Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1

 

#1  2006-12-18 19:49:25

  MMW - Użytkownik

MMW
Użytkownik
Skąd: Warszawa
Zarejestrowany: 2006-03-09
Serwis

problemy z nagrywaniem i DMA

Witam wszystkich po dłuższej przerwie :-)

Stało się. Dzisiaj zainstalowałem Debiana etch i działa ładnie, ale... jest jeden problem. Problem ten powtarza się pod kilkoma dystrybucjami i zawsze jest odobny. Płytki pozwalają się kasować, jednakże przy próbie wypalenia danych pojawia się błąd:

Kod:

wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.34
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 3 = CD-ROM XA mode 2
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'HL-DT-ST'
Identification : 'DVDRAM GSA-4167B'
Revision       : 'DL13'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x0012 
Profile: 0x0011 
Profile: 0x0015 
Profile: 0x0014 
Profile: 0x0013 
Profile: 0x001A 
Profile: 0x001B 
Profile: 0x002B 
Profile: 0x0010 
Profile: 0x0009 
Profile: 0x000A (current)
Profile: 0x0008 
Profile: 0x0002 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 13843 kB/s 78x CD 9x DVD
FIFO size      : 4194304 = 4096 KB
   4 seconds.   3 seconds.   2 seconds.   1 seconds.   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 00 00 00 9B 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 30 06 90 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid) 
resid: 63488
cmd finished after 0.002s timeout 40s
wodim: The current problem looks like a buffer underrun.
wodim: Try to use 'driveropts=burnfree'.
wodim: Make sure that you are root, enable DMA and check your HW/OS set up.

write track data: error after 317440 bytes
Writing  time:   11.790s
Average write speed   0.7x.
Fixating...
Fixating time:   33.160s

Z góry uprzedzam, że nagrywarka jest rozpoznawana prawidłowo, pod /windowsem nagrywa bez najmniejszych problemów, natomiast pod paroma dystrybucjami linuksa [Ubuntu, Mepis, Kubuntu] e tym Debianie - po prostu zdycha.

Bardzo proszę o sugestie i pomoc w tej sprawie.

//EDYCJA
W ramach uzupełnienia:

Kod:

chello062179069011:/home/zyzio# hdparm -d1 /dev/scd0

/dev/scd0:
 setting using_dma to 1 (on)
 HDIO_SET_DMA failed: Function not implemented
chello062179069011:/home/zyzio#

I zawartość fstab:

Kod:

# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
/dev/sda2       /               ext3    defaults,errors=remount-ro 0       1
/dev/sda5       none            swap    sw              0       0
/dev/scd0       /media/cdrom0   udf,iso9660 user,noauto     0       0
/dev/fd0        /media/floppy0  auto    rw,user,noauto  0       0

//Edycja2
Mój problem po wrzuceniu do Google znalazłem tylko na jednym, niemieckojęzycznym forum - nierozwiązany... :-( Może tutaj się uda?

MMW
KDE
Lenovo S510 SFF (10KY000SPB)

Offline

 

#2  2006-12-18 22:54:49

  rychu - elektryk dyżurny

rychu
elektryk dyżurny
Skąd: gdańsk
Zarejestrowany: 2004-12-28

Re: problemy z nagrywaniem i DMA

1. dlaczego ide-scsi?

2. jeśli sam robiłeś jajko to sprawdź czy masz wkompilowane stery do swojego chipsetu i obsługę dma

linux regd. user #248790

Offline

 

#3  2006-12-18 23:39:54

  vilkatla - Użytkownik

vilkatla
Użytkownik
Zarejestrowany: 2006-11-30

Re: problemy z nagrywaniem i DMA

jesli jadro dystrybucyjne, w /etc/modules dodajesz

Kod:

post-install scsi_mod modprobe -k ide-scsi

jesli kompilowane wlasnorecznie, rekompilacja i M (albo Y) przy:

Kod:

SCSI support
SCSI cd-rom support
SCSI generic support
SCSI emulation support

pzdr

Offline

 

#4  2006-12-19 09:58:24

  MMW - Użytkownik

MMW
Użytkownik
Skąd: Warszawa
Zarejestrowany: 2006-03-09
Serwis

Re: problemy z nagrywaniem i DMA

==> Rychu
1. Niestety, nie rozumiem pierwszego pytania, tzn. nie wiem, dlaczego scsi i dlaczegoby nie :-) Nie mam pojęcia, co to scsi [to znaczy teraz sprawdziłem w wikipedii, ale i tak nic mi to nie mówi].
2. Prędzej sam zniósłbym jajko, niż skompilował ;-) Debiana wziąłem stąd:
http://cdimage.debian.org/cdimage/etch_di_rc1/i386/iso-cd/debian-testing-i386-netinst.iso

==> vilkatla
modules zmieniłem:

Kod:

# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.

loop
sbp2
post-install scsi_mod modprobe -k ide-scsi

Komputer zrestartowałem. K3B zainstalowałem. Płytke wypalałem. I jak zwykle płytkę wyczyściło, ale nie nagrało:

Kod:

System
-----------------------
K3b Version: 0.12.17

KDE Version: 3.5.5
QT Version:  3.3.7
Kernel:      2.6.18-3-686
Devices
-----------------------
HL-DT-ST DVDRAM GSA-4167B DL13 (/dev/scd0, /dev/sg1) at /media/cdrom0 [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD-R dwuwarstwowa; DVD+R; DVD+RW; DVD+R dwuwarstwowa] [DVD-ROM; DVD-R sekwencyjna; DVD-R dwuwarstwowa sekwencyjna; DVD-RAM; DVD-RW w trybie ograniczonego zastępowania; DVD-RW sekwencyjny; DVD+RW; DVD+R; DVD+R dwuwarstwowa; CD-ROM; CD-R; CD-RW] [Sesja naraz (SAO); TAO; RAW; SAO/R96P; SAO/R96R; Surowe/R16; Surowe/R96P; Surowe/R96R; Ograniczone zastępowanie]

Used versions
-----------------------
cdrecord: 2.1.1a03

cdrecord
-----------------------
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.34
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'HL-DT-ST'
Identification : 'DVDRAM GSA-4167B'
Revision       : 'DL13'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x0012 
Profile: 0x0011 
Profile: 0x0015 
Profile: 0x0014 
Profile: 0x0013 
Profile: 0x001A 
Profile: 0x001B 
Profile: 0x002B 
Profile: 0x0010 
Profile: 0x0009 
Profile: 0x000A (current)
Profile: 0x0008 
Profile: 0x0002 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 13496 kB/s 76x CD 9x DVD
FIFO size      : 4194304 = 4096 KB
Track 01: data    49 MB        
Total size:       57 MB (05:40.28) = 25521 sectors
Lout start:       57 MB (05:42/21) = 25521 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 2
  Reference speed: 6
  Is not unrestricted
  Is erasable
  Disk sub type: High speed Rewritable (CAV) media (1)
  ATIP start of lead in:  -11077 (97:34/23)
  ATIP start of lead out: 359849 (79:59/74)
  1T speed low:  4 1T speed high: 10
  2T speed low:  2 2T speed high: 10
  power mult factor: 2 6
  recommended erase/write power: 5
  A1 values: 24 2C DC
  A2 values: 14 A4 4A
  A3 values: 04 C4 80
Disk type:    Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 334328
Speed set to 1764 KB/s
Starting to write CD/DVD at speed  10.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 FF FF FF 6A 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 90 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid) 
resid: 63488
cmd finished after 0.002s timeout 200s
Writing pregap for track 1 at -150
write track pad data: error after 0 bytes
BFree: 1029 K BSize: 1029 K
Starting new track at sector: 0
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 90 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid) 
resid: 63488
cmd finished after 0.002s timeout 200s
/usr/bin/X11/wodim: A write error occured.
/usr/bin/X11/wodim: Please properly read the error message above.
Track 01:    0 of   49 MB written.
write track data: error after 0 bytes
Writing  time:   36.612s
Average write speed   9.3x.
Fixating...
Fixating time:    0.005s

cdrecord command:
-----------------------
/usr/bin/X11/wodim -v gracetime=2 dev=1,0,0 speed=10 -dao driveropts=burnfree -eject -data /home/zyzio/Desktop/dsl-3.1.iso

Przy okazji mój lsmod:

Kod:

zyzio@chello062179069011:~$ lsmod
Module                  Size  Used by
nls_cp437               5920  0
vfat                   11872  0
fat                    46684  1 vfat
usb_storage            71840  0
nls_iso8859_1           4256  0
isofs                  32540  0
udf                    73156  0
i915                   17600  2
drm                    61332  3 i915
ipv6                  226016  10
ppdev                   8676  0
lp                     11012  0
button                  6672  0
ac                      5188  0
battery                 9636  0
xt_tcpudp               3136  51
xt_state                2272  31
ip_conntrack           49088  1 xt_state
nfnetlink               6680  1 ip_conntrack
ipt_REJECT              5248  4
xt_limit                2752  6
ipt_LOG                 6112  6
iptable_filter          3104  1
ip_tables              12964  1 iptable_filter
x_tables               13316  6 xt_tcpudp,xt_state,ipt_REJECT,xt_limit,ipt_LOG,ip_tables
dm_snapshot            15520  0
dm_mirror              19152  0
dm_mod                 50232  2 dm_snapshot,dm_mirror
sbp2                   20840  0
loop                   15048  0
tsdev                   7520  0
snd_hda_intel          17332  1
snd_hda_codec         137856  1 snd_hda_intel
snd_pcm_oss            38368  0
snd_mixer_oss          15200  1 snd_pcm_oss
i2c_i801                7404  0
psmouse                35016  0
parport_pc             32164  1
parport                33256  3 ppdev,lp,parport_pc
rtc                    12372  0
floppy                 53156  0
i2c_core               19680  1 i2c_i801
serio_raw               6660  0
snd_pcm                68644  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_timer              20996  1 snd_pcm
pcspkr                  3072  0
snd                    47012  8 snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore               9248  1 snd
snd_page_alloc          9640  2 snd_hda_intel,snd_pcm
intel_agp              21148  1
agpgart                29896  3 drm,intel_agp
sg                     31292  0
sr_mod                 15876  1
cdrom                  32544  1 sr_mod
evdev                   9088  1
eth1394                18212  0
ext3                  119208  1
jbd                    52456  1 ext3
mbcache                 8356  1 ext3
sd_mod                 19040  3
generic                 5028  0 [permanent]
ide_core              110504  2 usb_storage,generic
ata_piix               13576  3
libata                 89332  1 ata_piix
scsi_mod              124168  6 usb_storage,sbp2,sg,sr_mod,sd_mod,libata
ohci1394               30800  0
ieee1394               86904  3 sbp2,eth1394,ohci1394
r8169                  27944  0
ehci_hcd               28136  0
uhci_hcd               21032  0
usbcore               112676  4 usb_storage,ehci_hcd,uhci_hcd
thermal                13608  0
processor              28840  1 thermal
fan                     4804  0
zyzio@chello062179069011:~$

Mój lspci:

Kod:

zyzio@chello062179069011:~$ lspci
00:00.0 Host bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Express Memory Controller Hub (rev 0e)
00:02.0 VGA compatible controller: Intel Corporation 82915G/GV/910GL Express Chipset Family Graphics Controller (rev 0e)
00:1b.0 Audio device: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3)
00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03)
01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)
01:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link)
zyzio@chello062179069011:~$

i jajko:

Kod:

zyzio@chello062179069011:~$ uname -r
2.6.18-3-686
zyzio@chello062179069011:~$ uname

W razie jakichkolwiek pytań natychmiast odpowiem - mam dzisiaj urlop :P

MMW
KDE
Lenovo S510 SFF (10KY000SPB)

Offline

 

#5  2006-12-19 10:31:43

  pk111 - Użytkownik

pk111
Użytkownik
Skąd: Raciążek
Zarejestrowany: 2005-07-20
Serwis

Re: problemy z nagrywaniem i DMA

spróbuj wypalić obraz bezpośrednio przez cdrecord ,(spod root'a)

#cdrecord -v -dao driveropts=burnfree dev=/dev/hdc obraz.iso

dev=/dev/hdc -to nazwa urządzenia ,które Twój system rozpoznaje jako nagrywarkę

obraz.iso -sam wiesz ;)


SCSI to taki sam interfejs jak IDE tylko ,że szeregowy,szybszy i możesz podłączyć więcej urządzeń

[/code]

Offline

 

#6  2006-12-19 10:48:21

  MMW - Użytkownik

MMW
Użytkownik
Skąd: Warszawa
Zarejestrowany: 2006-03-09
Serwis

Re: problemy z nagrywaniem i DMA

Wklepuję to polecenie na różne sposoby i nic się nie dzieje :-( Żadnych komunikatów.

MMW
KDE
Lenovo S510 SFF (10KY000SPB)

Offline

 

#7  2006-12-19 10:53:39

  pk111 - Użytkownik

pk111
Użytkownik
Skąd: Raciążek
Zarejestrowany: 2005-07-20
Serwis

Re: problemy z nagrywaniem i DMA

masz zainstalowany cdrecord?jeśli nie to:

#aptitude cdrecord

Offline

 

#8  2006-12-19 11:06:36

  MMW - Użytkownik

MMW
Użytkownik
Skąd: Warszawa
Zarejestrowany: 2006-03-09
Serwis

Re: problemy z nagrywaniem i DMA

Motyla noga! Wypalił!

Kod:

chello062179069011:/home/zyzio/Desktop# cdrecord -v -dao driveropts=burnfree dev=/dev/scd0 dsl-3.1.iso
TOC Type: 1 = CD-ROM
scsidev: '/dev/scd0'
devname: '/dev/scd0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Driveropts: 'burnfree'
SCSI buffer size: 64512
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identification : 'DVDRAM GSA-4167B'
Revision       : 'DL13'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x0012
Profile: 0x0011
Profile: 0x0015
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B
Profile: 0x002B
Profile: 0x0010
Profile: 0x0009
Profile: 0x000A (current)
Profile: 0x0008
Profile: 0x0002
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Drive DMA Speed: 13638 kB/s 77x CD 9x DVD
FIFO size      : 4194304 = 4096 KB
Track 01: data    49 MB
Total size:       57 MB (05:40.28) = 25521 sectors
Lout start:       57 MB (05:42/21) = 25521 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 2
  Reference speed: 6
  Is not unrestricted
  Is erasable
  Disk sub type: High speed Rewritable (CAV) media (1)
  ATIP start of lead in:  -11077 (97:34/23)
  ATIP start of lead out: 359849 (79:59/74)
  1T speed low:  4 1T speed high: 10
  2T speed low:  2 2T speed high: 10
  power mult factor: 2 6
  recommended erase/write power: 5
  A1 values: 24 2C DC
  A2 values: 14 A4 4A
  A3 values: 04 C4 80
Disk type:    Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 334328
Speed set to 1764 KB/s
Starting to write CD/DVD at speed  10.0 in real SAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01:   49 of   49 MB written (fifo 100%) [buf  99%]  10.2x.
Track 01: Total bytes read/written: 52267008/52267008 (25521 sectors).
Writing  time:   52.483s
Average write speed   6.5x.
Min drive buffer fill was 99%
Fixating...
Fixating time:    9.798s
chello062179069011:/home/zyzio/Desktop#

Teraz spróbuję dokonać tego cudu za pomocą K3B.

//Edycja1
I znowu nic :-(((

Kod:

System
-----------------------
K3b Version: 0.12.17

KDE Version: 3.5.5
QT Version:  3.3.7
Kernel:      2.6.18-3-686
Devices
-----------------------
HL-DT-ST DVDRAM GSA-4167B DL13 (/dev/scd0, /dev/sg1) at /media/cdrom0 [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD-R dwuwarstwowa; DVD+R; DVD+RW; DVD+R dwuwarstwowa] [DVD-ROM; DVD-R sekwencyjna; DVD-R dwuwarstwowa sekwencyjna; DVD-RAM; DVD-RW w trybie ograniczonego zastępowania; DVD-RW sekwencyjny; DVD+RW; DVD+R; DVD+R dwuwarstwowa; CD-ROM; CD-R; CD-RW] [Sesja naraz (SAO); TAO; RAW; SAO/R96P; SAO/R96R; Surowe/R16; Surowe/R96P; Surowe/R96R; Ograniczone zastępowanie]

K3b
-----------------------
Size of filesystem calculated: 183

Used versions
-----------------------
cdrecord: 2.1.1a03

cdrecord
-----------------------
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.34
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 3 = CD-ROM XA mode 2
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'HL-DT-ST'
Identification : 'DVDRAM GSA-4167B'
Revision       : 'DL13'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x0012 
Profile: 0x0011 
Profile: 0x0015 
Profile: 0x0014 
Profile: 0x0013 
Profile: 0x001A 
Profile: 0x001B 
Profile: 0x002B 
Profile: 0x0010 
Profile: 0x0009 
Profile: 0x000A (current)
Profile: 0x0008 
Profile: 0x0002 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 13933 kB/s 79x CD 10x DVD
FIFO size      : 4194304 = 4096 KB
Track 01: data     0 MB         padsize:  234 KB
Total size:        0 MB (00:04.02) = 302 sectors
Lout start:        1 MB (00:06/02) = 302 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 2
  Reference speed: 6
  Is not unrestricted
  Is erasable
  Disk sub type: High speed Rewritable (CAV) media (1)
  ATIP start of lead in:  -11077 (97:34/23)
  ATIP start of lead out: 359849 (79:59/74)
  1T speed low:  4 1T speed high: 10
  2T speed low:  2 2T speed high: 10
  power mult factor: 2 6
  recommended erase/write power: 5
  A1 values: 24 2C DC
  A2 values: 14 A4 4A
  A3 values: 04 C4 80
Disk type:    Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 359547
Speed set to 1764 KB/s
Starting to write CD/DVD at speed  10.0 in real TAO mode for multi session.
Last chance to quit, starting real write in 2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01:    0 of    0 MB written.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 00 00 00 9B 00 00 1C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 30 06 90 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid) 
resid: 57344
cmd finished after 0.002s timeout 40s
/usr/bin/X11/wodim: The current problem looks like a buffer underrun.
/usr/bin/X11/wodim: It looks like 'driveropts=burnfree' does not work for this drive.
/usr/bin/X11/wodim: Please report.
/usr/bin/X11/wodim: Make sure that you are root, enable DMA and check your HW/OS set up.
write track data: error after 317440 bytes
Writing  time:   11.555s
Average write speed   0.3x.
Fixating...
Fixating time:   33.077s

cdrecord command:
-----------------------
/usr/bin/X11/wodim -v gracetime=2 dev=1,0,0 speed=10 -tao driveropts=burnfree -eject -multi -xa -tsize=183s - 

mkisofs
-----------------------
183
I: -input-charset not specified, using utf-8 (detected in locale settings)
Total translation table size: 0
Total rockridge attributes bytes: 251
Total directory bytes: 0
Path table size(bytes): 10
Max brk space used 0
183 extents written (0 MB)

mkisofs command:
-----------------------
/usr/bin/X11/mkisofs -gui -graft-points -volid K3b data project -volset  -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher  -preparer  -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-zyzio/k3bWgd44a.tmp -rational-rock -hide-list /tmp/kde-zyzio/k3bO6U9Hb.tmp -joliet -hide-joliet-list /tmp/kde-zyzio/k3bK9Yn4a.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-zyzio/k3bQ8Dgib.tmp

Edycja2
Co ciekawe, programpisze, że za duża prędkość nagrywania, a jak ustawiam mniejszą, to sam automatycznie ją zwiększa. I jeszcze pisze cos o opróżnieniu bufora. W każdym razie plików nagrywac nie chce - coś tam zapisuje, ale nie dają się otworzyć, szczególnie te większe.

MMW
KDE
Lenovo S510 SFF (10KY000SPB)

Offline

 

#9  2006-12-19 11:23:12

  azhag - Admin łajza

azhag
Admin łajza
Skąd: Warszawa
Zarejestrowany: 2005-11-15

Re: problemy z nagrywaniem i DMA

k3b pewnie już nie odpaliłes z roota?

Błogosławieni, którzy czynią FAQ.
[url=http://www.opencaching.pl]opencaching[/url] :: [url=http://dug.net.pl/sources.list]debian sources.list[/url] :: [url=http://www.linuxportal.pl/blogi/azhag/wpisy]coś jakby blog[/url] :: [url=http://dug.net.pl/]polski portal debiana[/url] :: linux user #403712

Offline

 

#10  2006-12-19 11:38:26

  MMW - Użytkownik

MMW
Użytkownik
Skąd: Warszawa
Zarejestrowany: 2006-03-09
Serwis

Re: problemy z nagrywaniem i DMA

Nie odpalałem z root-a - to fakt. Chociaż sztuczki z rootem i K3B na innych systemach też nic nie pomogły. Ale oczywiście mogę zaraz spróbować ;-)

Edycja:
He he, wiedziałem:

System
-----------------------
K3b Version: 0.12.17

KDE Version: 3.5.5
QT Version:  3.3.7
Kernel:      2.6.18-3-686
Devices
-----------------------
HL-DT-ST DVDRAM GSA-4167B DL13 (/dev/scd0, /dev/sg1) at /media/cdrom0 [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD-R dwuwarstwowa; DVD+R; DVD+RW; DVD+R dwuwarstwowa] [DVD-ROM; DVD-R sekwencyjna; DVD-R dwuwarstwowa sekwencyjna; DVD-RAM; DVD-RW w trybie ograniczonego zastępowania; DVD-RW sekwencyjny; DVD+RW; DVD+R; DVD+R dwuwarstwowa; CD-ROM; CD-R; CD-RW] [Sesja naraz (SAO); TAO; RAW; SAO/R96P; SAO/R96R; Surowe/R16; Surowe/R96P; Surowe/R96R; Ograniczone zastępowanie]

K3b
-----------------------
Size of filesystem calculated: 181

Used versions
-----------------------
cdrecord: 2.1.1a03

cdrecord
-----------------------
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.34
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 3 = CD-ROM XA mode 2
Waiting for data on stdin...
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identification : 'DVDRAM GSA-4167B'
Revision       : 'DL13'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x0012
Profile: 0x0011
Profile: 0x0015
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B
Profile: 0x002B
Profile: 0x0010
Profile: 0x0009
Profile: 0x000A (current)
Profile: 0x0008 (current)
Profile: 0x0002
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 10842 kB/s 61x CD 7x DVD
FIFO size      : 4194304 = 4096 KB
Track 01: data     0 MB         padsize:  238 KB
Total size:        0 MB (00:04.02) = 302 sectors
Lout start:        1 MB (00:06/02) = 302 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 2
  Reference speed: 6
  Is not unrestricted
  Is erasable
  Disk sub type: High speed Rewritable (CAV) media (1)
  ATIP start of lead in:  -11077 (97:34/23)
  ATIP start of lead out: 359849 (79:59/74)
  1T speed low:  4 1T speed high: 10
  2T speed low:  2 2T speed high: 10
  power mult factor: 2 6
  recommended erase/write power: 5
  A1 values: 24 2C DC
  A2 values: 14 A4 4A
  A3 values: 04 C4 80
Disk type:    Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 359849 Blocks current: 333749 Blocks remaining: 333447
Speed set to 1764 KB/s
Starting to write CD/DVD at speed  10.0 in real TAO mode for multi session.
Last chance to quit, starting real write in 2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 26100
Track 04:    0 of    0 MB written.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 00 00 66 8F 00 00 1A 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 30 06 90 21 02 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 53248
cmd finished after 0.002s timeout 40s
/usr/bin/X11/wodim: The current problem looks like a buffer underrun.
/usr/bin/X11/wodim: It looks like 'driveropts=burnfree' does not work for this drive.
/usr/bin/X11/wodim: Please report.
/usr/bin/X11/wodim: Make sure that you are root, enable DMA and check your HW/OS set up.
write track data: error after 317440 bytes
Writing  time:   12.802s
Average write speed   0.3x.
Fixating...
Fixating time:   19.911s

cdrecord command:
-----------------------
/usr/bin/X11/wodim -v gracetime=2 dev=1,0,0 speed=10 -tao driveropts=burnfree -eject -multi -waiti -xa -tsize=181s -

mkisofs
-----------------------
Rock Ridge signatures found
Rock Ridge signatures found
181
I: -input-charset not specified, using utf-8 (detected in locale settings)
Rock Ridge signatures found
Total translation table size: 0
Total rockridge attributes bytes: 418
Total directory bytes: 0
Path table size(bytes): 10
Max brk space used 0
26281 extents written (51 MB)

mkisofs command:
-----------------------
/usr/bin/X11/mkisofs -cdrecord-params 18900,26100 -prev-session /dev/scd0 -gui -graft-points -volid K3b data project -volset  -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher  -preparer  -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-root/k3bftZ9sc.tmp -rational-rock -hide-list /tmp/kde-root/k3bJ9oSkb.tmp -joliet -hide-joliet-list /tmp/kde-root/k3btXPuQa.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-root/k3bvCnGsc.tmp

msinfo
-----------------------
18900,26100

msinfo command:
-----------------------
/usr/bin/X11/wodim dev=1,0,0 -msinfo

[/quote]

Na dokładkę konsola:

Kod:

chello062179069011:/home/zyzio# k3b
Link points to "/tmp/ksocket-root"
Link points to "/tmp/kde-root"
kbuildsycoca running...
Reusing existing ksycoca
kio (KSycoca): ERROR: No database available!
kbuildsycoca: WARNING: '/usr/share/applications/kde/ark.desktop' specifies undefined mimetype/servicetype 'application/x-tbz2'
kbuildsycoca: WARNING: 'ark_part.desktop' specifies undefined mimetype/servicetype 'application/x-tbz2'
kbuildsycoca: WARNING: '/usr/share/applications/kde/amarok.desktop' specifies undefined mimetype/servicetype 'application/asx'
kbuildsycoca: WARNING: '/usr/share/applications/kde/amarok.desktop' specifies undefined mimetype/servicetype 'audio/midi'
kbuildsycoca: WARNING: '/usr/share/applications/kde/amarok.desktop' specifies undefined mimetype/servicetype 'audio/x-aac'
kbuildsycoca: WARNING: '/usr/share/applications/kde/amarok.desktop' specifies undefined mimetype/servicetype 'audio/x-m4a'
kbuildsycoca: WARNING: '/usr/share/applications/themus-theme-applier.desktop' specifies undefined mimetype/servicetype 'application/x-gnome-theme-installed'
kbuildsycoca: WARNING: 'knotify.desktop' specifies undefined mimetype/servicetype 'KNotify'
kbuildsycoca: WARNING: '/usr/share/applications/nautilus-folder-handler.desktop' specifies undefined mimetype/servicetype 'x-directory/gnome-default-handler'
kbuildsycoca: WARNING: '/usr/share/applications/nautilus-folder-handler.desktop' specifies undefined mimetype/servicetype 'x-directory/normal'
kbuildsycoca: WARNING: '/usr/share/applications/nautilus-folder-handler.desktop' specifies undefined mimetype/servicetype 'application/x-gnome-saved-search'
kbuildsycoca: WARNING: 'xine_part.desktop' specifies undefined mimetype/servicetype 'KaffeinePart'
kbuildsycoca: WARNING: 'xine_part.desktop' specifies undefined mimetype/servicetype 'audio/x-mpeg'
kbuildsycoca: WARNING: 'xine_part.desktop' specifies undefined mimetype/servicetype 'audio/x-ogg'
kbuildsycoca: WARNING: 'xine_part.desktop' specifies undefined mimetype/servicetype 'audio/x-pn-realaudio-plugin'
kbuildsycoca: WARNING: 'xine_part.desktop' specifies undefined mimetype/servicetype 'video/msvideo'
kbuildsycoca: WARNING: 'xine_part.desktop' specifies undefined mimetype/servicetype 'video/x-avi'
kbuildsycoca: WARNING: 'xine_part.desktop' specifies undefined mimetype/servicetype 'video/x-fli'
kbuildsycoca: WARNING: 'xine_part.desktop' specifies undefined mimetype/servicetype 'video/x-ms-asf-plugin'
kbuildsycoca: WARNING: '/usr/share/applications/sun-java5-java.desktop' specifies undefined mimetype/servicetype 'application/x-java-archive'
kbuildsycoca: WARNING: '/usr/share/applications/sun-java5-java.desktop' specifies undefined mimetype/servicetype 'application/java-archive'
kbuildsycoca: WARNING: '/usr/share/applications/file-roller.desktop' specifies undefined mimetype/servicetype 'application/x-ar'
kbuildsycoca: WARNING: '/usr/share/applications/file-roller.desktop' specifies undefined mimetype/servicetype 'application/x-bzip-compressed-tar'
kbuildsycoca: WARNING: '/usr/share/applications/file-roller.desktop' specifies undefined mimetype/servicetype 'application/x-compressed-tar'
kbuildsycoca: WARNING: '/usr/share/applications/file-roller.desktop' specifies undefined mimetype/servicetype 'application/x-gtar'
kbuildsycoca: WARNING: '/usr/share/applications/file-roller.desktop' specifies undefined mimetype/servicetype 'application/x-lhz'
kbuildsycoca: WARNING: '/usr/share/applications/file-roller.desktop' specifies undefined mimetype/servicetype 'application/x-zip-compressed'
kbuildsycoca: WARNING: '/usr/share/applications/file-roller.desktop' specifies undefined mimetype/servicetype 'application/zip'
kbuildsycoca: WARNING: '/usr/share/applications/file-roller.desktop' specifies undefined mimetype/servicetype 'multipart/x-zip'
kbuildsycoca: WARNING: '/usr/share/applications/file-roller.desktop' specifies undefined mimetype/servicetype 'application/x-war'
kbuildsycoca: WARNING: '/usr/share/applications/file-roller.desktop' specifies undefined mimetype/servicetype 'application/x-ear'
kbuildsycoca: WARNING: '/usr/share/applications/file-roller.desktop' specifies undefined mimetype/servicetype 'application/x-java-archive'
kbuildsycoca: WARNING: '/usr/share/applications/file-roller.desktop' specifies undefined mimetype/servicetype 'application/x-cd-image'
kbuildsycoca: WARNING: '/usr/share/applications/file-roller.desktop' specifies undefined mimetype/servicetype 'application/x-7z-compressed'
kbuildsycoca: WARNING: 'katepart.desktop' specifies undefined mimetype/servicetype 'text/x-fortran'
kbuildsycoca: WARNING: '/usr/share/applications/ooo-math.desktop' specifies undefined mimetype/servicetype 'application/vnd.sun.xml.math'
kbuildsycoca: WARNING: 'kcertpart.desktop' specifies undefined mimetype/servicetype 'application/binary-certificate'
kbuildsycoca: WARNING: '/usr/share/applications/kde/kaffeine.desktop' specifies undefined mimetype/servicetype 'audio/x-mpeg'
kbuildsycoca: WARNING: '/usr/share/applications/kde/kaffeine.desktop' specifies undefined mimetype/servicetype 'audio/x-ogg'
kbuildsycoca: WARNING: '/usr/share/applications/kde/kaffeine.desktop' specifies undefined mimetype/servicetype 'audio/x-pn-realaudio-plugin'
kbuildsycoca: WARNING: '/usr/share/applications/kde/kaffeine.desktop' specifies undefined mimetype/servicetype 'video/msvideo'
kbuildsycoca: WARNING: '/usr/share/applications/kde/kaffeine.desktop' specifies undefined mimetype/servicetype 'video/x-avi'
kbuildsycoca: WARNING: '/usr/share/applications/kde/kaffeine.desktop' specifies undefined mimetype/servicetype 'video/x-fli'
kbuildsycoca: WARNING: '/usr/share/applications/evince.desktop' specifies undefined mimetype/servicetype 'image/vnd.djvu'
kbuildsycoca: WARNING: '/usr/share/applications/gimp-2.2.desktop' specifies undefined mimetype/servicetype 'image/bmp'
kbuildsycoca: WARNING: '/usr/share/applications/gimp-2.2.desktop' specifies undefined mimetype/servicetype 'image/g3fax'
kbuildsycoca: WARNING: '/usr/share/applications/gimp-2.2.desktop' specifies undefined mimetype/servicetype 'image/x-compressed-xcf'
kbuildsycoca: WARNING: '/usr/share/applications/gimp-2.2.desktop' specifies undefined mimetype/servicetype 'image/x-fits'
kbuildsycoca: WARNING: '/usr/share/applications/gimp-2.2.desktop' specifies undefined mimetype/servicetype 'image/x-gray'
kbuildsycoca: WARNING: '/usr/share/applications/gimp-2.2.desktop' specifies undefined mimetype/servicetype 'image/x-png'
kbuildsycoca: WARNING: '/usr/share/applications/gimp-2.2.desktop' specifies undefined mimetype/servicetype 'image/x-portable-anymap'
kbuildsycoca: WARNING: '/usr/share/applications/gimp-2.2.desktop' specifies undefined mimetype/servicetype 'image/x-portable-graymap'
kbuildsycoca: WARNING: '/usr/share/applications/gimp-2.2.desktop' specifies undefined mimetype/servicetype 'image/x-psd'
kbuildsycoca: WARNING: '/usr/share/applications/gimp-2.2.desktop' specifies undefined mimetype/servicetype 'image/x-sgi'
kbuildsycoca: WARNING: '/usr/share/applications/gimp-2.2.desktop' specifies undefined mimetype/servicetype 'image/x-sun-raster'
kbuildsycoca: WARNING: '/usr/share/applications/gimp-2.2.desktop' specifies undefined mimetype/servicetype 'image/x-tga'
kbuildsycoca: WARNING: '/usr/share/applications/gimp-2.2.desktop' specifies undefined mimetype/servicetype 'image/x-xbitmap'
kbuildsycoca: WARNING: '/usr/share/applications/gimp-2.2.desktop' specifies undefined mimetype/servicetype 'image/x-xcf'
kbuildsycoca: WARNING: '/usr/share/applications/gimp-2.2.desktop' specifies undefined mimetype/servicetype 'image/x-xpixmap'
kbuildsycoca: WARNING: '/usr/share/applications/gimp-2.2.desktop' specifies undefined mimetype/servicetype 'image/x-xwindowdump'
kbuildsycoca: WARNING: '/usr/share/applications/kde/kmid.desktop' specifies undefined mimetype/servicetype 'audio/midi'
kbuildsycoca: WARNING: '/usr/share/applications/firefox.desktop' specifies undefined mimetype/servicetype 'application/rss+xml'
kbuildsycoca: WARNING: '/usr/share/applications/firefox.desktop' specifies undefined mimetype/servicetype 'application/rdf+xml'
kbuildsycoca: WARNING: '/usr/share/applications/ooo-base.desktop' specifies undefined mimetype/servicetype 'application/vnd.oasis.opendocument.database'
kbuildsycoca: WARNING: '/usr/share/applications/kde/ktorrent.desktop' specifies undefined mimetype/servicetype 'application/x-torrent'
kbuildsycoca: WARNING: '/usr/share/applications/gfloppy.desktop' specifies undefined mimetype/servicetype 'x-device/floppy'
kbuildsycoca: WARNING: '/usr/share/applications/eog.desktop' specifies undefined mimetype/servicetype 'image/bmp'
kbuildsycoca: WARNING: '/usr/share/applications/eog.desktop' specifies undefined mimetype/servicetype 'image/x-gray'
kbuildsycoca: WARNING: '/usr/share/applications/eog.desktop' specifies undefined mimetype/servicetype 'image/x-icb'
kbuildsycoca: WARNING: '/usr/share/applications/eog.desktop' specifies undefined mimetype/servicetype 'image/x-png'
kbuildsycoca: WARNING: '/usr/share/applications/eog.desktop' specifies undefined mimetype/servicetype 'image/x-portable-anymap'
kbuildsycoca: WARNING: '/usr/share/applications/eog.desktop' specifies undefined mimetype/servicetype 'image/x-portable-graymap'
kbuildsycoca: WARNING: '/usr/share/applications/eog.desktop' specifies undefined mimetype/servicetype 'image/x-xbitmap'
kbuildsycoca: WARNING: '/usr/share/applications/eog.desktop' specifies undefined mimetype/servicetype 'image/x-xpixmap'
kbuildsycoca: WARNING: '/usr/share/applications/ooo-writer.desktop' specifies undefined mimetype/servicetype 'application/vnd.oasis.opendocument.text-web'
kbuildsycoca: WARNING: '/usr/share/applications/ooo-writer.desktop' specifies undefined mimetype/servicetype 'application/vnd.oasis.opendocument.text-master'
kbuildsycoca: WARNING: '/usr/share/applications/ooo-writer.desktop' specifies undefined mimetype/servicetype 'application/vnd.sun.xml.writer.global'
kbuildsycoca: WARNING: '/usr/share/applications/ooo-writer.desktop' specifies undefined mimetype/servicetype 'application/x-doc'
kbuildsycoca: WARNING: '/usr/share/applications/ooo-writer.desktop' specifies undefined mimetype/servicetype 'application/rtf'
kbuildsycoca: WARNING: '/usr/share/applications/ooo-writer.desktop' specifies undefined mimetype/servicetype 'application/vnd.wordperfect'
Invalid entry (missing '=') at /tmp/kde-root/kconf_updateLvk2hb.tmp:1
chello062179069011:/home/zyzio# KWrited - nasłuchiwanie urządzenia /dev/pts/3
Launched ok, pid = 3917

Wskaźnik buforowania [ten w K3B]w ogóle się nie zapełnia podczas nagrywania. Znowu był komunikat, że nastąpiło opróżnienie bufora :-(

MMW
KDE
Lenovo S510 SFF (10KY000SPB)

Offline

 

#11  2006-12-19 11:41:26

  pk111 - Użytkownik

pk111
Użytkownik
Skąd: Raciążek
Zarejestrowany: 2005-07-20
Serwis

Re: problemy z nagrywaniem i DMA

#aptitude mkisofs

Offline

 

#12  2006-12-19 11:46:04

  MMW - Użytkownik

MMW
Użytkownik
Skąd: Warszawa
Zarejestrowany: 2006-03-09
Serwis

Re: problemy z nagrywaniem i DMA

mkisofs oraz genisoimage było zainstalowane - pudło :-)

Nie ma za to libisofs-1 i libburn-1 o ile to coś szkodzi...

MMW
KDE
Lenovo S510 SFF (10KY000SPB)

Offline

 

#13  2006-12-19 11:51:59

  pk111 - Użytkownik

pk111
Użytkownik
Skąd: Raciążek
Zarejestrowany: 2005-07-20
Serwis

Re: problemy z nagrywaniem i DMA

sprawdź wszystkie zależności  k3b

#ldd /bin/k3b (ścieżka do k3b może być inna)

jak nie ma jakiejś biblioteki to  szukasz na :

http://www.debian.org/distrib/packages#search_contents

i instalujesz

tak poza tym to moim zdaniem lepiej nauczyć się używać konsolowych programów i darować sobie nakładki

Offline

 

#14  2006-12-19 12:08:22

  MMW - Użytkownik

MMW
Użytkownik
Skąd: Warszawa
Zarejestrowany: 2006-03-09
Serwis

Re: problemy z nagrywaniem i DMA

Kod:

chello062179069011:/home/zyzio# ldd /usr/bin/k3b
        linux-gate.so.1 =>  (0xffffe000)
        libk3bdevice.so.2 => /usr/lib/libk3bdevice.so.2 (0xb7f19000)
        libk3b.so.2 => /usr/lib/libk3b.so.2 (0xb7d63000)
        libhal.so.1 => /usr/lib/libhal.so.1 (0xb7d58000)
        libdbus-1.so.3 => /usr/lib/libdbus-1.so.3 (0xb7d26000)
        libdbus-qt-1.so.1 => /usr/lib/libdbus-qt-1.so.1 (0xb7d16000)
        libkparts.so.2 => /usr/lib/libkparts.so.2 (0xb7cd1000)
        libkio.so.4 => /usr/lib/libkio.so.4 (0xb7993000)
        libkdeui.so.4 => /usr/lib/libkdeui.so.4 (0xb76bb000)
        libkdesu.so.4 => /usr/lib/libkdesu.so.4 (0xb76a4000)
        libkwalletclient.so.1 => /usr/lib/libkwalletclient.so.1 (0xb7693000)
        libkdecore.so.4 => /usr/lib/libkdecore.so.4 (0xb745b000)
        libDCOP.so.4 => /usr/lib/libDCOP.so.4 (0xb7429000)
        libresolv.so.2 => /lib/tls/i686/cmov/libresolv.so.2 (0xb7416000)
        libutil.so.1 => /lib/tls/i686/cmov/libutil.so.1 (0xb7412000)
        libart_lgpl_2.so.2 => /usr/lib/libart_lgpl_2.so.2 (0xb73fb000)
        libidn.so.11 => /usr/lib/libidn.so.11 (0xb73cb000)
        libkdefx.so.4 => /usr/lib/libkdefx.so.4 (0xb73a0000)
        libqt-mt.so.3 => /usr/lib/libqt-mt.so.3 (0xb6bc7000)
        libaudio.so.2 => /usr/lib/libaudio.so.2 (0xb6bb1000)
        libXt.so.6 => /usr/lib/libXt.so.6 (0xb6b62000)
        libjpeg.so.62 => /usr/lib/libjpeg.so.62 (0xb6b41000)
        libXi.so.6 => /usr/lib/libXi.so.6 (0xb6b39000)
        libXrandr.so.2 => /usr/lib/libXrandr.so.2 (0xb6b36000)
        libXcursor.so.1 => /usr/lib/libXcursor.so.1 (0xb6b2d000)
        libXinerama.so.1 => /usr/lib/libXinerama.so.1 (0xb6b2a000)
        libXft.so.2 => /usr/lib/libXft.so.2 (0xb6b17000)
        libfreetype.so.6 => /usr/lib/libfreetype.so.6 (0xb6aac000)
        libfontconfig.so.1 => /usr/lib/libfontconfig.so.1 (0xb6a82000)
        libdl.so.2 => /lib/tls/i686/cmov/libdl.so.2 (0xb6a7e000)
        libpng12.so.0 => /usr/lib/libpng12.so.0 (0xb6a5b000)
        libXext.so.6 => /usr/lib/libXext.so.6 (0xb6a4d000)
        libX11.so.6 => /usr/lib/libX11.so.6 (0xb6961000)
        libSM.so.6 => /usr/lib/libSM.so.6 (0xb6957000)
        libICE.so.6 => /usr/lib/libICE.so.6 (0xb693f000)
        libpthread.so.0 => /lib/tls/i686/cmov/libpthread.so.0 (0xb692d000)
        libXrender.so.1 => /usr/lib/libXrender.so.1 (0xb6925000)
        libz.so.1 => /usr/lib/libz.so.1 (0xb6911000)
        libfam.so.0 => /usr/lib/libfam.so.0 (0xb6908000)
        libacl.so.1 => /lib/libacl.so.1 (0xb6901000)
        libattr.so.1 => /lib/libattr.so.1 (0xb68fd000)
        libmusicbrainz.so.4 => /usr/lib/libmusicbrainz.so.4 (0xb68cd000)
        libexpat.so.1 => /usr/lib/libexpat.so.1 (0xb68ae000)
        libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0xb67c9000)
        libm.so.6 => /lib/tls/i686/cmov/libm.so.6 (0xb67a4000)
        libgcc_s.so.1 => /lib/libgcc_s.so.1 (0xb6798000)
        libc.so.6 => /lib/tls/i686/cmov/libc.so.6 (0xb6667000)
        libnsl.so.1 => /lib/tls/i686/cmov/libnsl.so.1 (0xb6651000)
        libXfixes.so.3 => /usr/lib/libXfixes.so.3 (0xb664b000)
        /lib/ld-linux.so.2 (0xb7f53000)
        libXau.so.6 => /usr/lib/libXau.so.6 (0xb6648000)
        libXdmcp.so.6 => /usr/lib/libXdmcp.so.6 (0xb6643000)
chello062179069011:/home/zyzio#

Czy to znaczy, że jest dobrze, czy też wprost przeciwnie?

A oto efekt wklepania polecenia w konsole i próby kontynuowania płyty wielosesyjnej:

Kod:

chello062179069011:/home/zyzio/Desktop# cdrecord -v -dao driveropts=burnfree dev=/dev/scd0 Vipassana.pdf
TOC Type: 1 = CD-ROM
scsidev: '/dev/scd0'
devname: '/dev/scd0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Driveropts: 'burnfree'
SCSI buffer size: 64512
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identification : 'DVDRAM GSA-4167B'
Revision       : 'DL13'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x0012
Profile: 0x0011
Profile: 0x0015
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B
Profile: 0x002B
Profile: 0x0010
Profile: 0x0009
Profile: 0x000A (current)
Profile: 0x0008 (current)
Profile: 0x0002
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Drive DMA Speed: 13006 kB/s 73x CD 9x DVD
FIFO size      : 4194304 = 4096 KB
Track 01: data     0 MB
Total size:        0 MB (00:05.30) = 398 sectors
Lout start:        1 MB (00:07/23) = 398 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 2
  Reference speed: 6
  Is not unrestricted
  Is erasable
  Disk sub type: High speed Rewritable (CAV) media (1)
  ATIP start of lead in:  -11077 (97:34/23)
  ATIP start of lead out: 359849 (79:59/74)
  1T speed low:  4 1T speed high: 10
  2T speed low:  2 2T speed high: 10
  power mult factor: 2 6
  recommended erase/write power: 5
  A1 values: 24 2C DC
  A2 values: 14 A4 4A
  A3 values: 04 C4 80
Disk type:    Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 359849 Blocks current: 326549 Blocks remaining: 326151
Speed set to 1764 KB/s
Starting to write CD/DVD at speed  10.0 in real SAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
cdrecord: CUE sheet not accepted. Retrying with minimum pregapsize = 1.
Errno: 5 (Input/output error), send_cue_sheet scsi sendcmd: no error
CDB:  5D 00 00 00 00 00 00 00 20 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 5D 34 02 90 26 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 32
cmd finished after 0.003s timeout 200s
cdrecord: CUE sheet still not accepted. Please try to write in RAW (-raw96r) mode.
cdrecord: Cannot send CUE sheet.
cdrecord: Could not write Lead-in.
Writing  time:    0.055s
chello062179069011:/home/zyzio/Desktop#
MMW
KDE
Lenovo S510 SFF (10KY000SPB)

Offline

 

#15  2006-12-19 12:17:12

  pk111 - Użytkownik

pk111
Użytkownik
Skąd: Raciążek
Zarejestrowany: 2005-07-20
Serwis

Re: problemy z nagrywaniem i DMA

dobrze ;)

Offline

 

#16  2006-12-19 12:21:26

  pk111 - Użytkownik

pk111
Użytkownik
Skąd: Raciążek
Zarejestrowany: 2005-07-20
Serwis

Re: problemy z nagrywaniem i DMA

Kod:

cdrecord -v -dao driveropts=burnfree dev=/dev/scd0 Vipassana.pdf

a gdzie opcja multi?

Offline

 

#17  2006-12-19 12:32:19

  MMW - Użytkownik

MMW
Użytkownik
Skąd: Warszawa
Zarejestrowany: 2006-03-09
Serwis

Re: problemy z nagrywaniem i DMA

Nic nie działa :-(

Kod:

chello062179069011:/home/zyzio# cdrecord -v -dao -multi driveropts=burnfree dev=/dev/scd0 Vipassana.pdf
TOC Type: 3 = CD-ROM XA mode 2
scsidev: '/dev/scd0'
devname: '/dev/scd0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Driveropts: 'burnfree'
SCSI buffer size: 64512
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identification : 'DVDRAM GSA-4167B'
Revision       : 'DL13'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x0012
Profile: 0x0011
Profile: 0x0015
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B
Profile: 0x002B
Profile: 0x0010
Profile: 0x0009
Profile: 0x000A (current)
Profile: 0x0008 (current)
Profile: 0x0002
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Drive DMA Speed: 9986 kB/s 56x CD 7x DVD
FIFO size      : 4194304 = 4096 KB
cdrecord: No such file or directory. Cannot open 'Vipassana.pdf'.
chello062179069011:/home/zyzio# ls
Desktop  Firefox_wallpaper.png  sesja1.rtf  sesja2.rtf  sesja3.rtf
chello062179069011:/home/zyzio# cd Desktop
chello062179069011:/home/zyzio/Desktop# ls
dsl-3.1.iso                 gnome-terminal.desktop  trash.desktop
frobate-0046b11d42.desktop  kaffeine.desktop        Vipassana.pdf
gksu.desktop                synaptic-kde.desktop
chello062179069011:/home/zyzio/Desktop# cdrecord -v -dao -multi driveropts=burnfree dev=/dev/scd0 Vipassana.pdf
TOC Type: 3 = CD-ROM XA mode 2
scsidev: '/dev/scd0'
devname: '/dev/scd0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Driveropts: 'burnfree'
SCSI buffer size: 64512
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identification : 'DVDRAM GSA-4167B'
Revision       : 'DL13'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x0012
Profile: 0x0011
Profile: 0x0015
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B
Profile: 0x002B
Profile: 0x0010
Profile: 0x0009
Profile: 0x000A (current)
Profile: 0x0008 (current)
Profile: 0x0002
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Drive DMA Speed: 10001 kB/s 56x CD 7x DVD
FIFO size      : 4194304 = 4096 KB
Track 01: data     0 MB
Total size:        0 MB (00:05.30) = 398 sectors
Lout start:        1 MB (00:07/23) = 398 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 2
  Reference speed: 6
  Is not unrestricted
  Is erasable
  Disk sub type: High speed Rewritable (CAV) media (1)
  ATIP start of lead in:  -11077 (97:34/23)
  ATIP start of lead out: 359849 (79:59/74)
  1T speed low:  4 1T speed high: 10
  2T speed low:  2 2T speed high: 10
  power mult factor: 2 6
  recommended erase/write power: 5
  A1 values: 24 2C DC
  A2 values: 14 A4 4A
  A3 values: 04 C4 80
Disk type:    Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 359849 Blocks current: 326549 Blocks remaining: 326151
Speed set to 1764 KB/s
Starting to write CD/DVD at speed  10.0 in real SAO mode for multi session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
cdrecord: CUE sheet not accepted. Retrying with minimum pregapsize = 1.
Errno: 5 (Input/output error), send_cue_sheet scsi sendcmd: no error
CDB:  5D 00 00 00 00 00 00 00 20 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 5D 34 02 90 26 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 32
cmd finished after 0.003s timeout 200s
cdrecord: CUE sheet still not accepted. Please try to write in RAW (-raw96r) mode.
cdrecord: Cannot send CUE sheet.
cdrecord: Could not write Lead-in.
Writing  time:    0.056s
chello062179069011:/home/zyzio/Desktop# cdrecord -v -raw96r -multi driveropts=burnfree dev=/dev/scd0 Vipassana.pdf
TOC Type: 3 = CD-ROM XA mode 2
scsidev: '/dev/scd0'
devname: '/dev/scd0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Driveropts: 'burnfree'
SCSI buffer size: 64512
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identification : 'DVDRAM GSA-4167B'
Revision       : 'DL13'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x0012
Profile: 0x0011
Profile: 0x0015
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B
Profile: 0x002B
Profile: 0x0010
Profile: 0x0009
Profile: 0x000A (current)
Profile: 0x0008 (current)
Profile: 0x0002
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Drive DMA Speed: 14147 kB/s 80x CD 10x DVD
FIFO size      : 4194304 = 4096 KB
Encoding speed : 344x (25759 sectors/s) for libedc from Heiko Ei�feldt
Track 01: data     0 MB
Total size:        0 MB (00:05.30) = 398 sectors
Lout start:        1 MB (00:07/23) = 398 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 2
  Reference speed: 6
  Is not unrestricted
  Is erasable
  Disk sub type: High speed Rewritable (CAV) media (1)
  ATIP start of lead in:  -11077 (97:34/23)
  ATIP start of lead out: 359849 (79:59/74)
  1T speed low:  4 1T speed high: 10
  2T speed low:  2 2T speed high: 10
  power mult factor: 2 6
  recommended erase/write power: 5
  A1 values: 24 2C DC
  A2 values: 14 A4 4A
  A3 values: 04 C4 80
Disk type:    Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 359849 Blocks current: 326549 Blocks remaining: 326151
Speed set to 1764 KB/s
Starting to write CD/DVD at speed  10.0 in real RAW/RAW96R mode for multi session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
cdrecord: WARNING: Drive returns wrong startsec (33300) using 0 from ATIP
cdrecord: Illegal startsec (0)
cdrecord: Could not write Lead-in.
Writing  time:    0.050s
chello062179069011:/home/zyzio/Desktop#

Trudno, do wypalania będzie Winda - i tak wypalam jedynie okazjonalnie.

MMW
KDE
Lenovo S510 SFF (10KY000SPB)

Offline

 

#18  2006-12-19 12:54:52

  pk111 - Użytkownik

pk111
Użytkownik
Skąd: Raciążek
Zarejestrowany: 2005-07-20
Serwis

Re: problemy z nagrywaniem i DMA

[url]http://unix.manuale.pl/man/strona/cdrecord,307[/url]
[url]http://www.google.pl/search?hl=pl&q=cdrecord+nagrywanie&btnG=Szukaj+w+Google&lr=[/url]

Offline

 

#19  2006-12-19 13:30:28

  MMW - Użytkownik

MMW
Użytkownik
Skąd: Warszawa
Zarejestrowany: 2006-03-09
Serwis

Re: problemy z nagrywaniem i DMA

Wszystko na nic :-(

Kod:

chello062179069011:/home/zyzio/Desktop# cdrecord -multi -v -dao driveropts=burnfree dev=1,0,0 Vipassana.iso
TOC Type: 3 = CD-ROM XA mode 2
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.34
Driveropts: 'burnfree'
SCSI buffer size: 64512
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identification : 'DVDRAM GSA-4167B'
Revision       : 'DL13'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x0012
Profile: 0x0011
Profile: 0x0015
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B
Profile: 0x002B
Profile: 0x0010
Profile: 0x0009
Profile: 0x000A (current)
Profile: 0x0008
Profile: 0x0002
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Drive DMA Speed: 13755 kB/s 78x CD 9x DVD
FIFO size      : 4194304 = 4096 KB
Track 01: data     1 MB
Total size:        1 MB (00:07.72) = 579 sectors
Lout start:        1 MB (00:09/54) = 579 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 2
  Reference speed: 6
  Is not unrestricted
  Is erasable
  Disk sub type: High speed Rewritable (CAV) media (1)
  ATIP start of lead in:  -11077 (97:34/23)
  ATIP start of lead out: 359849 (79:59/74)
  1T speed low:  4 1T speed high: 10
  2T speed low:  2 2T speed high: 10
  power mult factor: 2 6
  recommended erase/write power: 5
  A1 values: 24 2C DC
  A2 values: 14 A4 4A
  A3 values: 04 C4 80
Disk type:    Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 359270
Speed set to 1764 KB/s
Starting to write CD/DVD at speed  10.0 in real SAO mode for multi session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Writing pregap for track 1 at -150
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 FF FF FF 6A 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 72 0B 00 00 00 00 00 0E 09 0E 00 00 00 03 00 00
Sense Key: 0x0 No Additional Sense, Segment 11
Sense Code: 0x00 Qual 0x03 (setmark detected) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 230.487s timeout 200s
write track pad data: error after 0 bytes
BFree: 1029 K BSize: 1029 K
Starting new track at sector: 0
Track 01:    0 of    1 MB written.Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 71 00 03 00 00 00 00 10 34 43 04 90 0C 00 00 00
Sense Key: 0x3 Medium Error, deferred error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 0.398s timeout 200s

write track data: error after 0 bytes
cdrecord: A write error occured.
cdrecord: Please properly read the error message above.
Writing  time:  272.565s
Average write speed   0.0x.
Fixating...
Fixating time:    0.004s
chello062179069011:/home/zyzio/Desktop#

Echhh.........

MMW
KDE
Lenovo S510 SFF (10KY000SPB)

Offline

 

#20  2006-12-19 15:17:16

  pk111 - Użytkownik

pk111
Użytkownik
Skąd: Raciążek
Zarejestrowany: 2005-07-20
Serwis

Re: problemy z nagrywaniem i DMA

odnośnie tego 3 posta od końca to obawiam się ,że nawet winda Ci tego pdf'a nie wypali;)

Offline

 

#21  2006-12-19 15:27:46

  MMW - Użytkownik

MMW
Użytkownik
Skąd: Warszawa
Zarejestrowany: 2006-03-09
Serwis

Re: problemy z nagrywaniem i DMA

Trudno - winda oryginalna, niech się na coś przydaje. I tak praktycznie wcale nie wypalam, ale po prostu wkurza mnie jak coś nie działa ;-)

MMW
KDE
Lenovo S510 SFF (10KY000SPB)

Offline

 

#22  2006-12-20 00:14:55

  bercik - Moderator Mamut

bercik
Moderator Mamut
Skąd: Warszawa
Zarejestrowany: 2006-09-23
Serwis

Re: problemy z nagrywaniem i DMA

komenda ktora dzialala brzmiala:

cdrecord -v -dao driveropts=burnfree dev=/dev/scd0 dsl-3.1.iso[/quote]
zatem w k3b sproboj ustawic takie same opcje:
- w ustawieniach nagrywania plyty tryb zapisu DAO oraz program nagrywajacy cdrecord
- a burnfree wlacz w "konfiguracja k3b" -> nagrywanie

"Wszyscy wiedzą, że czegoś zrobić nie można. Ale przypadkowo znajduje się jakiś nieuk, który tego nie wie. I on właśnie robi odkrycie." (A.Einstein)

Offline

 

#23  2006-12-20 12:31:33

  MMW - Użytkownik

MMW
Użytkownik
Skąd: Warszawa
Zarejestrowany: 2006-03-09
Serwis

Re: problemy z nagrywaniem i DMA

Nic nie daje :-(

Kod:

System
-----------------------
K3b Version: 0.12.17

KDE Version: 3.5.5
QT Version:  3.3.7
Kernel:      2.6.18-3-686
Devices
-----------------------
HL-DT-ST DVDRAM GSA-4167B DL13 (/dev/scd0, /dev/sg1) at /media/cdrom0 [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD-R dwuwarstwowa; DVD+R; DVD+RW; DVD+R dwuwarstwowa] [DVD-ROM; DVD-R sekwencyjna; DVD-R dwuwarstwowa sekwencyjna; DVD-RAM; DVD-RW w trybie ograniczonego zastępowania; DVD-RW sekwencyjny; DVD+RW; DVD+R; DVD+R dwuwarstwowa; CD-ROM; CD-R; CD-RW] [Sesja naraz (SAO); TAO; RAW; SAO/R96P; SAO/R96R; Surowe/R16; Surowe/R96P; Surowe/R96R; Ograniczone zastępowanie]

Used versions
-----------------------
cdrecord: 2.1.1a03

cdrecord
-----------------------
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.34
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'HL-DT-ST'
Identification : 'DVDRAM GSA-4167B'
Revision       : 'DL13'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A
Profile: 0x0012 
Profile: 0x0011 
Profile: 0x0015 
Profile: 0x0014 
Profile: 0x0013 
Profile: 0x001A 
Profile: 0x001B 
Profile: 0x002B 
Profile: 0x0010 
Profile: 0x0009 
Profile: 0x000A (current)
Profile: 0x0008 
Profile: 0x0002 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 13903 kB/s 78x CD 10x DVD
FIFO size      : 4194304 = 4096 KB
Track 01: data     0 MB         padsize:   86 KB
Total size:        0 MB (00:04.00) = 300 sectors
Lout start:        1 MB (00:06/00) = 300 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 2
  Reference speed: 6
  Is not unrestricted
  Is erasable
  Disk sub type: High speed Rewritable (CAV) media (1)
  ATIP start of lead in:  -11077 (97:34/23)
  ATIP start of lead out: 359849 (79:59/74)
  1T speed low:  4 1T speed high: 10
  2T speed low:  2 2T speed high: 10
  power mult factor: 2 6
  recommended erase/write power: 5
  A1 values: 24 2C DC
  A2 values: 14 A4 4A
  A3 values: 04 C4 80
Disk type:    Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 359549
Speed set to 1764 KB/s
Starting to write CD/DVD at speed  10.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 FF FF FF 6A 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 90 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid) 
resid: 63488
cmd finished after 0.002s timeout 200s
Writing pregap for track 1 at -150
write track pad data: error after 0 bytes
BFree: 1029 K BSize: 1029 K
Starting new track at sector: 0
Track 01:    0 of    0 MB written.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 90 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0
Sense flags: Blk 0 (not valid) 
resid: 63488
cmd finished after 0.007s timeout 200s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 0 bytes
Writing  time:   32.906s
Average write speed   0.1x.
Fixating...
Fixating time:    0.005s

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=1,0,0 speed=10 -dao driveropts=burnfree -eject -data /tmp/kde-zyzio/k3b_image.iso 

mkisofs
-----------------------
I: -input-charset not specified, using utf-8 (detected in locale settings)
Total translation table size: 0
Total rockridge attributes bytes: 253
Total directory bytes: 0
Path table size(bytes): 10
Max brk space used 0
257 extents written (0 MB)

mkisofs command:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid K3b data project -volset  -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher  -preparer  -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-zyzio/k3bmL1u7b.tmp -rational-rock -hide-list /tmp/kde-zyzio/k3bfETYyb.tmp -joliet -hide-joliet-list /tmp/kde-zyzio/k3b5M1Uha.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-zyzio/k3b1fCFja.tmp
MMW
KDE
Lenovo S510 SFF (10KY000SPB)

Offline

 

 

Strony: 1

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Możesz wyłączyć AdBlock — tu nie ma reklam ;-)

[ Generated in 0.014 seconds, 11 queries executed ]

Informacje debugowania

Time (s) Query
0.00015 SET CHARSET latin2
0.00007 SET NAMES latin2
0.00147 SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.145.96.78' WHERE u.id=1
0.00104 REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '3.145.96.78', 1738389803)
0.00077 SELECT * FROM punbb_online WHERE logged<1738389503
0.00055 SELECT topic_id FROM punbb_posts WHERE id=47278
0.00006 SELECT id FROM punbb_posts WHERE topic_id=6181 ORDER BY posted
0.00068 SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=6181 AND t.moved_to IS NULL
0.00021 SELECT search_for, replace_with FROM punbb_censoring
0.00204 SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=6181 ORDER BY p.id LIMIT 0,25
0.00149 UPDATE punbb_topics SET num_views=num_views+1 WHERE id=6181
Total query time: 0.00853 s