Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!
Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.
Mam taki dziwny problem. Mianowicie po instalacji ubuntu 12.04, xubuntu 13.04, lubuntu 13.04 dostaje pozdrowienia po restarcie w postaci komunikatu "Operating System not found." Probowalem livecd, podmontowalem partycje, przeinstalowalem grub2, ktory byl zainstalowany i dalej to samo. Dziwi mnie fakt, ze po instalacji debian'a 7.1.0 grub dziala normalnie.
Jedyny system jaki jest zainstalowany to ubuntu 12.04.3 LTS. Caly dysk byl czyszczony przez instalator ubuntu.
Wynik z programu:
Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== => Windows is installed in the MBR of /dev/sdb. sdb1: __________________________________________________________________________ File system: vfat Boot sector type: FAT32 Boot sector info: According to the info in the boot sector, sdb1 starts at sector 0. But according to the info from fdisk, sdb1 starts at sector 2048. Operating System: Boot files: /efi/ubuntu/grubx64.efi /efi/ubuntu/shimx64.efi sdb2: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.04.3 LTS Boot files: /boot/grub/grub.cfg /etc/fstab sdb3: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sdb _____________________________________________________________________ Disk /dev/sdb: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sdb1 1 1,465,149,167 1,465,149,167 ee GPT GUID Partition Table detected. Partition Start Sector End Sector # of Sectors System /dev/sdb1 2,048 194,559 192,512 EFI System partition /dev/sdb2 194,560 1,457,862,655 1,457,668,096 Data partition (Windows/Linux) /dev/sdb3 1,457,862,656 1,465,147,391 7,284,736 Swap partition (Linux) "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sdb1 2BA9-1D52 vfat /dev/sdb2 ea496291-cf78-4298-b73f-7b61fa25a7d6 ext4 /dev/sdb3 0f21cffd-76cd-4b3e-89f2-c0979fa63101 swap /dev/sr0 iso9660 Ubuntu 12.04.3 LTS amd64 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sdb2 /media/ea496291-cf78-4298-b73f-7b61fa25a7d6 ext4 (rw,nosuid,nodev,uhelper=udisks) /dev/sr0 /cdrom iso9660 (ro,noatime) =========================== sdb2/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod efi_gop insmod efi_uga insmod video_bochs insmod video_cirrus } insmod part_gpt insmod ext2 set root='(hd0,gpt2)' search --no-floppy --fs-uuid --set=root ea496291-cf78-4298-b73f-7b61fa25a7d6 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_gpt insmod ext2 set root='(hd0,gpt2)' search --no-floppy --fs-uuid --set=root ea496291-cf78-4298-b73f-7b61fa25a7d6 set locale_dir=($root)/boot/grub/locale set lang=pl_PL insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.8.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='(hd0,gpt2)' search --no-floppy --fs-uuid --set=root ea496291-cf78-4298-b73f-7b61fa25a7d6 linux /boot/vmlinuz-3.8.0-29-generic.efi.signed root=UUID=ea496291-cf78-4298-b73f-7b61fa25a7d6 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.8.0-29-generic } menuentry 'Ubuntu, with Linux 3.8.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_gpt insmod ext2 set root='(hd0,gpt2)' search --no-floppy --fs-uuid --set=root ea496291-cf78-4298-b73f-7b61fa25a7d6 echo 'Loading Linux 3.8.0-29-generic ...' linux /boot/vmlinuz-3.8.0-29-generic.efi.signed root=UUID=ea496291-cf78-4298-b73f-7b61fa25a7d6 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.8.0-29-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_gpt insmod ext2 set root='(hd0,gpt2)' search --no-floppy --fs-uuid --set=root ea496291-cf78-4298-b73f-7b61fa25a7d6 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_gpt insmod ext2 set root='(hd0,gpt2)' search --no-floppy --fs-uuid --set=root ea496291-cf78-4298-b73f-7b61fa25a7d6 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### if [ "x${timeout}" != "x-1" ]; then if keystatus; then if keystatus --shift; then set timeout=-1 else set timeout=0 fi else if sleep --interruptible 3 ; then set timeout=0 fi fi fi ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sdb2/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda2 during installation UUID=ea496291-cf78-4298-b73f-7b61fa25a7d6 / ext4 errors=remount-ro 0 1 # /boot/efi was on /dev/sda1 during installation UUID=2BA9-1D52 /boot/efi vfat defaults 0 1 # swap was on /dev/sda3 during installation UUID=0f21cffd-76cd-4b3e-89f2-c0979fa63101 none swap sw 0 0 -------------------------------------------------------------------------------- =================== sdb2: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) = boot/grub/grub.cfg 1 = boot/initrd.img-3.8.0-29-generic 1 = boot/vmlinuz-3.8.0-29-generic 1 = boot/vmlinuz-3.8.0-29-generic.efi.signed 1 = initrd.img 1 = vmlinuz 1 =============================== StdErr Messages: =============================== awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in awk: cmd. line:36: Math support is not compiled in
Czy to moze byc przyczyna ?
=> Windows is installed in the MBR of /dev/sdb.
Tutaj jeszcze samo fdsik -l:
Disk /dev/sdb: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x2f018047 Device Boot Start End Blocks Id System /dev/sdb1 1 1465149167 732574583+ ee GPT Partition 1 does not start on physical sector boundary. Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x51279142 Device Boot Start End Blocks Id System /dev/sda1 63 488392064 244196001 7 HPFS/NTFS/exFAT
Pomoze ktos ? Brakuje mi juz pomyslow.
Offline
Mam taki dziwny problem. Mianowicie po instalacji ubuntu 12.04, xubuntu 13.04, lubuntu 13.04 dostaje pozdrowienia po restarcie w postaci komunikatu "Operating System not found." Probowalem livecd, podmontowalem partycje, przeinstalowalem grub2, ktory byl zainstalowany i dalej to samo. [b]Dziwi mnie fakt, ze po instalacji debian'a 7.1.0 grub dziala normalnie.[/b][/quote]
Tym się różni Debian od Ubuntu ;)
Offline
[quote=yossarian]
Mam taki dziwny problem. Mianowicie po instalacji ubuntu 12.04, xubuntu 13.04, lubuntu 13.04 dostaje pozdrowienia po restarcie w postaci komunikatu "Operating System not found." Probowalem livecd, podmontowalem partycje, przeinstalowalem grub2, ktory byl zainstalowany i dalej to samo. [b]Dziwi mnie fakt, ze po instalacji debian'a 7.1.0 grub dziala normalnie.[/b][/quote]
Tym się różni Debian od Ubuntu ;)[/quote]
Zanim napisalem ten post to spodziewalem sie peirwszej takiej wlasnie odpowiedzi. Problem rozwiazalem:
https://help.ubuntu.com/community/Boot-Repair
E-Booki: FreeBSD, OpenBSD, Linux, Hacking, PHP, Catia, Perl_CGI, Mysql ...
[b]http://unix-ebooki.neth.pl/[/b]
Offline
Ubuntu ma to (UEFI) jakoś inaczej rozwiązane niż Debian:
https://help.ubuntu.com/community/UEFI
Tak na przyszłość.
Offline
Time (s) | Query |
---|---|
0.00012 | SET CHARSET latin2 |
0.00006 | SET NAMES latin2 |
0.00130 | SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.116.43.109' WHERE u.id=1 |
0.00176 | UPDATE punbb_online SET logged=1732240167 WHERE ident='18.116.43.109' |
0.00059 | SELECT * FROM punbb_online WHERE logged<1732239867 |
0.00078 | SELECT topic_id FROM punbb_posts WHERE id=239664 |
0.00005 | SELECT id FROM punbb_posts WHERE topic_id=24155 ORDER BY posted |
0.00058 | SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=24155 AND t.moved_to IS NULL |
0.00005 | SELECT search_for, replace_with FROM punbb_censoring |
0.00146 | SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=24155 ORDER BY p.id LIMIT 0,25 |
0.00077 | UPDATE punbb_topics SET num_views=num_views+1 WHERE id=24155 |
Total query time: 0.00752 s |