Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
#26 2006-06-13 13:31:00
pike - Użytkownik
- pike
- Użytkownik
- Zarejestrowany: 2006-06-10
Re: s3 trio i wielki problem
Mysz optyczna Logitech M-BJ58z koncowka USB do tego przejsciowka USB-PS2 (zielona).Podlaczenie do kompa PS2....Nie mam juz pojecia o co chodzi. KDE startuje pieknie moge sie zalogowac, wszystko sie ladnie uruchamia moja tapeta i ustawienia ekranu.Wszystko jest pieknie...dopuki nie porusze myszka bo wtedy moge juz tylko go resetowac. I myszki testowalem juz rozne i nie pomaga moze ktos ma konfiguracje myszy pod ps2 poprawna moze te moje ustawienia sa do niczego?A moze mysz gryzie sie z ta s3?Wczesniej system instalowalem na 3dfx i wszystko ladnie chodzilo.
Offline
#27 2006-06-13 20:59:20
Zbooj - 
Dark Sith
- Zbooj
- Dark Sith
- Skąd: Siedziba Wszelkiego Zła
- Zarejestrowany: 2005-07-28
Re: s3 trio i wielki problem
Wklej log z Iksów.
Jest w /var/log/X'costam'.log
Są takie opcje
Option "Device" "/dev/psaux"
Option "Protocol" "ImPS/2"
sprobuj zmienic na
Option "Device" "/dev/mouse"
i/lub
Option "Protocol" "Auto"
Sprobuj tez podłączyć ją przed i po zmianie ustawien przez USB
Istnieje też ewentualnosc ze twoj PS/2 cos jest "nie ten tego"
Hmm myszka Logitech:
[url]http://www.xfree86.org/current/mouse6.html#35[/url]
[url]http://www.debian.org/doc/manuals/reference/ch-install.pl.html[/url]
[url=https://www.youtube.com/watch?v=rNg2Dh6gPkw]Nemo sailing home...[/url]
Offline
#28 2006-06-13 23:46:04
pike - Użytkownik
- pike
- Użytkownik
- Zarejestrowany: 2006-06-10
Re: s3 trio i wielki problem
To moj ostatni log ...ja juz chyba sie poddaje .....podlaczalem rowniesz inne mysz bez przejsciowek rowniez.Nic nie daja moje zmiany ...bez myszy chodzi super....A malo tego zauwazylem ze jak bardzo wolno poruszam myszka to dziala ale szybszy ruch"zamraza"obraz.Jutro chyba wrzuce inna karte graficzna...oto moj log
Kod:
XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-14sarge1 20050901212727 fjp@localhost.localdomain)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.8-16.0508-2 i686 [ELF]
Build Date: 02 September 2005
This version of XFree86 has been extensively modified by the Debian
Project, and is not supported by the XFree86 Project, Inc., in any
way. Bugs should be reported to the Debian Bug Tracking System; see
<URL: http://www.debian.org/Bugs/Reporting >.
We strongly encourage the use of the "reportbug" package and command
to ensure that bug reports contain as much useful information as
possible.
Before filing a bug report, you may want to consult the Debian X FAQ:
XHTML version: file:///usr/share/doc/xfree86-common/FAQ.xhtml
plain text version: file:///usr/share/doc/xfree86-common/FAQ.gz
Module Loader present
OS Kernel: Linux version 2.4.32-intrux (root@slack102) (gcc version 3.3.6) #1 Mon Jan 16 16:54:28 CET 2006
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Jun 13 23:31:16 2006
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "SAMSUNG SYNCMASTER 151B"
(**) | |-->Device "Generic Video Card"
(**) |-->Input Device "Generic Keyboard"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "pl"
(**) XKB: layout: "pl"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Configured Mouse"
(**) |-->Input Device "Generic Mouse"
(WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/lib/X11/fonts/CID" does not exist.
Entry deleted from font path.
(**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(++) using VT number 7
(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000002c, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7190 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7191 card 0000,0000 rev 03 class 06,04,00 hdr 01
(II) PCI: 00:03:0: chip 1073,000c card 1073,000c rev 03 class 04,01,00 hdr 00
(II) PCI: 00:04:0: chip 8086,1229 card 8086,3000 rev 08 class 02,00,00 hdr 00
(II) PCI: 00:07:0: chip 8086,7110 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:07:1: chip 8086,7111 card 0000,0000 rev 01 class 01,01,80 hdr 00
(II) PCI: 00:07:2: chip 8086,7112 card 0000,0000 rev 01 class 0c,03,00 hdr 00
(II) PCI: 00:07:3: chip 8086,7113 card 0000,0000 rev 02 class 06,80,00 hdr 00
(II) PCI: 00:12:0: chip 10b7,9200 card 10b7,1000 rev 78 class 02,00,00 hdr 00
(II) PCI: 00:14:0: chip 5333,8811 card 0000,0000 rev 00 class 03,00,00 hdr 00
(II) PCI: 01:00:0: chip 1002,524c card 0100,0302 rev 00 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0080 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe8000000 - 0xe9ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:20:0) S3 Inc. 86c764/765 [Trio32/64/64V+] rev 0, Mem @ 0xed000000/23, BIOS @ 0xec000000/16
(--) PCI: (1:0:0) ATI Technologies Inc Rage 128 RL/VR AGP rev 0, Mem @ 0xe4000000/26, 0xe9000000/14, I/O @ 0xd000/8, BIOS @ 0xe8000000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xed908000 - 0xed90807f (0x80) MX[B]
[1] -1 0 0xed800000 - 0xed8fffff (0x100000) MX[B]
[2] -1 0 0xed909000 - 0xed909fff (0x1000) MX[B]
[3] -1 0 0xed900000 - 0xed907fff (0x8000) MX[B]
[4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[5] -1 0 0xec000000 - 0xec00ffff (0x10000) MX[B](B)
[6] -1 0 0xed000000 - 0xed7fffff (0x800000) MX[B](B)
[7] -1 0 0x0000e800 - 0x0000e87f (0x80) IX[B]
[8] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[9] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[10] -1 0 0x0000e000 - 0x0000e03f (0x40) IX[B]
(II) Inactive PCI resource ranges:
[0] -1 0 0xe8000000 - 0xe801ffff (0x20000) MX[B](B)
[1] -1 0 0xe9000000 - 0xe9003fff (0x4000) MX[B](B)
[2] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
[3] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xed908000 - 0xed90807f (0x80) MX[B]
[1] -1 0 0xed800000 - 0xed8fffff (0x100000) MX[B]
[2] -1 0 0xed909000 - 0xed909fff (0x1000) MX[B]
[3] -1 0 0xed900000 - 0xed907fff (0x8000) MX[B]
[4] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[5] -1 0 0xec000000 - 0xec00ffff (0x10000) MX[B](B)
[6] -1 0 0xed000000 - 0xed7fffff (0x800000) MX[B](B)
[7] -1 0 0x0000e800 - 0x0000e87f (0x80) IX[B]
[8] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[9] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[10] -1 0 0x0000e000 - 0x0000e03f (0x40) IX[B]
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xe8000000 - 0xe801ffff (0x20000) MX[B](B)
[1] -1 0 0xe9000000 - 0xe9003fff (0x4000) MX[B](B)
[2] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
[3] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xed908000 - 0xed90807f (0x80) MX[B]
[6] -1 0 0xed800000 - 0xed8fffff (0x100000) MX[B]
[7] -1 0 0xed909000 - 0xed909fff (0x1000) MX[B]
[8] -1 0 0xed900000 - 0xed907fff (0x8000) MX[B]
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[10] -1 0 0xec000000 - 0xec00ffff (0x10000) MX[B](B)
[11] -1 0 0xed000000 - 0xed7fffff (0x800000) MX[B](B)
[12] -1 0 0xe8000000 - 0xe801ffff (0x20000) MX[B](B)
[13] -1 0 0xe9000000 - 0xe9003fff (0x4000) MX[B](B)
[14] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000e800 - 0x0000e87f (0x80) IX[B]
[18] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[19] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[20] -1 0 0x0000e000 - 0x0000e03f (0x40) IX[B]
[21] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o": No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o": No symbols found
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No symbols found
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "s3"
(II) Loading /usr/X11R6/lib/modules/drivers/s3_drv.o
(II) Module s3: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.3.5
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) S3: driver (version 0.3.5 for S3 chipset: 964-0, 964-1, 968,
Trio32/64, Aurora64V+, Trio64V2/DX or /GX
(II) Primary Device is: PCI 00:14:0
(--) Assigning device section with no busID to primary device
(--) Chipset Trio32/64 found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xed908000 - 0xed90807f (0x80) MX[B]
[6] -1 0 0xed800000 - 0xed8fffff (0x100000) MX[B]
[7] -1 0 0xed909000 - 0xed909fff (0x1000) MX[B]
[8] -1 0 0xed900000 - 0xed907fff (0x8000) MX[B]
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[10] -1 0 0xec000000 - 0xec00ffff (0x10000) MX[B](B)
[11] -1 0 0xed000000 - 0xed7fffff (0x800000) MX[B](B)
[12] -1 0 0xe8000000 - 0xe801ffff (0x20000) MX[B](B)
[13] -1 0 0xe9000000 - 0xe9003fff (0x4000) MX[B](B)
[14] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[17] -1 0 0x0000e800 - 0x0000e87f (0x80) IX[B]
[18] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[19] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[20] -1 0 0x0000e000 - 0x0000e03f (0x40) IX[B]
[21] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xed908000 - 0xed90807f (0x80) MX[B]
[6] -1 0 0xed800000 - 0xed8fffff (0x100000) MX[B]
[7] -1 0 0xed909000 - 0xed909fff (0x1000) MX[B]
[8] -1 0 0xed900000 - 0xed907fff (0x8000) MX[B]
[9] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[10] -1 0 0xec000000 - 0xec00ffff (0x10000) MX[B](B)
[11] -1 0 0xed000000 - 0xed7fffff (0x800000) MX[B](B)
[12] -1 0 0xe8000000 - 0xe801ffff (0x20000) MX[B](B)
[13] -1 0 0xe9000000 - 0xe9003fff (0x4000) MX[B](B)
[14] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[20] -1 0 0x0000e800 - 0x0000e87f (0x80) IX[B]
[21] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[22] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[23] -1 0 0x0000e000 - 0x0000e03f (0x40) IX[B]
[24] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
[25] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[26] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) s3(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(**) s3(0): Depth 16, (--) framebuffer bpp 16
(==) s3(0): RGB weight 565
(==) s3(0): Default visual is TrueColor
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/X11R6/lib/modules/linux/libint10.a
(II) s3(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/X11R6/lib/modules/libvbe.a
(II) s3(0): VESA BIOS detected
(II) s3(0): VESA VBE Version 1.2
(II) s3(0): VESA VBE Total Mem: 1024 kB
(II) s3(0): VESA VBE OEM: S3 Incorporated. Trio32
(==) s3(0): Using gamma correction (1.0, 1.0, 1.0)
(**) s3(0): Chipset: "Trio32/64"
(--) s3(0): Framebuffer @ 0xed000000
(--) s3(0): videoRam = 1024 Kb
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(--) s3(0): MCLK 60.136 Mhz
(--) s3(0): RefClock: 16000
(--) s3(0): Max pixel clock at this depth is 80 Mhz
(II) s3(0): SAMSUNG SYNCMASTER 151B: Using hsync range of 30.00-80.00 kHz
(II) s3(0): SAMSUNG SYNCMASTER 151B: Using vrefresh range of 50.00-75.00 Hz
(II) s3(0): Clock range: 16.00 to 80.00 MHz
(II) s3(0): Not using default mode "640x350" (vrefresh out of range)
(II) s3(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "640x400" (vrefresh out of range)
(II) s3(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "720x400" (vrefresh out of range)
(II) s3(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "640x480" (vrefresh out of range)
(II) s3(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "800x600" (vrefresh out of range)
(II) s3(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1152x864" (insufficient memory for mode)
(II) s3(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) s3(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1280x960" (insufficient memory for mode)
(II) s3(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) s3(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) s3(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1280x1024" (insufficient memory for mode)
(II) s3(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) s3(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) s3(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) s3(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) s3(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1600x1200" (insufficient memory for mode)
(II) s3(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) s3(0): Not using default mode "896x672" (insufficient memory for mode)
(II) s3(0): Not using default mode "1792x1344" (insufficient memory for mode)
(II) s3(0): Not using default mode "896x672" (insufficient memory for mode)
(II) s3(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) s3(0): Not using default mode "928x696" (insufficient memory for mode)
(II) s3(0): Not using default mode "1856x1392" (insufficient memory for mode)
(II) s3(0): Not using default mode "928x696" (insufficient memory for mode)
(II) s3(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) s3(0): Not using default mode "960x720" (insufficient memory for mode)
(II) s3(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) s3(0): Not using default mode "960x720" (insufficient memory for mode)
(II) s3(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1152x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) s3(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1400x1050" (insufficient memory for mode)
(II) s3(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1600x1024" (insufficient memory for mode)
(II) s3(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) s3(0): Not using default mode "1920x1440" (insufficient memory for mode)
(II) s3(0): Not using default mode "960x720" (insufficient memory for mode)
(II) s3(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) s3(0): Not using default mode "1024x768" (insufficient memory for mode)
(II) s3(0): Not using default mode "832x624" (width too large for virtual size)
(--) s3(0): Virtual size is 800x600 (pitch 800)
(**) s3(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) s3(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync
(**) s3(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) s3(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 -hsync -vsync
(**) s3(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) s3(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync
(**) s3(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) s3(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync
(**) s3(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) s3(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync
(**) s3(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) s3(0): Modeline "640x480" 31.50 640 664 704 832 480 489 491 520 -hsync -vsync
(**) s3(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) s3(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync
(==) s3(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xed000000 - 0xed7fffff (0x800000) MS[B]
[1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xed908000 - 0xed90807f (0x80) MX[B]
[7] -1 0 0xed800000 - 0xed8fffff (0x100000) MX[B]
[8] -1 0 0xed909000 - 0xed909fff (0x1000) MX[B]
[9] -1 0 0xed900000 - 0xed907fff (0x8000) MX[B]
[10] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
[11] -1 0 0xec000000 - 0xec00ffff (0x10000) MX[B](B)
[12] -1 0 0xed000000 - 0xed7fffff (0x800000) MX[B](B)
[13] -1 0 0xe8000000 - 0xe801ffff (0x20000) MX[B](B)
[14] -1 0 0xe9000000 - 0xe9003fff (0x4000) MX[B](B)
[15] -1 0 0xe4000000 - 0xe7ffffff (0x4000000) MX[B](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[21] -1 0 0x0000e800 - 0x0000e87f (0x80) IX[B]
[22] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[23] -1 0 0x0000f000 - 0x0000f00f (0x10) IX[B]
[24] -1 0 0x0000e000 - 0x0000e03f (0x40) IX[B]
[25] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B](B)
[26] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[27] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(==) s3(0): Write-combining range (0xed000000,0x100000)
(==) s3(0): Backing store disabled
(II) s3(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 color pattern filled rectangles
Solid Lines
(II) s3(0): Acceleration enabled
(II) s3(0): Using PIO
(II) s3(0): Using SW cursor
(**) Option "dpms"
(**) s3(0): DPMS enabled
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Keyboard "Generic Keyboard" handled by legacy driver
(**) Option "Protocol" "PS/2"
(**) Configured Mouse: Protocol: "PS/2"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(==) Configured Mouse: Buttons: 3
(**) Option "Protocol" "ImPS/2"
(**) Generic Mouse: Protocol: "ImPS/2"
(**) Generic Mouse: always reports core events
(**) Option "Device" "/dev/input/mice"
(EE) xf86OpenSerial: Cannot open device /dev/input/mice
No such device.
(EE) Generic Mouse: cannot open input device
(EE) PreInit failed for input device "Generic Mouse"
(II) UnloadModule: "mouse"
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Warning: font renderer for ".pcf" already registered at priority 0
Warning: font renderer for ".pcf.Z" already registered at priority 0
Warning: font renderer for ".pcf.gz" already registered at priority 0
Warning: font renderer for ".snf" already registered at priority 0
Warning: font renderer for ".snf.Z" already registered at priority 0
Warning: font renderer for ".snf.gz" already registered at priority 0
Warning: font renderer for ".bdf" already registered at priority 0
Warning: font renderer for ".bdf.Z" already registered at priority 0
Warning: font renderer for ".bdf.gz" already registered at priority 0
Warning: font renderer for ".pmf" already registered at priority 0
Could not init font path element unix/:7100, removing from list!Offline
#29 2006-06-14 00:34:48
misioooo - Członek DUG
- misioooo
- Członek DUG
- Skąd: Wrocław
- Zarejestrowany: 2006-06-10
Re: s3 trio i wielki problem
A podłączałeś mychę USB do portu USB bez przejściówki? U mnie w Sarge bez problemów działała, na laptopie do tego :D Za godzinkę sprawdzę w Etch ;)
[img]https://wiki.debian.org/DebianArt/Themes/Lines?action=AttachFile&do=get&target=banner.png[/img]
Offline
#30 2006-06-14 07:11:02
czadman - Bicycle repairman
- czadman
- Bicycle repairman
- Skąd: Wrocław
- Zarejestrowany: 2005-07-08
Re: s3 trio i wielki problem
Czy pakiet udev jest zainstalowany, powinien automatycznie przy starcie tworzyć dowiązanie /dev/input/mice do /dev/psaux, to są te same urządzenia.
[url=http://www.debian.org/][img]http://www.debian.org/logos/openlogo-nd-50.png[/img][/url]
Offline
#31 2006-06-14 07:34:10
pike - Użytkownik
- pike
- Użytkownik
- Zarejestrowany: 2006-06-10
Re: s3 trio i wielki problem
Pakiet udev jest zainstalowany w najnowszej wersji .....dzisiaj jeszcze zrobie tak jak radzi kolega@misioooo .Podlacze ja do USB..W pracy mam rowniez postawionego debiana i musze powiedziec ze nie mam w konfiguracji podwojnych sekcji myszy podejrzewam ze i wy rowniez nie macie tego u siebie.Nie mam pojecia dlaczego ten konfigurator tworzy to podwojnie.Dzisiaj przekopiuje tego configa dzialajacego do siebie i podmienie tylko sterownik i ustawienia monitora.Pozdrawiam
Wlasnie pdlaczalem ja na USB oczywsicie linux znalazl ja automatycznie zarejestrowal sterowniki i jak najbardziej myszka dziala....ale przez 20 sekund bo obraz zamrozony jak zawsze.Prawdopodobnie przyczyna tkwi w karcie graficznej.Wydaje mi sie ze moze sie przegrzewac....Jak w konsoli nie potrzebuje generowac wielkiego obrazu to w srodowisku graficznym za bardzo sie poci.Bardzo dziekuje wszystkim za udzielona mi pomoc.Dziekuje za wklad i zangazowanie....naprawde za moje marudzenie dawno mogliscie mnie olac ale szukaliscie ciagle nowych drog i podpowiedzi za co jeszcze raz serdecznie dziekuje.
Jutro jeszcze zmienie mu karte graficzna na starego voodoo na ktorym zaczynalem instalacje i wszystko bedzie jasne.Pozdrawiam goraco.
Offline
#32 2006-06-15 09:56:59
Zbooj - Dark Sith
- Zbooj
- Dark Sith
- Skąd: Siedziba Wszelkiego Zła
- Zarejestrowany: 2005-07-28
Re: s3 trio i wielki problem
Z tego co wiem Voo Doo to akcelerator nie karta :>
[url=https://www.youtube.com/watch?v=rNg2Dh6gPkw]Nemo sailing home...[/url]
Offline
#33 2006-06-15 11:37:50
pike - Użytkownik
- pike
- Użytkownik
- Zarejestrowany: 2006-06-10
Re: s3 trio i wielki problem
3DFX voodoo3 2000 jest bardzo dobra karta graficzna oczywiscie z akceleracja.
Offline
#34 2006-06-15 13:36:56
Zbooj - Dark Sith
- Zbooj
- Dark Sith
- Skąd: Siedziba Wszelkiego Zła
- Zarejestrowany: 2005-07-28
Re: s3 trio i wielki problem
RESPECT ;) zwracam honor :)
[url=https://www.youtube.com/watch?v=rNg2Dh6gPkw]Nemo sailing home...[/url]
Offline
Informacje debugowania
| Time (s) | Query |
|---|---|
| 0.00014 | SET CHARSET latin2 |
| 0.00006 | SET NAMES latin2 |
| 0.00117 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.223.210.249' WHERE u.id=1 |
| 0.00289 | REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '18.223.210.249', 1732630024) |
| 0.00048 | SELECT * FROM punbb_online WHERE logged<1732629724 |
| 0.00111 | DELETE FROM punbb_online WHERE ident='185.191.171.17' |
| 0.00065 | DELETE FROM punbb_online WHERE ident='3.142.53.151' |
| 0.00080 | SELECT topic_id FROM punbb_posts WHERE id=32130 |
| 0.00276 | SELECT id FROM punbb_posts WHERE topic_id=4035 ORDER BY posted |
| 0.00073 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=4035 AND t.moved_to IS NULL |
| 0.00008 | SELECT search_for, replace_with FROM punbb_censoring |
| 0.00206 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=4035 ORDER BY p.id LIMIT 25,25 |
| 0.00100 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=4035 |
| Total query time: 0.01393 s | |