Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

Strony: 1

 

#1  2010-08-03 20:56:47

  iacobus - Członek DUG

iacobus
Członek DUG
Zarejestrowany: 2009-06-02

Ubuntu wykrywa modem Huawei jedynie po restarcie z Debiana

Witam,
na wstępie przepraszam za dublowanie wątków, umieściłem ten wpis również na forum.ubuntu.pl, ponieważ dotyczy obu systemów.

Mam na dysku Debiana Squeeze z KDE oraz Ubuntu 10.04 (GNOME). Na Debianie bez żadnego problemu łączę się z siecią za pomocą modemu Huawei (Play Online). Na Ubuntu zostanie on wykryty jedynie wówczas, gdy najpierw zaloguję się na Debiana, uruchomię sieć, a później ponownie uruchomię komputer - z Ubuntu. Nie ma mowy o pomyłce, empirycznie sprawdzałem wiele razy.

Co więcej, w przeciwnym wypadku - gdy po prostu uruchomię Ubuntu, w katalogu /dev nie będę miał następujących wpisów:

jakub@jakub-lucid:/dev$ ls ttyU*
ttyUSB0 ttyUSB1 ttyUSB2

Jeżeli ktoś ma pomysł, o co może chodzić, będę wdzięczny za wskazówki :-)

Unix is user-friendly — it’s just choosy about who its friends are.

Offline

 

#2  2010-08-03 21:16:45

  winnetou - złodziej wirków ]:->

winnetou
złodziej wirków ]:->
Skąd: Jasło/Rzeszów kiedyś Gdańs
Zarejestrowany: 2008-03-31
Serwis

Re: Ubuntu wykrywa modem Huawei jedynie po restarcie z Debiana

A że się tak zapytam: co ma piernik do wiatraka? O ile mi wiadomo to urządzenia w /dev są tworzone podczas instalacji systemu oraz część jest tworzona podczas startu systemu... Może nie wstaje Ci jakiś daemon albo któryś z modułów startuje za późno. Jedyne co mi przychodzi do głowy to porównanie załadowanych modułów w obu systemach oraz porównanie rc-skryptów (w sensie czy takie same są odpalane)....

LRU: #472938
[b]napisz do mnie:[/b] ola@mojmail.eu
[url=http://valhalla.org.pl]Hołmpejdż[/url] | [url=http://valhalla.org.pl/foto]Galerie[/url] | [url=http://valhalla.org.pl/tech]"Twórczość"[/url] || [url=http://img.munn.in]Free Image Hosting[/url]

Offline

 

#3  2010-08-03 21:18:18

  iacobus - Członek DUG

iacobus
Członek DUG
Zarejestrowany: 2009-06-02

Re: Ubuntu wykrywa modem Huawei jedynie po restarcie z Debiana

Piernik do wiatraka ma to, że modem podłączam do /dev/ttyUSB0 . Jeżeli jest on nie wykryty w /dev, to nie mogę odpalić nawet prostego dialera, np. wvdial :-)

Unix is user-friendly — it’s just choosy about who its friends are.

Offline

 

#4  2010-08-03 21:26:09

  winnetou - złodziej wirków ]:->

winnetou
złodziej wirków ]:->
Skąd: Jasło/Rzeszów kiedyś Gdańs
Zarejestrowany: 2008-03-31
Serwis

Re: Ubuntu wykrywa modem Huawei jedynie po restarcie z Debiana

Bardziej chodziło mi o to co ma wspólnego /dev Debiana z /dev bubuntu ;) Bo co ma wspólnego modem z /dev to akurat się dowiedziałem z posta :)

LRU: #472938
[b]napisz do mnie:[/b] ola@mojmail.eu
[url=http://valhalla.org.pl]Hołmpejdż[/url] | [url=http://valhalla.org.pl/foto]Galerie[/url] | [url=http://valhalla.org.pl/tech]"Twórczość"[/url] || [url=http://img.munn.in]Free Image Hosting[/url]

Offline

 

#5  2010-08-03 21:26:26

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Ubuntu wykrywa modem Huawei jedynie po restarcie z Debiana

ID tego urządzenia są identyczne w debianie i ubuntu i w ubuntu jak działa i nie działa ?
No i dmesg w ubuntu coś mówi wtedy jak nie dziala ?

Dobrze abyś podał co to dokładnie za modem wtedy będziemy się zastanawiać co jest nie tak z nim w ubuntu.

[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]

Offline

 

#6  2010-08-03 21:36:21

  iacobus - Członek DUG

iacobus
Członek DUG
Zarejestrowany: 2009-06-02

Re: Ubuntu wykrywa modem Huawei jedynie po restarcie z Debiana

Modem według opakowania E1750c, wg lsusb:

Kod:

UBUNTU: Bus 001 Device 002: ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB Modem
DEBIAN: Bus 001 Device 002: ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB Modem

Zaczynając od Adama i Ewy: W Debianie łączę się bez kłopotów przez Network-Managera - modem jest normalnie wykrywany i działa w pełni sprawnie. W Ubuntu nie jest wykrywany, chyba że przed chwilą robiłem restart z Debiana. Wiem, że brzmi to głupio, ale kilka razy sprawdzałem empirycznie. Pomyślałem OK, olać gnomowego Network-Managera, będę się łączył przez wvdial. Ale okazuje się, że jeżeli po prostu uruchomię Ubuntu, to nie mam węzła /dev/ttyUSB0, który jest mi niezbędny do połączenia.

Ostatnio edytowany przez iacobus (2010-08-03 21:41:05)

Unix is user-friendly — it’s just choosy about who its friends are.

Offline

 

#7  2010-08-03 21:50:05

  Minio - Użyszkodnik

Minio
Użyszkodnik
Skąd: Brno, Česko
Zarejestrowany: 2007-12-22
Serwis

Re: Ubuntu wykrywa modem Huawei jedynie po restarcie z Debiana

Może Ubuntu na starcie nie tworzy odpowiedniego pliku urządzenia. Spróbuj po prostu uruchomić Ubuntu z wypiętym modemem i już po pełnym uruchomieniu systemu włożyć modem. Lub po pełnym uruchomieniu go wypiąć i wpiąć.

Debian widzi to urządzenie od pierwszego uruchomienia komputera? Bo może masz jakiś problem sprzętowy i porty USB są widoczne dla systemu dopiero po jakimś czasie od uruchomienia sprzętu.

Spinnen Essen: [url=http://fluxboxpl.org/portal/]FluxboxPL[/url] [url=http://przepis-na-lo.pl/]Przepis na LibreOffice[/url]

Offline

 

#8  2010-08-03 21:56:02

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Ubuntu wykrywa modem Huawei jedynie po restarcie z Debiana

Co mówi dmesg w ubuntu wtedy gdy modem nie działa.

Być moze modul trzeba z parametrem ladować.
Na jakim module to chodzi ?

Możesz wrzucić lsmod przy dzialającym połączeniu.

[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]

Offline

 

#9  2010-08-03 22:01:12

  iacobus - Członek DUG

iacobus
Członek DUG
Zarejestrowany: 2009-06-02

Re: Ubuntu wykrywa modem Huawei jedynie po restarcie z Debiana

W Debianie też nie działa od samego uruchomienia, tzn. po zalogowaniu muszę wyjąć i włożyć sprzęt. Na Ubuntu takie działanie nic nie daje.

Ubuntu, działające połączenie:

Kod:

jakub@jakub-lucid:~$ lsmod
Module                  Size  Used by
nls_utf8                1069  1 
isofs                  29250  1 
ppp_deflate             3682  0 
zlib_deflate           19568  1 ppp_deflate
bsd_comp                4811  0 
ppp_async               6734  1 
crc_ccitt               1339  1 ppp_async
via                    37920  0 
drm                   162377  1 via
ipt_REJECT              1928  1 
ipt_LOG                 4542  5 
binfmt_misc             6587  1 
ppdev                   5259  0 
xt_limit                1382  7 
xt_tcpudp               2011  7 
ipt_addrtype            1631  4 
xt_state                1098  7 
ip6table_filter         2343  1 
ip6_tables             11227  1 ip6table_filter
nf_nat_irc              1124  0 
nf_conntrack_irc        3332  1 nf_nat_irc
nf_nat_ftp              1836  0 
nf_nat                 15735  2 nf_nat_irc,nf_nat_ftp
nf_conntrack_ipv4      10672  9 nf_nat
nf_defrag_ipv4          1073  1 nf_conntrack_ipv4
nf_conntrack_ftp        5381  1 nf_nat_ftp
nf_conntrack           61583  7 xt_state,nf_nat_irc,nf_conntrack_irc,nf_nat_ftp,nf_nat,nf_conntrack_ipv4,nf_conntrack_ftp
iptable_filter          2271  1 
ip_tables               9991  1 iptable_filter
x_tables               14299  8 ipt_REJECT,ipt_LOG,xt_limit,xt_tcpudp,ipt_addrtype,xt_state,ip6_tables,ip_tables
arc4                    1153  2 
joydev                  8708  0 
snd_hda_codec_conexant    22641  1 
snd_hda_intel          21941  2 
snd_hda_codec          74201  2 snd_hda_codec_conexant,snd_hda_intel
snd_hwdep               5412  1 snd_hda_codec
snd_pcm_oss            35308  0 
snd_mixer_oss          13746  1 snd_pcm_oss
snd_pcm                70662  3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_seq_dummy           1338  0 
snd_seq_oss            26726  0 
snd_seq_midi            4557  0 
snd_rawmidi            19056  1 snd_seq_midi
snd_seq_midi_event      6003  2 snd_seq_oss,snd_seq_midi
snd_seq                47263  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              19098  2 snd_pcm,snd_seq
snd_seq_device          5700  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
fbcon                  35102  71 
tileblit                2031  1 fbcon
ath5k                 121792  0 
font                    7557  1 fbcon
bitblit                 4707  1 fbcon
snd                    54148  16 snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
softcursor              1189  1 bitblit
mac80211              205146  1 ath5k
soundcore               6620  1 snd
ath                     7611  1 ath5k
video                  17375  0 
vga16fb                11385  1 
snd_page_alloc          7076  2 snd_hda_intel,snd_pcm
vgastate                8961  1 vga16fb
option                 15654  1 
usbserial              33019  4 option
output                  1871  1 video
via_agp                 5310  1 
cfg80211              126517  3 ath5k,mac80211,ath
led_class               2864  1 ath5k
psmouse                63245  0 
serio_raw               3978  0 
i2c_viapro              5573  0 
shpchp                 28820  0 
agpgart                31724  2 drm,via_agp
lp                      7028  0 
parport                32635  2 ppdev,lp
usb_storage            39425  1 
via_rhine              19154  0 
mii                     4381  1 via_rhine
sata_via                6945  3 
pata_via                7272  0

Ubuntu, niedziałające połączenie (dmesg):

Kod:

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32-24-generic (buildd@vernadsky) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #38-Ubuntu SMP Mon Jul 5 09:22:14 UTC 2010 (Ubuntu 2.6.32-24.38-generic 2.6.32.15+drm33.5)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[    0.000000]  BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000002fe90000 (usable)
[    0.000000]  BIOS-e820: 000000002fe90000 - 000000002fe9e000 (ACPI data)
[    0.000000]  BIOS-e820: 000000002fe9e000 - 000000002ff00000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000002ff00000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] DMI present.
[    0.000000] last_pfn = 0x2fe90 max_arch_pfn = 0x100000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-DFFFF uncachable
[    0.000000]   E0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 02FF00000 mask FFFF00000 uncachable
[    0.000000]   2 base 030000000 mask FF0000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000002000 (usable)
[    0.000000]  modified: 0000000000002000 - 0000000000006000 (reserved)
[    0.000000]  modified: 0000000000006000 - 000000000009dc00 (usable)
[    0.000000]  modified: 000000000009dc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000002fe90000 (usable)
[    0.000000]  modified: 000000002fe90000 - 000000002fe9e000 (ACPI data)
[    0.000000]  modified: 000000002fe9e000 - 000000002ff00000 (ACPI NVS)
[    0.000000]  modified: 000000002ff00000 - 0000000040000000 (reserved)
[    0.000000]  modified: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000] initial memory mapped : 0 - 00c00000
[    0.000000] init_memory_mapping: 0000000000000000-000000002fe90000
[    0.000000] Using x86 segment limits to approximate NX protection
[    0.000000]  0000000000 - 0000400000 page 4k
[    0.000000]  0000400000 - 002fc00000 page 2M
[    0.000000]  002fc00000 - 002fe90000 page 4k
[    0.000000] kernel direct mapping tables up to 2fe90000 @ 7000-c000
[    0.000000] RAMDISK: 23792000 - 23f2bcf5
[    0.000000] ACPI: RSDP 000f73b0 00014 (v00 PTLTD )
[    0.000000] ACPI: RSDT 2fe97e79 00038 (v01 FSC    PC       06040000  LTP 00000000)
[    0.000000] ACPI: FACP 2fe9dd70 00074 (v01 VN896  PTLTW    06040000 PTL_ 000F4240)
[    0.000000] ACPI: DSDT 2fe988f0 05480 (v01  FIC   LM10W    06040000 MSFT 0100000E)
[    0.000000] ACPI: FACS 2fe9efc0 00040
[    0.000000] ACPI: APIC 2fe9dde4 0006A (v01 PTLTD  ? APIC   06040000  LTP 00000000)
[    0.000000] ACPI: MCFG 2fe9de4e 0003C (v01 PTLTD    MCFG   06040000  LTP 00000000)
[    0.000000] ACPI: SLIC 2fe9de8a 00176 (v01 FSC    PC       06040000      00000000)
[    0.000000] ACPI: SSDT 2fe97eb1 00519 (v01  PmRef    CpuPm 00003000 INTL 20050228)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 766MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 2fe90000
[    0.000000]   low ram: 0 - 2fe90000
[    0.000000]   node 0 low ram: 00000000 - 2fe90000
[    0.000000]   node 0 bootmap 00008000 - 0000dfd4
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 002fe90000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 00008dbeb8]    TEXT DATA BSS ==> [0000100000 - 00008dbeb8]
[    0.000000]   #4 [0023792000 - 0023f2bcf5]          RAMDISK ==> [0023792000 - 0023f2bcf5]
[    0.000000]   #5 [000009dc00 - 0000100000]    BIOS reserved ==> [000009dc00 - 0000100000]
[    0.000000]   #6 [00008dc000 - 00008df176]              BRK ==> [00008dc000 - 00008df176]
[    0.000000]   #7 [0000007000 - 0000008000]          PGTABLE ==> [0000007000 - 0000008000]
[    0.000000]   #8 [0000008000 - 000000e000]          BOOTMAP ==> [0000008000 - 000000e000]
[    0.000000] found SMP MP-table at [c00f7460] f7460
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x0002fe90
[    0.000000]   HighMem  0x0002fe90 -> 0x0002fe90
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00000002
[    0.000000]     0: 0x00000006 -> 0x0000009d
[    0.000000]     0: 0x00000100 -> 0x0002fe90
[    0.000000] On node 0 totalpages: 196137
[    0.000000] free_area_init_node: node 0, pgdat c0798780, node_mem_map c1001000
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3961 pages, LIFO batch:0
[    0.000000]   Normal zone: 1502 pages used for memmap
[    0.000000]   Normal zone: 190642 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x4008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 48
[    0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 14 pages/cpu @c1800000 s36056 r0 d21288 u2097152
[    0.000000] pcpu-alloc: s36056 r0 d21288 u2097152 alloc=1*4194304
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 194603
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=d7fb82ab-09b0-4058-9868-087007f1d55d ro quiet splash
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] allocated 3924800 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 757316k/784960k available (4679k kernel code, 26784k reserved, 2116k data, 660k init, 0k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff1d000 - 0xfffff000   ( 904 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0xf0690000 - 0xff7fe000   ( 241 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xefe90000   ( 766 MB)
[    0.000000]       .init : 0xc07a3000 - 0xc0848000   ( 660 kB)
[    0.000000]       .data : 0xc0591d23 - 0xc07a2e88   (2116 kB)
[    0.000000]       .text : 0xc0100000 - 0xc0591d23   (4679 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:2304 nr_irqs:512
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1861.901 MHz processor.
[    0.004009] Calibrating delay loop (skipped), value calculated using timer frequency.. 3723.80 BogoMIPS (lpj=7447604)
[    0.004049] Security Framework initialized
[    0.004095] AppArmor: AppArmor initialized
[    0.004112] Mount-cache hash table entries: 512
[    0.004380] Initializing cgroup subsys ns
[    0.004389] Initializing cgroup subsys cpuacct
[    0.004399] Initializing cgroup subsys memory
[    0.004416] Initializing cgroup subsys devices
[    0.004422] Initializing cgroup subsys freezer
[    0.004428] Initializing cgroup subsys net_cls
[    0.004473] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004480] CPU: L2 cache: 2048K
[    0.004488] CPU: Physical Processor ID: 0
[    0.004492] CPU: Processor Core ID: 0
[    0.004501] mce: CPU supports 6 MCE banks
[    0.004524] CPU0: Thermal monitoring enabled (TM1)
[    0.004533] using mwait in idle threads.
[    0.004546] Performance Events: no PMU driver, software events only.
[    0.004558] Checking 'hlt' instruction... OK.
[    0.027676] ACPI: Core revision 20090903
[    0.044261] ftrace: converting mcount calls to 0f 1f 44 00 00
[    0.044273] ftrace: allocating 21780 entries in 43 pages
[    0.052132] Enabling APIC mode:  Flat.  Using 2 I/O APICs
[    0.052704] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[    0.060001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[    0.060001] ...trying to set up timer (IRQ0) through the 8259A ...
[    0.060001] ..... (found apic 0 pin 0) ...
[    0.100771] ....... works.
[    0.100775] CPU0: Intel(R) Core(TM) Duo CPU      T2350  @ 1.86GHz stepping 0c
[    0.104001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.008000] Initializing CPU#1
[    0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.008000] CPU: L2 cache: 2048K
[    0.008000] CPU: Physical Processor ID: 0
[    0.008000] CPU: Processor Core ID: 1
[    0.008000] CPU1: Thermal monitoring enabled (TM1)
[    0.188070] CPU1: Intel(R) Core(TM) Duo CPU      T2350  @ 1.86GHz stepping 0c
[    0.188102] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.192043] Brought up 2 CPUs
[    0.192051] Total of 2 processors activated (7448.23 BogoMIPS).
[    0.193078] CPU0 attaching sched-domain:
[    0.193086]  domain 0: span 0-1 level MC
[    0.193093]   groups: 0 1
[    0.193109] CPU1 attaching sched-domain:
[    0.193115]  domain 0: span 0-1 level MC
[    0.193121]   groups: 1 0
[    0.193365] devtmpfs: initialized
[    0.193365] regulator: core version 0.5
[    0.193365] Time: 20:06:49  Date: 08/03/10
[    0.193365] NET: Registered protocol family 16
[    0.193365] Trying to unpack rootfs image as initramfs...
[    0.193365] EISA bus registered
[    0.193365] ACPI: bus type pci registered
[    0.193365] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.193365] PCI: Not using MMCONFIG.
[    0.193365] PCI: BIOS BUG #81[49435000] found
[    0.193365] PCI: Using configuration type 1 for base access
[    0.208273] bio: create slab <bio-0> at 0
[    0.209866] ACPI: EC: Look up EC in DSDT
[    0.420691] ACPI: Interpreter enabled
[    0.420734] ACPI: (supports S0 S3 S4 S5)
[    0.420787] ACPI: Using IOAPIC for interrupt routing
[    0.420897] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.421154] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.421160] PCI: Using MMCONFIG for extended config space
[    0.433762] ACPI: Power Resource [PFAN] (off)
[    0.434235] ACPI: No dock devices found.
[    0.434484] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.434617] pci 0000:00:00.0: reg 10 32bit mmio pref: [0xc0000000-0xc7ffffff]
[    0.435522] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.435531] pci 0000:00:02.0: PME# disabled
[    0.435669] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.435678] pci 0000:00:03.0: PME# disabled
[    0.435798] pci 0000:00:0f.0: reg 10 io port: [0x60b8-0x60bf]
[    0.435813] pci 0000:00:0f.0: reg 14 io port: [0x60b0-0x60b3]
[    0.435827] pci 0000:00:0f.0: reg 18 io port: [0x6008-0x600f]
[    0.435842] pci 0000:00:0f.0: reg 1c io port: [0x6004-0x6007]
[    0.435856] pci 0000:00:0f.0: reg 20 io port: [0x6010-0x601f]
[    0.435871] pci 0000:00:0f.0: reg 24 io port: [0x6400-0x64ff]
[    0.436034] pci 0000:00:0f.1: reg 20 io port: [0x60a0-0x60af]
[    0.436202] pci 0000:00:10.0: reg 20 io port: [0x6020-0x603f]
[    0.436250] pci 0000:00:10.0: supports D1 D2
[    0.436257] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.436266] pci 0000:00:10.0: PME# disabled
[    0.436354] pci 0000:00:10.1: reg 20 io port: [0x6040-0x605f]
[    0.436403] pci 0000:00:10.1: supports D1 D2
[    0.436409] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.436419] pci 0000:00:10.1: PME# disabled
[    0.436506] pci 0000:00:10.2: reg 20 io port: [0x6060-0x607f]
[    0.436554] pci 0000:00:10.2: supports D1 D2
[    0.436560] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.436570] pci 0000:00:10.2: PME# disabled
[    0.436658] pci 0000:00:10.3: reg 20 io port: [0x6080-0x609f]
[    0.436706] pci 0000:00:10.3: supports D1 D2
[    0.436712] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.436722] pci 0000:00:10.3: PME# disabled
[    0.436781] pci 0000:00:10.4: reg 10 32bit mmio: [0xc9400000-0xc94000ff]
[    0.436858] pci 0000:00:10.4: supports D1 D2
[    0.436864] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[    0.436874] pci 0000:00:10.4: PME# disabled
[    0.437194] pci 0000:00:12.0: reg 10 io port: [0x6800-0x68ff]
[    0.437209] pci 0000:00:12.0: reg 14 32bit mmio: [0xc9400400-0xc94004ff]
[    0.437280] pci 0000:00:12.0: supports D1 D2
[    0.437286] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.437296] pci 0000:00:12.0: PME# disabled
[    0.437654] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xa0000000-0xbfffffff]
[    0.437669] pci 0000:01:00.0: reg 14 32bit mmio: [0xc8000000-0xc8ffffff]
[    0.437709] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x00ffff]
[    0.437746] pci 0000:01:00.0: supports D1 D2
[    0.437827] pci 0000:00:01.0: bridge 32bit mmio: [0xc8000000-0xc8ffffff]
[    0.437839] pci 0000:00:01.0: bridge 32bit mmio pref: [0xa0000000-0xbfffffff]
[    0.438532] pci 0000:00:03.0: bridge io port: [0x7000-0x7fff]
[    0.438543] pci 0000:00:03.0: bridge 32bit mmio: [0xc9000000-0xc90fffff]
[    0.438627] pci 0000:04:01.0: reg 10 64bit mmio: [0xc9100000-0xc9103fff]
[    0.438706] pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
[    0.438715] pci 0000:04:01.0: PME# disabled
[    0.439046] pci 0000:00:13.0: bridge 32bit mmio: [0xc9100000-0xc91fffff]
[    0.439120] pci 0000:05:01.0: reg 10 32bit mmio: [0xc9000000-0xc900ffff]
[    0.439271] pci 0000:00:13.1: transparent bridge
[    0.439285] pci 0000:00:13.1: bridge 32bit mmio: [0xc9000000-0xc90fffff]
[    0.439336] pci_bus 0000:00: on NUMA node 0
[    0.439347] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.440200] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGC._PRT]
[    0.440343] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE0C._PRT]
[    0.440626] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SP2P._PRT]
[    0.440918] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE._PRT]
[    0.477778] ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled.
[    0.478005] ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *10, disabled.
[    0.478223] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *11, disabled.
[    0.478443] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *3, disabled.
[    0.478725] ACPI: PCI Interrupt Link [LNKA] (IRQs *9 10 11 12)
[    0.478999] ACPI: PCI Interrupt Link [LNKB] (IRQs 9 *10 11 12)
[    0.479292] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11 12)
[    0.479564] ACPI: PCI Interrupt Link [LNKD] (IRQs 9 10 11 12) *3
[    0.479925] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.479936] vgaarb: loaded
[    0.480300] SCSI subsystem initialized
[    0.480570] libata version 3.00 loaded.
[    0.480800] usbcore: registered new interface driver usbfs
[    0.480834] usbcore: registered new interface driver hub
[    0.480912] usbcore: registered new device driver usb
[    0.481275] ACPI: WMI: Mapper loaded
[    0.481281] PCI: Using ACPI for IRQ routing
[    0.537233] pci 0000:00:13.1: BAR 14: address space collision on of bridge [0xc9000000-0xc90fffff]
[    0.537242] pci 0000:00:13.1: BAR 14: can't allocate resource
[    0.537358] pci 0000:05:01.0: BAR 0: address space collision on of device [0xc9000000-0xc900ffff]
[    0.537365] pci 0000:05:01.0: BAR 0: can't allocate resource
[    0.537735] NetLabel: Initializing
[    0.537742] NetLabel:  domain hash size = 128
[    0.537747] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.537786] NetLabel:  unlabeled traffic allowed by default
[    0.537920] Switching to clocksource tsc
[    0.541651] AppArmor: AppArmor Filesystem Enabled
[    0.541689] pnp: PnP ACPI init
[    0.541724] ACPI: bus type pnp registered
[    0.546900] pnp: PnP ACPI: found 10 devices
[    0.546908] ACPI: ACPI bus type pnp unregistered
[    0.546919] PnPBIOS: Disabled by ACPI PNP
[    0.546958] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[    0.546967] system 00:01: iomem range 0xf0012000-0xf0012fff has been reserved
[    0.546976] system 00:01: iomem range 0xf0013000-0xf0013fff has been reserved
[    0.546996] system 00:06: iomem range 0x0-0x9ffff could not be reserved
[    0.547005] system 00:06: iomem range 0xc0000-0xcffff could not be reserved
[    0.547013] system 00:06: iomem range 0xe0000-0xfffff could not be reserved
[    0.547022] system 00:06: iomem range 0xe0000000-0xe01010ff has been reserved
[    0.547030] system 00:06: iomem range 0xe00100ff-0xe00190fe has been reserved
[    0.547039] system 00:06: iomem range 0xe00700ff-0xe007a0fe has been reserved
[    0.547047] system 00:06: iomem range 0xe00800ff-0xe00a00fe has been reserved
[    0.547056] system 00:06: iomem range 0xe01000ff-0xe06000fe could not be reserved
[    0.547064] system 00:06: iomem range 0xf00120ff-0xf00140fe could not be reserved
[    0.547073] system 00:06: iomem range 0xffb80000-0xffc7ffff has been reserved
[    0.547081] system 00:06: iomem range 0xfff00000-0xffffffff has been reserved
[    0.547090] system 00:06: iomem range 0xffee0000-0xffefffff has been reserved
[    0.547098] system 00:06: iomem range 0xfec00000-0xfec0ffff could not be reserved
[    0.547107] system 00:06: iomem range 0xfee00000-0xfee0ffff could not be reserved
[    0.547125] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[    0.547134] system 00:07: ioport range 0xfe10-0xfe11 has been reserved
[    0.547142] system 00:07: ioport range 0xfe00-0xfe00 has been reserved
[    0.547150] system 00:07: ioport range 0x4000-0x407f has been reserved
[    0.547158] system 00:07: ioport range 0x4100-0x411f has been reserved
[    0.582345] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xc0000000-0xbfffffff]
[    0.582356] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.582362] pci 0000:00:01.0:   IO window: disabled
[    0.582374] pci 0000:00:01.0:   MEM window: 0xc8000000-0xc8ffffff
[    0.582385] pci 0000:00:01.0:   PREFETCH window: 0xa0000000-0xbfffffff
[    0.582399] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
[    0.582407] pci 0000:00:02.0:   IO window: 0x1000-0x1fff
[    0.582418] pci 0000:00:02.0:   MEM window: 0x40000000-0x401fffff
[    0.582429] pci 0000:00:02.0:   PREFETCH window: 0x00000040200000-0x000000403fffff
[    0.582442] pci 0000:00:03.0: PCI bridge, secondary bus 0000:03
[    0.582451] pci 0000:00:03.0:   IO window: 0x7000-0x7fff
[    0.582463] pci 0000:00:03.0:   MEM window: 0xc9000000-0xc90fffff
[    0.582473] pci 0000:00:03.0:   PREFETCH window: 0x00000040400000-0x000000405fffff
[    0.582488] pci 0000:00:13.0: PCI bridge, secondary bus 0000:04
[    0.582494] pci 0000:00:13.0:   IO window: disabled
[    0.582505] pci 0000:00:13.0:   MEM window: 0xc9100000-0xc91fffff
[    0.582514] pci 0000:00:13.0:   PREFETCH window: disabled
[    0.582533] pci 0000:00:13.1: PCI bridge, secondary bus 0000:05
[    0.582539] pci 0000:00:13.1:   IO window: disabled
[    0.582550] pci 0000:00:13.1:   MEM window: 0x40600000-0x406fffff
[    0.582559] pci 0000:00:13.1:   PREFETCH window: disabled
[    0.582597] pci 0000:00:01.0: setting latency timer to 64
[    0.582625]   alloc irq_desc for 27 on node -1
[    0.582631]   alloc kstat_irqs on node -1
[    0.582650] pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
[    0.582660] pci 0000:00:02.0: setting latency timer to 64
[    0.582686]   alloc irq_desc for 31 on node -1
[    0.582691]   alloc kstat_irqs on node -1
[    0.582700] pci 0000:00:03.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
[    0.582711] pci 0000:00:03.0: setting latency timer to 64
[    0.582726] pci 0000:00:13.0: setting latency timer to 64
[    0.582741] pci 0000:00:13.1: setting latency timer to 64
[    0.582751] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.582759] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[    0.582767] pci_bus 0000:01: resource 1 mem: [0xc8000000-0xc8ffffff]
[    0.582775] pci_bus 0000:01: resource 2 pref mem [0xa0000000-0xbfffffff]
[    0.582782] pci_bus 0000:02: resource 0 io:  [0x1000-0x1fff]
[    0.582789] pci_bus 0000:02: resource 1 mem: [0x40000000-0x401fffff]
[    0.582797] pci_bus 0000:02: resource 2 pref mem [0x40200000-0x403fffff]
[    0.582805] pci_bus 0000:03: resource 0 io:  [0x7000-0x7fff]
[    0.582812] pci_bus 0000:03: resource 1 mem: [0xc9000000-0xc90fffff]
[    0.582819] pci_bus 0000:03: resource 2 pref mem [0x40400000-0x405fffff]
[    0.582827] pci_bus 0000:04: resource 1 mem: [0xc9100000-0xc91fffff]
[    0.582835] pci_bus 0000:05: resource 1 mem: [0x40600000-0x406fffff]
[    0.582843] pci_bus 0000:05: resource 3 io:  [0x00-0xffff]
[    0.582850] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
[    0.582971] NET: Registered protocol family 2
[    0.583254] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.584098] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.586384] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.587649] TCP: Hash tables configured (established 131072 bind 65536)
[    0.587656] TCP reno registered
[    0.587937] NET: Registered protocol family 1
[    0.587982] pci 0000:00:00.0: MSI quirk detected; MSI disabled
[    0.588017] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[    0.776898] Freeing initrd memory: 7783k freed
[    2.192028] pci 0000:00:10.4: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[    2.192091] pci 0000:01:00.0: Boot video device
[    2.192687] cpufreq-nforce2: No nForce2 chipset.
[    2.192774] Scanning for low memory corruption every 60 seconds
[    2.193121] audit: initializing netlink socket (disabled)
[    2.193158] type=2000 audit(1280866011.192:1): initialized
[    2.219309] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    2.223709] VFS: Disk quotas dquot_6.5.2
[    2.223872] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.225550] fuse init (API version 7.13)
[    2.225793] msgmni has been set to 1495
[    2.226378] alg: No test for stdrng (krng)
[    2.226527] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    2.226536] io scheduler noop registered
[    2.226542] io scheduler anticipatory registered
[    2.226547] io scheduler deadline registered
[    2.226661] io scheduler cfq registered (default)
[    2.227035] pcieport 0000:00:02.0: setting latency timer to 64
[    2.227303] pcieport 0000:00:03.0: setting latency timer to 64
[    2.227551] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    2.227732] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    2.228898] ACPI: AC Adapter [ACAD] (off-line)
[    2.229094] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    2.229105] ACPI: Power Button [PWRB]
[    2.229224] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    2.229296] ACPI: Lid Switch [LID]
[    2.229444] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    2.229452] ACPI: Power Button [PWRF]
[    2.229622] fan PNP0C0B:00: registered as cooling_device0
[    2.229637] ACPI: Fan [FAN] (on)
[    2.231188] ACPI: SSDT 2fe9863f 0022A (v01  PmRef  Cpu0Ist 00003000 INTL 20050228)
[    2.232360] ACPI: SSDT 2fe983ca 001F0 (v01  PmRef  Cpu0Cst 00003001 INTL 20050228)
[    2.233067] Marking TSC unstable due to TSC halts in idle
[    2.233161] Switching to clocksource acpi_pm
[    2.233279] processor LNXCPU:00: registered as cooling_device1
[    2.234159] ACPI: SSDT 2fe98869 00087 (v01  PmRef  Cpu1Ist 00003000 INTL 20050228)
[    2.234804] ACPI: SSDT 2fe985ba 00085 (v01  PmRef  Cpu1Cst 00003000 INTL 20050228)
[    2.235556] processor LNXCPU:01: registered as cooling_device2
[    2.821198] thermal LNXTHERM:01: registered as thermal_zone0
[    2.821220] ACPI: Thermal Zone [THRM] (53 C)
[    2.825113] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.828692] brd: module loaded
[    2.829059] isapnp: Scanning for PnP cards...
[    2.829982] loop: module loaded
[    2.830203] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[    2.830553]   alloc irq_desc for 21 on node -1
[    2.830559]   alloc kstat_irqs on node -1
[    2.830576] pata_acpi 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    2.830643] pata_acpi 0000:00:0f.0: setting latency timer to 64
[    2.830672] pata_acpi 0000:00:0f.0: PCI INT B disabled
[    2.840998] pata_acpi 0000:00:0f.1: power state changed by ACPI to D0
[    2.841071] pata_acpi 0000:00:0f.1: power state changed by ACPI to D0
[    2.841121] pata_acpi 0000:00:0f.1: setting latency timer to 64
[    2.841978] Fixed MDIO Bus: probed
[    2.842077] PPP generic driver version 2.4.2
[    2.842170] tun: Universal TUN/TAP device driver, 1.6
[    2.842175] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.842384] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.842428] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[    2.842453] ehci_hcd 0000:00:10.4: setting latency timer to 64
[    2.842461] ehci_hcd 0000:00:10.4: EHCI Host Controller
[    2.842543] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[    2.842630] ehci_hcd 0000:00:10.4: irq 21, io mem 0xc9400000
[    2.856026] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[    2.856253] usb usb1: configuration #1 chosen from 1 choice
[    2.856330] hub 1-0:1.0: USB hub found
[    2.856349] hub 1-0:1.0: 8 ports detected
[    2.856514] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.856554] uhci_hcd: USB Universal Host Controller Interface driver
[    2.856615]   alloc irq_desc for 20 on node -1
[    2.856621]   alloc kstat_irqs on node -1
[    2.856632] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    2.856646] uhci_hcd 0000:00:10.0: setting latency timer to 64
[    2.856654] uhci_hcd 0000:00:10.0: UHCI Host Controller
[    2.856733] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    2.856783] uhci_hcd 0000:00:10.0: irq 20, io base 0x00006020
[    2.856995] usb usb2: configuration #1 chosen from 1 choice
[    2.857063] hub 2-0:1.0: USB hub found
[    2.857080] hub 2-0:1.0: 2 ports detected
[    2.857199]   alloc irq_desc for 22 on node -1
[    2.857205]   alloc kstat_irqs on node -1
[    2.857216] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[    2.857229] uhci_hcd 0000:00:10.1: setting latency timer to 64
[    2.857237] uhci_hcd 0000:00:10.1: UHCI Host Controller
[    2.857320] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[    2.857367] uhci_hcd 0000:00:10.1: irq 22, io base 0x00006040
[    2.857574] usb usb3: configuration #1 chosen from 1 choice
[    2.857649] hub 3-0:1.0: USB hub found
[    2.857666] hub 3-0:1.0: 2 ports detected
[    2.857769] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[    2.857783] uhci_hcd 0000:00:10.2: setting latency timer to 64
[    2.857791] uhci_hcd 0000:00:10.2: UHCI Host Controller
[    2.857869] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[    2.857902] uhci_hcd 0000:00:10.2: irq 21, io base 0x00006060
[    2.858138] usb usb4: configuration #1 chosen from 1 choice
[    2.858215] hub 4-0:1.0: USB hub found
[    2.858231] hub 4-0:1.0: 2 ports detected
[    2.858334]   alloc irq_desc for 23 on node -1
[    2.858339]   alloc kstat_irqs on node -1
[    2.858350] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    2.858363] uhci_hcd 0000:00:10.3: setting latency timer to 64
[    2.858371] uhci_hcd 0000:00:10.3: UHCI Host Controller
[    2.858454] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[    2.858501] uhci_hcd 0000:00:10.3: irq 23, io base 0x00006080
[    2.858718] usb usb5: configuration #1 chosen from 1 choice
[    2.858788] hub 5-0:1.0: USB hub found
[    2.858803] hub 5-0:1.0: 2 ports detected
[    2.859022] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    2.861073] i8042.c: Detected active multiplexing controller, rev 1.1.
[    2.862454] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.862471] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    2.872028] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    2.872097] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    2.872167] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    2.872471] mice: PS/2 mouse device common for all mice
[    2.872799] rtc_cmos 00:04: RTC can wake from S4
[    2.872889] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    2.872936] rtc0: alarms up to one year, y3k, 242 bytes nvram
[    2.873210] device-mapper: uevent: version 1.0.3
[    2.876739] ACPI: Battery Slot [BAT0] (battery present)
[    2.876940] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    2.877116] device-mapper: multipath: version 1.1.0 loaded
[    2.877123] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.877416] EISA: Probing bus 0 at eisa.0
[    2.877430] Cannot allocate resource for EISA slot 1
[    2.877448] Cannot allocate resource for EISA slot 4
[    2.877460] Cannot allocate resource for EISA slot 6
[    2.877467] Cannot allocate resource for EISA slot 7
[    2.877479] EISA: Detected 0 cards.
[    2.877802] cpuidle: using governor ladder
[    2.878042] cpuidle: using governor menu
[    2.879205] TCP cubic registered
[    2.879638] NET: Registered protocol family 10
[    2.880901] lo: Disabled Privacy Extensions
[    2.881801] NET: Registered protocol family 17
[    2.882548] Using IPI No-Shortcut mode
[    2.882721] PM: Resume from disk failed.
[    2.882739] registered taskstats version 1
[    2.883211]   Magic number: 6:423:143
[    2.883228] block ram8: hash matches
[    2.883277] acpi device:14: hash matches
[    2.883351] rtc_cmos 00:04: setting system clock to 2010-08-03 20:06:52 UTC (1280866012)
[    2.883356] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.883358] EDD information not available.
[    2.900980] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    3.183324] isapnp: No Plug & Play device found
[    3.183370] Freeing unused kernel memory: 660k freed
[    3.183911] Write protecting the kernel text: 4680k
[    3.183967] Write protecting the kernel read-only data: 1840k
[    3.201996] udev: starting version 151
[    3.338916] pata_via 0000:00:0f.1: version 0.3.4
[    3.343984] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[    3.350524] pata_via 0000:00:0f.1: power state changed by ACPI to D0
[    3.350569] pata_via 0000:00:0f.1: power state changed by ACPI to D0
[    3.350836] scsi0 : pata_via
[    3.351034] scsi1 : pata_via
[    3.351946] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x60a0 irq 14
[    3.351950] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x60a8 irq 15
[    3.352009] sata_via 0000:00:0f.0: version 2.4
[    3.352029] sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    3.352070] sata_via 0000:00:0f.0: routed to hard irq line 10
[    3.352126] scsi2 : sata_via
[    3.352200] scsi3 : sata_via
[    3.352244] ata1: port disabled. ignoring.
[    3.352382] ata3: SATA max UDMA/133 cmd 0x60b8 ctl 0x60b0 bmdma 0x6010 irq 21
[    3.352385] ata4: SATA max UDMA/133 cmd 0x6008 ctl 0x6004 bmdma 0x6018 irq 21
[    3.352435] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.361665] eth0: VIA Rhine II at 0xc9400400, 00:14:0b:0f:a8:54, IRQ 23.
[    3.362376] eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
[    3.520427] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PW03, max UDMA/33
[    3.536288] ata2.00: configured for UDMA/33
[    3.541911] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-T10N  PW03 PQ: 0 ANSI: 5
[    3.553470] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.553475] Uniform CD-ROM driver Revision: 3.20
[    3.553643] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.553746] sr 1:0:0:0: Attached scsi generic sg0 type 5
[    3.557026] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    3.776260] ata3.00: ATA-7: WDC WD1200BEVS-07LAT0, 01.06M01, max UDMA/133
[    3.776264] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/1)
[    3.792444] ata3.00: configured for UDMA/133
[    3.792549] scsi 2:0:0:0: Direct-Access     ATA      WDC WD1200BEVS-0 01.0 PQ: 0 ANSI: 5
[    3.792694] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    3.792740] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    3.792805] sd 2:0:0:0: [sda] Write Protect is off
[    3.792809] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.792842] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.793005]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    3.852226] sd 2:0:0:0: [sda] Attached SCSI disk
[    3.996045] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[    4.522218] EXT4-fs (sda5): mounted filesystem with ordered data mode
[    4.588053] usb 1-3: new high speed USB device using ehci_hcd and address 2
[    4.718569] usb 1-3: configuration #1 chosen from 1 choice
[   16.891595] udev: starting version 151
[   16.900663] Adding 1984016k swap on /dev/sda3.  Priority:-1 extents:1 across:1984016k 
[   16.939660] lp: driver loaded but no devices found
[   17.058626] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   17.066156] Linux agpgart interface v0.103
[   17.070832] agpgart: Detected VIA P4M900 chipset
[   17.100875] vga16fb: initializing
[   17.100882] vga16fb: mapped to 0xc00a0000
[   17.100990] fb0: VGA16 VGA frame buffer device
[   17.181828] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xc0000000
[   17.226368] cfg80211: Calling CRDA to update world regulatory domain
[   17.229456] Initializing USB Mass Storage driver...
[   17.247410] scsi4 : SCSI emulation for USB Mass Storage devices
[   17.266087] usb-storage: device found at 2
[   17.266090] usb-storage: waiting for device to settle before scanning
[   17.272027] scsi5 : SCSI emulation for USB Mass Storage devices
[   17.280692] usbcore: registered new interface driver usb-storage
[   17.280696] USB Mass Storage support registered.
[   17.280953] usb-storage: device found at 2
[   17.280955] usb-storage: waiting for device to settle before scanning
[   17.307115] cfg80211: World regulatory domain updated:
[   17.307120]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   17.307124]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   17.307127]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   17.307130]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   17.307132]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   17.307135]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   17.341321] type=1505 audit(1280866026.956:2):  operation="profile_load" pid=561 name="/sbin/dhclient3"
[   17.341993] type=1505 audit(1280866026.956:3):  operation="profile_load" pid=561 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   17.342374] type=1505 audit(1280866026.956:4):  operation="profile_load" pid=561 name="/usr/lib/connman/scripts/dhclient-script"
[   17.354677] acpi device:1b: registered as cooling_device3
[   17.356013] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:19/LNXVIDEO:00/input/input5
[   17.356144] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   17.373130]   alloc irq_desc for 18 on node -1
[   17.373135]   alloc kstat_irqs on node -1
[   17.373149] ath5k 0000:05:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   17.373240] ath5k 0000:05:01.0: registered as 'phy0'
[   17.472863] Console: switching to colour frame buffer device 80x30
[   17.586568]   alloc irq_desc for 17 on node -1
[   17.586573]   alloc kstat_irqs on node -1
[   17.586591] HDA Intel 0000:04:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   17.586667] HDA Intel 0000:04:01.0: setting latency timer to 64
[   17.586672] HDA Intel 0000:04:01.0: PCI: Disallowing DAC for device
[   17.612160] input: PS/2 Mouse as /devices/platform/i8042/serio4/input/input6
[   17.628829] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input7
[   17.846332] ip_tables: (C) 2000-2006 Netfilter Core Team
[   17.965606] ath: EEPROM regdomain: 0x30
[   17.965611] ath: EEPROM indicates we should expect a direct regpair map
[   17.965616] ath: Country alpha2 being used: AM
[   17.965618] ath: Regpair used: 0x30
[   17.971975] phy0: Selected rate control algorithm 'minstrel'
[   17.972895] ath5k phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
[   17.973113] cfg80211: Calling CRDA for country: AM
[   17.986615] cfg80211: Regulatory domain changed to country: AM
[   17.986620]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   17.986624]     (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   17.986627]     (5170000 KHz - 5250000 KHz @ 20000 KHz), (N/A, 1800 mBm)
[   17.986630]     (5250000 KHz - 5330000 KHz @ 20000 KHz), (N/A, 1800 mBm)
[   17.997833] nf_conntrack version 0.5.0 (11971 buckets, 47884 max)
[   17.999187] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[   17.999191] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[   17.999193] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[   18.179367] EXT4-fs (sda6): mounted filesystem with ordered data mode
[   18.724494] type=1505 audit(1280866028.337:5):  operation="profile_load" pid=779 name="/usr/share/gdm/guest-session/Xsession"
[   18.726926] type=1505 audit(1280866028.341:6):  operation="profile_replace" pid=780 name="/sbin/dhclient3"
[   18.727877] type=1505 audit(1280866028.341:7):  operation="profile_replace" pid=780 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[   18.728395] type=1505 audit(1280866028.341:8):  operation="profile_replace" pid=780 name="/usr/lib/connman/scripts/dhclient-script"
[   18.734594] type=1505 audit(1280866028.349:9):  operation="profile_load" pid=781 name="/usr/bin/evince"
[   18.736327] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   18.747441] type=1505 audit(1280866028.361:10):  operation="profile_load" pid=781 name="/usr/bin/evince-previewer"
[   18.755308] type=1505 audit(1280866028.369:11):  operation="profile_load" pid=781 name="/usr/bin/evince-thumbnailer"
[   18.894653] eth0: link down
[   18.895503] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   18.962110] ath5k phy0: noise floor calibration failed (2412MHz)
[   19.055847] ath5k phy0: noise floor calibration failed (2412MHz)
[   19.061844] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   19.240573] ppdev: user-space parallel port driver
[   19.303818] ath5k phy0: noise floor calibration failed (2412MHz)
[   19.403781] ath5k phy0: noise floor calibration failed (2417MHz)
[   19.432466] [drm] Initialized drm 1.1.0 20060810
[   19.507854] ath5k phy0: noise floor calibration failed (2422MHz)
[   20.471620] ath5k phy0: noise floor calibration timeout (2462MHz)
[   20.727812] ath5k phy0: noise floor calibration failed (2412MHz)
[   22.271549] usb-storage: device scan complete
[   22.272632] scsi 4:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
[   22.280124] sr1: scsi-1 drive
[   22.280464] sr 4:0:0:0: Attached scsi CD-ROM sr1
[   22.280672] sr 4:0:0:0: Attached scsi generic sg2 type 5
[   22.291083] usb-storage: device scan complete
[   22.292209] scsi 5:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
[   22.296703] sd 5:0:0:0: Attached scsi generic sg3 type 0
[   22.302874] sd 5:0:0:0: [sdb] Attached SCSI removable disk
[   22.862166] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[   32.710558] ath5k phy0: noise floor calibration failed (2412MHz)
[   32.751663] ath5k phy0: noise floor calibration failed (2412MHz)
[   32.844810] ath5k phy0: noise floor calibration failed (2412MHz)
[   34.587861] ISO 9660 Extensions: Microsoft Joliet Level 1
[   34.595890] ISOFS: changing to secondary root

Ostatnio edytowany przez iacobus (2010-08-03 22:13:30)

Unix is user-friendly — it’s just choosy about who its friends are.

Offline

 

#10  2010-08-05 08:29:51

  ilin - Palacz

ilin
Palacz
Skąd: PRLu
Zarejestrowany: 2006-05-03

Re: Ubuntu wykrywa modem Huawei jedynie po restarcie z Debiana

Zobacz [url=http://wiki.debian.org/Huawei/E220]tutaj[/url] Być moze wystarczy przeładować ten modul z odpowiednim parametrem.

[b]Problemy rozwiązujemy na forum nie na PW[/b] -> Niech inni na tym skorzystają.
[url=http://dug.net.pl/]Polski portal Debiana[/url]

Offline

 

#11  2010-08-05 13:07:30

  iacobus - Członek DUG

iacobus
Członek DUG
Zarejestrowany: 2009-06-02

Re: Ubuntu wykrywa modem Huawei jedynie po restarcie z Debiana

Niestety te metody nie działają. Problem jest w tym, że po starcie ani Debian ani Ubuntu nie tworzy węzłów /dev/ttyUSB0 (1, 2). Różnica jest tylko taka, że w przypadku Debiana węzły zostaną utworzone po wyjęciu i włożeniu z powrotem modemu w gniazdo USB, a w przypadku Ubuntu nie.

Unix is user-friendly — it’s just choosy about who its friends are.

Offline

 

#12  2010-08-05 13:41:21

  paoolo - Oldtimer

paoolo
Oldtimer
Skąd: Kraków
Zarejestrowany: 2006-05-20

Re: Ubuntu wykrywa modem Huawei jedynie po restarcie z Debiana

udev nie robi tego co trzeba? Pod swój modem na Pcmcia który po jakiejś serii ładowania modułów widoczny jest podobnie jako usb na serial porcie, robiłem kernel. Lepiej pokaz logi jak umieszczasz modem w porcie, co się dzieje.

Offline

 

#13  2010-08-05 19:01:52

  iacobus - Członek DUG

iacobus
Członek DUG
Zarejestrowany: 2009-06-02

Re: Ubuntu wykrywa modem Huawei jedynie po restarcie z Debiana

W Debianie to wygląda tak:

Kod:

Aug  5 16:58:37 laptop kernel: [ 3762.644060] usb 1-3: new high speed USB device using ehci_hcd and address 5
Aug  5 16:58:37 laptop kernel: [ 3762.778353] usb 1-3: New USB device found, idVendor=12d1, idProduct=1446
Aug  5 16:58:37 laptop kernel: [ 3762.778361] usb 1-3: New USB device strings: Mfr=3, Product=2, SerialNumber=0
Aug  5 16:58:37 laptop kernel: [ 3762.778369] usb 1-3: Product: HUAWEI Mobile
Aug  5 16:58:37 laptop kernel: [ 3762.778374] usb 1-3: Manufacturer: HUAWEI Technology
Aug  5 16:58:37 laptop kernel: [ 3762.778622] usb 1-3: configuration #1 chosen from 1 choice
Aug  5 16:58:37 laptop kernel: [ 3762.780720] scsi13 : SCSI emulation for USB Mass Storage devices
Aug  5 16:58:37 laptop kernel: [ 3762.781112] scsi14 : SCSI emulation for USB Mass Storage devices
Aug  5 16:58:39 laptop usb_modeswitch: switching 12d1:1446 (HUAWEI Technology: HUAWEI Mobile)
Aug  5 16:58:39 laptop kernel: [ 3764.488229] usb 1-3: USB disconnect, address 5
Aug  5 16:58:43 laptop kernel: [ 3768.496049] usb 1-3: new high speed USB device using ehci_hcd and address 6
Aug  5 16:58:43 laptop kernel: [ 3768.630365] usb 1-3: New USB device found, idVendor=12d1, idProduct=1001
Aug  5 16:58:43 laptop kernel: [ 3768.630374] usb 1-3: New USB device strings: Mfr=3, Product=2, SerialNumber=0
Aug  5 16:58:43 laptop kernel: [ 3768.630381] usb 1-3: Product: HUAWEI Mobile
Aug  5 16:58:43 laptop kernel: [ 3768.630387] usb 1-3: Manufacturer: HUAWEI Technology
Aug  5 16:58:43 laptop kernel: [ 3768.630623] usb 1-3: configuration #1 chosen from 1 choice
Aug  5 16:58:43 laptop kernel: [ 3768.633293] option 1-3:1.0: GSM modem (1-port) converter detected
Aug  5 16:58:43 laptop kernel: [ 3768.633488] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB0
Aug  5 16:58:43 laptop kernel: [ 3768.633777] option 1-3:1.1: GSM modem (1-port) converter detected
Aug  5 16:58:43 laptop kernel: [ 3768.633916] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB1
Aug  5 16:58:43 laptop kernel: [ 3768.634174] option 1-3:1.2: GSM modem (1-port) converter detected
Aug  5 16:58:43 laptop kernel: [ 3768.634314] usb 1-3: GSM modem (1-port) converter now attached to ttyUSB2
Aug  5 16:58:43 laptop kernel: [ 3768.634921] scsi18 : SCSI emulation for USB Mass Storage devices
Aug  5 16:58:43 laptop kernel: [ 3768.635662] scsi19 : SCSI emulation for USB Mass Storage devices
Aug  5 16:58:44 laptop usb_modeswitch: switched to 12d1:1001 (HUAWEI Technology: HUAWEI Mobile)
Aug  5 16:58:48 laptop kernel: [ 3773.634850] scsi 18:0:0:0: CD-ROM            HUAWEI   Mass Storage     2.31 PQ: 0 ANSI: 2
Aug  5 16:58:48 laptop kernel: [ 3773.634960] scsi 19:0:0:0: Direct-Access     HUAWEI   SD Storage       2.31 PQ: 0 ANSI: 2
Aug  5 16:58:48 laptop kernel: [ 3773.641078] sr1: scsi-1 drive
Aug  5 16:58:48 laptop kernel: [ 3773.641553] sr 18:0:0:0: Attached scsi generic sg2 type 5
Aug  5 16:58:48 laptop kernel: [ 3773.642002] sd 19:0:0:0: Attached scsi generic sg3 type 0
Aug  5 16:58:48 laptop kernel: [ 3773.647062] sd 19:0:0:0: [sdb] Attached SCSI removable disk
Aug  5 16:58:54 laptop pppd[4279]: Plugin /usr/lib/pppd/2.4.4/nm-pppd-plugin.so loaded.
Aug  5 16:58:54 laptop pppd[4279]: pppd 2.4.4 started by root, uid 0
Aug  5 16:58:54 laptop pppd[4279]: Using interface ppp0
Aug  5 16:58:54 laptop pppd[4279]: Connect: ppp0 <--> /dev/ttyUSB0
Aug  5 16:58:54 laptop pppd[4279]: CHAP authentication succeeded
Aug  5 16:58:54 laptop pppd[4279]: CHAP authentication succeeded
Aug  5 16:58:58 laptop pppd[4279]: Could not determine remote IP address: defaulting to 10.64.64.64
Aug  5 16:58:58 laptop pppd[4279]: local  IP address 109.243.231.220
Aug  5 16:58:58 laptop pppd[4279]: remote IP address 10.64.64.64
Aug  5 16:58:58 laptop pppd[4279]: primary   DNS address 89.108.195.20
Aug  5 16:58:58 laptop pppd[4279]: secondary DNS address 89.108.195.21
Unix is user-friendly — it’s just choosy about who its friends are.

Offline

 

#14  2010-08-05 19:53:52

  iacobus - Członek DUG

iacobus
Członek DUG
Zarejestrowany: 2009-06-02

Re: Ubuntu wykrywa modem Huawei jedynie po restarcie z Debiana

OK, mam! Wystarczyło doinstalować dwa pakiety, wszystko było opisane w Czytelni Ubuntu. Jednak nadal pozostaje zagadka, dlaczego po restarcie z Debiana modem działał w Ubuntu? :-) Może mają jakąś wspólną przestrzeń pamięci dla kerneli? Sam nie wiem.

Unix is user-friendly — it’s just choosy about who its friends are.

Offline

 

#15  2010-08-05 21:44:18

  Jacekalex - Podobno człowiek...;)

Jacekalex
Podobno człowiek...;)
Skąd: /dev/urandom
Zarejestrowany: 2008-01-07

Re: Ubuntu wykrywa modem Huawei jedynie po restarcie z Debiana

Raczej pamięć modemu coś tam przechowywała.

Ale jak w Ubuntu używasz Network Managera, to albo przyzwyczajaj się do kłopotów, albo odzwyczajaj do internetu.
Pulseaudio i Network Manager - to chyba najbardziej spieprzone programy w historii Ubuntu.
Nigdy nie widziałem - żeby działały stabilnie i przewidywalnie , (przez trzy lata z Ubuntu).

To by było na tyle

W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem  para bellum  ;)       |       Pozdrawiam :)

Offline

 

#16  2010-10-04 17:09:26

  lis6502 - Łowca lamerów

lis6502
Łowca lamerów
Skąd: Stalinogród
Zarejestrowany: 2008-12-04

Re: Ubuntu wykrywa modem Huawei jedynie po restarcie z Debiana

Jednak nadal pozostaje zagadka, dlaczego po restarcie z Debiana modem działał w Ubuntu?[/quote]
Miałem podobną rozkmnię ostatnio u klientki z drukarką. Po jednym wydruku spod windy wszystko chodziło. Do wyłączenia drukarki. Odpowiedzią okazało się ładowanie firmware w trakcie tworzenia, jak to fachowo ujęliście, węzła.

Offline

 

 

Strony: 1

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
Nas ludzie lubią po prostu, a nie klikając w przyciski ;-)

[ Generated in 0.011 seconds, 11 queries executed ]

Informacje debugowania

Time (s) Query
0.00014 SET CHARSET latin2
0.00004 SET NAMES latin2
0.00121 SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='3.145.59.244' WHERE u.id=1
0.00074 REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '3.145.59.244', 1732484823)
0.00056 SELECT * FROM punbb_online WHERE logged<1732484523
0.00052 SELECT topic_id FROM punbb_posts WHERE id=153599
0.00005 SELECT id FROM punbb_posts WHERE topic_id=17354 ORDER BY posted
0.00057 SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=17354 AND t.moved_to IS NULL
0.00005 SELECT search_for, replace_with FROM punbb_censoring
0.00163 SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=17354 ORDER BY p.id LIMIT 0,25
0.00127 UPDATE punbb_topics SET num_views=num_views+1 WHERE id=17354
Total query time: 0.00678 s