemd[1]: Detected architecture x86-64. [ 73.748448] systemd[1]: Set hostname to <gameover>. [ 74.822018] systemd[1]: Listening on Journal Socket (/dev/log). [ 74.822262] systemd[1]: Created slice System Slice. [ 74.822359] systemd[1]: Listening on Journal Audit Socket. [ 74.822390] systemd[1]: Listening on Syslog Socket. [ 74.836108] systemd[1]: Mounting POSIX Message Queue File System... [ 74.836909] systemd[1]: Mounting Huge Pages File System... [ 74.837006] systemd[1]: Listening on udev Kernel Socket. [ 75.416946] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [ 75.565339] lp: driver loaded but no devices found [ 75.712729] systemd-journald[252]: Received request to flush runtime journal from PID 1 [ 75.820397] ppdev: user-space parallel port driver [ 75.827997] RPC: Registered named UNIX socket transport module. [ 75.827999] RPC: Registered udp transport module. [ 75.827999] RPC: Registered tcp transport module. [ 75.828000] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 75.833637] parport_pc 00:03: reported by Plug and Play ACPI [ 75.833709] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 75.932182] lp0: using parport0 (interrupt-driven). [ 75.980425] loop: module loaded [ 77.994155] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line [ 77.994158] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 77.994160] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 77.994161] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0 [ 77.994163] snd_hda_codec_realtek hdaudioC0D2: dig-out=0x1e/0x0 [ 77.994164] snd_hda_codec_realtek hdaudioC0D2: inputs: [ 77.994166] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19 [ 77.994168] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18 [ 77.994170] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a [ 78.004812] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5 [ 78.005292] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 78.005342] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 78.005412] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 78.005493] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 78.005597] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 78.124687] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 78.445306] intel_rng: FWH not detected [ 78.509633] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 78.509678] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 78.509723] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 78.509765] sd 4:0:0:0: Attached scsi generic sg3 type 0 [ 78.509805] sd 4:0:0:1: Attached scsi generic sg4 type 0 [ 78.509844] sd 4:0:0:2: Attached scsi generic sg5 type 0 [ 78.509883] sd 4:0:0:3: Attached scsi generic sg6 type 0 [ 78.516682] input: PC Speaker as /devices/platform/pcspkr/input/input11 [ 79.165253] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20160422/utaddress-255) [ 79.165260] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 79.165293] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 79.238309] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully [ 79.241411] leds_ss4200: no LED devices found [ 79.298270] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 79.352409] flexcop-pci: will use the HW PID filter. [ 79.352411] flexcop-pci: card revision 2 [ 79.380200] DVB: registering new adapter (FlexCop Digital TV device) [ 79.381917] b2c2-flexcop: MAC address = 00:d0:d7:0d:ff:50 [ 79.382344] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121) [ 79.382347] CX24123: wrong demod revision: 87 [ 79.559502] coretemp coretemp.0: Using relative temperature scale! [ 79.559531] coretemp coretemp.0: Using relative temperature scale! [ 79.559553] coretemp coretemp.0: Using relative temperature scale! [ 79.559574] coretemp coretemp.0: Using relative temperature scale! [ 79.959824] b2c2-flexcop: found 'ST STV0299 DVB-S' . [ 79.959832] b2c2_flexcop_pci 0000:04:01.0: DVB: registering adapter 0 frontend 0 (ST STV0299 DVB-S)... [ 79.959985] b2c2-flexcop: initialization of 'Sky2PC/SkyStar 2 DVB-S rev 2.6' at the 'PCI' bus controlled by a 'FlexCopIIb' complete [ 80.126834] media: Linux media interface: v0.10 [ 80.203195] Linux video capture interface: v2.00 [ 80.259996] gspca_main: v2.14.0 registered [ 80.266970] gspca_main: ov519-2.14.0 probing 041e:4064 [ 81.083348] rtl8192cu: Chip version 0x11 [ 81.120052] floppy0: no floppy controllers found [ 81.160213] rtl8192cu: Board Type 0 [ 81.160458] rtl_usb: rx_max_size 15360, rx_urb_num 8, in_ep 1 [ 81.160504] rtl8192cu: Loading firmware rtlwifi/rtl8192cufw_TMSC.bin [ 81.164619] iTCO_vendor_support: vendor-support=0 [ 81.187131] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 81.187435] usbcore: registered new interface driver rtl8192cu [ 81.196911] usb 5-2: firmware: direct-loading firmware rtlwifi/rtl8192cufw_TMSC.bin [ 81.391835] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 81.391907] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460) [ 81.392179] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 82.371106] Adding 4095996k swap on /dev/sdb2. Priority:-1 extents:1 across:4095996k FS [ 83.041222] input: ov519 as /devices/pci0000:00/0000:00:1d.2/usb3/3-1/input/input12 [ 83.041399] usbcore: registered new interface driver ov519 [ 83.539310] usbcore: registered new interface driver snd-usb-audio [ 89.547828] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 89.565331] r8169 0000:03:00.0 eth0: link down [ 89.565378] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 89.568872] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 89.570837] rtl8192cu: MAC auto ON okay! [ 89.603477] rtl8192cu: Tx queue select: 0x05 [ 90.009169] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 90.016588] rtl8192cu: MAC auto ON okay! [ 90.049351] rtl8192cu: Tx queue select: 0x05 [ 90.469804] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 91.239578] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 92.232216] rtl8192cu: MAC auto ON okay! [ 92.264964] rtl8192cu: Tx queue select: 0x05 [ 92.684539] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 92.730762] wlan0: authenticate with 54:22:f8:dc:93:f6 [ 92.741999] wlan0: send auth to 54:22:f8:dc:93:f6 (try 1/3) [ 92.744367] wlan0: authenticated [ 92.748036] wlan0: associate with 54:22:f8:dc:93:f6 (try 1/3) [ 92.751861] wlan0: RX AssocResp from 54:22:f8:dc:93:f6 (capab=0x431 status=0 aid=1) [ 92.753735] wlan0: associated [ 92.753801] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 95.398634] fuse init (API version 7.25) [ 109.186808] sd 4:0:0:2: [sde] Attached SCSI removable disk [ 116.768873] sd 4:0:0:3: [sdf] Attached SCSI removable disk [ 116.770617] sd 4:0:0:1: [sdd] Attached SCSI removable disk [ 116.771513] sd 4:0:0:0: [sdc] Attached SCSI removable disk darek@gameover:~$Proszę urbinek ; oto wyniki tych poleceń w konsoli ..
System operacyjny ma być dla ludzi, a nie ludzie dla systemu operacyjnego.Offline
#9 2018-08-18 15:57:50
skullman - Użytkownik
- skullman
- Użytkownik
- Zarejestrowany: 2010-04-08
Re: Problem z rozdzielczością przy zintegrowanej grafice INTEL G31
[quote=wlodarek1]A jednak płatne windows radzi sobie ze zintegrowaną grafiką intela .
DElaczego linuksy nie mogą ?!
[.....][/quote]
To już n-ty wpis typu "płatny windows robi to lepiej", no skoro robi to lepiej to po co się na siłę pchać w coś co robi to gorzej? Nie rozumiem tej masochistycznej praktyki.
Offline
#10 2018-08-18 16:03:04
wlodarek1 - Użytkownik
Re: Problem z rozdzielczością przy zintegrowanej grafice INTEL G31
Pcham się np dlatego że linux nie łapie wirusów taki jak windows i bezpieczniej jest wg mnie z poziomu linuksa logować się na
stronie banku , by za coś zapłacić online .
System operacyjny ma być dla ludzi, a nie ludzie dla systemu operacyjnego.
Offline
#11 2018-08-18 17:46:28
091619EE - Użytkownik
- 091619EE
- Użytkownik
- Zarejestrowany: 2018-07-09
Re: Problem z rozdzielczością przy zintegrowanej grafice INTEL G31
A jednak płatne windows radzi sobie ze zintegrowaną grafiką intela .[/quote]
jeszcze dobrze sobie radzą z uruchamianiem złośliwego oprogramowania:
[img]https://s33.postimg.cc/ywhofbv5b/1267237.png[/img]
[b]a na Linuxie prawie nic mi nie działa :([/b]
///
Offline
#12 2018-08-18 18:29:30
loms - Użytkownik
- loms
- Użytkownik
- Skąd: Tarnowskie Góry
- Zarejestrowany: 2007-07-20
Re: Problem z rozdzielczością przy zintegrowanej grafice INTEL G31
[quote=091619EE][b]a na Linuxie prawie nic mi nie działa :([/b]
///[/quote]
Wystarczy pechowe użycie dd tak jak załatwiłeś sobie już dysk o czym pisałeś tutaj.
Masz coś autorskiego z tego szkodliwego oprogramowania co pracuje i zarabia dla Ciebie?
Prawo jest jak płot, wąż się prześlizgnie, tygrys przeskoczy a bydło się nie rozbiega.
Offline
#13 2018-08-18 19:22:44
091619EE - Użytkownik
- 091619EE
- Użytkownik
- Zarejestrowany: 2018-07-09
Re: Problem z rozdzielczością przy zintegrowanej grafice INTEL G31
[quote=loms][quote=091619EE][b]a na Linuxie prawie nic mi nie działa :([/b]
///[/quote]
Wystarczy pechowe użycie dd tak jak załatwiłeś sobie już dysk o czym pisałeś tutaj.
Masz coś autorskiego z tego szkodliwego oprogramowania co pracuje i zarabia dla Ciebie?[/quote]
Niestety nie, ale jak chcesz to mogę coś naskrobać dla Linuxa i przetestujesz :)
Poza tym większośc tych wirusów z tej listy nawet nie uruchomisz bo potrzebują serwerów C&C,
które już dawno są nieaktywne. Wyjątkiem jest np. [b]Petya[/b] albo [b]TeslaCrypt[/b], bo one generują klucz lokalnie (który jest potem szyfrowany zahardcodowanym kluczem publicznym i w zaszyfrowanej postaci przedstawiany użytkownikowi jako "identyfikator")
Offline
#14 2018-08-18 23:47:11
wikingagressor - Użytkownik
- wikingagressor
- Użytkownik
- Skąd: Józefów k.Błonia, mazowieck
- Zarejestrowany: 2015-02-03
Re: Problem z rozdzielczością przy zintegrowanej grafice INTEL G31
Kod:
00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) 01:00.0 VGA compatible controller: NVIDIA Corporation G84 [GeForce 8600 GT] (rev a1)
Wynika z tego, ze masz w systemie 2 karty graficzne. To komplikuje troche sprawe, bo zwieksza liczbe mozliwosci dzialania systemu pod wzgledem graficznym. Dodatkowo nieskonfigurowane wyjscia graficzne moga ze soba konkurowac o sygnal z monitora i to powoduje problemy z rozdzielczoscia.
Peace, Love and Debian for the World!!!
Offline
#15 2018-08-19 06:51:30
wlodarek1 - Użytkownik
Re: Problem z rozdzielczością przy zintegrowanej grafice INTEL G31
Ale połączenie jest tylko 1 kabelkiem :
Wyjście vga grafiki zintegrowanej z wejściem vga monitora.
Kabel Dvi -Hdmi dla grafiki Pci - odłączyłem.
Tak że obie karty graficzne chyba nie konkurują....
Czy znajdzie się jakikolwiek sposób na ustawienie rozdziałki 1680 x 1050 czy tylko będziemy się sprzeczać czy lepszy jest linux czy windows ?!
Ostatnio edytowany przez wlodarek1 (2018-08-19 09:25:02)
System operacyjny ma być dla ludzi, a nie ludzie dla systemu operacyjnego.
Offline
#16 2018-08-19 12:16:29
wikingagressor - Użytkownik
- wikingagressor
- Użytkownik
- Skąd: Józefów k.Błonia, mazowieck
- Zarejestrowany: 2015-02-03
Re: Problem z rozdzielczością przy zintegrowanej grafice INTEL G31
[quote=wlodarek1]Ale połączenie jest tylko 1 kabelkiem :
Wyjście vga grafiki zintegrowanej z wejściem vga monitora.
Kabel Dvi -Hdmi dla grafiki Pci - odłączyłem.
Tak że obie karty graficzne chyba nie konkurują....
Czy znajdzie się jakikolwiek sposób na ustawienie rozdziałki 1680 x 1050 czy tylko będziemy się sprzeczać czy lepszy jest linux czy windows ?![/quote]
A co sie dzieje jesli podlaczysz monitor do karty nvidii za pomoca dvi?
Czy wtedy tez sa problemy z ustawieniem rozdzielczosci?
Peace, Love and Debian for the World!!!
Offline
#17 2018-08-19 14:01:57
wlodarek1 - Użytkownik
Re: Problem z rozdzielczością przy zintegrowanej grafice INTEL G31
NIe - wtedy nie ma problemów z rozdzielczością .....
Tego posta piszę z poziomu uruchomionego live linuksa MANJARO ;
[manjaro@manjaro ~]$ cat /etc/issue
Manjaro Live ISO (\l) - \s-\r \m
# Welcome to Manjaro #
login for the live environment:
user 'manjaro'
password 'manjaro'[/quote]
I też jest to samo ; dla zitegrowanej grafiki można ustawić najwyżej 1024 x 768 lub mniej
Czy to oznacza że w żadnym linuksie nie dfa się ustawić prawidłowej rozdziałki dla zintegrowanej grafiki intela ?!
Stało się coś ciekawego ; na działającym live Manjaro uruchopmiłem MENEDŻER USTAWIEŃ MANJARO i tam jest KONGIGURACJA SPRZĘTOWA
Poprzez to narzędzie zainstaowałem sterownik VIDEO-LINUX
I okazuje się że w tej chwili nawet na systemie "live" MOŻNA USTAWIĆ rozdziałkę 1680 x 1050 !
Ludzie kochane ; już sam nie wiem co się dzieje ; z "live" manjaro przeszłem na zainstalowanego na dysku Sparky i tu okazuje się że
w graficznym konfiguratorze ekranu pokazała się cała gromada nowych możliwych rozdzielczości do ustawenia .
Czyżby więc ustawienia z linuksa działającego live mogły przeskakiwać na linuksa zainstalowanego na dysku ?!Ostatnio edytowany przez wlodarek1 (2018-08-19 14:38:27)
System operacyjny ma być dla ludzi, a nie ludzie dla systemu operacyjnego.
Offline
#18 2018-08-19 19:29:24
Bodzio - Ojciec Założyciel
Re: Problem z rozdzielczością przy zintegrowanej grafice INTEL G31
[quote=wlodarek1]Czyżby więc ustawienia z linuksa działającego live mogły przeskakiwać na linuksa zainstalowanego na dysku ?![/quote]
Coś bajdurzysz. Zazwyczaj aby nowe stery zadziałały potrzebny jest restart środowiska graficznego - czytaj: wykonaj restart komputera. Nawet Nvidia to pisze po zainstalowaniu sterów.
Można inaczej ale tak jest prościej, tym bardziej dla kogoś kto to pierwszy raz robi.
I jeszcze - pierwszy raz widzę kłopoty z grafiką intela. To po prostu działa od kopa i już.
Debian jest lepszy niż wszystkie klony
Linux register users: #359018
[img]http://www.freebsd.org/gifs/powerlogo.gif[/img]
[url=https://goo.gl/photos/5XGKFkvaMimLwM2s9]Beskid Niski[/url]
Offline
#19 2018-08-21 18:04:22
wlodarek1 - Użytkownik
Re: Problem z rozdzielczością przy zintegrowanej grafice INTEL G31
Działa od kopa , ale z niższą niż powinna być rozdzielczością .
Dziś zauważyłem że sparky z prawidłową już rozdzielczością startuje teraz całe 2 minuty .
Dłużej niż to było po jego zainstalowaniu .....
To że się pojawiły 2 posty to chyba nie moja wina bo przez chwilę wyświetlało komunikat o błedzie ; server .smtp.dug.net cpnnection refused . Coś takiego .....
Ostatnio edytowany przez wlodarek1 (2018-08-21 18:07:10)
System operacyjny ma być dla ludzi, a nie ludzie dla systemu operacyjnego.
Offline
#20 2018-08-21 21:22:26
Bodzio - Ojciec Założyciel
Re: Problem z rozdzielczością przy zintegrowanej grafice INTEL G31
Dobra, jeden Ci usunąłem.
Debian jest lepszy niż wszystkie klony
Linux register users: #359018
[img]http://www.freebsd.org/gifs/powerlogo.gif[/img]
[url=https://goo.gl/photos/5XGKFkvaMimLwM2s9]Beskid Niski[/url]
Offline
#21 2018-08-26 09:26:23
wlodarek1 - Użytkownik
Re: Problem z rozdzielczością przy zintegrowanej grafice INTEL G31
Już się skończyło co dobre ;
dziś linux Sparky uruchomił się z rozdzielczością 1024 x 768 i nier ma możliości zmiany jej na prawidłową 1680 x 1050 .
Dlaczego popsuło się to co było już dobrze ?
System operacyjny ma być dla ludzi, a nie ludzie dla systemu operacyjnego.
Offline
#22 2018-08-26 15:43:26
wikingagressor - Użytkownik
- wikingagressor
- Użytkownik
- Skąd: Józefów k.Błonia, mazowieck
- Zarejestrowany: 2015-02-03
Re: Problem z rozdzielczością przy zintegrowanej grafice INTEL G31
Caly czas masz problem, bo prawdopodobnie sterowniki nie wiedza jak dzialac z dwiema kartami, ktore nie sa poprawnie skonfigurowane. Dlatego zeby "zachowac bezpieczenstwo" powracaja do kompatybilnosci z Vesa i 1024x768. Musisz sie w koncu zdecydowac na konkretny wariant ustawien, ktorych w linuxie masz kilka do wyboru: dziala tylko karta zintegrowana na sterowniku otwartym intela, dziala tylko karta nvidia na sterowniku otwartym, dziala tylko karta nvidia na sterowniku zamknietym, dzialaja obie karty w trybie mieszanym na sterownikach zamknietych.
Peace, Love and Debian for the World!!!
Offline
#23 2018-08-26 18:20:48
wlodarek1 - Użytkownik
Re: Problem z rozdzielczością przy zintegrowanej grafice INTEL G31
w tym momencie połączone są tylko kabelkiem VGA - karta zintegrowana z monitorem .
Pomiędzy kartą PCI a monitorem kabelka nie ma .
Dlaczego więc jest problem ze sterownikami ?
System operacyjny ma być dla ludzi, a nie ludzie dla systemu operacyjnego.
Offline
#24 2018-08-27 14:16:03
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: Problem z rozdzielczością przy zintegrowanej grafice INTEL G31
[quote=wlodarek1]Dlaczego więc jest problem ze sterownikami ?[/quote]
Bo z uporem maniaka nie czytasz co się do ciebie pisze.
Offline
#25 2018-08-28 22:07:55
wikingagressor - Użytkownik
- wikingagressor
- Użytkownik
- Skąd: Józefów k.Błonia, mazowieck
- Zarejestrowany: 2015-02-03
Re: Problem z rozdzielczością przy zintegrowanej grafice INTEL G31
[quote=wlodarek1]w tym momencie połączone są tylko kabelkiem VGA - karta zintegrowana z monitorem .
Pomiędzy kartą PCI a monitorem kabelka nie ma .
Dlaczego więc jest problem ze sterownikami ?[/quote]
Poniewaz karta mimo tego ze nie jest podlaczona do monitora to jest nadal rozpoznawana w systemie i stad problemy. Takie pytanko, dlaczego wolisz kiepska integre niz dedykowana karte nvidii?
Wejdz do biosu, wylacz zintegrowana karte, monitor podlacz przez dvi do karty nvidii i bedziesz mial spokoj i lepsze rozwiazanie.
Peace, Love and Debian for the World!!!
Offline
Strony: 1
- Forum Debian Users Gang
- » Hardware
- » Problem z rozdzielczością przy zintegrowanej grafice INTEL G31
Informacje debugowania
| Time (s) | Query |
|---|---|
| 0.00010 | SET CHARSET latin2 |
| 0.00004 | SET NAMES latin2 |
| 0.00122 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.147.74.247' WHERE u.id=1 |
| 0.00067 | REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '3.147.74.247', 1734500152) |
| 0.00022 | SELECT * FROM punbb_online WHERE logged<1734499852 |
| 0.00078 | DELETE FROM punbb_online WHERE ident='3.141.42.195' |
| 0.00073 | SELECT topic_id FROM punbb_posts WHERE id=320663 |
| 0.00007 | SELECT id FROM punbb_posts WHERE topic_id=30587 ORDER BY posted |
| 0.00026 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=30587 AND t.moved_to IS NULL |
| 0.00034 | SELECT search_for, replace_with FROM punbb_censoring |
| 0.00337 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=30587 ORDER BY p.id LIMIT 0,25 |
| 0.00082 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=30587 |
| Total query time: 0.00862 s | |