Forum Debian Users Gang

A jest coś dziwnego w logach samby ew. syslog-u?

moj config ponizej. podaje caly bo moze zachaszowalem cos co jest potrzebne

Komputery pracuja pod systemami windows 2000 i windows xp

dzis zauwazylem ze pod xp trzyma caly czas polaczenie. zrywa tylko pod systemami 2000 i to glownie wtedy kiedy otwierany jest plik excela albo worda

a w logach nic sie nie doszukalem

########################

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
 
    workgroup = domenka
    netbios name = Bolek
       
   
       
# server string is the equivalent of the NT Description field
   server string = %h server (Samba %v)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
   wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
   name resolve order = lmhosts host wins bcast


#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m
   
# Put a capping on the size of the log files (in Kb).
   max log size = 1000

    log level = 2
   
# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
;   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 1

# Do something sensible when Samba crashes: mail the admin a backtrace
;;   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/ServerType.html in the samba-doc
# package for details.
   security = user
;   security = share

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
   encrypt passwords = yes
;  update encrypted = No
;;;   smb passwd file = /etc/samba/smbpasswd


# If you are using encrypted passwords, Samba will need to know what
# password database type you are using. 

passdb backend = tdbsam
obey pam restrictions = yes

##  guest account = nobody
;;  invalid users = root

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Augustin Luton <aluton@hybrigenics.fr> for
# sending the correct chat script for the passwd program in Debian Potato).
   passwd program = /usr/bin/passwd %u
   passwd chat = *EntersnewsUNIXspassword:* %nn *RetypesnewsUNIXspassword:* %nn .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
;   pam password change = no
#Opcje przegladarki
   
    os level = 200
    local master = yes
    domain master = yes
    prefered master = yes
    time server = yes
   
########## Konta Maszyn #########

add machine script = /usr/sbin/useradd -d /dev/null -g machines -c 'Konto Maszyny %I' -s /bin/false %u
domain logons = yes
logon script = logon.bat

########## Profile Mobilne ##########

logon home = \%LProfile%U
logon path = \%LProfile%U

########## polskie znaczki Samba 3.0 #######

unix charset = ISO8859-2
dos charset = CP852

########## opcje sieciowe ###################

interfaces = 192.168.1.251 127.0.0.1
hosts allow = 192.168.1.
bind interfaces only = yes

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
;   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;   printing = cups
;   printcap name = cups

# When using [print$], root is implicitly a 'printer admin', but you can
# also give this right to other users to add drivers and set printer
# properties
;   printer admin = @ntadmin


######## File sharing ########

# Name mangling options
;   preserve case = yes
;   short preserve case = yes


############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
;;   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
;   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

#======================= Share Definitions =======================

[homes]
   comment = Katalog domowy
   browseable = no
   guest ok = no   
   write ok = yes   

# By default, the home directories are exported read-only. Change next
# parameter to 'yes' if you want to be able to write to them.
   writable = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
   directory mask = 0700

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)

[netlogon]
   comment = Usługa logowania domenowego
   path = /var/lib/samba/logon
   guest ok = no
   write ok = yes
   browsable = no
   
#[printers]
#   comment = All Printers
#   browseable = no
#   path = /tmp
#   printable = yes
#   public = no
#   writable = no
#   create mode = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
#[print$]
#   comment = Printer Drivers
#   path = /var/lib/samba/printers
#   browseable = yes
#   read only = yes
#   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# Replace 'ntadmin' with the name of the group your admin users are
# members of.
   write list = root, @ntadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   writable = no
;   locking = no
;   path = /cdrom
;   public = yes

# The next two parameters show how to auto-mount a CD-ROM when the
#    cdrom share is accesed. For this to work /etc/fstab must contain
#    an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
#    is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom

#[public]
#    path = /home/public
#    public = yes
#    only guest = yes
#    writable = yes
#    printable = no
   
[Profile]
    path = /home/Profile
    browseable = no
    writable = yes





############# admina ##############

[Narzedzia]
    comment = Narzedzia
    path = /home/Zasoby/X
    guest ok = no
    create mask = 0777
    directory mask = 0777
    browsable = yes
    writeable = yes
    valid users = admin, administrator

############# osobiste ##############


[admin_home]
    comment = folder osobisty
    path = /home/osobiste/adminh
    guest ok = no
    create mask = 0777
    directory mask = 0777
    browsable = no
    writeable = yes
    available = yes
    vfs objects = recycle
    recycle:repository = .KOSZ
    recycle:keeptree = True
    recycle:versions = True
    recycle:touch = True
    recycle:exclude = *.tmp|*.o|*.obj|~$*|*.ba0
    recycle:exclude_dir = /tmp|/temp|/cache
    valid users = admin, administrator

# Global parameters
[global]
    dos charset = CP852
    unix charset = ISO8859-2
    workgroup = osiedle
    netbios name = adam
    server string = %h server (Samba %v)
    interfaces = 100.116.45.8/24, 127.0.0.1/32
    obey pam restrictions = Yes
    #root directory = admin
    passwd program = /usr/bin/passwd %u
    passwd chat = *EntersnewsUNIXspassword:* %nn *RetypesnewsUNIXspassword:* %nn .
    password level = 8
    unix password sync = Yes
    log level = 3
    syslog = 0
    log file = /var/log/samba/log.%m
    max log size = 500
    time server = Yes
    deadtime = 60
    keepalive = 15
    #socket options = TCP_NODELAY SO_KEEPALIVES SO_SNDBUF=16384 SO_RCVBUF=16384 IPTOS_LOWDELAY
    add user script = /usr/sbin/useradd -d /dev/null -g machines -c 'Konto maszyny %I' -s /bin/false %u
    #logon script = logon.bat
    #logon path = \L%U
    #password server = PDC
    #security=domain
    #domain logons = Yes
    os level = 65
    #preferred master = Yes
    #domain master = Yes
    #local master = Yes
    #wins support = Yes
    #kernel oplocks = No
    message command = /usr/bin/LinPopUp "%f" "%m" %s; rm %s
    read only = No
    hosts allow = 100.116.45., 127.0.0.
    hosts deny = ALL
    #nt acl support = Yes
    #oplock contention limit = 5
   

[homes]
    comment = Katalog uzytkownika
    path = /home/%u
    create mask = 0700
    directory mask = 0700
    browseable = No

#[dokument]
#    comment = Katalog program
#    path = /home/dokument
#    valid users = @dokument
#    write list = @dokument
#    force group = vendis
#    create mask = 0770
#    force create mode = 0770
#    directory mask = 0770
#    force directory mode = 0770
#    dos filetime resolution = Yes

[public]
    comment = Katalog PUBLICZNY
    path = /home/publiczny/
    create mask = 0777
    guest ok = Yes

#[profile]
#    path = /home/profile
#    guest ok = Yes
#    browseable = No
#    vfs objects = fake_perms

   
#[netlogon]
#    comment = Katalog logowania
#    path = /etc/samba/netlogon
#    write list = @admin
#    read only = Yes
#    create mask = 0755
#    directory mask = 0770
#    guest ok = Yes
#    browseable = No
#    locking = No
#    share modes = No

Nie chce mi się studiować twojego pliku wklej mój i ma działać

doszedlem ze problem powstaje zawsze po dodaniu linijki
'valid users = .... ' w konfiguracji samby jako PDC

dodatkowo sprawdzilem jak bedzie sie zachowywac samba jesli sprobuje sie do niej doczepic nie poprzez konto domenowe ale poprzez konto lokalne komputera.
-zalogowalem sie jako administrator do windows 2000 i zamapowalem zasób "kono"
-wyskoczylo okienko z pytaniem o uzytkownika i haslo.
-wprowadzilem takie jak do konta domenowego (czyli takie jak jest na debianie na sambie)
- zasób sie ladnie zamapowal i wszystko jest ok - moge otwierac wszystkie pliki i nic nie zrywa połączenia


konczą mi sie pomysły