Forum Debian Users Gang

wmaster123 · 2009-09-18 02:22:22

Witam,

Długo cieszyłem się bardzo dobrym sprawowaniem się mojego Debianka, jednak po ostatnim upgradzie pakietów zaczęły się same problemy. Najpierw przy upgradzie kde do 4.x wystąpił błąd zależności pakietów i przez pakiet tracer(?) (który zdaje się, że w nowym kde został wycofany) który potrzebował starszej wersji jakiegoś innego pakietu (kdebase) doprowadził ostatecznie do niezainstalowania się kde i braku X-ów.

Trochę lekkomyślnie stwierdziłem, że może błąd leży w Xorg-u, więc usunąłem ten pakiet i zainstalowałem od nowa. I tu zaczęły się już większe schody. Najpierw po restarcie i próbie uruchomienia X-ów - startx wyskoczył błąd o braku sterownika fglrx. Poszperałem troche w necie i zainstalowałem ten sterownik. Jednak X-y nadal nie chodzą.

Instalację fglrx robiłem według tej strony [url=http://wiki.cchtml.com/index.php/Debian_Installation_Guide]http://wiki.cchtml.com/index.php/Debian_Installation_Guide[/url]. Nie wiem jednak czy wszystko poszło ok, ponieważ po restarcie i wpisaniu aticonfig --initial otrzytmałem taki error:

Kod:

aticonfig: No supported adapters detected

Załączam logi, oraz konfigurację xorg.conf

Kod:

X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30.4-dsa-ia32 i686 Debian
Current Operating System: Linux ruczaj 2.6.26-2-486 #1 Wed Aug 19 05:40:02 UTC 2009 i686
Build Date: 06 August 2009  04:49:57PM
xorg-server 2:1.6.3-1+b1 (buildd@murphy.debian.org) 
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 18 01:53:17 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "aticonfig-Screen[0]-0" (0)
(**) |   |-->Monitor "aticonfig-Monitor[0]-0"
(**) |   |-->Device "aticonfig-Device[0]-0"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    Entry deleted from font path.
(**) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi:unscaled,
    /usr/share/fonts/X11/75dpi:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/local/share/fonts,
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Generic Keyboard
(WW) Disabling Configured Mouse
(II) Loader magic: 0x6c0
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0:1:0:0) 1002:5b63:174b:1490 ATI Technologies Inc RV370 [Sapphire X550 Silent] rev 0, Mem @ 0xc0000000/268435456, 0xd1000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [5] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [6] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [7] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [8] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [9] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [10] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [11] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [12] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [13] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [14] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [15] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [16] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [17] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [18] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [19] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [20] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [21] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [22] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [23] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 7.4.0, module version = 1.0.0
(II) Loading extension XFree86-DRI
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.4.99.906, module version = 8.65.4
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
    compiled for 7.4.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.1.0
    ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.4.99.906, module version = 8.65.4
    Module class: X.Org Video Driver
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) ATI Proprietary Linux Driver Version Identifier:8.65.4
(II) ATI Proprietary Linux Driver Release Identifier: 8.65                                 
(II) ATI Proprietary Linux Driver Build Date: Aug 13 2009 21:15:30
(II) Loading PCS database from /etc/ati/amdpcsdb
(EE) No devices detected.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support 
     at http://wiki.x.org
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

xorg.conf

Kod:

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen      0  "aticonfig-Screen[0]-0" 0 0
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
EndSection

Section "Files"

    # path to defoma fonts
    FontPath     "/usr/share/fonts/X11/misc"
    FontPath     "/usr/share/fonts/X11/100dpi:unscaled"
    FontPath     "/usr/share/fonts/X11/75dpi:unscaled"
    FontPath     "/usr/share/fonts/X11/Type1"
    FontPath     "/usr/local/share/fonts"
EndSection

Section "Module"
    Load  "i2c"
    Load  "bitmap"
    Load  "ddc"
    Load  "dri"
    Load  "extmod"
    Load  "freetype"
    Load  "glx"
    Load  "int10"
    Load  "vbe"
EndSection

Section "InputDevice"
    Identifier  "Generic Keyboard"
    Driver      "kbd"
    Option        "CoreKeyboard"
    Option        "XkbRules" "xorg"
    Option        "XkbModel" "pc105"
    Option        "XkbLayout" "pl"
EndSection

Section "InputDevice"
    Identifier  "Configured Mouse"
    Driver      "mouse"
    Option        "CorePointer"
    Option        "Device" "/dev/input/mice"
    Option        "Protocol" "ImPS/2"
    Option        "Emulate3Buttons" "true"
EndSection

Section "Monitor"
    Identifier   "Generic Monitor"
    HorizSync    28.0 - 64.0
    VertRefresh  43.0 - 60.0
    Option        "DPMS"
EndSection

Section "Monitor"
    Identifier   "aticonfig-Monitor[0]-0"
    Option        "VendorName" "ATI Proprietary Driver"
    Option        "ModelName" "Generic Autodetecting Monitor"
    Option        "DPMS" "true"
EndSection

Section "Device"
    Identifier  "Generic Video Card"
    Driver      "vesa"
    BusID       "PCI:1:0:0"
EndSection

Section "Device"
    Identifier  "aticonfig-Device[0]-0"
    Driver      "fglrx"
    BusID       "PCI:1:0:0"
EndSection

Section "Screen"
    Identifier "Default Screen"
    Device     "Generic Video Card"
    Monitor    "Generic Monitor"
    DefaultDepth     24
    SubSection "Display"
        Depth     1
        Modes    "1280x1024"
    EndSubSection
    SubSection "Display"
        Depth     4
        Modes    "1280x1024"
    EndSubSection
    SubSection "Display"
        Depth     8
        Modes    "1280x1024"
    EndSubSection
    SubSection "Display"
        Depth     15
        Modes    "1280x1024"
    EndSubSection
    SubSection "Display"
        Depth     16
        Modes    "1280x1024"
    EndSubSection
    SubSection "Display"
        Depth     24
        Modes    "1280x1024"
    EndSubSection
EndSection

Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device     "aticonfig-Device[0]-0"
    Monitor    "aticonfig-Monitor[0]-0"
    DefaultDepth     24
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Section "DRI"
    Mode         0666
EndSection

ilin · 2009-09-18 07:55:36

Sprobuj wygenerować nowy xorg.conf za pomoca

Kod:

X -configure

Jeśli to squeeze to xy powinny wstać nawet bez pliku /etc/X11/xorg.conf

NIC · 2009-09-18 09:39:02

Nowy Xserver 1.6.3, stare fglrx (8.65.4) i to dla xservera 1.4.99 (to jest 1.5 lub 1.6?)... hmm.. ale skoro nie kłóci się o ABI to chyba OK. Mimo to jednak chyba powinieneś rozważyć instalację najnowszej wersji fglrx lub sterownika wolnościowego, prawdopodobnie "radeonhd" lub ostatecznie "ati".

Całą sekcję "Module" możesz wsadzić za kratki, nie jest niezbędna. I do sekcji ServerLayout doklej
Option "AllowEmptyInput" "off"

I sekcji Screen (tej drugiej, konkretnie sekcja Display) doklej:
Modes "1280x1024"
Bo może ten sterownik nie jest taki mądry i sam sobie nie ustawi niczego.

PS.
SubSection "Display"
Depth 1
Modes "1280x1024"
EndSubSection

Po kiego bita to? Ktoś kiedyś używał 1-bitowej głębi ekranu :D Wystarczy tylko sobie zostawić 8, 16, 24 bity a i tak 24 bity tylko by wystarczyły.

wmaster123 · 2009-09-18 11:51:16

Wygenerowałem nowego xorg.conf przy pomocy

Kod:

X -configure

Przy generowaniu wszystko ok -> logi:

Kod:

X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30.4-dsa-ia32 i686 Debian
Current Operating System: Linux ruczaj 2.6.26-2-486 #1 Wed Aug 19 05:40:02 UTC 2009 i686
Build Date: 06 August 2009  04:49:57PM
xorg-server 2:1.6.3-1+b1 (buildd@murphy.debian.org) 
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 18 11:22:54 2009
List of video drivers:
    mga
    ati
    radeonhd
    cirrus
    glint
    tdfx
    i740
    sisusb
    tseng
    savage
    nv
    radeon
    neomagic
    mach64
    fglrx
    r128
    trident
    v4l
    voodoo
    vmware
    i128
    s3virge
    openchrome
    apm
    tga
    sis
    chips
    siliconmotion
    s3
    rendition
    dummy
    intel
    ark
    fbdev
    vesa
(++) Using config file: "/root/xorg.conf.new"


Xorg detected your mouse at device /dev/input/mice.
Please check your config if the mouse is still not
operational, as by default Xorg tries to autodetect
the protocol.

Your xorg.conf file is /root/xorg.conf.new

To test the server, run 'X -config /root/xorg.conf.new'

Następnie próbowałem odpalić z nowym configiem xy, ale już się nie udało

Kod:

X -config /root/xorg.conf.new

logi:

Kod:

X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30.4-dsa-ia32 i686 Debian
Current Operating System: Linux ruczaj 2.6.26-2-486 #1 Wed Aug 19 05:40:02 UTC 2009 i686
Build Date: 06 August 2009  04:49:57PM
xorg-server 2:1.6.3-1+b1 (buildd@murphy.debian.org) 
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 18 11:24:19 2009
(++) Using config file: "/root/xorg.conf.new"
(EE) Failed to load module "fgl.renamed.libdri" (module does not exist, 0)
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed to open the DRM
[dri] Disabling DRI.
NTSC PAL 
  XRANDR name: VGA-0
  Connector: VGA
  CRT1: INTERNAL_DAC1
  DDC reg: 0x60
  XRANDR name: DVI-0
  Connector: DVI-I
  CRT2: INTERNAL_DAC2
  DFP1: INTERNAL_TMDS1
  DDC reg: 0x64
  XRANDR name: S-video
  Connector: S-video
  TV1: INTERNAL_DAC2
  DDC reg: 0x0
finished output detect: 0
finished output detect: 1
finished output detect: 2
finished all detect
before xf86InitialConfiguration
after xf86InitialConfiguration
Entering TV Save
Save TV timing tables
saveTimingTables: reading timing tables
TV Save done
disable FP1
disable primary dac
disable FP1
disable TV
disable FP1
init memmap
init common
init crtc1
init pll1
freq: 108000000
best_freq: 108000000
best_feedback_div: 16
best_ref_div: 2
best_post_div: 2
restore memmap
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set FP1
enable FP1
disable primary dac
disable TV
(EE) GLX error: Can not get required symbols.
SELinux: Disabled on system, not enabling in X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
>                   Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
disable FP1
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
disable primary dac
disable FP1
disable TV
disable FP1
init memmap
init common
init crtc1
init pll1
freq: 108000000
best_freq: 108000000
best_feedback_div: 16
best_ref_div: 2
best_post_div: 2
restore memmap
restore common
restore crtc1
restore pll1
finished PLL1
set RMX
set FP1
enable FP1
disable primary dac
disable TV
disable FP1
finished PLL2
finished PLL1
Entering Restore TV
Restore TV PLL
Restore TVHV
Restore TV Restarts
Restore Timing Tables
Restore TV standard
Leaving Restore TV
error setting MTRR (base = 0xc0000000, size = 0x10000000, type = 1) Invalid argument (22)

Porobiłem również zmiany w starym xorg.conf, według zaleceń ale skutek ten sam:

Kod:

X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30.4-dsa-ia32 i686 Debian
Current Operating System: Linux ruczaj 2.6.26-2-486 #1 Wed Aug 19 05:40:02 UTC 2009 i686
Build Date: 06 August 2009  04:49:57PM
xorg-server 2:1.6.3-1+b1 (buildd@murphy.debian.org) 
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 18 11:44:20 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "aticonfig-Screen[0]-0" (0)
(**) |   |-->Monitor "aticonfig-Monitor[0]-0"
(**) |   |-->Device "aticonfig-Device[0]-0"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(**) Option "AllowEmptyInput" "off"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    Entry deleted from font path.
(**) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi:unscaled,
    /usr/share/fonts/X11/75dpi:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/local/share/fonts,
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0x6c0
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7

(--) PCI:*(0:1:0:0) 1002:5b63:174b:1490 ATI Technologies Inc RV370 [Sapphire X550 Silent] rev 0, Mem @ 0xc0000000/268435456, 0xd1000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
    [0] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [5] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [6] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [7] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [8] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [9] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [10] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [11] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [12] -1    0    0xffffffff - 0xffffffff (0x1) MX[b]
    [13] -1    0    0x000f0000 - 0x000fffff (0x10000) MX[b]
    [14] -1    0    0x000c0000 - 0x000effff (0x30000) MX[b]
    [15] -1    0    0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [16] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [17] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [18] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [19] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [20] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [21] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
    [22] -1    0    0x0000ffff - 0x0000ffff (0x1) IX[b]
    [23] -1    0    0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
    compiled for 7.4.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 7.4.0, module version = 1.0.0
(II) Loading extension XFree86-DRI
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.4.99.906, module version = 8.65.4
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    compiled for 1.4.99.906, module version = 8.65.4
    Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.6.3, module version = 1.4.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) ATI Proprietary Linux Driver Version Identifier:8.65.4
(II) ATI Proprietary Linux Driver Release Identifier: 8.65                                 
(II) ATI Proprietary Linux Driver Build Date: Aug 13 2009 21:15:30
(II) Loading PCS database from /etc/ati/amdpcsdb
(EE) No devices detected.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support 
     at http://wiki.x.org
 for help. 
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

Co do nowych sterowników, sprzęt mam niezbyt nowy, wiec nie wiem czy radeonhd bedzie dla mnie dobry

Kod:

lspci -v

Kod:

00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
    Subsystem: ASUSTeK Computer Inc. A8N-E Mainboard
    Flags: bus master, 66MHz, fast devsel, latency 0
    Capabilities: [44] HyperTransport: Slave or Primary Interface
    Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed-

00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
    Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard
    Flags: bus master, 66MHz, fast devsel, latency 0

00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
    Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard
    Flags: 66MHz, fast devsel, IRQ 255
    I/O ports at e000 [size=32]
    I/O ports at 4c00 [size=64]
    I/O ports at 4c40 [size=64]
    Capabilities: [44] Power Management version 2
    Kernel driver in use: nForce2_smbus

00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) (prog-if 10 [OHCI])
    Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard
    Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
    Memory at d2003000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [44] Power Management version 2
    Kernel driver in use: ohci_hcd

00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3) (prog-if 20 [EHCI])
    Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard
    Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
    Memory at d2004000 (32-bit, non-prefetchable) [size=256]
    Capabilities: [44] Debug port: BAR=1 offset=0098
    Capabilities: [80] Power Management version 2
    Kernel driver in use: ehci_hcd

00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2)
    Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard
    Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
    I/O ports at d800 [size=256]
    I/O ports at dc00 [size=256]
    Memory at d2002000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [44] Power Management version 2
    Kernel driver in use: Intel ICH

00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2) (prog-if 8a [Master SecP PriP])
    Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard
    Flags: bus master, 66MHz, fast devsel, latency 0
    [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
    [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
    [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
    [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
    I/O ports at f000 [size=16]
    Capabilities: [44] Power Management version 2
    Kernel driver in use: AMD_IDE

00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO])
    Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard
    Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
    I/O ports at 09e0 [size=8]
    I/O ports at 0be0 [size=4]
    I/O ports at 0960 [size=8]
    I/O ports at 0b60 [size=4]
    I/O ports at d400 [size=16]
    Memory at d2001000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: [44] Power Management version 2
    Kernel driver in use: sata_nv

00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode])
    Flags: bus master, 66MHz, fast devsel, latency 0
    Bus: primary=00, secondary=05, subordinate=05, sec-latency=128

00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
    Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard
    Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
    Memory at d2000000 (32-bit, non-prefetchable) [size=4K]
    I/O ports at c000 [size=8]
    Capabilities: [44] Power Management version 2
    Kernel driver in use: forcedeth

00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
    Capabilities: [40] Power Management version 2
    Capabilities: [48] MSI: Enable+ Count=1/2 Maskable- 64bit+
    Capabilities: [58] HyperTransport: MSI Mapping Enable+ Fixed-
    Capabilities: [80] Express Root Port (Slot+), MSI 00
    Capabilities: [100] Virtual Channel <?>
    Kernel driver in use: pcieport-driver

00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
    Capabilities: [40] Power Management version 2
    Capabilities: [48] MSI: Enable+ Count=1/2 Maskable- 64bit+
    Capabilities: [58] HyperTransport: MSI Mapping Enable+ Fixed-
    Capabilities: [80] Express Root Port (Slot+), MSI 00
    Capabilities: [100] Virtual Channel <?>
    Kernel driver in use: pcieport-driver

00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    Capabilities: [40] Power Management version 2
    Capabilities: [48] MSI: Enable+ Count=1/2 Maskable- 64bit+
    Capabilities: [58] HyperTransport: MSI Mapping Enable+ Fixed-
    Capabilities: [80] Express Root Port (Slot+), MSI 00
    Capabilities: [100] Virtual Channel <?>
    Kernel driver in use: pcieport-driver

00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 0000b000-0000bfff
    Memory behind bridge: d0000000-d1ffffff
    Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
    Capabilities: [40] Power Management version 2
    Capabilities: [48] MSI: Enable+ Count=1/2 Maskable- 64bit+
    Capabilities: [58] HyperTransport: MSI Mapping Enable+ Fixed-
    Capabilities: [80] Express Root Port (Slot+), MSI 00
    Capabilities: [100] Virtual Channel <?>
    Kernel driver in use: pcieport-driver

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
    Flags: fast devsel
    Capabilities: [80] HyperTransport: Host or Secondary Interface

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
    Flags: fast devsel

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
    Flags: fast devsel

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
    Flags: fast devsel
    Kernel driver in use: k8temp

01:00.0 VGA compatible controller: ATI Technologies Inc RV370 [Sapphire X550 Silent] (prog-if 00 [VGA controller])
    Subsystem: PC Partner Limited Device 1490
    Flags: bus master, fast devsel, latency 0, IRQ 18
    Memory at c0000000 (32-bit, prefetchable) [size=256M]
    I/O ports at b000 [size=256]
    Memory at d1000000 (32-bit, non-prefetchable) [size=64K]
    Expansion ROM at d0000000 [disabled] [size=128K]
    Capabilities: [50] Power Management version 2
    Capabilities: [58] Express Endpoint, MSI 00
    Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit+
    Capabilities: [100] Advanced Error Reporting

01:00.1 Display controller: ATI Technologies Inc RV370 secondary [Sapphire X550 Silent]
    Subsystem: PC Partner Limited Device 1491
    Flags: fast devsel
    Memory at d1010000 (32-bit, non-prefetchable) [disabled] [size=64K]
    Capabilities: [50] Power Management version 2
    Capabilities: [58] Express Endpoint, MSI 00

wmaster123 · 2009-09-18 12:40:25

Wreszcie jakoś udało mi się postawić te xy. Pomogło zainstalowanie "otwartych" sterowników -> [url]http://debian.linux.pl/viewtopic.php?t=952[/url].

Teraz idę się bawić w update kde do nowszej wersji :)

Jusko · 2009-09-18 12:56:56

Jeśli [b]RV370[/b] to oznaczenie chipsetu, o jaki oparty jest Twoja karta, to raczej sterowniki RadeonHd odpadają, gdyż:

radeonhd - The Driver for AMD GPG [b]r5xx/r6xx/r7xx[/b] Chipsets[/quote]
W takim przypadku lepiej użyć sterowników Radeon z repo:
xserver-xorg-video-radeon - X.Org X server — ATI Radeon display driver[/quote]
Zainstaluj je, dopisz w sekcji "Device" do Driver i zobacz.

Mam dla Ciebie ostatnią nowinę. Karta Twoja została przeniesiona do Legacy. Oznacza to, że sterowniki przestały być rozwijane - również dla Windows, Linux nie jest tu osamotniony. Więc - jeśli używasz Testinga (Squeeze), to możesz już zapomnieć o sterownikach własnościowych (fglrx). Dlaczego? Sterowniki były dopasowane pod Xorg do wersji 7.3. W Testingu jest już 7.4, wraz z xserverem 1.6.x. Kernel też jest już 2.6.30.x. Krótko mówiąc oznacza to, że NIE zainstalujesz ich już poprawnie. Każda próba uruchomienia systemu na sterownikach własnościowych zakończy się crashem X-ów. W tym momencie zostają tylko już sterowniki otwarte. Aby nadal cieszyć się sterownikami zamkniętymi, używać musisz Debiana Lenny, Ubuntu 8.04 (wsparcie do 2011 roku) lub Minta w wersji bodajże 5. Karty wrzucone do Legacy masz tutaj: [url]http://support.amd.com/us/gpudownload/linux/Legacy/Pages/radeon_linux.aspx?type=2.4.1&product=2.4.1.3.20&lang=Engli[/url]sh

Wklej lub sprawdź sobie jeszcze dla pewności wynik polecenia:
Kod:
dpkg -l xserver-xorg | grep xserver
Jeśli wynik będzie taki jak u mnie:

ii xserver-xorg 1:7.4+4 the X.Org X server[/quote]
To wiemy już z pewnością, że tu jest pies pogrzebany. Podobny crash X-ów zaliczysz już z tymi sterownikami na każdej z obecnych już dystrybucji. ATi zachowało się bardzo brzydko, ale to nie nowość.

[b]EDIT:[/b]

Zostałem wyprzedzony przez autora :-P Zauważ tylko proszę, że data wpisu z owego forum jest z 2007-02-18 :-) Wystarczyło tylko doinstalować pakiet Radeon z repo i to wszystko na czasy obecne :-)

Ostatnio edytowany przez Jusko (2009-09-18 13:04:31)
Offline

Time (s)	Query
0.00009	SET CHARSET latin2
0.00004	SET NAMES latin2
0.00093	SELECT u., g., o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.225.255.196' WHERE u.id=1
0.00065	REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '18.225.255.196', 1732304926)
0.00046	SELECT * FROM punbb_online WHERE logged<1732304626
0.00085	DELETE FROM punbb_online WHERE ident='3.143.235.104'
0.00079	SELECT topic_id FROM punbb_posts WHERE id=128421
0.00005	SELECT id FROM punbb_posts WHERE topic_id=15026 ORDER BY posted
0.00077	SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=15026 AND t.moved_to IS NULL
0.00004	SELECT search_for, replace_with FROM punbb_censoring
0.00223	SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=15026 ORDER BY p.id LIMIT 0,25
0.00068	UPDATE punbb_topics SET num_views=num_views+1 WHERE id=15026
Total query time: 0.00758 s

Forum Debian Users Gang

Ogłoszenie

#1 2009-09-18 02:22:22

wmaster123 - Użytkownik

problem z xorg

Kod:

Kod:

Kod:

#2 2009-09-18 07:55:36

ilin - Palacz

Re: problem z xorg

Kod:

#3 2009-09-18 09:39:02

NIC - Członek DUG

Re: problem z xorg

#4 2009-09-18 11:51:16

wmaster123 - Użytkownik

Re: problem z xorg

Kod:

Kod:

Kod:

Kod:

Kod:

Kod:

Kod:

#5 2009-09-18 12:40:25

wmaster123 - Użytkownik

Re: problem z xorg

#6 2009-09-18 12:56:56

Jusko - Użytkownik

Re: problem z xorg

Kod:

Stopka forum

Informacje debugowania