Nie jesteś zalogowany.
Jeśli nie posiadasz konta, zarejestruj je już teraz! Pozwoli Ci ono w pełni korzystać z naszego serwisu. Spamerom dziękujemy!

Ogłoszenie

Prosimy o pomoc dla małej Julki — przekaż 1% podatku na Fundacji Dzieciom zdazyć z Pomocą.
Więcej informacji na dug.net.pl/pomagamy/.

#1  2013-08-29 11:18:17

  bryn1u - Użytkownik

bryn1u
Użytkownik
Zarejestrowany: 2009-04-17

Operating system not found ???

Mam taki dziwny problem. Mianowicie po instalacji ubuntu 12.04, xubuntu 13.04, lubuntu 13.04 dostaje pozdrowienia po restarcie w postaci komunikatu "Operating System not found." Probowalem livecd, podmontowalem partycje, przeinstalowalem grub2, ktory byl zainstalowany i dalej to samo. Dziwi mnie fakt, ze po instalacji debian'a 7.1.0 grub dziala normalnie.

Jedyny system jaki jest zainstalowany to ubuntu 12.04.3 LTS. Caly dysk byl czyszczony przez instalator ubuntu.
Wynik z programu:

Kod:

                  Boot Info Script 0.61      [1 April 2012]


============================= Boot Info Summary: ===============================

 => Windows is installed in the MBR of /dev/sdb.

sdb1: __________________________________________________________________________

    File system:       vfat
    Boot sector type:  FAT32
    Boot sector info:  According to the info in the boot sector, sdb1 starts 
                       at sector 0. But according to the info from fdisk, 
                       sdb1 starts at sector 2048.
    Operating System:  
    Boot files:        /efi/ubuntu/grubx64.efi /efi/ubuntu/shimx64.efi

sdb2: __________________________________________________________________________

    File system:       ext4
    Boot sector type:  -
    Boot sector info: 
    Operating System:  Ubuntu 12.04.3 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab

sdb3: __________________________________________________________________________

    File system:       swap
    Boot sector type:  -
    Boot sector info: 

============================ Drive/Partition Info: =============================

Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1                   1 1,465,149,167 1,465,149,167  ee GPT


GUID Partition Table detected.

Partition    Start Sector    End Sector  # of Sectors System
/dev/sdb1           2,048       194,559       192,512 EFI System partition
/dev/sdb2         194,560 1,457,862,655 1,457,668,096 Data partition (Windows/Linux)
/dev/sdb3   1,457,862,656 1,465,147,391     7,284,736 Swap partition (Linux)

"blkid" output: ________________________________________________________________

Device           UUID                                   TYPE       LABEL

/dev/loop0                                              squashfs   
/dev/sdb1        2BA9-1D52                              vfat       
/dev/sdb2        ea496291-cf78-4298-b73f-7b61fa25a7d6   ext4       
/dev/sdb3        0f21cffd-76cd-4b3e-89f2-c0979fa63101   swap       
/dev/sr0                                                iso9660    Ubuntu 12.04.3 LTS amd64

================================ Mount points: =================================

Device           Mount_Point              Type       Options

/dev/loop0       /rofs                    squashfs   (ro,noatime)
/dev/sdb2        /media/ea496291-cf78-4298-b73f-7b61fa25a7d6 ext4       (rw,nosuid,nodev,uhelper=udisks)
/dev/sr0         /cdrom                   iso9660    (ro,noatime)


=========================== sdb2/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  set have_grubenv=true
  load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
  set saved_entry="${prev_saved_entry}"
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
  insmod efi_gop
  insmod efi_uga
  insmod video_bochs
  insmod video_cirrus
}

insmod part_gpt
insmod ext2
set root='(hd0,gpt2)'
search --no-floppy --fs-uuid --set=root ea496291-cf78-4298-b73f-7b61fa25a7d6
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=auto
  load_video
  insmod gfxterm
  insmod part_gpt
  insmod ext2
  set root='(hd0,gpt2)'
  search --no-floppy --fs-uuid --set=root ea496291-cf78-4298-b73f-7b61fa25a7d6
  set locale_dir=($root)/boot/grub/locale
  set lang=pl_PL
  insmod gettext
fi
terminal_output gfxterm
if [ "${recordfail}" = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
  clear
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
function gfxmode {
    set gfxpayload="${1}"
    if [ "${1}" = "keep" ]; then
        set vt_handoff=vt.handoff=7
    else
        set vt_handoff=
    fi
}
if [ "${recordfail}" != 1 ]; then
  if [ -e ${prefix}/gfxblacklist.txt ]; then
    if hwmatch ${prefix}/gfxblacklist.txt 3; then
      if [ ${match} = 0 ]; then
        set linux_gfx_mode=keep
      else
        set linux_gfx_mode=text
      fi
    else
      set linux_gfx_mode=text
    fi
  else
    set linux_gfx_mode=keep
  fi
else
  set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 3.8.0-29-generic' --class ubuntu --class gnu-linux --class gnu --class os {
    recordfail
    gfxmode $linux_gfx_mode
    insmod gzio
    insmod part_gpt
    insmod ext2
    set root='(hd0,gpt2)'
    search --no-floppy --fs-uuid --set=root ea496291-cf78-4298-b73f-7b61fa25a7d6
    linux    /boot/vmlinuz-3.8.0-29-generic.efi.signed root=UUID=ea496291-cf78-4298-b73f-7b61fa25a7d6 ro   quiet splash $vt_handoff
    initrd    /boot/initrd.img-3.8.0-29-generic
}
menuentry 'Ubuntu, with Linux 3.8.0-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
    recordfail
    insmod gzio
    insmod part_gpt
    insmod ext2
    set root='(hd0,gpt2)'
    search --no-floppy --fs-uuid --set=root ea496291-cf78-4298-b73f-7b61fa25a7d6
    echo    'Loading Linux 3.8.0-29-generic ...'
    linux    /boot/vmlinuz-3.8.0-29-generic.efi.signed root=UUID=ea496291-cf78-4298-b73f-7b61fa25a7d6 ro recovery nomodeset 
    echo    'Loading initial ramdisk ...'
    initrd    /boot/initrd.img-3.8.0-29-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
    insmod part_gpt
    insmod ext2
    set root='(hd0,gpt2)'
    search --no-floppy --fs-uuid --set=root ea496291-cf78-4298-b73f-7b61fa25a7d6
    linux16    /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
    insmod part_gpt
    insmod ext2
    set root='(hd0,gpt2)'
    search --no-floppy --fs-uuid --set=root ea496291-cf78-4298-b73f-7b61fa25a7d6
    linux16    /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
  if keystatus; then
    if keystatus --shift; then
      set timeout=-1
    else
      set timeout=0
    fi
  else
    if sleep --interruptible 3 ; then
      set timeout=0
    fi
  fi
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/30_uefi-firmware ###
### END /etc/grub.d/30_uefi-firmware ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f  $prefix/custom.cfg ]; then
  source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------

=============================== sdb2/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    nodev,noexec,nosuid 0       0
# / was on /dev/sda2 during installation
UUID=ea496291-cf78-4298-b73f-7b61fa25a7d6 /               ext4    errors=remount-ro 0       1
# /boot/efi was on /dev/sda1 during installation
UUID=2BA9-1D52  /boot/efi       vfat    defaults        0       1
# swap was on /dev/sda3 during installation
UUID=0f21cffd-76cd-4b3e-89f2-c0979fa63101 none            swap    sw              0       0
--------------------------------------------------------------------------------

=================== sdb2: Location of files loaded by Grub: ====================

           GiB - GB             File                                 Fragment(s)

               =                boot/grub/grub.cfg                             1
               =                boot/initrd.img-3.8.0-29-generic               1
               =                boot/vmlinuz-3.8.0-29-generic                  1
               =                boot/vmlinuz-3.8.0-29-generic.efi.signed       1
               =                initrd.img                                     1
               =                vmlinuz                                        1

=============================== StdErr Messages: ===============================

awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in
awk: cmd. line:36: Math support is not compiled in

Czy to moze byc przyczyna ?

Kod:

=> Windows is installed in the MBR of /dev/sdb.

Tutaj jeszcze samo fdsik -l:

Kod:

Disk /dev/sdb: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 4096 bytes
I/O size (minimum/optimal): 4096 bytes / 4096 bytes
Disk identifier: 0x2f018047

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1               1  1465149167   732574583+  ee  GPT
Partition 1 does not start on physical sector boundary.

Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x51279142

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1              63   488392064   244196001    7  HPFS/NTFS/exFAT

Pomoze ktos ? Brakuje mi juz pomyslow.


E-Booki: FreeBSD, OpenBSD, Linux, Hacking, PHP, Catia, Perl_CGI, Mysql ...
[b]http://unix-ebooki.neth.pl/[/b]

Offline

 

#2  2013-08-29 11:26:34

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: Operating system not found ???

Mam taki dziwny problem. Mianowicie po instalacji ubuntu 12.04, xubuntu 13.04, lubuntu 13.04 dostaje pozdrowienia po restarcie w postaci komunikatu "Operating System not found." Probowalem livecd, podmontowalem partycje, przeinstalowalem grub2, ktory byl zainstalowany i dalej to samo. [b]Dziwi mnie fakt, ze po instalacji debian'a 7.1.0 grub dziala normalnie.[/b][/quote]
Tym się różni Debian od Ubuntu ;)

Offline

 

#3  2013-08-29 12:19:00

  bryn1u - Użytkownik

bryn1u
Użytkownik
Zarejestrowany: 2009-04-17

Re: Operating system not found ???

[quote=yossarian]

Mam taki dziwny problem. Mianowicie po instalacji ubuntu 12.04, xubuntu 13.04, lubuntu 13.04 dostaje pozdrowienia po restarcie w postaci komunikatu "Operating System not found." Probowalem livecd, podmontowalem partycje, przeinstalowalem grub2, ktory byl zainstalowany i dalej to samo. [b]Dziwi mnie fakt, ze po instalacji debian'a 7.1.0 grub dziala normalnie.[/b][/quote]
Tym się różni Debian od Ubuntu ;)[/quote]
Zanim napisalem ten post to spodziewalem sie peirwszej takiej wlasnie odpowiedzi. Problem rozwiazalem:

https://help.ubuntu.com/community/Boot-Repair


E-Booki: FreeBSD, OpenBSD, Linux, Hacking, PHP, Catia, Perl_CGI, Mysql ...
[b]http://unix-ebooki.neth.pl/[/b]

Offline

 

#4  2013-08-29 12:28:38

  yossarian - Szczawiożerca

yossarian
Szczawiożerca
Skąd: Shangri-La
Zarejestrowany: 2011-04-25

Re: Operating system not found ???

Ubuntu ma to (UEFI) jakoś inaczej rozwiązane niż Debian:
https://help.ubuntu.com/community/UEFI
Tak na przyszłość.

Offline

 

Stopka forum

Powered by PunBB
© Copyright 2002–2005 Rickard Andersson
To nie jest tylko forum, to nasza mała ojczyzna ;-)

[ Generated in 0.019 seconds, 11 queries executed ]

Informacje debugowania

Time (s) Query
0.00010 SET CHARSET latin2
0.00004 SET NAMES latin2
0.00095 SELECT u.*, g.*, o.logged FROM punbb_users AS u INNER JOIN punbb_groups AS g ON u.group_id=g.g_id LEFT JOIN punbb_online AS o ON o.ident='18.191.212.146' WHERE u.id=1
0.00080 REPLACE INTO punbb_online (user_id, ident, logged) VALUES(1, '18.191.212.146', 1732217835)
0.00043 SELECT * FROM punbb_online WHERE logged<1732217535
0.00065 SELECT topic_id FROM punbb_posts WHERE id=239665
0.00279 SELECT id FROM punbb_posts WHERE topic_id=24155 ORDER BY posted
0.00583 SELECT t.subject, t.closed, t.num_replies, t.sticky, f.id AS forum_id, f.forum_name, f.moderators, fp.post_replies, 0 FROM punbb_topics AS t INNER JOIN punbb_forums AS f ON f.id=t.forum_id LEFT JOIN punbb_forum_perms AS fp ON (fp.forum_id=f.id AND fp.group_id=3) WHERE (fp.read_forum IS NULL OR fp.read_forum=1) AND t.id=24155 AND t.moved_to IS NULL
0.00015 SELECT search_for, replace_with FROM punbb_censoring
0.00224 SELECT u.email, u.title, u.url, u.location, u.use_avatar, u.signature, u.email_setting, u.num_posts, u.registered, u.admin_note, p.id, p.poster AS username, p.poster_id, p.poster_ip, p.poster_email, p.message, p.hide_smilies, p.posted, p.edited, p.edited_by, g.g_id, g.g_user_title, o.user_id AS is_online FROM punbb_posts AS p INNER JOIN punbb_users AS u ON u.id=p.poster_id INNER JOIN punbb_groups AS g ON g.g_id=u.group_id LEFT JOIN punbb_online AS o ON (o.user_id=u.id AND o.user_id!=1 AND o.idle=0) WHERE p.topic_id=24155 ORDER BY p.id LIMIT 0,25
0.00292 UPDATE punbb_topics SET num_views=num_views+1 WHERE id=24155
Total query time: 0.0169 s