Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Ogłoszenie
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
- Forum Debian Users Gang
- » Pochodne Debiana: Ubuntu, Mint
- » [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode
#1 2013-01-31 12:33:52
Bitels - 
Użytkownik
- Bitels
- Użytkownik
- Zarejestrowany: 2012-10-31
[SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode
Witam
Brat niesteyty sobie zażyczył ubuntu z gnome shell po tym jak zobaczył je u mnie. Po instalacji i krótkiej walce z "black screen" okazało się, że środowosko graficzne uruchamia sie tylko w fallback mode i nie moge tego w żaden sposób zmienić.
Kod:
glxinfo | grep "direct rendering" direct rendering: Yes
Kod:
glxinfo | grep "direct rendering" direct rendering: Yes
Kod:
sudo lshw -c video
description: VGA compatible controller
product: Mobile 4 Series Chipset Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 09
width: 64 bits
clock: 33MHz
capabilities: msi pm vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
resources: irq:45 memory:d0000000-d03fffff memory:c0000000-cfffffff ioport:50f0(size=8)Kod:
uname -r 3.2.0-36-generic
Edit: literówka
Rozwiązanie: po ponownym zainstalowaniu xserver-xorg-video-intel oraz dodaniu do /etc/rc.local
Kod:
sudo setpci -s 00:02.0 F4.B=00
wszystko hula jak trzeba
Ostatnio edytowany przez Bitels (2013-01-31 17:22:33)
Offline
#2 2013-01-31 12:51:20
Jacekalex - Podobno człowiek...;)
- Jacekalex
- Podobno człowiek...;)
- Skąd: /dev/urandom
- Zarejestrowany: 2008-01-07
Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode
Ja bym radził nowsze *buntu, ma też nowsze Gnome, i poprawione kilka błędów, które w 12.04 prawdopodobnie poprawione nie będą.
Poza tym Gnome-shell ssie dwa razy bardziej od Compiza z Emeraldem, i na sterowniku i915 i tej lub starszej karcie często się wykłada.
Na takim niezłym, ale niezbyt kosmicznym sprzęcie dużo łatwiej dojść do ładu z KDE-4 niż z Gnome-shell, bo KDE4 jest w tej chwili już w miarę stabilnym środowiskiem, a Gshell co chwila ma inne błędy, i co chwila sypie się na innych sterownikach.
Na jakiej karcie chodzi Gshell u Ciebie?
Względnie spróbuj na tym kompie odpalić oficjalny LiveCD z Gnome-shell (np Fedorę) - przygotowany przez deweloperów Gnome,3, będziesz wtedy widział, czy obrobi tą kartę, i przy okazji, czy sytuacja z Ubuntu jest możliwa do naprawienia przez jakieś kombinacje alpejskie czy nowszą wersję.
Sznurek:
http://www.gnome.org/getting-gnome/
Ostatnio edytowany przez Jacekalex (2013-01-31 12:52:12)
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)
Offline
#3 2013-01-31 13:16:14
Bitels - Użytkownik
- Bitels
- Użytkownik
- Zarejestrowany: 2012-10-31
Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode
Hehe u mnie śmiga z na piecyku E8400 z gtx460 4gb ram :P. a u brata niestety laptop eMachines E725 T4200 z gma4500hd 4gb ram. co dziwne po odpaleniu komendy z palca gnome-shell --replace odpala sie tak jak trzeba tylko dlaczego po wybraniu w lightdm uruchamia się fallback? Co do kde to nie lubię i nie specjalnie sie na nim znam (moja kobita ma kde na laptopie i jej sie podoba a ja na niego patrzeć nie moge i jak na niego siadam to odpalam openboxa :P). Co do gnome shell na ubuntu to ja osobiscie sobie chwalę. Czysty gnome shell bez udziwnien i 1000 dodatkow chodzi stabilnie i szybko(oczywiscie nie ma polotu do openboxa + tint2 + conky ale jest bardziej przyjazny ). Wracając do brata to wcześniej próbowalem go przesadzić na xfce ale sie uparł, że chce gnome shell tak wiec jako dobry brat siedze i walczę :P...
Offline
#4 2013-01-31 13:17:29
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode
Poza tym bardziej przydatne wyniki to:
Kod:
glxinfo | egrep -i 'direct|open'
i zawartość Xorg.0.log
Offline
#5 2013-01-31 13:26:16
Bitels - Użytkownik
- Bitels
- Użytkownik
- Zarejestrowany: 2012-10-31
Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode
Przoszę bardzo.
Kod:
glxinfo | egrep -i 'direct|open' direct rendering: Yes OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x300) OpenGL version string: 2.1 Mesa 8.0.4 OpenGL shading language version string: 1.20 OpenGL extensions:
Kod:
[ 103.498]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[ 103.498] X Protocol Version 11, Revision 0
[ 103.498] Build Operating System: Linux 2.6.42-23-generic x86_64 Ubuntu
[ 103.498] Current Operating System: Linux ubuntu 3.2.0-36-generic #57-Ubuntu SMP Tue Jan 8 21:44:52 UTC 2013 x86_64
[ 103.498] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-36-generic root=UUID=036a3c6a-b2c2-426f-8551-380458f64c7a ro acpi_osi=
[ 103.498] Build Date: 29 August 2012 12:12:33AM
[ 103.498] xorg-server 2:1.11.4-0ubuntu10.8 (For technical support please see http://www.ubuntu.com/support)
[ 103.498] Current version of pixman: 0.24.4
[ 103.498] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 103.498] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 103.498] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 31 12:12:41 2013
[ 103.499] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 103.499] (==) No Layout section. Using the first Screen section.
[ 103.499] (==) No screen section available. Using defaults.
[ 103.499] (**) |-->Screen "Default Screen Section" (0)
[ 103.499] (**) | |-->Monitor "<default monitor>"
[ 103.499] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 103.499] (==) Automatically adding devices
[ 103.499] (==) Automatically enabling devices
[ 103.499] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 103.499] Entry deleted from font path.
[ 103.499] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 103.499] Entry deleted from font path.
[ 103.499] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 103.499] Entry deleted from font path.
[ 103.499] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 103.499] Entry deleted from font path.
[ 103.499] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 103.499] Entry deleted from font path.
[ 103.499] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 103.499] Entry deleted from font path.
[ 103.499] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 103.499] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 103.499] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 103.499] (II) Loader magic: 0x7ff5656a4b00
[ 103.499] (II) Module ABI versions:
[ 103.499] X.Org ANSI C Emulation: 0.4
[ 103.499] X.Org Video Driver: 11.0
[ 103.499] X.Org XInput driver : 16.0
[ 103.499] X.Org Server Extension : 6.0
[ 103.500] (--) PCI:*(0:0:2:0) 8086:2a42:1025:0212 rev 9, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x000050f0/8
[ 103.500] (--) PCI: (0:0:2:1) 8086:2a43:1025:0212 rev 9, Mem @ 0xd3400000/1048576
[ 103.500] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 103.500] (II) LoadModule: "extmod"
[ 103.501] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 103.501] (II) Module extmod: vendor="X.Org Foundation"
[ 103.501] compiled for 1.11.3, module version = 1.0.0
[ 103.501] Module class: X.Org Server Extension
[ 103.501] ABI class: X.Org Server Extension, version 6.0
[ 103.501] (II) Loading extension MIT-SCREEN-SAVER
[ 103.501] (II) Loading extension XFree86-VidModeExtension
[ 103.501] (II) Loading extension XFree86-DGA
[ 103.501] (II) Loading extension DPMS
[ 103.501] (II) Loading extension XVideo
[ 103.501] (II) Loading extension XVideo-MotionCompensation
[ 103.501] (II) Loading extension X-Resource
[ 103.501] (II) LoadModule: "dbe"
[ 103.501] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 103.501] (II) Module dbe: vendor="X.Org Foundation"
[ 103.501] compiled for 1.11.3, module version = 1.0.0
[ 103.501] Module class: X.Org Server Extension
[ 103.501] ABI class: X.Org Server Extension, version 6.0
[ 103.501] (II) Loading extension DOUBLE-BUFFER
[ 103.501] (II) LoadModule: "glx"
[ 103.501] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 103.502] (II) Module glx: vendor="X.Org Foundation"
[ 103.502] compiled for 1.11.3, module version = 1.0.0
[ 103.502] ABI class: X.Org Server Extension, version 6.0
[ 103.502] (==) AIGLX enabled
[ 103.502] (II) Loading extension GLX
[ 103.502] (II) LoadModule: "record"
[ 103.502] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 103.502] (II) Module record: vendor="X.Org Foundation"
[ 103.502] compiled for 1.11.3, module version = 1.13.0
[ 103.502] Module class: X.Org Server Extension
[ 103.502] ABI class: X.Org Server Extension, version 6.0
[ 103.502] (II) Loading extension RECORD
[ 103.502] (II) LoadModule: "dri"
[ 103.502] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 103.502] (II) Module dri: vendor="X.Org Foundation"
[ 103.502] compiled for 1.11.3, module version = 1.0.0
[ 103.502] ABI class: X.Org Server Extension, version 6.0
[ 103.502] (II) Loading extension XFree86-DRI
[ 103.502] (II) LoadModule: "dri2"
[ 103.503] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 103.503] (II) Module dri2: vendor="X.Org Foundation"
[ 103.503] compiled for 1.11.3, module version = 1.2.0
[ 103.503] ABI class: X.Org Server Extension, version 6.0
[ 103.503] (II) Loading extension DRI2
[ 103.503] (==) Matched intel as autoconfigured driver 0
[ 103.503] (==) Matched vesa as autoconfigured driver 1
[ 103.503] (==) Matched fbdev as autoconfigured driver 2
[ 103.503] (==) Assigned the driver to the xf86ConfigLayout
[ 103.503] (II) LoadModule: "intel"
[ 103.503] (WW) Warning, couldn't open module intel
[ 103.503] (II) UnloadModule: "intel"
[ 103.503] (II) Unloading intel
[ 103.503] (EE) Failed to load module "intel" (module does not exist, 0)
[ 103.503] (II) LoadModule: "vesa"
[ 103.503] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 103.504] (II) Module vesa: vendor="X.Org Foundation"
[ 103.504] compiled for 1.11.3, module version = 2.3.0
[ 103.504] Module class: X.Org Video Driver
[ 103.504] ABI class: X.Org Video Driver, version 11.0
[ 103.504] (II) LoadModule: "fbdev"
[ 103.504] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 103.504] (II) Module fbdev: vendor="X.Org Foundation"
[ 103.504] compiled for 1.11.3, module version = 0.4.2
[ 103.504] ABI class: X.Org Video Driver, version 11.0
[ 103.504] (==) Matched intel as autoconfigured driver 0
[ 103.504] (==) Matched vesa as autoconfigured driver 1
[ 103.504] (==) Matched fbdev as autoconfigured driver 2
[ 103.504] (==) Assigned the driver to the xf86ConfigLayout
[ 103.504] (II) LoadModule: "intel"
[ 103.504] (WW) Warning, couldn't open module intel
[ 103.504] (II) UnloadModule: "intel"
[ 103.504] (II) Unloading intel
[ 103.504] (EE) Failed to load module "intel" (module does not exist, 0)
[ 103.504] (II) LoadModule: "vesa"
[ 103.505] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 103.505] (II) Module vesa: vendor="X.Org Foundation"
[ 103.505] compiled for 1.11.3, module version = 2.3.0
[ 103.505] Module class: X.Org Video Driver
[ 103.505] ABI class: X.Org Video Driver, version 11.0
[ 103.505] (II) UnloadModule: "vesa"
[ 103.505] (II) Unloading vesa
[ 103.505] (II) Failed to load module "vesa" (already loaded, 0)
[ 103.505] (II) LoadModule: "fbdev"
[ 103.505] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 103.505] (II) Module fbdev: vendor="X.Org Foundation"
[ 103.505] compiled for 1.11.3, module version = 0.4.2
[ 103.505] ABI class: X.Org Video Driver, version 11.0
[ 103.505] (II) UnloadModule: "fbdev"
[ 103.505] (II) Unloading fbdev
[ 103.505] (II) Failed to load module "fbdev" (already loaded, 0)
[ 103.505] (II) VESA: driver for VESA chipsets: vesa
[ 103.505] (II) FBDEV: driver for framebuffer: fbdev
[ 103.505] (++) using VT number 7
[ 103.505] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 103.505] vesa: Ignoring device with a bound kernel driver
[ 103.505] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 103.505] vesa: Ignoring device with a bound kernel driver
[ 103.505] (WW) Falling back to old probe method for vesa
[ 103.505] (II) Loading sub module "fbdevhw"
[ 103.505] (II) LoadModule: "fbdevhw"
[ 103.506] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 103.506] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 103.506] compiled for 1.11.3, module version = 0.0.2
[ 103.506] ABI class: X.Org Video Driver, version 11.0
[ 103.506] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 103.506] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 103.506] (**) FBDEV(2): claimed PCI slot 0@0:2:0
[ 103.506] (II) FBDEV(2): using default device
[ 103.506] (II) FBDEV(2): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 103.506] (==) FBDEV(2): Depth 24, (==) framebuffer bpp 32
[ 103.506] (==) FBDEV(2): RGB weight 888
[ 103.506] (==) FBDEV(2): Default visual is TrueColor
[ 103.506] (==) FBDEV(2): Using gamma correction (1.0, 1.0, 1.0)
[ 103.506] (II) FBDEV(2): hardware: inteldrmfb (video memory: 4128kB)
[ 103.506] (II) FBDEV(2): checking modes against framebuffer device...
[ 103.506] (II) FBDEV(2): checking modes against monitor...
[ 103.506] (--) FBDEV(2): Virtual size is 1366x768 (pitch 1366)
[ 103.506] (**) FBDEV(2): Built-in mode "current"
[ 103.506] (==) FBDEV(2): DPI set to (96, 96)
[ 103.506] (II) Loading sub module "fb"
[ 103.506] (II) LoadModule: "fb"
[ 103.506] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 103.506] (II) Module fb: vendor="X.Org Foundation"
[ 103.506] compiled for 1.11.3, module version = 1.0.0
[ 103.506] ABI class: X.Org ANSI C Emulation, version 0.4
[ 103.506] (**) FBDEV(2): using shadow framebuffer
[ 103.506] (II) Loading sub module "shadow"
[ 103.506] (II) LoadModule: "shadow"
[ 103.507] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 103.507] (II) Module shadow: vendor="X.Org Foundation"
[ 103.507] compiled for 1.11.3, module version = 1.1.0
[ 103.507] ABI class: X.Org ANSI C Emulation, version 0.4
[ 103.507] (II) UnloadModule: "vesa"
[ 103.507] (II) Unloading vesa
[ 103.507] (II) UnloadModule: "vesa"
[ 103.507] (II) Unloading vesa
[ 103.507] (==) Depth 24 pixmap format is 32 bpp
[ 103.748] (==) FBDEV(0): Backing store disabled
[ 103.748] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.748] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.748] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.748] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.748] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.748] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.748] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.748] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.748] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.748] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.749] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.750] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (EE) FBDEV(0): FBIOPUTCMAP: Invalid argument
[ 103.751] (==) FBDEV(0): DPMS enabled
[ 103.751] (==) RandR enabled
[ 103.751] (II) Initializing built-in extension Generic Event Extension
[ 103.751] (II) Initializing built-in extension SHAPE
[ 103.751] (II) Initializing built-in extension MIT-SHM
[ 103.751] (II) Initializing built-in extension XInputExtension
[ 103.751] (II) Initializing built-in extension XTEST
[ 103.751] (II) Initializing built-in extension BIG-REQUESTS
[ 103.751] (II) Initializing built-in extension SYNC
[ 103.751] (II) Initializing built-in extension XKEYBOARD
[ 103.751] (II) Initializing built-in extension XC-MISC
[ 103.751] (II) Initializing built-in extension SECURITY
[ 103.751] (II) Initializing built-in extension XINERAMA
[ 103.751] (II) Initializing built-in extension XFIXES
[ 103.751] (II) Initializing built-in extension RENDER
[ 103.751] (II) Initializing built-in extension RANDR
[ 103.751] (II) Initializing built-in extension COMPOSITE
[ 103.751] (II) Initializing built-in extension DAMAGE
[ 103.757] (II) AIGLX: Screen 0 is not DRI2 capable
[ 103.757] (II) AIGLX: Screen 0 is not DRI capable
[ 103.772] (II) AIGLX: Loaded and initialized swrast
[ 103.772] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 103.789] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 103.793] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 103.793] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 103.793] (II) LoadModule: "evdev"
[ 103.793] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 103.793] (II) Module evdev: vendor="X.Org Foundation"
[ 103.793] compiled for 1.11.3, module version = 2.7.0
[ 103.793] Module class: X.Org XInput Driver
[ 103.793] ABI class: X.Org XInput driver, version 16.0
[ 103.793] (II) Using input driver 'evdev' for 'Power Button'
[ 103.793] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 103.793] (**) Power Button: always reports core events
[ 103.793] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 103.793] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 103.793] (--) evdev: Power Button: Found keys
[ 103.793] (II) evdev: Power Button: Configuring as keyboard
[ 103.793] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 103.793] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 103.793] (**) Option "xkb_rules" "evdev"
[ 103.793] (**) Option "xkb_model" "pc105"
[ 103.793] (**) Option "xkb_layout" "pl"
[ 103.797] (II) XKB: reuse xkmfile /var/lib/xkb/server-61818C6B46DD4F01AE1F641F27B555591612208F.xkm
[ 103.798] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 103.799] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 103.799] (II) Using input driver 'evdev' for 'Video Bus'
[ 103.799] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 103.799] (**) Video Bus: always reports core events
[ 103.799] (**) evdev: Video Bus: Device: "/dev/input/event8"
[ 103.799] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 103.799] (--) evdev: Video Bus: Found keys
[ 103.799] (II) evdev: Video Bus: Configuring as keyboard
[ 103.799] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8/event8"
[ 103.799] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 103.799] (**) Option "xkb_rules" "evdev"
[ 103.799] (**) Option "xkb_model" "pc105"
[ 103.799] (**) Option "xkb_layout" "pl"
[ 103.799] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 103.799] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 103.799] (II) Using input driver 'evdev' for 'Power Button'
[ 103.799] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 103.799] (**) Power Button: always reports core events
[ 103.800] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 103.800] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 103.800] (--) evdev: Power Button: Found keys
[ 103.800] (II) evdev: Power Button: Configuring as keyboard
[ 103.800] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0C:00/input/input0/event0"
[ 103.800] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 103.800] (**) Option "xkb_rules" "evdev"
[ 103.800] (**) Option "xkb_model" "pc105"
[ 103.800] (**) Option "xkb_layout" "pl"
[ 103.800] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 103.800] (II) No input driver specified, ignoring this device.
[ 103.800] (II) This device may have been added with another device file.
[ 103.801] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 103.801] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 103.801] (II) Using input driver 'evdev' for 'Sleep Button'
[ 103.801] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 103.801] (**) Sleep Button: always reports core events
[ 103.801] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 103.801] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 103.801] (--) evdev: Sleep Button: Found keys
[ 103.801] (II) evdev: Sleep Button: Configuring as keyboard
[ 103.801] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0E:00/input/input2/event2"
[ 103.801] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 103.801] (**) Option "xkb_rules" "evdev"
[ 103.801] (**) Option "xkb_model" "pc105"
[ 103.801] (**) Option "xkb_layout" "pl"
[ 103.802] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
[ 103.802] (II) No input driver specified, ignoring this device.
[ 103.802] (II) This device may have been added with another device file.
[ 103.802] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
[ 103.802] (II) No input driver specified, ignoring this device.
[ 103.802] (II) This device may have been added with another device file.
[ 103.802] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event5)
[ 103.802] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 103.802] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 103.802] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 103.802] (**) Logitech USB Receiver: always reports core events
[ 103.802] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event5"
[ 103.802] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 103.802] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 103.802] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 103.802] (--) evdev: Logitech USB Receiver: Found relative axes
[ 103.802] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 103.802] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 103.802] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 103.803] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 103.803] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 103.803] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0/input/input5/event5"
[ 103.803] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[ 103.803] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 103.803] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 103.803] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 103.803] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 103.803] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 103.803] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 103.803] (II) No input driver specified, ignoring this device.
[ 103.803] (II) This device may have been added with another device file.
[ 103.804] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event6)
[ 103.804] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 103.804] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 103.804] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 103.804] (**) Logitech USB Receiver: always reports core events
[ 103.804] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event6"
[ 103.804] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 103.804] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 103.804] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 103.804] (--) evdev: Logitech USB Receiver: Found relative axes
[ 103.804] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 103.804] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 103.804] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 103.804] (--) evdev: Logitech USB Receiver: Found keys
[ 103.804] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 103.804] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 103.804] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 103.804] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 103.804] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 103.804] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.1/input/input6/event6"
[ 103.804] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[ 103.804] (**) Option "xkb_rules" "evdev"
[ 103.804] (**) Option "xkb_model" "pc105"
[ 103.804] (**) Option "xkb_layout" "pl"
[ 103.805] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 103.805] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 103.805] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 103.805] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 103.805] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 103.805] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 103.805] (II) config/udev: Adding input device Video WebCam (/dev/input/event7)
[ 103.805] (**) Video WebCam: Applying InputClass "evdev keyboard catchall"
[ 103.805] (II) Using input driver 'evdev' for 'Video WebCam'
[ 103.805] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 103.805] (**) Video WebCam: always reports core events
[ 103.805] (**) evdev: Video WebCam: Device: "/dev/input/event7"
[ 103.806] (--) evdev: Video WebCam: Vendor 0x64e Product 0xa103
[ 103.806] (--) evdev: Video WebCam: Found keys
[ 103.806] (II) evdev: Video WebCam: Configuring as keyboard
[ 103.806] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input7/event7"
[ 103.806] (II) XINPUT: Adding extended input device "Video WebCam" (type: KEYBOARD, id 12)
[ 103.806] (**) Option "xkb_rules" "evdev"
[ 103.806] (**) Option "xkb_model" "pc105"
[ 103.806] (**) Option "xkb_layout" "pl"
[ 103.806] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 103.806] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 103.806] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 103.806] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 103.806] (**) AT Translated Set 2 keyboard: always reports core events
[ 103.806] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[ 103.806] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 103.806] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 103.806] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 103.807] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 103.807] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 103.807] (**) Option "xkb_rules" "evdev"
[ 103.807] (**) Option "xkb_model" "pc105"
[ 103.807] (**) Option "xkb_layout" "pl"
[ 103.807] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[ 103.807] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 103.807] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 103.807] (II) LoadModule: "synaptics"
[ 103.808] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 103.808] (II) Module synaptics: vendor="X.Org Foundation"
[ 103.808] compiled for 1.11.3, module version = 1.6.2
[ 103.808] Module class: X.Org XInput Driver
[ 103.808] ABI class: X.Org XInput driver, version 16.0
[ 103.808] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 103.808] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 103.808] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 103.808] (**) Option "Device" "/dev/input/event11"
[ 103.824] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5772
[ 103.824] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5086
[ 103.824] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 103.824] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 103.824] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
[ 103.824] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 103.824] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 103.824] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 103.828] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[ 103.828] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 103.828] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 103.828] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 103.828] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.035
[ 103.828] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 103.828] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 103.828] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 103.828] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 103.828] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 103.829] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 103.829] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 115.631] (II) XKB: reuse xkmfile /var/lib/xkb/server-A08FD83AD8727839541EF8306FA3BE9378B423D0.xkmOffline
#6 2013-01-31 13:30:44
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode
Nie masz włączonej akceleracji sprzętowej i do tego masz burdel w sterownikach.
Offline
#7 2013-01-31 13:37:53
Bitels - Użytkownik
- Bitels
- Użytkownik
- Zarejestrowany: 2012-10-31
Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode
No ok a mógł bym prosić o jakiś pomysł jak naprawić ten stan rzeczy?
Offline
#8 2013-01-31 13:41:00
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode
Pokaż co masz zainstalowane:
Kod:
dpkg -l|egrep 'glx|mesa|intel'
i
Kod:
cat /etc/X11/xorg.conf
Offline
#9 2013-01-31 13:45:58
Bitels - Użytkownik
- Bitels
- Użytkownik
- Zarejestrowany: 2012-10-31
Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode
xorg.conf jak to w ubuntu bywa brak.wygenerować?
Kod:
dpkg -l|egrep 'glx|mesa|intel' ii libdrm-intel1 2.4.39-0ubuntu0.1 Userspace interface to intel-specific kernel DRM services -- runtime ii libdrm-intel1:i386 2.4.39-0ubuntu0.1 Userspace interface to intel-specific kernel DRM services -- runtime ii libgl1-mesa-dri 8.0.4-0ubuntu0.3 free implementation of the OpenGL API -- DRI modules ii libgl1-mesa-dri:i386 8.0.4-0ubuntu0.3 free implementation of the OpenGL API -- DRI modules ii libgl1-mesa-glx 8.0.4-0ubuntu0.3 free implementation of the OpenGL API -- GLX runtime ii libgl1-mesa-glx:i386 8.0.4-0ubuntu0.3 free implementation of the OpenGL API -- GLX runtime ii libglapi-mesa 8.0.4-0ubuntu0.3 free implementation of the GL API -- shared library ii libglapi-mesa:i386 8.0.4-0ubuntu0.3 free implementation of the GL API -- shared library ii libglu1-mesa 8.0.4-0ubuntu0.3 Mesa OpenGL utility library (GLU) ii libglu1-mesa:i386 8.0.4-0ubuntu0.3 Mesa OpenGL utility library (GLU) ii libosmesa6 8.0.4-0ubuntu0.3 Mesa Off-screen rendering extension ii libosmesa6:i386 8.0.4-0ubuntu0.3 Mesa Off-screen rendering extension ii libxcb-glx0 1.8.1-1ubuntu0.1 X C Binding, glx extension ii libxcb-glx0:i386 1.8.1-1ubuntu0.1 X C Binding, glx extension ii mesa-utils 8.0.1+git20110129+d8f7d6b-0ubuntu2 Miscellaneous Mesa GL utilities
Offline
#10 2013-01-31 13:48:12
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode
A gdzie masz xserver-xorg-video-intel?
Pliku xorg.conf ma nie być.
Ostatnio edytowany przez yossarian (2013-01-31 13:49:35)
Offline
#11 2013-01-31 13:51:02
Bitels - Użytkownik
- Bitels
- Użytkownik
- Zarejestrowany: 2012-10-31
Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode
odinstalowałem... jak był zainstalowany miałem czarny ekran...
Offline
#12 2013-01-31 13:54:17
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode
[quote=Bitels]odinstalowałem... jak był zainstalowany miałem czarny ekran...[/quote]
:)
No to co się dziwisz że Ci GNOME nie trybi?
Offline
#13 2013-01-31 14:18:36
Bitels - Użytkownik
- Bitels
- Użytkownik
- Zarejestrowany: 2012-10-31
Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode
hehe no dobra zainstalowalem i mam czarny ekran... znowu... jedyna opcja to crl+alt+f1 a następnie crl+alt+del i przy uruchomieniu wpisanie w grub "nomodeset" ale wtedy chyba wlasnie nie odpala sie na sterownikach intela?
Offline
#14 2013-01-31 14:22:52
ArnVaker - Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode
Wrzuć loga z tego podniesienia kończącego się czarnym ekranem.
[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]
Offline
#15 2013-01-31 14:25:36
Bitels - Użytkownik
- Bitels
- Użytkownik
- Zarejestrowany: 2012-10-31
Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode
tylko jak... nie moge nic zrobić... w konsoli też czarny ekran... boot z live cd i wkleić loga?
Offline
#16 2013-01-31 14:28:23
Jacekalex - Podobno człowiek...;)
- Jacekalex
- Podobno człowiek...;)
- Skąd: /dev/urandom
- Zarejestrowany: 2008-01-07
Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode
co dziwne po odpaleniu komendy z palca [b]gnome-shell --replace odpala sie tak jak trzeba[/b] tylko dlaczego po wybraniu w lightdm uruchamia się fallback?[/quote]
Nie mogłeś tego od razu napisać?
xserver-xorg-video-intel rzeczywiście by się przydał, ale z drugiej strony od roku słyszę, jak się miłośnicy ziółek z teamu Gnome się chwalą, że Shell i Mutter działają na Gallium i llvmpipe, nawet z tej okazji wywalili w ogóle tryb fallback
z nowego Gnome - podobno w przeciwieństwie do NM i PA, nie był już potrzebny ;)
Widać przy tym, że problemem nie jest Gnome-Shell, tylko Lightdm jest walnięty, - nie podnosi Gshell jak trzeba.
Jak koniecznie musi być ta wersja *buntu, to ja bym spróbował wywalić LightDM
i wsadzić w jego miejsce GDM3 - ten przynajmniej powinien obsługiwać Gnome normalnie ( w Wheezym nie było z tym problemu).
Względnie, jakby nic innego nie pomogło, zamiast managera logowania można poodnosić system automatycznie z konsoli albo przez jakiś konsolowy manager logowania, i niech Xorg podnosi Gshell z ~/.xinitrc..
To też jest jakieś rozwiązanie.
Pozdrawiam
;-)Ostatnio edytowany przez Jacekalex (2013-01-31 15:34:42)
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)
Offline
#17 2013-01-31 14:29:20
ArnVaker - Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode
Albo restart i odpalenie z nomodeset jak pisałeś. Log z poprzedniego uruchomienia powinien być wtedy jako Xorg.0.log.old (jeśli się zapisał w ogóle).
[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]
Offline
#18 2013-01-31 14:30:48
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode
@Jacekalex:
Ale to chyba w nowszych GNOME. Nie wiem jaki jest w Ubuntu, a tym bardziej jak tam działa ;)
Zresztą to i tak bez sensu w tym przypadku bo na tej karcie ma działać zwykła akceleracja.
Ostatnio edytowany przez yossarian (2013-01-31 14:31:20)
Offline
#19 2013-01-31 14:40:12
Bitels - Użytkownik
- Bitels
- Użytkownik
- Zarejestrowany: 2012-10-31
Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode
ok zrobiłem jak Arn polecał. Pytanie co dalej?
Kod:
[ 15.817]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[ 15.817] X Protocol Version 11, Revision 0
[ 15.817] Build Operating System: Linux 2.6.42-23-generic x86_64 Ubuntu
[ 15.817] Current Operating System: Linux ubuntu 3.2.0-36-generic #57-Ubuntu SMP Tue Jan 8 21:44:52 UTC 2013 x86_64
[ 15.817] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-36-generic root=UUID=036a3c6a-b2c2-426f-8551-380458f64c7a ro acpi_osi=
[ 15.817] Build Date: 29 August 2012 12:12:33AM
[ 15.817] xorg-server 2:1.11.4-0ubuntu10.8 (For technical support please see http://www.ubuntu.com/support)
[ 15.817] Current version of pixman: 0.24.4
[ 15.817] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 15.817] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 15.817] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 31 14:33:35 2013
[ 15.825] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 15.826] (==) No Layout section. Using the first Screen section.
[ 15.826] (==) No screen section available. Using defaults.
[ 15.826] (**) |-->Screen "Default Screen Section" (0)
[ 15.826] (**) | |-->Monitor "<default monitor>"
[ 15.826] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 15.826] (==) Automatically adding devices
[ 15.826] (==) Automatically enabling devices
[ 15.826] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 15.826] Entry deleted from font path.
[ 15.826] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 15.826] Entry deleted from font path.
[ 15.826] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 15.826] Entry deleted from font path.
[ 15.826] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 15.826] Entry deleted from font path.
[ 15.826] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 15.826] Entry deleted from font path.
[ 15.826] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 15.826] Entry deleted from font path.
[ 15.826] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 15.826] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 15.826] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 15.826] (II) Loader magic: 0x7f4d15c9eb00
[ 15.826] (II) Module ABI versions:
[ 15.826] X.Org ANSI C Emulation: 0.4
[ 15.826] X.Org Video Driver: 11.0
[ 15.826] X.Org XInput driver : 16.0
[ 15.826] X.Org Server Extension : 6.0
[ 15.827] (--) PCI:*(0:0:2:0) 8086:2a42:1025:0212 rev 9, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x000050f0/8
[ 15.827] (--) PCI: (0:0:2:1) 8086:2a43:1025:0212 rev 9, Mem @ 0xd3400000/1048576
[ 15.827] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 15.827] (II) LoadModule: "extmod"
[ 15.830] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 15.830] (II) Module extmod: vendor="X.Org Foundation"
[ 15.830] compiled for 1.11.3, module version = 1.0.0
[ 15.830] Module class: X.Org Server Extension
[ 15.830] ABI class: X.Org Server Extension, version 6.0
[ 15.830] (II) Loading extension MIT-SCREEN-SAVER
[ 15.830] (II) Loading extension XFree86-VidModeExtension
[ 15.830] (II) Loading extension XFree86-DGA
[ 15.830] (II) Loading extension DPMS
[ 15.830] (II) Loading extension XVideo
[ 15.830] (II) Loading extension XVideo-MotionCompensation
[ 15.830] (II) Loading extension X-Resource
[ 15.830] (II) LoadModule: "dbe"
[ 15.830] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 15.830] (II) Module dbe: vendor="X.Org Foundation"
[ 15.830] compiled for 1.11.3, module version = 1.0.0
[ 15.830] Module class: X.Org Server Extension
[ 15.830] ABI class: X.Org Server Extension, version 6.0
[ 15.830] (II) Loading extension DOUBLE-BUFFER
[ 15.830] (II) LoadModule: "glx"
[ 15.831] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 15.831] (II) Module glx: vendor="X.Org Foundation"
[ 15.831] compiled for 1.11.3, module version = 1.0.0
[ 15.831] ABI class: X.Org Server Extension, version 6.0
[ 15.831] (==) AIGLX enabled
[ 15.831] (II) Loading extension GLX
[ 15.831] (II) LoadModule: "record"
[ 15.831] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 15.831] (II) Module record: vendor="X.Org Foundation"
[ 15.831] compiled for 1.11.3, module version = 1.13.0
[ 15.831] Module class: X.Org Server Extension
[ 15.831] ABI class: X.Org Server Extension, version 6.0
[ 15.831] (II) Loading extension RECORD
[ 15.831] (II) LoadModule: "dri"
[ 15.831] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 15.832] (II) Module dri: vendor="X.Org Foundation"
[ 15.832] compiled for 1.11.3, module version = 1.0.0
[ 15.832] ABI class: X.Org Server Extension, version 6.0
[ 15.832] (II) Loading extension XFree86-DRI
[ 15.832] (II) LoadModule: "dri2"
[ 15.832] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 15.832] (II) Module dri2: vendor="X.Org Foundation"
[ 15.832] compiled for 1.11.3, module version = 1.2.0
[ 15.832] ABI class: X.Org Server Extension, version 6.0
[ 15.832] (II) Loading extension DRI2
[ 15.832] (==) Matched intel as autoconfigured driver 0
[ 15.832] (==) Matched vesa as autoconfigured driver 1
[ 15.832] (==) Matched fbdev as autoconfigured driver 2
[ 15.832] (==) Assigned the driver to the xf86ConfigLayout
[ 15.832] (II) LoadModule: "intel"
[ 15.832] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 15.848] (II) Module intel: vendor="X.Org Foundation"
[ 15.848] compiled for 1.11.3, module version = 2.17.0
[ 15.848] Module class: X.Org Video Driver
[ 15.848] ABI class: X.Org Video Driver, version 11.0
[ 15.848] (II) LoadModule: "vesa"
[ 15.848] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 15.848] (II) Module vesa: vendor="X.Org Foundation"
[ 15.848] compiled for 1.11.3, module version = 2.3.0
[ 15.848] Module class: X.Org Video Driver
[ 15.848] ABI class: X.Org Video Driver, version 11.0
[ 15.848] (II) LoadModule: "fbdev"
[ 15.862] (WW) Warning, couldn't open module fbdev
[ 15.862] (II) UnloadModule: "fbdev"
[ 15.862] (II) Unloading fbdev
[ 15.862] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 15.862] (==) Matched intel as autoconfigured driver 0
[ 15.862] (==) Matched vesa as autoconfigured driver 1
[ 15.862] (==) Matched fbdev as autoconfigured driver 2
[ 15.862] (==) Assigned the driver to the xf86ConfigLayout
[ 15.863] (II) LoadModule: "intel"
[ 15.863] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 15.863] (II) Module intel: vendor="X.Org Foundation"
[ 15.863] compiled for 1.11.3, module version = 2.17.0
[ 15.863] Module class: X.Org Video Driver
[ 15.863] ABI class: X.Org Video Driver, version 11.0
[ 15.863] (II) UnloadModule: "intel"
[ 15.863] (II) Unloading intel
[ 15.863] (II) Failed to load module "intel" (already loaded, 32589)
[ 15.863] (II) LoadModule: "vesa"
[ 15.863] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 15.863] (II) Module vesa: vendor="X.Org Foundation"
[ 15.863] compiled for 1.11.3, module version = 2.3.0
[ 15.863] Module class: X.Org Video Driver
[ 15.863] ABI class: X.Org Video Driver, version 11.0
[ 15.863] (II) UnloadModule: "vesa"
[ 15.863] (II) Unloading vesa
[ 15.863] (II) Failed to load module "vesa" (already loaded, 32589)
[ 15.863] (II) LoadModule: "fbdev"
[ 15.863] (WW) Warning, couldn't open module fbdev
[ 15.863] (II) UnloadModule: "fbdev"
[ 15.863] (II) Unloading fbdev
[ 15.864] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 15.864] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 15.864] (II) VESA: driver for VESA chipsets: vesa
[ 15.864] (++) using VT number 7
[ 15.866] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 15.866] (WW) Falling back to old probe method for vesa
[ 15.866] drmOpenDevice: node name is /dev/dri/card0
[ 15.866] drmOpenDevice: open result is 8, (OK)
[ 15.866] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 15.866] drmOpenDevice: node name is /dev/dri/card0
[ 15.866] drmOpenDevice: open result is 8, (OK)
[ 15.867] drmOpenByBusid: drmOpenMinor returns 8
[ 15.867] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 15.867] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 15.867] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 15.867] (==) intel(0): RGB weight 888
[ 15.867] (==) intel(0): Default visual is TrueColor
[ 15.867] (II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
[ 15.867] (--) intel(0): Chipset: "GM45"
[ 15.867] (**) intel(0): Relaxed fencing enabled
[ 15.867] (**) intel(0): Wait on SwapBuffers? enabled
[ 15.867] (**) intel(0): Triple buffering? enabled
[ 15.867] (**) intel(0): Framebuffer tiled
[ 15.867] (**) intel(0): Pixmaps tiled
[ 15.867] (**) intel(0): 3D buffers tiled
[ 15.867] (**) intel(0): SwapBuffers wait enabled
[ 15.867] (==) intel(0): video overlay key set to 0x101fe
[ 15.867] (II) intel(0): Output LVDS1 has no monitor section
[ 15.964] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 15.980] (II) intel(0): Output VGA1 has no monitor section
[ 16.028] (II) intel(0): Output DP1 has no monitor section
[ 16.028] (II) intel(0): EDID for output LVDS1
[ 16.028] (II) intel(0): Manufacturer: SEC Model: 3046 Serial#: 0
[ 16.028] (II) intel(0): Year: 2008 Week: 0
[ 16.028] (II) intel(0): EDID Version: 1.3
[ 16.028] (II) intel(0): Digital Display Input
[ 16.028] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 16.028] (II) intel(0): Gamma: 2.20
[ 16.028] (II) intel(0): No DPMS capabilities specified
[ 16.028] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 16.028] (II) intel(0): First detailed timing is preferred mode
[ 16.028] (II) intel(0): redX: 0.620 redY: 0.355 greenX: 0.300 greenY: 0.580
[ 16.028] (II) intel(0): blueX: 0.150 blueY: 0.090 whiteX: 0.313 whiteY: 0.329
[ 16.028] (II) intel(0): Manufacturer's mask: 0
[ 16.028] (II) intel(0): Supported detailed timing:
[ 16.028] (II) intel(0): clock: 72.3 MHz Image Size: 344 x 193 mm
[ 16.028] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1526 h_border: 0
[ 16.028] (II) intel(0): v_active: 768 v_sync: 770 v_sync_end 775 v_blanking: 790 v_border: 0
[ 16.028] (II) intel(0): Unknown vendor-specific block f
[ 16.028] (II) intel(0): SAMSUNG
[ 16.028] (II) intel(0): 156AT01-A01
[ 16.028] (II) intel(0): EDID (in hex):
[ 16.028] (II) intel(0): 00ffffffffffff004ca3463000000000
[ 16.028] (II) intel(0): 00120103802213780ace859e5b4c9426
[ 16.028] (II) intel(0): 17505400000001010101010101010101
[ 16.028] (II) intel(0): 010101010101411c56a0500016303020
[ 16.028] (II) intel(0): 250058c1100000190000000f00000000
[ 16.028] (II) intel(0): 00000000001eb4027400000000fe0053
[ 16.028] (II) intel(0): 414d53554e470a2020202020000000fe
[ 16.028] (II) intel(0): 00313536415430312d4130310a2000f1
[ 16.028] (II) intel(0): EDID vendor "SEC", prod id 12358
[ 16.028] (II) intel(0): Printing DDC gathered Modelines:
[ 16.028] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz)
[ 16.028] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 16.028] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 16.028] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 16.028] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 16.028] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 16.028] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 16.028] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 16.028] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 16.028] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 16.028] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 16.028] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 16.028] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 16.028] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 16.028] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 16.028] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 16.028] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 16.028] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 16.028] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 16.028] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 16.028] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 16.028] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 16.028] (II) intel(0): Printing probed modes for output LVDS1
[ 16.029] (II) intel(0): Modeline "1366x768"x60.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz)
[ 16.029] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 16.029] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz)
[ 16.029] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 16.029] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 16.029] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 16.029] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 16.044] (II) intel(0): EDID for output VGA1
[ 16.092] (II) intel(0): EDID for output DP1
[ 16.092] (II) intel(0): Output LVDS1 connected
[ 16.092] (II) intel(0): Output VGA1 disconnected
[ 16.092] (II) intel(0): Output DP1 disconnected
[ 16.092] (II) intel(0): Using exact sizes for initial modes
[ 16.092] (II) intel(0): Output LVDS1 using initial mode 1366x768
[ 16.092] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 16.092] (II) intel(0): Kernel page flipping support detected, enabling
[ 16.092] (**) intel(0): Display dimensions: (340, 190) mm
[ 16.092] (**) intel(0): DPI set to (102, 102)
[ 16.092] (II) Loading sub module "fb"
[ 16.092] (II) LoadModule: "fb"
[ 16.092] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 16.092] (II) Module fb: vendor="X.Org Foundation"
[ 16.092] compiled for 1.11.3, module version = 1.0.0
[ 16.092] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.092] (II) Loading sub module "dri2"
[ 16.092] (II) LoadModule: "dri2"
[ 16.092] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 16.092] (II) Module dri2: vendor="X.Org Foundation"
[ 16.092] compiled for 1.11.3, module version = 1.2.0
[ 16.092] ABI class: X.Org Server Extension, version 6.0
[ 16.092] (II) UnloadModule: "vesa"
[ 16.092] (II) Unloading vesa
[ 16.092] (==) Depth 24 pixmap format is 32 bpp
[ 16.092] (II) intel(0): [DRI2] Setup complete
[ 16.092] (II) intel(0): [DRI2] DRI driver: i965
[ 16.093] (II) intel(0): Allocated new frame buffer 1408x768 stride 5632, tiled
[ 16.103] (II) UXA(0): Driver registered support for the following operations:
[ 16.103] (II) solid
[ 16.103] (II) copy
[ 16.103] (II) composite (RENDER acceleration)
[ 16.103] (II) put_image
[ 16.103] (II) get_image
[ 16.103] (==) intel(0): Backing store disabled
[ 16.103] (==) intel(0): Silken mouse enabled
[ 16.104] (II) intel(0): Initializing HW Cursor
[ 16.124] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 16.125] (==) intel(0): DPMS enabled
[ 16.125] (==) intel(0): Intel XvMC decoder enabled
[ 16.126] (II) intel(0): Set up textured video
[ 16.126] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 16.126] (II) intel(0): direct rendering: DRI2 Enabled
[ 16.126] (==) intel(0): hotplug detection: "enabled"
[ 16.126] (--) RandR disabled
[ 16.126] (II) Initializing built-in extension Generic Event Extension
[ 16.126] (II) Initializing built-in extension SHAPE
[ 16.126] (II) Initializing built-in extension MIT-SHM
[ 16.126] (II) Initializing built-in extension XInputExtension
[ 16.126] (II) Initializing built-in extension XTEST
[ 16.126] (II) Initializing built-in extension BIG-REQUESTS
[ 16.126] (II) Initializing built-in extension SYNC
[ 16.126] (II) Initializing built-in extension XKEYBOARD
[ 16.126] (II) Initializing built-in extension XC-MISC
[ 16.126] (II) Initializing built-in extension SECURITY
[ 16.126] (II) Initializing built-in extension XINERAMA
[ 16.126] (II) Initializing built-in extension XFIXES
[ 16.126] (II) Initializing built-in extension RENDER
[ 16.126] (II) Initializing built-in extension RANDR
[ 16.126] (II) Initializing built-in extension COMPOSITE
[ 16.126] (II) Initializing built-in extension DAMAGE
[ 16.164] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 16.164] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 16.164] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 16.164] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 16.164] (II) AIGLX: Loaded and initialized i965
[ 16.164] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 16.164] (II) intel(0): Setting screen physical size to 361 x 203
[ 16.186] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 16.189] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 16.189] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.189] (II) LoadModule: "evdev"
[ 16.189] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.190] (II) Module evdev: vendor="X.Org Foundation"
[ 16.190] compiled for 1.11.3, module version = 2.7.0
[ 16.190] Module class: X.Org XInput Driver
[ 16.190] ABI class: X.Org XInput driver, version 16.0
[ 16.190] (II) Using input driver 'evdev' for 'Power Button'
[ 16.190] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.190] (**) Power Button: always reports core events
[ 16.190] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 16.190] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.190] (--) evdev: Power Button: Found keys
[ 16.190] (II) evdev: Power Button: Configuring as keyboard
[ 16.190] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 16.190] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 16.190] (**) Option "xkb_rules" "evdev"
[ 16.190] (**) Option "xkb_model" "pc105"
[ 16.190] (**) Option "xkb_layout" "pl"
[ 16.192] (II) XKB: reuse xkmfile /var/lib/xkb/server-61818C6B46DD4F01AE1F641F27B555591612208F.xkm
[ 16.193] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 16.193] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 16.193] (II) Using input driver 'evdev' for 'Video Bus'
[ 16.193] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.193] (**) Video Bus: always reports core events
[ 16.193] (**) evdev: Video Bus: Device: "/dev/input/event8"
[ 16.193] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 16.193] (--) evdev: Video Bus: Found keys
[ 16.193] (II) evdev: Video Bus: Configuring as keyboard
[ 16.193] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input8/event8"
[ 16.193] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 16.193] (**) Option "xkb_rules" "evdev"
[ 16.193] (**) Option "xkb_model" "pc105"
[ 16.193] (**) Option "xkb_layout" "pl"
[ 16.194] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 16.194] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.194] (II) Using input driver 'evdev' for 'Power Button'
[ 16.194] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.194] (**) Power Button: always reports core events
[ 16.194] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 16.194] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.194] (--) evdev: Power Button: Found keys
[ 16.194] (II) evdev: Power Button: Configuring as keyboard
[ 16.194] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0C:00/input/input0/event0"
[ 16.194] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 16.194] (**) Option "xkb_rules" "evdev"
[ 16.194] (**) Option "xkb_model" "pc105"
[ 16.194] (**) Option "xkb_layout" "pl"
[ 16.195] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 16.195] (II) No input driver specified, ignoring this device.
[ 16.195] (II) This device may have been added with another device file.
[ 16.195] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 16.195] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 16.195] (II) Using input driver 'evdev' for 'Sleep Button'
[ 16.195] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.195] (**) Sleep Button: always reports core events
[ 16.195] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[ 16.195] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 16.195] (--) evdev: Sleep Button: Found keys
[ 16.195] (II) evdev: Sleep Button: Configuring as keyboard
[ 16.195] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0c/PNP0C0E:00/input/input2/event2"
[ 16.195] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 16.195] (**) Option "xkb_rules" "evdev"
[ 16.195] (**) Option "xkb_model" "pc105"
[ 16.195] (**) Option "xkb_layout" "pl"
[ 16.196] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event10)
[ 16.196] (II) No input driver specified, ignoring this device.
[ 16.196] (II) This device may have been added with another device file.
[ 16.196] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event9)
[ 16.196] (II) No input driver specified, ignoring this device.
[ 16.196] (II) This device may have been added with another device file.
[ 16.197] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event5)
[ 16.197] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 16.197] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 16.197] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.197] (**) Logitech USB Receiver: always reports core events
[ 16.197] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event5"
[ 16.197] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 16.197] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 16.197] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 16.197] (--) evdev: Logitech USB Receiver: Found relative axes
[ 16.197] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 16.197] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 16.197] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 16.197] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 16.197] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 16.197] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.0/input/input5/event5"
[ 16.197] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[ 16.197] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 16.197] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 16.197] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 16.197] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 16.197] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 16.198] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 16.198] (II) No input driver specified, ignoring this device.
[ 16.198] (II) This device may have been added with another device file.
[ 16.198] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event6)
[ 16.198] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 16.198] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 16.198] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.198] (**) Logitech USB Receiver: always reports core events
[ 16.198] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event6"
[ 16.198] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 16.198] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 16.198] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 16.198] (--) evdev: Logitech USB Receiver: Found relative axes
[ 16.198] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 16.198] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 16.198] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 16.198] (--) evdev: Logitech USB Receiver: Found keys
[ 16.198] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 16.198] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 16.198] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 16.198] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 16.198] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 16.199] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1:1.1/input/input6/event6"
[ 16.199] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[ 16.199] (**) Option "xkb_rules" "evdev"
[ 16.199] (**) Option "xkb_model" "pc105"
[ 16.199] (**) Option "xkb_layout" "pl"
[ 16.199] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 16.199] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 16.199] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 16.199] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 16.199] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 16.199] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 16.199] (II) config/udev: Adding input device Video WebCam (/dev/input/event7)
[ 16.200] (**) Video WebCam: Applying InputClass "evdev keyboard catchall"
[ 16.200] (II) Using input driver 'evdev' for 'Video WebCam'
[ 16.200] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.200] (**) Video WebCam: always reports core events
[ 16.200] (**) evdev: Video WebCam: Device: "/dev/input/event7"
[ 16.200] (--) evdev: Video WebCam: Vendor 0x64e Product 0xa103
[ 16.200] (--) evdev: Video WebCam: Found keys
[ 16.200] (II) evdev: Video WebCam: Configuring as keyboard
[ 16.200] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input7/event7"
[ 16.200] (II) XINPUT: Adding extended input device "Video WebCam" (type: KEYBOARD, id 12)
[ 16.200] (**) Option "xkb_rules" "evdev"
[ 16.200] (**) Option "xkb_model" "pc105"
[ 16.200] (**) Option "xkb_layout" "pl"
[ 16.200] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 16.200] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 16.200] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 16.200] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.201] (**) AT Translated Set 2 keyboard: always reports core events
[ 16.201] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[ 16.201] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 16.201] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 16.201] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 16.201] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 16.201] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 16.201] (**) Option "xkb_rules" "evdev"
[ 16.201] (**) Option "xkb_model" "pc105"
[ 16.201] (**) Option "xkb_layout" "pl"
[ 16.201] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[ 16.201] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 16.201] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 16.201] (II) LoadModule: "synaptics"
[ 16.202] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 16.202] (II) Module synaptics: vendor="X.Org Foundation"
[ 16.202] compiled for 1.11.3, module version = 1.6.2
[ 16.202] Module class: X.Org XInput Driver
[ 16.202] ABI class: X.Org XInput driver, version 16.0
[ 16.202] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 16.202] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 16.202] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 16.202] (**) Option "Device" "/dev/input/event11"
[ 16.204] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5772
[ 16.204] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5086
[ 16.204] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 16.204] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 16.204] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right
[ 16.204] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 16.204] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 16.204] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 16.212] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[ 16.212] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 16.212] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 16.212] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 16.212] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.035
[ 16.212] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 16.212] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 16.212] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 16.212] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 16.212] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 16.212] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 16.212] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 16.750] (II) intel(0): EDID vendor "SEC", prod id 12358
[ 16.750] (II) intel(0): Printing DDC gathered Modelines:
[ 16.750] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz)
[ 20.318] (II) intel(0): EDID vendor "SEC", prod id 12358
[ 20.318] (II) intel(0): Printing DDC gathered Modelines:
[ 20.318] (II) intel(0): Modeline "1366x768"x0.0 72.33 1366 1414 1446 1526 768 770 775 790 -hsync -vsync (47.4 kHz)
[ 94.916] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 100.534] (II) UnloadModule: "synaptics"
[ 100.534] (II) Unloading synaptics
[ 100.534] (II) evdev: AT Translated Set 2 keyboard: Close
[ 100.534] (II) UnloadModule: "evdev"
[ 100.534] (II) Unloading evdev
[ 100.534] (II) evdev: Video WebCam: Close
[ 100.534] (II) UnloadModule: "evdev"
[ 100.534] (II) Unloading evdev
[ 100.534] (II) evdev: Logitech USB Receiver: Close
[ 100.534] (II) UnloadModule: "evdev"
[ 100.534] (II) Unloading evdev
[ 100.534] (II) evdev: Logitech USB Receiver: Close
[ 100.534] (II) UnloadModule: "evdev"
[ 100.534] (II) Unloading evdev
[ 100.535] (II) evdev: Sleep Button: Close
[ 100.535] (II) UnloadModule: "evdev"
[ 100.535] (II) Unloading evdev
[ 100.535] (II) evdev: Power Button: Close
[ 100.535] (II) UnloadModule: "evdev"
[ 100.535] (II) Unloading evdev
[ 100.535] (II) evdev: Video Bus: Close
[ 100.535] (II) UnloadModule: "evdev"
[ 100.535] (II) Unloading evdev
[ 100.535] (II) evdev: Power Button: Close
[ 100.535] (II) UnloadModule: "evdev"
[ 100.535] (II) Unloading evdev
[ 100.553] ddxSigGiveUp: Closing log
[ 100.553] Server terminated successfully (0). Closing log file.Offline
#20 2013-01-31 14:46:08
Jacekalex - Podobno człowiek...;)
- Jacekalex
- Podobno człowiek...;)
- Skąd: /dev/urandom
- Zarejestrowany: 2008-01-07
Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode
Ja natomiast wiem, jaki "udany" jest Ubuntu-12.04, co widać choćby przy zainstalowanym xorg-video-intel, i pod Gnome-3 brałbym najświeższą możliwą stabilną wersję systemu i Gnome.
Zwłaszcza, że mamy tu typowo "buntowy" folklor Xorga:
[ 103.498] Build Operating System: [b]Linux 2.6.42-23-generic x86_64[/b] Ubuntu[/quote]
W tym jaju była zupełnie inna wersja KMSu i sterów niż w tym:[ 103.498] Current Operating System: Linux ubuntu [b]3.2.0-36-generic[/b] #57-Ubuntu SMP Tue Jan 8 21:44:52 UTC 2013 x86_64[/quote]
To może tłumaczyć kłopoty z KMSem i Intelem.
Pomiędzy 2.6.42 a 3.2 było kila małych "rewolucji" w podsystemie graficznym kernela, KMS i sterach Intela.Ostatnio edytowany przez Jacekalex (2013-01-31 15:08:16)
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)Offline
#21 2013-01-31 14:53:24
ArnVaker - Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode
2.6.42 to 3.2 gdyby lecieć według starej numeracji. :) Zamiast 2.6.40 mieliśmy już 3.0.
[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]
Offline
#22 2013-01-31 14:55:36
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode
Ale jednak jakaś egzotyka z tym jest w logu z ubuntu ;)
To dobry pretekst do sprawdzenia na jakimś normalnym Linuksie.
Ostatnio edytowany przez yossarian (2013-01-31 14:56:16)
Offline
#23 2013-01-31 15:00:07
ArnVaker - Kapelusznik
- ArnVaker
- Kapelusznik
- Skąd: Midgard
- Zarejestrowany: 2009-05-06
Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode
No fakt, ciekawe dlaczego 2.6.42 a nie 3.2. :) Z drugiej strony kernel maszyny na której został zbudowany ma jakieś szczególne znaczenie? W Debianie widywałem w logach przypadki gdy Xorg z danej wersji zbudowany został na kernelu z innej.
[img]http://svn.debianart.org/themes/generic/spinner/spinner48px-moreblue.png[/img]
Offline
#24 2013-01-31 15:07:23
yossarian - Szczawiożerca
- yossarian
- Szczawiożerca
- Skąd: Shangri-La
- Zarejestrowany: 2011-04-25
Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode
Może zobacz jeszcze na jakimś Fluxboxie. Teoretycznie nie powinno mieć znaczenia, ale ja tam nic nie widzę w tym logu.
I spróbuj przeładować lightdm:
Kod:
sudo service lightdm stop sudo service lightdm start
czy jak się to tam przełącza.
PS Mniej czasu zajmuje instalacja jakiegoś Debiana niż ciągłe naprawianie niedoróbek w Ubuntu.
Ostatnio edytowany przez yossarian (2013-01-31 15:11:37)
Offline
#25 2013-01-31 15:17:16
Jacekalex - Podobno człowiek...;)
- Jacekalex
- Podobno człowiek...;)
- Skąd: /dev/urandom
- Zarejestrowany: 2008-01-07
Re: [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode
Dla mnie dystrybucja, w której xserver-xorg-video-intel nie wstaje przy włączonym KMS w jaju, już byłaby uzasadnieniem, żeby sprawdzić innego.
Można oczywiście wyłączyć KMS, i ustawić ster Intela w xorg.conf, to jest jakieś wyjście i powinno działać, ale to w końcu ma być łatwy system dla początkujących
a nie jakiś LFS, żeby w nim grzebać. ;)
W dodatku karta Intel 4500HD, to nie jest jakiś niszowy produkt, który wyprodukowano w 50 egzemplarzach, i producent nie blokuje sterów na Linuxa, tylko udostępnia pełne API i stery.
[quote=ArnVaker]No fakt, ciekawe dlaczego 2.6.42 a nie 3.2. :) Z drugiej strony kernel maszyny na której został zbudowany ma jakieś szczególne znaczenie? W Debianie widywałem w logach przypadki gdy Xorg z danej wersji zbudowany został na kernelu z innej.[/quote]
2.6.42 to byłby raczej 3.0.2.
Natomiast w 3.2 ster Intela do KMS był praktycznie przepisany od zera, jak dodali obsługę zintegrowanych chipów Sandy (czy Ivy?).
Także przeważnie problemu nie ma, ale tutaj owszem, jest.
Gdyby dali w tym *buntu Xorga i ster Intela 1.11.4 budowanego na systemie z jajem 3.2, i sterem załadowanym z KMS, to raczej by działało bez problemu.
Tak samo, jak np w Debianie. ;-)
Pozdrawiam
;-)
Ostatnio edytowany przez Jacekalex (2013-01-31 15:30:52)
W demokracji każdy naród ma taką władzę, na jaką zasługuje ;)
Si vis pacem para bellum ;) | Pozdrawiam :)
Offline
- Forum Debian Users Gang
- » Pochodne Debiana: Ubuntu, Mint
- » [SOLVED] Ubuntu 12.04 gnome shell gma4500hd tylko fallback mode
Informacje debugowania
| Time (s) | Query |
|---|---|
| 0.00010 | SET CHARSET latin2 |
| 0.00005 | SET NAMES latin2 |
| 0.00139 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.227.209.214' WHERE u.id=1 |
| 0.00061 | REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '18.227.209.214', 1732225062) |
| 0.00045 | SELECT * FROM punbb_online WHERE logged<1732224762 |
| 0.00065 | SELECT topic_id FROM punbb_posts WHERE id=222930 |
| 0.00006 | SELECT id FROM punbb_posts WHERE topic_id=22850 ORDER BY posted |
| 0.00033 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=22850 AND t.moved_to IS NULL |
| 0.00027 | SELECT search_for, replace_with FROM punbb_censoring |
| 0.00362 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=22850 ORDER BY p.id LIMIT 0,25 |
| 0.00138 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=22850 |
| Total query time: 0.00891 s | |